Impact of fluorine on the phase behavior of bis-p-tolyl propane in supercritical CO2, 1,1-difluoroethane,and 1,1,1,2-tetrafluoroethane

Fluorine substitution on a solute can have a significant effect on solute solubility in a given solvent and fluorine substitution on a solvent can also have a significant effect on solvent quality. The effect of fluorine is demonstrated with the phase behavior data for bis(p-tolyl)propane (BTP) compared to bis(p-tolyl)hexafluoropropane (BTHFP) in supercritical carbon dioxide, 1,1-difluoroethane (F152a), and 1,1,1,2-tetrafluoroethane (F134a). Semifluorinated BTHFP is more soluble than non-fluorinated BTP in all three solvents, especially CO₂. The CO₂–BTP system exhibits solid solubility behavior while the CO₂–BTHFP system exhibits liquid–liquid–vapor (LLV) behavior near the critical point of CO₂. Although the two dipolar hydrofluorocarbons (HFC) are better solvents than CO₂ for these two aromatic solid compounds, F152a is the superior HFC solvent, especially for BTP, because F152a has a smaller molar volume and a larger effective dipole moment than F134a. LLV behavior is also observed for the F134a–BTP system near the critical point of F134a although the F134a–BTHFP, F152a–BTP, and F152a–BTHFP systems all appear to exhibit type-I phase behavior and no liquid–liquid immiscibility near the respective critical points.     

Prediction and experimental verification of the salt effect on the vapour–liquid equilibrium of water–ethanol–2-propanol mixture

Experimental vapour–liquid equilibria of water–ethanol–2-propanol saturated with NaNO₃, NaCl, KCl and containing 0.05 mol CH₃COOK/mol total solvent compared well with those predicted by Tan–Wilson and Tan–non-random two liquid (NRTL) models for multicomponent solvent–solute mixture using a set of solvent–solvent interaction parameters obtained from the regression of the vapour–liquid equilibrium of the solvent mixture without the dissolved solute and a set of solute–solvent interaction parameters calculated from the bubble points of the individual solvent components saturated or containing the same molar ratio of solute/total solvents as the mixture. The results also showed that a solvent component i is salted-in or out of the liquid phase relatively more than solvent component j would depend on whether A_sj/A_si (Tan–Wilson model) or exp(τ_is−τ_js) (Tan–NRTL model) is less or greater than 1. This is consistent with earlier publications on the effect of dissolved solutes (electrolytes and non-electrolytes) on the binary solvents mixtures. These findings confirmed that Tan–Wilson and Tan–NRTL models for multicomponent solvent–solute system can provide an accurate and rapid screening of electrolytes and non-electrolytes for their suitability in facilitating solvent separation by salt distillation of ternary solvent mixtures simply by determining the relative ratios of the solute–solvent interaction parameters from the respective bubble points of the solvent components containing the dissolved solute. The results also suggest that this may also be extended to other multicomponent solvent mixtures.     

Morphology study of Nafion membranes prepared by solutions casting

The structures of Nafion membranes prepared by solutions casting from low aliphatic alcohols/water mixture solvents and N,N′‐dimethyl formamide (DMF) solvent were investigated using differential scanning calorimeter and small angle X‐ray scattering. The aggregation behavior of Nafion molecules in the casting solutions was also investigated using dynamic light scattering. We show that the morphology of membranes was strongly influenced by the conformations of Nafion molecules in the solutions. In aliphatic alcohol/water mixture solvents, which have a worse compatibility with Nafion backbones, the Nafion molecules aggregate and form fringed rod‐like structures. These primary rod‐like structures then aggregate again through fringed side chains to form secondary ionic aggregations. In DMF solvent, owing to its better compatibility with Nafion backbones, less Nafion molecules aggregate. The high degree of Nafion molecular aggregations in aliphatic alcohol/water mixture solvents leads to a high degree of hydrophobic and hydrophilic phase separation for membranes prepared by casting from Nafion/aliphatic alcohol/water solutions. However, the lower degree of molecular aggregations in DMF solvent results in a lower degree of hydrophobic and hydrophilic phase separation for membranes prepared by casting from Nafion/DMF solution. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3044–3057, 2005     

Synthesis of well‐defined star‐shaped poly(ε‐caprolactone)/poly(ethylbene glycol) amphiphilic conetworks by combination of ring opening polymerization and “click” chemistry

