SrTiO3/BiOI异质结构:界面电荷分离、增强光催化活性和反应机理（英文）

异质结构光催化剂为实现高效的电荷分离,提高光催化性能提供了一种有效的途径.虽然宽禁带和窄禁带光催化剂已经得到了广泛的研究,但它们在接触界面上的电荷分离和转移规律尚未完全揭示.本文采用简便的方法成功地制备了一种新型SrTiO3/BiOI(STB)异质结构光催化剂.该光催化剂中的异质结构可以将光吸收扩展到可见光范围,从而在可见光照射下获得较高的光催化NO去除性能.实验和理论证据表明,BiOI光生电子可以通过预成型的电子传递通道直接转移到SrTiO3表面.XRD和XPS结果表明,SrTO3/BiOI复合材料已成功制备.SEM和TEM图像显示了SrTiO3,BiOI和STB样品的形貌.能量色散X射线(EDX)元素图清楚地表明SrTiO3均匀分布在BiOI纳米片表面,证实BiOI与SrTiO3形成了界面.高分辨率XPS表明,电子从BiOI中Bi和I原子转移到STB化合物中SrTO3的Sr和Ti原子.采用DFT进一步确定了BiOI与SrTiO3相互作用的机制.电子局域函数(ELF)表明,STB的接触界面存在共价相互作用.SrTiO3和BiOI之间生成的共价键导致局域化超额电子(e-ex)的积累.在可见光照射下,界面内的电子交换增强,从而提高反应物活化和ROS生成的效率.采用自制的连续流反应体系,研究了在可见光照射下制备的样品对NO去除的光催化性能.与SrTiO3和BiOI相比,STB具有显著增强的可见光光催化活性,去除率为59.0%.UV-vis DRS显示,STB异质结的光吸收扩展到可见光范围.SrTiO3具有可见光活性,这归因于EPR所描述的氧空位的存在.随后计算态密度(DOS),发现氧空位可以形成缺陷能级,降低激发电子所需的光能.利用ESR光谱发现,STB上的ESR信号强度都要强得多,说明STB异质结具有较好的氧化能力,也说明光生载流子可以通过电子传递通道被有效地分离.原位红外光谱表明,在SrTiO3上,NO主要转化为NO2.STB的加速电荷分离和转移特性,促进活性氧的生成,从而进一步有效地将有毒中间体NO2转化为目标产物.设计并制备的SrTiO3/BiOI异质结光催化剂在可见光辐照下净化空气中NO的效率提高,同时抑制了有毒中间体的生成.通过实验和理论相结合的方法揭示了在两种材料的接触界面上建立的电子传递通道.来自BiOI的光生电子可以通过预先形成的电子传递通道直接转移到SrTiO3表面,从而促进了ROS的生成,所以整体的NO纯化效率和对有毒中间体的抑制作用提高.综上,本文提出了一种简单、新颖的促进空气污染物高效安全净化的策略.     

花球状Bi2S3/BiOI复合光催化剂在空气中净化甲醛的应用

以硫代乙酰胺为硫源,采用水热阴离子转移法,制备由纳米片组装的花球状Bi₂S₃/BiOI复合光催化剂。以气相甲醛作为模型污染物,在检测舱中考察了复合催化剂对甲醛的净化作用。结果表明,具有异质结结构的Bi₂S₃/BiOI复合光催化剂具有较高的光催化活性,能在可见光下净化空气中的甲醛,并且具有良好的循环使用稳定性。     

花球状Bi2S3/BiOI复合光催化剂去除空气中甲醛的应用

以硫代乙酰胺为硫源,采用水热阴离子转移法,制备由纳米片组装的花球状Bi₂S₃/BiOI复合光催化剂。以气相甲醛作为模型污染物,在检测舱中考察了复合催化剂对甲醛的去除作用。结果表明,具有异质结结构的Bi₂S₃/BiOI复合光催化剂具有较高的光催化活性,能在可见光下去除空气中的甲醛,并且具有良好的循环使用稳定性。     

Enhanced Photoelectrocatalytic Activity of BiOI Nanoplate–Zinc Oxide Nanorod p–n Heterojunction

The development of highly efficient and robust photocatalysts has attracted great attention for solving the global energy crisis and environmental problems. Herein, we describe the synthesis of a p–n heterostructured photocatalyst, consisting of ZnO nanorod arrays (NRAs) decorated with BiOI nanoplates (NPs), by a facile solvothermal method. The product thus obtained shows high photoelectrochemical water splitting performance and enhanced photoelectrocatalytic activity for pollutant degradation under visible light irradiation. The p‐type BiOI NPs, with a narrow band gap, not only act as a sensitizer to absorb visible light and promote electron transfer to the n‐type ZnO NRAs, but also increase the contact area with organic pollutants. Meanwhile, ZnO NRAs provide a fast electron‐transfer channel, thus resulting in efficient separation of photoinduced electron–hole pairs. Such a p–n heterojunction nanocomposite could serve as a novel and promising catalyst in energy and environmental applications.     

