Polymerization of coordinated monomers. II. Stereoregulation in the free-radical polymerization of methacrylonitrile–zinc chloride or methacrylonitrile–stannic chloride complexes

The effect of complex formation on stereoregulation in free-radical polymerization was studied. Complexes of methacrylonitrile with ZnCl₂ and SnCl₄ were prepared and their properties and structures examined. The complexes were polymerized by initiation of α,α′-azobisisobutyronitrile or by irradiation with γ-rays from a⁶⁰Co source or ultraviolet rays either in solution or in bulk at various temperatures ranging from ?78 to 100°C. The triad tacticities of the resulting polymethacrylonitrile were determined by converting it to poly(methyl methacrylate) for NMR spectroscopy. The radicals in complexed forms were studied by ESR spectroscopy with the polymerization system in toluene irradiated with ultraviolet rays at ?120°C. The tacticities of the resulting polymers and their dependencies on the polymerization temperature were found to be characteristic of the complex species, i.e., the kind of metal chloride and the stoichiometry, being different from the tacticities and the dependencies, respectively, of the polymer obtained with pure methacrylonitrile. The 2:1 and the 1:1 complexes with SnCl₄ were found to give an eleven-line and a nine-line spectrum, respectively. On the basis of the results of both the tacticities and the ESR spectra, it was estimated that the proportion of the intracomplex reaction was 40%, and that the probabilities of isotactic diad addition of intra- and intercomplex reaction were 0.70 and 0.48, respectively.     

Polymerization of coordinated monomers. V. Polymerization of methyl methacrylate–Lewis acid complexes

The polymerization of the complex of methyl methacrylate with stannic chloride, aluminum trichloride, or boron trifluoride was carried out in toluene solution at several temperatures in the range of 60° to ?78°C by initiation of α,α′-azobisisobutyronicrile or by irradiation with ultraviolet rays. The tacticities of the resulting polymers were determined by NMR spectroscopy. Both the 1:1 and the 2:1 methyl methacrylate–SnCl₄ complexes gave polymers with similar tacticities at the polymerization temperatures above ?60°C. With decreasing temperature below ?60°C, the isotacticity was more favored for the 2:1 complex, whereas the tacticities did not change for the 1:1 complex. On the ESR spectroscopy of the polymerization solution under the irradiation of ultraviolet rays at ?120°C, the 1:1 SnCl₄ complex gave a quintet, while the 2:1 SnCl₄ complex gave both a quintet and a sextet. The sextet became weaker with increasing temperature and disappeared at ?60°C. This behavior of the sextet corresponds to the change of the tacticities of polymer for the 2:1 SnCl₄ complex. An intra–intercomplex addition was suggested for the polymerization of the 2:1 complex, which took a cis-configuration on the basis of its infrared spectra. The sextet can be ascribed to the radical formed by the intracomplex addition reaction, while the quintet can correspond to that formed by the intercomplex addition reaction. The proportion of the intracomplex reaction was estimated to be about 0.25 at ?75°C, and the calculated value of the probability of isotactic diad addition of the intracomplex reaction was found to be almost unity.     

Polymerization of coordinated monomers. III. Copolymerization of acrylonitrile–zinc chloride,methacrylonitrile–zinc chloride or methyl methacrylate–zinc chloride complex with styrene

The 1:1 or 2:1 complex of acrylonitrile, methacrylonitrile, or methyl methacrylate with ZnCl₂ was copolymerized with styrene at the temperature of 0–30°C without any initiator. The structure of the copolymer from methyl methacrylate complex and styrene was examined by NMR spectroscopy. The complexes of acrylonitrile or methacrylonitrile with ZnCl₂ gave a copolymer containing about 50 mole-% styrene units. The complexes of methyl methacrylate yielded an alternating copolymer when the feed molar ratio of methyl methacrylate to styrene was small, but with increasing feed molar ratio the resulting copolymer consisted of about 2 moles of methyl methacrylate per mole of styrene. The formation of a charge-transfer complex of styrene with a monomer coordinated to zinc atom was inferred from the ultraviolet spectra. The regulation of the copolymerization was considered to be effected by the charge-transfer complex. The copolymer resulting from the 2:1 methyl methacrylate–zinc chloride complex had no specific tacticity, whereas the copolymer from the 1:1 complex was richer in coisotacticity than in cosyndiotacticity. The change of the composition of the copolymer and its specific tacticity in the polymerization of the methyl methacrylate complex is related to the structure of the complex.     