Well‐defined star‐shaped hydrophobic poly(ε‐caprolactone) (PCL) and hydrophilic poly(ethylene glycol) (PEG) amphiphilic conetworks (APCNs) have been synthesized via the combination of ring opening polymerization (ROP) and click chemistry. Alkyne‐terminated six arm star‐shaped PCL (6‐s‐PCLx‐C?CH) and azido‐terminated PEG (N₃‐PEG‐N₃) are characterized by ¹H NMR and FT‐IR. The swelling degree of the APCNs is determined both in water and organic solvent. This unique property of the conetworks is dependent on the nanophase separation of hydrophilic and hydrophobic phases. The morphology and thermal behaviors of the APCNs are investigated by SEM and DSC respectively. The biocompatibility is determined by water soluble tetrazolium salt reagents (WST‐1) assay, which shows the new polymer networks had good biocompatibility. Through in vitro release of paclitaxel (PTX) and doxorubicin (DOX), the APCNs is confirmed to be promising drug depot materials for sustained hydrophobic and hydrophilic drugs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 407–417     

Volumetric and compressibility studies for (L-arginine + D-maltose monohydrate + water) system in the temperature range of (298.15 to 308.15) K

The density and speed of sound of L-arginine (0.025–0.2 mol kg^?1) in aqueous + D-maltose (0–6 mass% of maltose in water) were obtained at temperatures of (298.15, 303.15 and 308.15) K. The apparent molar volume, limiting apparent molar volume, transfer volume, as well as apparent molar compressibility, limiting apparent molar compressibility, transfer compressibility, pair and triple interaction coefficients, partial molar expansibilities, coefficient of thermal expansion and also the hydration number, were calculated using the experimental density and speed of sound values. The results have been discussed in terms of solute–solute and solute–solvent interactions in these systems. Solute–solvent (hydrophilic–ionic group and hydrophilic–hydrophilic group) interactions were found to be dominating over solute–solute (hydrophobic–hydrophilic group) interactions in the solution, which increases with increase in maltose concentration.     

Effect of Alkyl Chain Length of Bonded Silica Phases on Separation,Resolution and Efficiency in High Performance Liquid Chromatography

Abstract

A comparative study of alkyl bonded phases was carried out under optimum solvent conditions for each phase. Three columns, RP-2, RP-8 and RP-18, were tested for their efficiency and resolving power using three groups of compounds in three binary organic-water mobile phases. The organic solvents were acetonitrile, methanol and tetrahydrofuran which are widely used as solvent modifiers.

The results indicate that each of the three factors, i.e. solvent, solute and bonded alkyl chain length, play an important role, with the solvent being the most significant. When tetrahydrofuran-water was used as the mobile phase, the ratio of THF/H₂O did not vary by much when an RP-2, RP-8 or RP-18 column was used to separate naphthalene from biphenyl, dimethylphthalate from diethylphthalate or anthraquinone from methyl, anthraquinone and ethyl anthraquinone. When acetonitrile-water and methanol-water were used the ratio of organic modefier to water changed so as to accomodate the hydrophobic properties of the columns. The efficiency of the columns, expressed as theoretical plates per meter (TPM) was highest when acetonitrile-water was used as the mobile phase. Although there were variations in TPM and resolution from column to column, the three columns gave good separation of the components of the three groups of compounds.     

Studies on the retention behaviour of some thiazolylazo derivatives in reversed phase liquid chromatography

The retention behaviour of thiazolylazo derivatives, 4-(2-thiazolylazo) resorcinol (TAR), 4-(2-thiazolylazo)-orcinol (TAO), 2-(2-thiazolylazo)-4-methylphenol (TAC) and 1-(2-thiazolylazo)-2-naphtol (TAN) was studied by reversed phase liquid chromatography. The optimum conditions for the separation of four thiazolylazo derivatives were examined with respect to column, flow rate, mobile phase composition and pH of mobile phase. These derivatives were separated simultaneously on Symmetry C₈ column using composition of acetonitrile/water (60/40, v/v) as mobile phase. The capacity factor (k′) has been decreased at higher pH than pK_a of solute which may due to the increasing concentration of the ionized species as increase the pH of mobile phase. The dependence of log k′ on the volume faction of water in the binary mobile phase and k′ on the liquid–liquid extraction distribution ratio (D_c) in acetonitrile–water (60/40, v/v)/n-octane extraction system for thiazolylazo derivatives were obtained good linear relationship. The results showed that the retention behaviour of these derivatives was mainly affected by the hydrophobic interaction between thiazolylazo as solute and mobile phase.     