A Bi/BiOI/(BiO)2CO3 heterostructure for enhanced photocatalytic NO removal under visible light

Narrow-band BiOI photocatalysts usually suffer from low photocatalysis efficiency under visible light exposure because of rapid charge recombination. In this work, to overcome this deficiency of photosensitive BiOI, oxygen vacancies, Bi particles, and Bi₂O₂CO₃ were co-induced in BiOI via a facile in situ assembly method at room temperature using NaBH₄ as the reducing agent. In the synthesized ternary Bi/BiOI/(BiO)₂CO₃, the oxygen vacancies, dual heterojunctions (i.e., Bi/BiOI and BiOI/(BiO)₂CO₃), and surface plasmon resonance effect of the Bi particles contributed to efficient electron-hole separation and an increase in charge carrier concentration, thus boosting the overall visible light photocatalysis efficiency. The as-prepared catalysts were applied for the removal of NO in concentrations of parts per billion from air in continuous air flow under visible light illumination. Bi/BiOI/(BiO)₂CO₃ exhibited a highly enhanced NO removal ratio of 50.7%, much higher than that of the pristine BiOI (1.2%). Density functional theory calculations and experimental results revealed that the Bi/BiOI/(BiO)₂CO₃ composites promoted the production of reactive oxygen species for photocatalytic NO oxidation. Thus, this work provides a new strategy to modify narrow-band semiconductors and explore other bismuth-containing heterostructured visible-light-driven photocatalysts.     

Achieving UV and visible-light photocatalytic activity enhancement of AgI/BiOIO3 heterostructure:Decomposition for diverse industrial contaminants and high mineralization ability

Heterostructure photocatalyst fabrication is of great significance for promoting the photoreactivity and solar-energy utilization efficiencies. In this work, AgI/BiOIO_3 heterostructure photocatalysts are synthesized by a facile in-situ crystallization of AgI on BiOIO_3. The photocatalytic performance is first surveyed by decomposition of model dye methyl orange(MO) separately with illumination of UV light and visible-light(λ 420 nm). It indicates that AgI/BiOIO_3 shows highly improved photocatalytic activity regardless of the light source, which should be attributed to the matchable band energy levels between AgI and BiOIO_3, benefiting the efficient charge separation. Notably, AgI/BiOIO_3 shows a universal photocatalytic activity for treating diverse antibiotics and phenols, including tetracycline hydrochloride,chlortetracycline hydrochloride, 2,4-dichlorophenol(2,4-DCP), phenol and bisphenol A(BPA), and the strong mineralization ability of AgI/BiOIO_3 was also demonstrated. Additionally, the different mechanisms under UV and visible light irradiation are investigated in detail. This work provides a new reference for design and manipulation of high-performance nonselective heterostructure photocatalyst for environmental purification.     

Fabrication of PET/BiOI/SnO2 heterostructure nanocomposites for enhanced visible-light photocatalytic activity

Heterojunction BiOI/SnO₂ nanocomposites have been facilely synthesized by using successive ionic layer adsorption and reaction (SILAR) and a hydrothermal method, and polyethylene terephthalate (PET) nanofibers (NFs) were utilized as a photocatalyst carrier to support the BiOI/SnO₂ nanocomposites. PET/BiOI/SnO₂ NFs displayed excellent photocatalytic ability towards methyl orange (MO) and tetracycline (TC) under visible light irradiation. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) were employed to investigate the morphology, crystal structure and chemical state of the PET/BiOI/SnO₂ nanofibers. Photoluminescence (PL) and active species trapping experiments indicated that photoinduced charge separation promoted the formation of holes (h⁺) and superoxide radicals (•O²_-). Moreover, a photodegradation mechanism was proposed to illustrate that the formation of a Fermi level equilibrium state between semiconductors accelerated charge separation in the semiconductor. This study is meaningful for providing new inspiration to design and fabricate novel heterostructure photocatalysts with enhanced photocatalytic activity.     