Vinyl polymerization by metal complexes. III. Vinyl polymerization initiated by oligoamide and cupric ion system

Polymerization of methyl methacrylate and other vinyl monomers was studied in the presence of oligoamide (?-aminocaproic acid, its dimer, trimer, tetramer, and pentamer) and cupric ion in aqueous media. The polymerization was found to be of free-radical character and selective for the type of vinyl monomer. Carbon tetrachloride can accelerate the polymerization. The initiation mechanism of the polymerization is discussed. Spectroscopic measurements were indicative of formation of 1:1 complex between oligoamides and cupric ion in aqueous NaClO₄ solution. Some chemical and physical properties of the resulting polymers were measured.     

Tacticity control in the radical polymerization of 2,2,2-trifluoroethyl methacrylate with fluoroalcohol

The free-radical polymerization of 2,2,2-trifluoroethyl methacrylate (TEMA) was carried out in fluoroalcohols to achieve stereoregulation. The polymerization reactivity at low temperature and syndiotactic specificity were enhanced by the use of fluoroalcohol as a solvent. The polymer having triad syndiotacticity (rr) of 70% was obtained in perfluoro-t-butyl alcohol. It was noted that the stereochemistry was nearly independent of reaction temperature. The stereoeffect of fluoroalcohols seemed to be due to the hydrogen-bonding interaction between the alcohol and the monomer or growing species. The hydrogen-bonding formation was determined by FTIR. The copolymerization of TEMA with methyl methacrylate (MMA) in hexafluoroisopropanol afforded a copolymer with syndiotactic specificity. By this method, a cladding material for an optical fiber based on poly(methyl methacrylate) (PMMA) with high mechanical strength and low refractive index could be obtained.     

Polymerization of coordinated monomers. IV. Copolymerization of methyl methacrylate– and methacrylonitrile–Lewis acid complexes with styrene

Complexes of methyl methacrylate and methacrylonitrile with Lewis acids (SnCl₄, AlCl₃, and BF₃) were copolymerized with styrene at ?75°C under irradiation with a high-pressure mercury lamp in toluene solution. The resulting copolymers consisted of equimolar amount of methyl methacrylate or methacrylonitrile and styrene, regardless of the molar ratio of monomers in the feed. NMR spectroscopy showed the copolymers to have an alternate sequence. The tacticities of the copolymers varied with the complex to have an alternate sequence. The tacticities of the copolymers varied with the complex species: the copolymer from the SnCl₄ complex system had a higher cosyndiotactieity, while those from the AlCl₃ and the BF₃ complex systems showed coisotacticity to predominate over cosyndiotacticity. NMR spectroscopic investigation of the copolymerization system indicated the presence of a charge-transfer complex between the styrene and the methyl methacrylate coordinated to SnCl₄. The concentration of the charge-transfer complex was estimated to be about 30% of monomer pairs at ?78°C at a 1:1 molar ratio of feed. The growing end radicals were identified as a methyl methacrylate radical for the AlCl₃ complex–styrene system and a styrene radical for the SnCl₄ complex–styrene system by the measurement of the ESR spectra of the copolymerization systems under or after irradation with a high-pressure mercury lamp. The tacticity of the resulting polymer appears to be controlled by the structure of the charge transfer complex. In the case of the SnCl₄ complex a certain interaction of SnCl₄ with the growing end radical seems to be a factor controlling the polymer structure. These copolymerizations can be explained by an alternating charge-transfer complex copolymerization scheme.     

Polymerization of surface-active monomers. VIII. Tacticity of polymers prepared by radical polymerization of quaternary salts of dimethylaminoethyl methacrylate in micellar and isotropic media

The effect of monomer micellization on the polymerization was studied from the standpoint of stereochemistry in the polymerization. Quaternary salts (C_nBr) of dimethylaminoethyl methacrylate with n-alkyl bromide having N (=4, 8 and 12) carbon atoms were polymerized with radical initiators in isotropic and anisotropic media and the resulting polymers were converted to poly (methyl methacrylate) (PMMA) to determine their tacticity. Tacticities of poly (C₁₂Br)s were little affected by initiators and solvents used for their preparations. There was little dependence of the tacticities on alkyl chain length (N) for poly (C_nBr)s prepared in water and dimethylformamide (DMF). Most of polymers produced here conformed to Bernoullian propagation statistics and a definite difference was not found in the tacticities between the polymers prepared in isotropic and anisotropic media. From the results obtained here it was deduced that the micellar aggregation has little influence upon the stereochemistry in the polymerization of the quaternary monomers. © 1994 John Wiley & Sons, Inc.     