Selectivity in a liquid-solid chromatographic system

Summary Utilizing experimentally determined capacity ratios and “a priori” calculated activity coefficients of the solutes the selectivity of separation in a liquid-solid chromatographic system is studied. Both the experimentally determined selectivity factor (α) and the calculated selectivity factor in the mobile phase (α ^m) of a solute pair fit a quadratic function of the concentration of eluting solvent components. Comparing these factors it is shown that the selectivity in the stationary phase (α ^s) is fairly constant when the composition of the mobile phase is changed.     

<!?tlsb=‐0.06pt>Zigzag polymer chains in catena‐poly[[[triaqua(isobutyrato‐κO)magnesium(II)]‐μ‐isobutyrato‐κ2O:O′] monohydrate]

The structure of the title compound, {[Mg(C₄H₇O₂)₂(H₂O)₃]·H₂O}_n, features one‐dimensional ...(μ₂‐ib)Mg(μ₂‐ib)Mg... zigzag chains (ib is isobutyrate) parallel to the c axis. The octahedral Mg environment is completed by three fac‐oriented terminal water ligands, as well as one further monodentate end‐on coordinated ib ligand. In the crystal structure, the hydrophobic ib groups are all oriented within one half of the coordination perimeter of each chain, whereas the water ligands, together with hydrogen‐bonded noncoordinated solvent water molecules, define the other half. Along the a axis, neighbouring strands are oriented so that both the hydrophilic and hydrophobic sides are adjacent to each other. This results in an extensive hydrogen‐bonding network within the hydrophilic areas, also involving an additional solvent water molecule per formula unit. There are van der Waals contacts between the aliphatic isopropyl groups of the hydrophobic areas.     

Preparation,characterization and application of N-methylene phosphonic acid chitosan grafted magnesia–zirconia stationary phase

A hydrophilic stationary phase (SP) was prepared through grafting N-methylene phosphonic acid chitosan on magnesia–zirconia particles (P-CTS-MgO–ZrO₂) via Lewis acid–base interaction. The resulting material was characterized by thermogravimetric analysis, Fourier transform infrared spectroscopy, scanning electron microscope and nitrogen adsorption analysis. The chromatographic performance of P-CTS-MgO–ZrO₂ was systemically evaluated by studying effect of acetonitrile content, pH and buffer concentration in the mobile phase. The results demonstrated that the novel SP provided hydrophilic, electrostatic-repulsion and ion-exchange interactions. Compared to the bare MgO–ZrO₂, P-CTS-MgO–ZrO₂ exhibited superior peak shape, reasonable resolution and reduced analysis time in separation of basic analytes. Besides, remarkable resolving power of acids, i.e. six non-steroidal anti-inflammatory drugs which failed to be eluted from the bare MgO–ZrO₂, was obtained with the theoretical plate number (N/m) of 4653–31313, asymmetry factor <1.21 and the resolution of 1.6–3.4. Finally, P-CTS-MgO–ZrO₂ SP was applied to separate monosaccharides, phospholipids and peptides. P-CTS-MgO–ZrO₂ was a promising hydrophilic SP for wide applications.     

Optical biochemical sensor for determining hydroperoxides in nonpolar organic liquids as archetype for sensors consisting of amphiphilic conetworks as immobilisation matrices