BiOI/Bi2WO6对甲基橙和苯酚的光催化降解及光催化机理

采用简单的沉积方法制备了不同碘化氧铋含量的BiOI/Bi₂WO₆光催化剂,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电子显微镜(HR-TEM)、紫外-可见漫反射光谱(UV-VisDRS)和BET比表面积测量对其进行了表征。在紫外和可见光的照射下,使用甲基橙和苯酚的光催化降解评价了BiOI/Bi₂WO₆催化剂的光催化性能。结果表明：与商业P₂₅和纯Bi₂WO₆相比,13.2%BiOI/Bi₂WO₆光催化剂具有更高的紫外和可见光催化性能。这明显增加的光催化活性主要归功于光生电子和空穴在Bi₂WO₆和BiOI界面上的有效转移,降低了电子-空穴对的复合。基于BiOI和Bi₂WO₆的能带结构,提出了光生载流子的一种转移过程。自由基清除剂的实验表明,OH,h⁺,O₂和H₂O₂,特别是h⁺,共同支配了甲基橙和苯酚的光催化降解过程。     

Enhanced photodegradation of 2,4-dinitrophenol by n–p type TiO2/BiOI nanocomposite

Photocatalysis has recently been regarded as one of the most viable technologies for water treatment. Scholars all over the world are focusing on nanocomposites for water treatment for efficient and effective sanitization of bodies of water. Because of their high surface area, high chemical reactivity, excellent mechanical strength, low cost, and nanoscale composite materials have enormous potential to purify water in a various way. In this study, n-type TiO₂ was synthesized and tailored to produce a TiO₂/BiOI n–p nanocatalyst for enhanced photodegradation of 2,4-dinitrophenol (2,4-DNP) under UV-A and solar light respectively. Because of the formation of a heterojunction between BiOI and TiO₂, the photocatalytic activity in TiO₂/BiOI absorbs strongly in both the UV and visible regions and it has a lower recombination rate of the e^-/h⁺ pairs. Furthermore, the generation of OH^?, O₂^?– radicals during the oxidation process is attributed to the photodegradation of 2,4-DNP. The results revealed that the TiO₂/BiOI manifest outperformed BiOI and TiO₂ in terms of photocatalytic function. XRD, BET, HR-SEM-EDX with ECM, HR-TEM, FT-IR, PL, and UV-DRS techniques determined the photocatalyst composition. The HR-SEM images clearly showed that the particles are less than 27 ?nm in size. Thus, nanocomposite materials have played an important role in water purification.     

异质结型AgI/AgBr/TiO2催化剂的制备及其光催化性能

首先以沉积-沉淀法制备AgBr/TiO₂复合催化剂,然后采用离子交换法制备出新型的异质结型AgI/AgBr/TiO₂光催化剂.利用XRD和UV-Vis对AgI/AgBr/TiO₂光催化剂进行了表征.以甲基橙为染料模型,在可见光条件下(500 W、λ>420 nm)研究了AgI的含量对AgI/AgBr/TiO₂催化活性的影响.结果表明,AgI拓展了催化剂的吸收光谱范围;AgI生成量为AgBr的5%时,AgI/AgBr/TiO₂的催化活性最高.AgI/AgBr异质结的形成有利于光生电子和空穴的分离,提高AgI/AgBr/TiO₂的催化活性.     