Catalytic action of metallic salts in autoxidation and polymerization. IX. Polymerization of methyl methacrylate with sodium hexanitrocobaltate(III) in mixed solvent of acetone and water

Polymerization of methyl methacrylate with some cobalt (III) complexes was carried out in various solvents and in mixed solvents of acetone and water or alcohols. Sodium hexanitrocobaltate(III) was found to be an effective initiator in mixed solvent of water and acetone. The kinetic study on the polymerization of methyl methacrylate with Na₃[Co(NO₂)₆] in a water-acetone mixed solvent gave the following over-all rate equation: R_p = 8.04 × 10⁴ exp{ ?13,500/RT} [I]^1/2[M]² (mol/1.?sec). The effects of various additives on polymerization rate and the copolymerization curve with styrene suggest that polymerization proceeds via a radical mechanism. The dependence of the polymerization rate on the square of monomer concentration and the spectroscopic data were indicative of the formation of a complex between initiator and monomer.     

Polymerization initiated by an electron donor–acceptor complex. Part I. Polymerization of methyl methacrylate initiated by liquid sulfur dioxide–pyridine complex in the presence of carbon tetrachloride

The polymerization of methyl methacrylate can be initiated by a charge-transfer complex of liquid sulfur dioxide and pyridine in the presence of carbon tetrachloride. The molar ratio of sulfur dioxide and pyridine which participated in the complex was found from a spectrophotometric study to be 2:1. The polymerization proceeds through free-radical intermediates. The overall rate of polymerization is proportional to the square root of the concentration of the complex, and the values of k_p/k_t^1/2 under the various polymerization conditions were satisfactorily consistent with the literature value. For the activation energy of the overall reaction, 8.2 kcal./mole was obtained, and for initiation, 9.7 kcal./mole was evaluated from the values of k_p/k_t^1/2. It was deduced from a kinetic mechanism for the initiation that a primary radical may be produced from the reduction of carbon tetrachloride by an associated complex consisting of liquid sulfur dioxide–pyridine complex and the monomer.     

Radical polymerization of methyl methacrylate in the presence of Fe(III) and Co(III) porphyrins

The free-radical polymerization of methyl methacrylate in the presence of chlorine-containing complexes of Fe(III) with 5,10,15,20-tetrakis(3′,5′-di-tert-butylphenyl)porphyrin and 5,10,15,20-tetrakis(3′-butoxyphenyl)porphyrin, as well as in the presence of the acetate complex of Co(III) 5,10,15,20-tetrakis(3′,5′-di-tert-butylphenyl)porphyrin, has been investigated. The kinetic features of the process and the molecular mass characteristics of polymers are studied, and a feasible polymerization mechanism is proposed.     

Polymerization initiated by an electron donor–acceptor complex. Part IV. Kinetic study of polymerization of methyl methacrylate initiated by the charge-transfer complex consisting of poly-2-vinylpyridine and liquid sulfur dioxide

A kinetic study has been made of the polymerization of methyl methacrylate (MMA) initiated by a charge-transfer complex of poly-2-vinylpyridine (electron donor) and liquid sulfur dioxide (acceptor) in the presence of carbon tetrachloride. It is concluded that the polymerization proceeds through free-radical intermediates, as with the pyridine-liquid sulfur dioxide complex system. The association constants K of acceptor and polymer electron donors which range widely in their molecular weight were determined spectrophotometrically, and it has been found that both K and overall rate of polymerization R_p of MMA decrease with increasing molecular weight of polymer donor; contrary to this, molecular weight of PMMA formed increases with increasing molecular weight of the polymer donor. Other kinetic behaviors was essentially the same as in the pyridine–liquid sulfur dioxide system, i.e., R_p is proportional to the square root of the concentration of the complex and to the 3/2-order of the monomer concentration; R_p is clearly sensitive to the carbon tetrachloride concentration at low concentration of carbon tetrachloride, but for a higher concentration it is practically independent of the carbon tetrachloride concentration. It has been deduced from a kinetic mechanism for the initiation that a primary radical may be produced from the reduction of carbon tetrachloride by an associated complex consisting of liquid sulfur dioxide–polymer donor and the monomer.     