This paper reports the successful design of a prototype of an optical biochemical sensor for the determination of hydroperoxides in nonpolar organic liquids. The sensor consists of a matrix of an amphiphilic polymer conetwork (APCN), a novel class of very promising polymeric materials for easy preparation of biochemical sensor matrices. APCNs are characterised by nanoscopic phase separation between the hydrophilic and the hydrophobic phases. For medium ratios of conetwork composition, the domains of both phases are interconnected both on the surface of the conetworks and throughout the bulk. The APCNs have peculiar swelling properties—the hydrophilic phase swells in hydrophilic media and the hydrophobic phase swells in hydrophobic media. In both types of media dissolved reagents can diffuse from the solution into the swollen phase of the polymeric conetwork. This enables loading of the hydrophilic phase of the APCNs with enzymes and indicator reagents by simple impregnation. Hydrophobic analytes can diffuse into the polymeric conetwork via its hydrophobic phase and react with indicator reagents immobilised in the hydrophilic phase at the huge internal interface between the two opposite phases. To prepare the described hydroperoxide-sensitive biosensors, we used APCN films consisting of 58% (w/w) poly(2-hydroxyethyl acrylate) (PHEA) as hydrophilic chains and 42% (w/w) polydimethylsiloxane (PDMS) as hydrophobic linkers. Horseradish peroxidase (HRP) and diammonium 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) as indicator reagent were co-immobilised in this optically clear and transparent matrix. In this feasibility study the conditions investigated were principally those relevant to characterisation of the innovative matrix material and the disposable biosensor produced from it; the biosensor was not optimised. Sensitivity toward tert-butylhydroperoxide (tBuOOH) dissolved in n-heptane was acceptable, between approximately 1 and at least 50 mmol L⁻¹, even in the dry state. The response time was 1.7 to 5.0 min. No leaching of immobilised reagents was observed during a period of at least one hour. Pre-swelling the sensors with water increased the reaction rate and the total turnover number of the enzyme. In a dry atmosphere at 4 °C the sensors were found to be stable for at least two weeks.     

Synthesis of micron-sized poly(styrene-<Emphasis Type="Italic">co</Emphasis>-divinylbenzene) hollow particles from seeded emulsions by using swelling solvents

Hollow micron-sized poly(styrene-co-divinylbenzene) particles were produced in seeded emulsions in the presence of swelling solvents. The size and morphology of the resulting polymer particles can be altered by varying swelling solvent in seeded polymerization at elevated temperature. The effects of swelling agents, including hydrophobic solvents, hydrophilic solvents and solvent mixtures, on the microstructure of particles were investigated. The formation of hollow poly(styrene-co-divinylbenzene) particles depended significantly on a fast and effective phase separation between the cross-linked shell and the swollen core, that occurred only in the presence of an appropriate swelling solvent.     

Simultaneous separation of hydrophilic and hydrophobic compounds by using an online HILIC-RPLC system with two detectors

In the present study, we developed a novel online hydrophilic interaction chromatography (HILIC)-RPLC separation system for simultaneous separation of both hydrophilic and hydrophobic solutes in a complex sample with one injection. A HILIC Si column and a C18 column were hyphenated with an interface including two electronic 2-position valves, a solvent pump, and a solute transfer column. By using column-switching technique, the nonretained hydrophobic solutes were eluted out of the HILIC column and transferred into the C18 column to perform further separation. The hydrophilic solutes were separated on the HILIC column at the same time. One detector was equipped for each column to record the individual chromatograms. By separating a standard mixture and a traditional Chinese medicine (TCM) extract, the developed HILIC-RPLC system demonstrates its potential for "entire-components" separation of complex samples with improved peak capacity and throughput compared with the common single-column LC.     

Enthalpies of solvation of ethylene oxide oligomers CH3O(CH2CH2O)nCH3 (n = 1 to 4) in different H-bonding solvents: Methanol, chloroform, and water. Group contribution method as applied to the polar oligomers

The enthalpies of solution and solvation of ethylene oxide oligomers CH₃O(CH₂CH₂O)_nCH₃ (n = 1 to 4) in methanol and chloroform have been determined from calorimetric measurements at T = 298.15 K. The enthalpic coefficients of pairwise solute–solute interaction for methanol solutions have been calculated. The enthalpic characteristics of the oligomers in methanol, chloroform, water and tetrachloromethane have been compared. The hydrogen bonding of the oligomers with chloroform and water molecules is exhibited in the values of solvation enthalpy and coefficient of solute–solute interaction. This effect is not observed for methanol solvent. The thermochemical data evidence an existence of multi-centred hydrogen bonds in associates of polyethers with the solvent molecules. Enthalpies of hydrogen bonding of the oligomers with chloroform and water have been estimated. The additivity scheme has been developed to describe the enthalpies of solvation of ethylene oxide oligomers, unbranched monoethers and n-alkanes in chloroform, methanol, water, and tetrachloromethane. The correction parameters for contribution of repeated polar groups and correction term for methoxy-compounds have been introduced. The obtained group contributions permit to describe the enthalpies of solvation of unbranched monoethers and ethylene oxide oligomers in the solvents with standard deviation up to 0.6 kJ · mol⁻¹. The values of group contributions and corrections are strongly influenced by solvent properties.     