石墨烯量子点修饰的BiOI/PAN柔性纤维的制备及其增强的光催化活性

In environment remediation, photocatalytic oxidation is a promising technique for removing organic pollutants. Compared to adsorption, biodegradation, and chemical oxidation, photocatalytic oxidation can eliminate organic pollutants completely, conveniently, and cheaply in an environmentally friendly manner. Visible-light-driven photocatalytic oxidation is particularly advisable because of the high proportion of visible light energy in solar energy. Bismuth oxyiodide (BiOI) is a promising visible-light-driven photocatalyst for the oxidization of pollutants, not only because of its narrow band gap, but also for its relatively low valence band (VB), which is adequate for photogenerated holes to oxidize a variety of organic compounds. However, the shortcomings of BiOI powder, such the difficulty of recycling it, its low surface area, and fast carrier recombination, limit its practical applications. Meanwhile, the flexibility and hierarchical structure of photocatalysts are particularly advisable because these properties are beneficial for the convenient operation, recycling, and performance improvement of these materials. Herein, based on an electro-spun polyacrylonitrile (PAN) nanofiber substrate, a hierarchical BiOI/PAN fiber was prepared through an in situ reaction. In the as-prepared BiOI/PAN fibers, BiOI flakes were aligned vertically and uniformly around the PAN fibers. BiOI nuclei generated from pre-introduced Bi(Ⅲ) in the PAN fiber act as seeds for the growth of BiOI nanoplates, which is crucial for the formation of a hierarchical structure. Such a hierarchical structure can improve both the light absorption and carrier generation of the BiOI/PAN fibers, as demonstrated by UV-Vis diffuse reflectance spectra and photoluminescence emission. Therefore, the BiOI/PAN fibers exhibited higher photocatalytic activity than BiOI powder. When the BiOI/PAN fibers were decorated with pre-prepared graphene quantum dots (GQDs), a GQD-modified BiOI/PAN fibrous composite (GQD-BiOI/PAN) was fabricated. The morphology of the obtained GQD-BiOI/PAN fibers was nearly the same as that of the BiOI/PAN fibers. A step-scheme (S-scheme) heterojunction was formed between the GQDs and BiOI, which was confirmed by the fabrication method, photoluminescence emission, reactive radical tests, and XPS analysis. This kind of S-scheme heterojunction can not only effectively suppress the recombination of photogenerated holes, but can also reserve the more reductive electrons on the lowest unoccupied molecular orbital of GQDs and the more oxidative holes on the VB of BiOI, for the photocatalytic degradation of phenol. Because of the fibrous hierarchical structure and S-scheme heterojunction, GQD-BiOI/PAN outperformed BiOI nanoparticles and BiOI/PAN nanofibers in the photocatalytic oxidation of phenol under visible light. In addition, because of tight bonding, GQD-BiOI/PAN can be tailored and operated by hand, which is convenient for recycling. During recycling, no obvious loss of sample or decrease in photocatalytic activity was observed. This work provides a new pathway for the fabrication of flexible photocatalysts and a new insight into the enhancement of photocatalysts.      

Room Temperature Synthesis and Photocatalytic Activity of Magnetically Recoverable Fe3O4/BiOCl Nanocomposite Photocatalysts

Magnetically recoverable Fe₃O₄/BiOCl nanocomposite photocatalysts were fabricated by a simple chemical coprecipitation method at room temperature. The amount of Fe₃O₄ incorporated into BiOCl was varied from 0 to 20 wt%. The as-synthesized samples were characterized by X-ray diffraction, transmission electron microscopy, energy dispersive spectroscopy, UV–Vis diffuse reflectance spectroscopy, and vibrating sample magnetometer. The obtained results show that the as-synthesized samples mainly contain both crystalline phases (Fe₃O₄ and BiOCl) and are composed of flower-like nanostructures. Compared to UV light-responsive BiOCl, all the nanocomposite photocatalysts show a strong light absorbance in the range of 250–800 nm, demonstrating that the Fe₃O₄/BiOCl nanocomposites can respond to visible as well as UV light. Moreover, visible light absorbance was increased with the increase in the Fe₃O₄ amount in the composite. The photocatalytic activity of nanocomposite photocatalysts was evaluated by the photodegradation of Rhodamine B (RhB) over the samples under visible light irradiation. The 10 wt% Fe₃O₄/BiOCl nanocomposite photocatalyst shows the highest photocatalytic efficiency among the samples. The Fe₃O₄/BiOCl nanocomposite photocatalyst was stable under visible light irradiation to efficiently degrade RhB molecules after five cycles and could be easily recovered with a magnet after each cycle.     

BiOI/Bi_2WO_6对甲基橙和苯酚的光催化降解及光催化机理(英文)

采用简单的沉积方法制备了不同碘化氧铋含量的BiOI/Bi2WO6光催化剂,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电子显微镜(HR-TEM)、紫外-可见漫反射光谱(UV-Vis DRS)和BET比表面积测量对其进行了表征。在紫外和可见光的照射下,使用甲基橙和苯酚的光催化降解评价了BiOI/Bi2WO6催化剂的光催化性能。结果表明:与商业P25和纯Bi2WO6相比,13.2%BiOI/Bi2WO6光催化剂具有更高的紫外和可见光催化性能。这明显增加的光催化活性主要归功于光生电子和空穴在Bi2WO6和BiOI界面上的有效转移,降低了电子-空穴对的复合。基于BiOI和Bi2WO6的能带结构,提出了光生载流子的一种转移过程。自由基清除剂的实验表明,·OH,h+,·O2-和H2O2,特别是h+,共同支配了甲基橙和苯酚的光催化降解过程。     

