Finite element analysis of Volterra dislocations in anisotropic crystals: A thermal analogue

The present work gives a systematic and rigorous implementation of Volterra dislocations in ordinary two-dimensional finite elements using the thermal analogue and the integral representation of dislocations through the stresses. The full fields are given for edge dislocations in anisotropic crystals, and the Peach–Koehler forces are found for some important examples.     

A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites

We present a multiscale model for anisotropic, elasto-plastic, rate- and temperature-sensitive deformation of polycrystalline aggregates to large plastic strains. The model accounts for a dislocation-based hardening law for multiple slip modes and links a single-crystal to a polycrystalline response using a crystal plasticity finite element based homogenization. It is capable of predicting local stress and strain fields based on evolving microstructure including the explicit evolution of dislocation density and crystallographic grain reorientation. We apply the model to simulate monotonic mechanical response of a hexagonal close-packed metal, zirconium (Zr), and a body-centered cubic metal, niobium (Nb), and study the texture evolution and deformation mechanisms in a two-phase Zr/Nb layered composite under severe plastic deformation. The model predicts well the texture in both co-deforming phases to very large plastic strains. In addition, it offers insights into the active slip systems underlying texture evolution, indicating that the observed textures develop by a combination of prismatic, pyramidal, and anomalous basal slip in Zr and primarily {110}〈111〉 slip and secondly {112}〈111〉 slip in Nb.     

Size effects under homogeneous deformation of single crystals: A discrete dislocation analysis

Mechanism-based discrete dislocation plasticity is used to investigate the effect of size on micron scale crystal plasticity under conditions of macroscopically homogeneous deformation. Long-range interactions among dislocations are naturally incorporated through elasticity. Constitutive rules are used which account for key short-range dislocation interactions. These include junction formation and dynamic source and obstacle creation. Two-dimensional calculations are carried out which can handle high dislocation densities and large strains up to 0.1. The focus is laid on the effect of dimensional constraints on plastic flow and hardening processes. Specimen dimensions ranging from hundreds of nanometers to tens of microns are considered. Our findings show a strong size-dependence of flow strength and work-hardening rate at the micron scale. Taylor-like hardening is shown to be insufficient as a rationale for the flow stress scaling with specimen dimensions. The predicted size effect is associated with the emergence, at sufficient resolution, of a signed dislocation density. Heuristic correlations between macroscopic flow stress and macroscopic measures of dislocation density are sought. Most accurate among those is a correlation based on two state variables: the total dislocation density and an effective, scale-dependent measure of signed density.     

Modeling the evolution of crystallographic dislocation density in crystal plasticity

Dislocations are the most important material defects in crystal plasticity, and although dislocation mechanics has long been understood as the underlying physical basis for continuum crystal plasticity formulations, explicit consideration of crystallographic dislocation mechanics has been largely absent in working constitutive models. Here, dislocation density state variables evolve from initial conditions according to equations based on fundamental concepts in dislocation mechanics such as the conservation of Burgers vector in multiplication and annihilation processes. The model is implemented to investigate the polyslip behavior of single-crystal aluminum. The results not only capture the mechanical stress/strain response, but also detail the development of underlying dislocation structure responsible for the plastic behavior.     

A simple framework for full-network hyperelasticity and anisotropic damage

A formulation of a constitutive behaviour law is proposed for hyperelastic materials, such that damage induced anisotropy can be accounted for continuously. The full-network approach with directional damage is adopted as a starting point. The full-network law with elementary strain energy density based on the inverse Langevin is chosen as a reference law which is cast into the proposed framework. This continuum formalism is then rewritten using spherical harmonics to capture damage directionality. The proposed formalism allows for an efficient (and systematic) expansion of complex non-linear anisotropic constitutive laws. A low order truncated expression of the resulting behaviour is shown to reproduce accurately the stress-strain curves of the exact behaviour laws.     