Cucurbit(6)uril immobilized on silica: A novel high‐performance liquid chromatographic stationary phase

In the present study, one of the new generation of host molecules, cucurbit(6)uril (CB(6)), was immobilized onto silica (CB(6)/SiO₂) by a sol–gel approach. CB(6)/SiO₂ was characterized by NMR spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and elemental analysis. It was used as a high‐performance liquid chromatographic stationary phase and its chromatographic performance was systematically investigated with different types of analytes as probes. The results revealed that the CB(6)/SiO₂ stationary phase exhibited weak hydrophobic and strong hydrophilic properties. Hence, the variables for hydrophilic interaction liquid chromatography, including components and pH of the mobile phase, were further investigated to explore the retention mechanism of this CB(6)/SiO₂ stationary phase. For less polar analytes, both hydrophobic and hydrophilic interactions could contribute to the retention, while for polar analytes, hydrophilic interaction may be predominant. Compared to the tetraethoxylsilane‐coated SiO₂ stationary phases, the CB(6)/SiO₂ stationary phase exhibited a different retention behavior toward basic analytes with excellent stability. It is a novel promising hydrophilic interaction liquid chromatography stationary phase.     

Self-assembly mechanism of PEG-b-PCL and PEG-b-PBO-b-PCL amphiphilic copolymer micelles in aqueous solution from coarse grain modeling

We followed the self-assembly of high-molecular weight MePEG- b -PCL (poly(methyl ethylene glycol)-block-poly(ε-caprolactone)) diblock and MePEG- b -PBO- b -PCL (poly(methyl ethylene glycol)-block-poly(1,2-butylene oxide)-block-poly(ε-caprolactone)) into micelles using molecular dynamics simulation with a coarse grain (CG) force field based on quantum mechanics (CGq FF). The triblock polymer included a short poly(1,2-butylene oxide) (PBO) at the hydrophilic-hydrophobic interface of these systems. Keeping the hydrophilic length fixed (MePEG₄₅), we considered 250 chains in which the hydrophobic length changed from PCL₄₄ or PBO₆- b -PCL₄₃ to PCL₆₂ or PBO₉- b -PCL₆₁. The polymers were solvated in explicit water for 2 μs of simulations at 310.15 K. We found that the longer diblock system undergoes a morphological transition from an intermediate rod-like micelle to a prolate-sphere, while the micelle formed from the longer triblock system is a stable rod-like micelle. The two shorter diblock and triblock systems show similar self-assembly processes, both resulting in slightly prolate-spheres. The dynamics of the self-assembly is quantified in terms of chain radius of gyration, shape anisotropy, and hydration of the micelle cores. The final micelle structures are analyzed in terms of the local density components. We conclude that the CG model accurately describes the molecular mechanisms of self-assembly and the equilibrium micellar structures of hydrophilic and hydrophobic chains, including the quantity of solvent trapped inside the micellar core.     

Temperature dependence of swelling of crosslinked poly(N,N′-alkyl substituted acrylamides) in water

The swelling of crosslinked poiy(N,N′-alkyl substituted acrylamides) in water was studied in relation to temperature changes. Conventional swelling theory and separation of the polymer solvent interaction parameter into enthalpic and entropic contributions were used to characterize the temperature dependence of swelling in water. The thermosensitivity of swelling can be attributed to the delicate hydrophilic/hydrophobic balance of polymer chains and is affected by the size, configuration, and mobility of alkyl side groups. A sharp swelling transition may occur at an optimum hydrophilic/hydrophobic balance but was found only in the N-isopropylacrylamide network among the networks tested. This swelling transition pattern was also reflected by the endothermic peak of the DSC thermogram of the swollen sample.     

Stabilization of O/W emulsion with hydrophilic/hydrophobic clay particles

In this study, a stabilizing behavior of clay in a 40/60 w/w oil-in-water (O/W) emulsion is investigated by macro- and microscopic morphological observations, rheology, and X-ray diffraction measurements. Hydrophilic and hydrophobic clays (Montmorillonites) are tested for stabilization of emulsion. When hydrophilic clay showing interfacial localization is added to the emulsion, emulsion is not stable to phase separation (creaming). With hydrophobic clay, the emulsion shows phase inversion to water-in-oil (W/O) emulsion due to the increase in oil viscosity which results in phase separation of sedimentation. On the other hand, with the mixture of hydrophilic and hydrophobic clays, the emulsion shows a synergistic macroscopic and microscopic stabilization due to the formation of composite structure at the interface by hydrophilic and hydrophobic clays.