Combination of Ag2CrO4 and AgI semiconductors with g-C3N4: Novel nanocomposites with substantially improved photocatalytic performance under visible light

Novel g-C₃N₄/Ag₂CrO₄/AgI nanocomposites with improved photocatalytic performance under visible light were synthesized by consecutive deposition of Ag₂CrO₄ and AgI semiconductors over g-C₃N₄ sheets by refluxing method. The synthesized g-C₃N₄/Ag₂CrO₄/AgI photocatalysts were fully characterized by XRD, EDX, SEM, TEM, UV–vis DRS, TGA, FT-IR, and PL instruments. Photocatalytic performance of g-C₃N₄/Ag₂CrO₄/AgI (30%) nanocomposite for degradation of RhB was 27.9, 4.0, and 3.1 folds greater than those of the g-C₃N₄, g-C₃N₄/Ag₂CrO₄ (20%), and g-C₃N₄/AgI (30%) photocatalysts, respectively. The substantially increased photocatalytic performance was related to efficient retardation of the charge carriers from recombination and more absorbing of visible light, due to the synergistic effects of Ag₂CrO₄ and AgI on g-C₃N₄. The photocatalytic performance of the ternary nanocomposite did not considerably change after several cycles, indicating that the ternary nanocomposite is stable and it could be reused in successive runs.     

0D/1D AgI/MoO3 Z-scheme heterojunction photocatalyst: Highly efficient visible-light-driven photocatalyst for sulfamethoxazole degradation

Low dimension nano photocatalysts show great potential in the field of treating contaminated water for their large surface area and size effect. In this study, a 0D/1D AgI/MoO₃ Z-scheme photocatalyst with striking photocatalytic performance was constructed successfully. The one-dimensional MoO₃ nanobelts were prepared by a simple hydrothermal method, and then it was modified by AgI nanoparticles in a handy deposition approach. When choosing sulfamethoxazole (SMZ) as the target contaminant, the rate constant value of the optimal 0D/1D AgI/MoO₃ composite could hit up to 0.13 min⁻¹, which is nearly 22.4 times and 32.5 times as that of pure MoO₃ (0.0058 min⁻¹) and AgI (0.0040 min⁻¹), respectively. A series of detailed characterizations give evidences that the charge transfer in the composite followed Z scheme mechanism. Therefore, efficient separation/transfer and the remained high redox activity of photogenerated carriers played a vital role in the sharply enhanced photocatalytic properties. The possible degradation pathways of SMZ were proposed based on the intermediates detected by high-performance liquid chromatography-mass spectrometry (HPLC-MS). Meanwhile, the magnificent cyclic stability makes the material a promising material in the practical application.     

还原氧化石墨烯-硒化银纳米复合材料的水热合成与表征及其活性氧物种产生(英文)

A visible-light photocatalyst containing Ag2Se and reduced graphene oxide(RGO) was synthesized by a facile sonochemical-assisted hydrothermal method. X-ray diffraction, scanning electron mi-croscopy with energy-dispersive X-ray analysis, and ultraviolet-visible diffuse reflectance spectros-copy results indicated that the RGO-Ag2Se nanocomposite contained small crystalline Ag2Se nano-particles dispersed over graphene nanosheets and absorbed visible light. The high crystallinity of the nanoparticles increased photocatalytic activity by facilitating charge transport. N2 adsorp-tion-desorption measurements revealed that the RGO-Ag2Se nanocomposite contained numerous pores with an average diameter of 9 nm, which should allow reactant molecules to readily access the Ag2Se nanoparticles. The RGO-Ag2Se nanocomposite exhibited higher photocatalytic activity than bulk Ag2Se nanoparticles to degrade organic pollutant rhodamine B and industrial dye Texbrite BA-L under visible-light irradiation(λ 420 nm). The generation of reactive oxygen spe-cies in RGO-Ag2Se was evaluated through its ability to oxidize 1,5-diphenylcarbazide to 1,5-diphenylcarbazone. The small size of the Ag2Se nanoparticles in RGO-Ag2Se was related to the use of ultrasonication during their formation, revealing that this approach is attractive to form po-rous RGO-Ag2Se materials with high photocatalytic activity under visible light.     