A micromechanical model of hardening, rate sensitivity and thermal softening in BCC single crystals

The present paper is concerned with the development of a micromechanical model of the hardening, rate-sensitivity and thermal softening of bcc crystals. In formulating the model, we specifically consider the following unit processes: double-kink formation and thermally activated motion of kinks; the close-range interactions between primary and forest dislocations, leading to the formation of jogs; the percolation motion of dislocations through a random array of forest dislocations introducing short-range obstacles of different strengths; dislocation multiplication due to breeding by double cross-slip; and dislocation pair annihilation. The model is found to capture salient features of the behavior of Ta crystals such as: the dependence of the initial yield point on temperature and strain rate; the presence of a marked stage I of easy glide, specially at low temperatures and high strain rates; the sharp onset of stage II hardening and its tendency to shift towards lower strains, and eventually disappear, as the temperature increases or the strain rate decreases; the parabolic stage II hardening at low strain rates or high temperatures; the stage II softening at high strain rates or low temperatures; the trend towards saturation at high strains; the temperature and strain-rate dependence of the saturation stress; and the orientation dependence of the hardening rate.     

Heterogeneous deformation in ductile FCC single crystals in biaxial stretching: the influence of slip system interactions

The heterogeneity of deformation in ductile FCC single crystals is investigated by both numerical simulations and an analytic approach. The constitutive behaviour is based on a generalized storage recovery model and takes into account the interactions between slip systems previously obtained by dislocation dynamics simulations. In biaxial stretching, the simulations show the activation of a large number of slip systems and their localization in mutually excluding zones. As a result, a microstructure of lamellar type is formed in the early stages of the deformation. These numerical results are complemented by a linear stability analysis showing that the heterogeneous deformation pattern is triggered by instability modes of the single crystal. Furthermore, the interaction matrix is playing a key role as the partition is found to originate from slip system interactions. The partition is driven by the strongest interaction, which is in most cases the collinear interaction. A comparison with an experimental study in simple shear yields useful information about how to check the respective strength of some interactions. The collinear interaction is not involved in that case, but its effect can be verified by reproducing the experiment on a crystal with a different orientation.     

An approach to constitutive modelling of elasto-plasticity via ensemble averaging of the dislocation transport

Using an averaging procedure for large ensembles of dislocations, a basic but mathematically non-trivial modelling framework is developed for the transport of dislocation densities in a macroscopically homogeneous and isotropic film of a crystalline solid subjected to uniform shear. It has the form of a system of nonlinear, non-local partial differential equations of the first order with a source-type right-hand side. The solution to this system is studied numerically, and the associated average stress is evaluated as a function of time. The resulting stress-strain relations exhibit a size effect similar to those that previously motivated strain-gradient plasticity theories.     

Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheets: Application to sheet springback

The constitutive model for the unusual asymmetric hardening behavior of magnesium alloy sheet presented in a companion paper (Lee, M.G., Wagoner, R.H., Lee, J.K., Chung, K., Kim, H.Y., 2008. Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheet, Int. J. Plasticity 24(4), 545–582) was applied to the springback prediction in sheet metal forming. The implicit finite element program ABAQUS was utilized to implement the developed constitutive equations via user material subroutine. For the verification purpose, the springback of AZ31B magnesium alloy sheet was measured using the unconstrained cylindrical bending test of Numisheet (Numisheet ’2002 Benchmark Problem, 2002. In: Yang, D.Y., Oh, S.I., Huh, H., Kim, Y.H. (Eds.), Proceedings of 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes, Jeju, Korea) and 2D draw bend test. With the specially designed draw bend test the direct restraining force and long drawn distance were attainable, thus the measurement of the springback could be made with improved accuracy comparable with conventional U channel draw bend test. Besides the developed constitutive models, other models based on isotropic constitutive equations and the Chaboche type kinematic hardening model were also considered. Comparisons were made between simulated results by the finite element analysis and corresponding experiments and the newly proposed model showed enhanced prediction capability, which was also supported by the simple bending analysis adopting asymmetric stress–strain response.     

Model identification and FE simulations: Effect of different yield loci and hardening laws in sheet forming

The bi-axial experimental equipment [Flores, P., Rondia, E., Habraken, A.M., 2005a. Development of an experimental equipment for the identification of constitutive laws (Special Issue). International Journal of Forming Processes] developed by Flores enables to perform Bauschinger shear tests and successive or simultaneous simple shear tests and plane strain tests. Flores investigates the material behavior with the help of classical tensile tests and the ones performed in his bi-axial machine in order to identify the yield locus and the hardening model. With tests performed on one steel grade, the methods applied to identify classical yield surfaces such as [Hill, R., 1948. A theory of the yielding and plastic flow of anisotropic materials. Proceedings of the Royal Society of London A 193, 281–297; Hosford, W.F., 1979. On yield loci of anisotropic cubic metals. In: Proceedings of the 7th North American Metalworking Conf. (NMRC), SME, Dearborn, MI, pp. 191–197] ones as well as isotropic Swift type hardening, kinematic Armstrong–Frederick or Teodosiu and Hu hardening models are explained. Comparison with the Taylor–Bishop–Hill yield locus is also provided. The effect of both yield locus and hardening model choices is presented for two applications: plane strain tensile test and Single Point Incremental Forming (SPIF).     