Sodium hydride-initiated polymerizations of vinyl monomers in aprotic solvents

Polymerizations of several vinyl monomers at 25°C in aprotic solvents (dimethyl sulfoxide, N,N-dimethylacetamide, and hexamethylphosphoric triamide) using sodium hydride dispersion as initiator yield low to intermediate molecular weight polymers. The molecular weight of the resulting polymer as well as the mode of initiation depends on the monomer and aprotic solvent used. Initiation of polymerization of monomers with available α hydrogens (methyl acrylate, acrylonitrile) involves monomer anion, while initiation of a monomer with no α hydrogen (methyl methacrylate) proceeds by a more complex mechanism. In contrast, initiation of styrene and α-methylstyrene proceeds by dimsyl anion addition to monomer in dimethylsulfoxide. Although the triad tacticities and number-average molecular weights of poly(methyl methacrylate) samples obtained from all three aprotic solvents are nearly the same, poly(methyl methacrylates) prepared in dimethyl sulfoxide and N,N-dimethylacetamide give polymers having polydispersities of ～3, while a very polydisperse polymer is obtained in hexamethylphosphoric triamide.     

Anionic graft polymerization of methyl methacrylate on starch and dextrin

The anionic graft polymerization of methyl methacrylate on the potassium alkoxide derivative of starch or dextrin in DMSO was studied. The effects of monomer and alkoxide concentrations as well as temperature were investigated. The yield of graft polymer increased with increasing alkoxide concentration. With increasing monomer concentration and with increasing temperature the extent of homopolymer formation increased. The composition of the graft polymers was found to depend on the reaction conditions. Graft polymers having about 10–40% poly(methyl methacrylate) were obtained. There were quantitative differences in yield of isolated graft polymer between starch and dextrin and these were ascribed to differences in the solubility properties of the carbohydrates. Evidence on the structure of the graft polymers and on the mechanism of the graft polymerization was obtained from acid hydrolysis of the graft polymers and determination of the molecular weights of the cleaved side chains.     

Polymerization of methyl methacrylate using a metallocene catalyst system

Methyl methacrylate was polymerized with Cp₂YCl(THF) or IVB group metallocene compounds (i.e., Cp₂ZrCl₂ and Cp₂HfCl₂, etc.), in the presence of a Lewis acid like Zn(C₂H₅)₂. The Lewis acid was complexed with methyl methacrylate, which avoided the metallocene compounds being poisoned with a functional group. A living polymerization was promoted through the use of metallocene/MAO/Zn(C₂H₅)₂, which gave tactic poly(methyl methacrylate) with a high molecular weight. The polymer yield increases with polymerization time, which indicates that the propagation rate is zero in order in the concentration of the monomer. The polymer yield increases also with the concentration of Cp₂YCl(THF), which indicates the yttrocene to be the real catalyst. When the polymerization temperature exceeds room temperature, the poly(methyl methacrylate) cannot be synthesized by the Cp₂YCl(THF) catalyst. When the reaction temperature reachs −60 °C, the poly(methyl methacrylate) is high syndiotatic and molecular weight by the Cp₂YCl(THF)/MAO catalyst system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1184–1194, 2000     

Use of the NiBr2(PPh3)2/Zn catalytic system for homo- and copolymerization of styrene and methyl methacrylate

The regularities of methyl methacrylate and styrene (co)polymerization in the presence of catalytic systems based on a Ni(II) complex combined with zinc and an aryl halide have been studied. The effects of temperature and catalytic system components on conversion are established. The molecular masses of the polymers linearly increase with monomer conversion, thus suggesting the controlled character of the polymerization. Reactivity ratios are calculated for methyl methacrylate-styrene copolymerization (r _MMA = 0.45, r _styrene = 1.70) in the presence of NiBr₂(PPh₃)₂/Zn/PhI. The rate of copolymerization is shown to decrease with an increase in methyl methacrylate concentration. The scheme of the process is proposed based on an analysis of the experimental and literature data.     

Metal chelates in vinyl polymerization. I. Ferric dipivaloylmethide as an initiator

The behavior of the chelate, ferric dipivaloylmethide, Fe(DPM)₃, in vinyl polymerization systems was investigated. The polymerization was found to be of free-radical nature. The rate of polymerization was proportional to the square root of the concentration of the chelate. The monomer exponent was close to 1.5 for the Fe(DPM)₃-initiated polymerization of styrene and methyl methacrylate. The kinetic and transfer constants and activation energies for these systems have been evaluated. Spectral studies revealed the possibility of a complex formation between the chelate and the monomer. A kinetic scheme for the Fe(DPM)₃-initiated polymerization is derived based on this initial complex formation.     