Material model describing the orientation dependent creep behavior of single crystals based on dislocation densities of slip systems

A material model is proposed which describes single crystal creep behavior by evolution equations for dislocation densities on individual slip systems. An interaction matrix determines the influence from one glide system to the other. Assuming a face centered cubic crystal, allowing deformation on octahedral glide planes and cube glide planes with a Burgers vector of the type a/2〈110〉, nine independent parameters of the interaction matrix can be distinguished. A parameter check of the nine independent parameters has been carried out, showing the influence of parameters on specific orientations of the load axis. If one assumes dislocation interaction of a glide system only with itself a smooth behavior is predicted with a maximum creep rate for [001] orientation, followed by [011] and [111]. If a strong interaction is assumed, the orientation dependent creep behavior is not at all smooth, instead it shows a sharp drop in creep rates mainly in symmetric positions of the standard orientation triangle. The orientations with highest creep rates are in this case those which favor single glide. Highly symmetric orientations, such as [001], [011] and [111] have strongly decreased stationary creep rates.     

A simple nonlinear model to simulate the localized necking and neck propagation

This paper deals with the equilibrium problem in nonlinear dissipative inelasticity of damaged bodies subject to uniaxial loading and its main purpose is to show the interesting potentialities offered by the damage theory in modeling the necking and neck propagation phenomena in polymeric materials. In detail, the proposed mechanical model is a two-phase system, with the same constitutive law but with different levels of damage for each phase. Despite its simplicity, it is shown that the model can straightforwardly reproduce the overall load–elongation curve provided by experimental tensile tests by involving only five parameters of clear physical meaning.     

Characterization of yielding behavior of polycrystalline metals with single crystal plasticity based on representative characteristic length

Single crystal plasticity based on a representative characteristic length is proposed and introduced into a homogenization approach based on finite element analyses, which are applied to characterization of distinctive yielding behaviors of polycrystalline metals, yield-point elongation, and grain size strengthening. The computational manner for an implicit stress update is derived with the framework of a standard multi-surface plasticity at finite strain, where the evolution of the characteristic lengths are numerically converted from the accumulated slips of all of slip systems by exploiting the mathematical feature of the characteristic length as the intermediate function of the plastic internal variables. Furthermore, a constitutive model for a single crystal reproduces the stress–strain curve divided into three parts. Using two-scale finite element analysis, the macroscopic stress–strain response with yield-point elongation under a situation of low dislocation density is reproduced. Finally, the grain size effect on the yield strength is analyzed with modeling of the grain boundary in the context of the proposed constitutive model and is discussed from both macroscopic and microscopic views.     

A non-associated constitutive model with mixed iso-kinematic hardening for finite element simulation of sheet metal forming

In this paper an anisotropic material model based on non-associated flow rule and mixed isotropic–kinematic hardening was developed and implemented into a user-defined material (UMAT) subroutine for the commercial finite element code ABAQUS. Both yield function and plastic potential were defined in the form of Hill’s [Hill, R., 1948. A theory of the yielding and plastic flow of anisotropic metals. Proc. R. Soc. Lond. A 193, 281–297] quadratic anisotropic function, where the coefficients for the yield function were determined from the yield stresses in different material orientations, and those of the plastic potential were determined from the r-values in different directions. Isotropic hardening follows a nonlinear behavior, generally in the power law form for most grades of steel and the exponential law form for aluminum alloys. Also, a kinematic hardening law was implemented to account for cyclic loading effects. The evolution of the backstress tensor was modeled based on the nonlinear kinematic hardening theory (Armstrong–Frederick formulation). Computational plasticity equations were then formulated by using a return-mapping algorithm to integrate the stress over each time increment. Either explicit or implicit time integration schemes can be used for this model. Finally, the implemented material model was utilized to simulate two sheet metal forming processes: the cup drawing of AA2090-T3, and the springback of the channel drawing of two sheet materials (DP600 and AA6022-T43). Experimental cyclic shear tests were carried out in order to determine the cyclic stress–strain behavior and the Bauschinger ratio. The in-plane anisotropy (r-value and yield stress directionalities) of these sheet materials was also compared with the results of numerical simulations using the non-associated model. These results showed that this non-associated, mixed hardening model significantly improves the prediction of earing in the cup drawing process and the prediction of springback in the sidewall of drawn channel sections, even when a simple quadratic constitutive model is used.     

Experimental investigation and modeling of non-monotonic creep behavior in polymers

The deformation behavior of two unfilled engineering thermoplastics, ultra high molecular weight polyethylene (UHMWPE) and polycarbonate (PC), has been investigated in creep test conditions. It has been found that a loading history (prior to the creep test) comprising of loading to a maximum stress or strain value followed by partial unloading to arrive at the target stress value can greatly modify the strain-time behavior. Under such a test protocol, while the expected increase in strain during creep (constant tensile load) is observed, at relatively low creep stresses specimens have also demonstrated a monotonic decrease in strain. In an intermediate stress range, specimens have demonstrated time dependent behavior comprising of a transition from decreasing to increasing strain during creep in tension. This paper presents experimental results to delineate these findings and explore the effect of prior strain rate on the qualitative and quantitative changes in the output (strain-time) behavior. Furthermore, modification of the viscoplasticity theory based on overstress (VBO) model into a double element configuration is introduced. These changes confer upon the model the ability to yield non-monotonic behavior in creep, and supporting simulation results have been included. These changes, therefore, allow the model to simulate strain rate sensitivity, creep, relaxation, and recovery behavior, but more importantly address the issue of non-monotonic changes in creep and relaxation when a loading history involves some degree of unloading.     

A finite element formulation based on non-associated plasticity for sheet metal forming

In the present paper, a finite element formulation based on non-associated plasticity is developed. In the constitutive formulation, isotropic hardening is assumed and an evolution equation for the hardening parameter consistent with the principle of plastic work equivalence is introduced. The yield function and plastic potential function are considered as two different functions with functional form as the yield function of Hill [Hill, R., 1948. Theory of yielding and plastic flow of anisotropic metals. Proc. Roy. Soc. A 193, 281–297] or Karafillis–Boyce associated model [Karafillis, A.P. Boyce, M., 1993. A general anisotropic yield criterion using bounds and a transformation weighting tensor. J. Mech. Phys. Solids 41, 1859–1886]. Algorithmic formulations of constitutive models that utilize associated or non-associated flow rule coupled with Hill or Karafillis–Boyce stress functions are derived by application of implicit return mapping procedure. Capabilities in predicting planar anisotropy of the Hill and Karafillis–Boyce stress functions are investigated considering material data of Al2008-T4 and Al2090-T3 sheet samples. The accuracy of the derived stress integration procedures is investigated by calculating iso-error maps.     

Dislocation-based micropolar single crystal plasticity: Comparison of multi- and single criterion theories

Two new formulations of micropolar single crystal plasticity are presented within a geometrically linear setting. The construction of yield criteria and flow rules for generalized continuum theories with higher-order stresses can be done in one of two ways: (i) a single criterion can be introduced in terms of a combined equivalent stress and inelastic rate or (ii) or individual criteria can be specified for each conjugate stress/inelastic kinematic rate pair, a so-called multi-criterion theory. Both single and multi-criterion theories are developed and discussed within the context of dislocation-based constitutive models. Parallels and distinctions are made between the proposed theories and some of the alternative generalized crystal plasticity models that can be found in the literature. Parametric numerical simulations of a constrained thin film subjected to simple shear are conducted via finite element analysis using a simplified 2-D version of the fully 3-D theory to highlight the influence of specific model components on the resulting deformation under both loading and unloading conditions. The deformation behavior is quantified in terms of the average stress-strain response and the local shear strain and geometrically necessary dislocation density distributions. It is demonstrated that micropolar single crystal plasticity can qualitatively capture the same range of behaviors as slip gradient-based models, while offering a simpler numerical implementation and without introducing plastic slip rates as generalized traction-conjugate velocities subject to an additional microforce balance.