Macroinitiators of controlled free-radical polymerization of methyl methacrylate that are based on the tributyl boron-naphthoquinone system

Methods of preparing prepolymers with M = (2–5) × 10⁴ via the free-radical polymerization of methyl methacrylate in the presence of tri-n-butyl boron and 1,4-naphthoquinone at 30–45°C are developed. ¹H NMR spectroscopy measurements show that, in the prepolymer, the ratio between the enchained aromatic structures and the monomer units is 3: 1000. The activation energy for the postpolymerization of MMA initiated by the prepolymer is found to be 39.3 kJ/mol, and the molecular mass of the prepolymer is (0.8–1.2) × 10⁶. The effect of small amounts of acrylates and phosphonium salts on the polymerization of methyl methacrylate and the molecular mass of the polymers is investigated. It is demonstrated that, when polymerization is conducted in the presence of ionic liquids at concentrations commensurable with the concentration of aromatic fragments enchained into the prepolymer, the rate of the process decreases.     

The Relationship of Reaction Temperature,Tg and Rich‐Syndiotacticity of Poly(alkyl methacrylate)s in Modified Microemulsion Polymerization

Nanoscale poly(alkyl methacrylate)s including poly(methyl methacrylate), poly(ethyl methacrylate), poly(cyclohexyl methacrylate), poly(iso‐butyl methacrylate) and poly(benzyl methacrylate) were prepared by a modified microemulsion polymerization procedure. NMR analysis suggested that these poly(methacrylate)s samples were higher in syndiotactic content, lower in isotactic content and the glass transition temperatures (T_gs) of them were also higher than those reported in the literature. The tacticities of the poly(methacrylate)s, beside the restricted volume effect of nanoparticles during the modified microemulsion polymerization, were mainly influenced by the reaction temperature, the lower the reaction temperature, the higher the syndiotacticity of the products. The syndiotacticity of the product decreased obviously when the polymerization was carried out at a temperature far above the T_g of the resulting polymer. It was also shown that the tacticity of the polymer was affected by the monomer structure, a monomer with the bulkier alkyl side group would liable to result in a polymer with richer syndiotacticity. Possible mechanism of rich‐syndiotacticity was also discussed.     

New polymers and copolymers based on 1-trifluoromethyl-1-ferrocenyl-2,2,2-trifluoroethyl methacrylate

Carbon-chain ferrocene-fluoro-containing (co)polymers are synthesized by the free-radical polymerization of 1-trifluoromethyl-1-ferrocenyl-2,2,2-trifluoroethyl methacrylate and its copolymerization with methyl methacrylate in organic solvents and supercritical carbon dioxide. The structures, solubilities, molecular masses, and thermal characteristics of these (co)polymers are studied. It is found that the introduction of 1–5 mol % of the ferrocene-fluoro-containing monomer in the chain of poly(methyl methacrylate) improves its thermal resistance and thermo-oxidative stability.     

Polymerization of methyl methacrylate by metallocene imido complexes and tris(pentafluorophenyl)alane

The polymerization of methyl methacrylate (MMA) was investigated with tris(pentafluorophenyl)alane [Al(C₆F₅)₃] and four metallocene imido complexes that varied in the complex symmetry/chirality, metal, and R group in the ?NR moiety, as well as a zirconocene enolate preformed from the imido zirconocene and MMA. This study examined four aspects of MMA polymerization: the effects of the metallocene imido complex structure on the polymerization activity and polymer tacticity, the degree of polymerization control, the elementary reactions of the imido complex with Al(C₆F₅)₃ and MMA, and the polymerization kinetics and mechanism. There was no effect of the imido complex symmetry/chirality on the polymerization stereochemistry; the polymerization followed Bernoullian statistics, producing syndiotactic poly(methyl methacrylate)s with moderate (～70% [rr]) to high (～91% [rr]) syndiotacticity, depending on the polymerization temperature. Polymerization control was demonstrated by the number‐average molecular weight, which increased linearly with an increase in the monomer conversion to 100%, and the relatively small and insensitive polydispersity indices (from 1.21 to 1.17) to conversion. The reactions of the zirconocene imido complex with Al(C₆F₅)₃ and MMA produced the parent base‐free imido complex and the [2 + 4] cycloaddition product (i.e., zirconocene enolate), respectively; the latter product reacted with Al(C₆F₅)₃ to generate the active zirconocenium enolaluminate. The MMA polymerization with the metallocene imido complex and the alane proceeded via intermolecular Michael addition of the enolaluminate to the alane‐activated MMA involved in the propagation step. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3132–3142, 2003