Photodegradation of Rhodamine B on Sulfur Doped ZnO/TiO2 Nanocomposite Photocatalyst under Visible-light Irradiation

Sulfur doped ZnO/TiO₂ nanocomposite photocatalysts were synthesized by a facile sol‐gel method. The structure and properties of catalysts were characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), UV‐vis diffusive reflectance spectroscopy (DRS) and N₂ desorption‐adsorption isotherm. The XRD study showed that TiO₂ was anatase phase and there was no obvious difference in crystal composition of various S‐ZnO/TiO₂. The XPS study showed that the Zn element exists as ZnO and S atoms form SO^2?₄. The prepared samples had mesoporosity revealed by N₂ desorption‐adsorption isotherm result. The degradation of Rhodamine B dye under visible light irradiation was chosen as probe reaction to evaluate the photocatalytic activity of the ZnO/TiO₂ nanocomposite. The commercial TiO₂ photocatalyst (Degussa P25) was taken as standard photocatalyst to contrast the prepared different photocatalyst in current work. The improvement of the photocatalytic activity of S‐ZnO/TiO₂ composite photocatalyst can be attributed to the suitable energetic positions between ZnO and TiO₂, the acidity site caused by sulfur doping and the enlargement of the specific area. S‐3.0ZnO/TiO₂ exhibited the highest photocatalytic activity under visible light irradiation after Zn amount was optimized, which was 2.6 times higher than P25.     

Hydrothermal Synthesis of g‐C3N4/NiFe2O4 Nanocomposite and Its Enhanced Photocatalytic Activity

Herein, for the first time, a direct Z‐scheme g‐C₃N₄/NiFe₂O₄ nanocomposite photocatalyst was prepared using facile one‐pot hydrothermal method and characterized using XRD, FT‐IR, DRS, PL, SEM, EDS, TEM, HRTEM, XPS, BET and VSM characterized techniques. The result reveals that the NiFe₂O₄ nanoparticles are loaded on the g‐C₃N₄ sheets successfully. The photocatalytic activities of the as‐prepared photocatalysts were evaluated for the degradation of methyl orange (MO) under visible light irradiation. It was shown that the photocatalytic activity of the g‐C₃N₄/NiFe₂O₄ nanocomposite is about 4.4 and 3 times higher than those of the pristine NiFe₂O₄ and g‐C₃N₄ respectively. The enhanced photocatalytic activity could be ascribed to the formation of g‐C₃N₄/NiFe₂O₄ direct Z‐scheme photocatalyst, which results in efficient space separation of photogenerated charge carriers. More importantly, the as‐prepared Z‐scheme photocatalyst can be recoverable easily from the solution by an external magnetic field and it shows almost the same activity for three consecutive cycles. Considering the simplicity of preparation method, this work will provide new insights into the design of high‐performance magnetic Z‐scheme photocatalysts for organic contaminate removal.     

Enhanced Charge Separation of α-Bi2O3-BiOI Hollow Nanotube for Photodegradation Antibiotic Under Visible Light

It is highly desirable to exploit semiconductor materials with high photocatalytic degradation activity, especially bismuth oxyhalide semiconductor photocatalysts with special layered structure and suitable bandgap width. The low utilization rate of visible light and high recombination rate of photogenerated electron-hole of BiOI photocatalyst severely restrict its development. Herein, a heterojunction photocatalyst of α-Bi₂O₃-BiOI hollow nanotube was prepared by electrospinning method, solvothermal method and ion-exchange method. The α-Bi₂O₃-BiOI(BB-4, the stirring time of Bi₂O₃ in KI solution was 4 h) exhibited the best photocatalytic performance towards degrading the tetracycline hydrochloride(TC) solution, which could remove 85% of TC(10 mg/L) in 2 h under visible light irradiation. The estimated k_TC of α-Bi₂O₃-BiOI(BB-4) was ca. 3.9 and 1.8 times as much as that of α-Bi₂O₃ and pure BiOI, respectively. It indicated that the formation of α-Bi₂O₃-BiOI heterojunction can significantly improve the separation efficiency of photogenerated electron-hole pairs, therefore the photocatalytic ability was enhanced. Furthermore, a corresponding photocatalytic mechanism was proposed that ^·O₂^- radical and holes are the main active components in the photodegradation through trapping experiment.     

Ag@AgI等离子体负载TiO2酸蚀纳米带的制备及可见光光催化性能的研究

采用沉积-沉淀法将AgI分散到TiO2酸蚀纳米带上,然后通过光照进而分解出Ag颗粒,最终获得了Ag@AgI等离子体负载的TiO2酸蚀纳米带(AIST)。利用UV-Vis吸收光谱、XRD、SEM对产物进行表征,并研究了可见光下对甲基橙(MO)的光催化降解性能。结果表明,纳米带酸蚀后利于AgI的沉积,Ag的表面等离子体共振效应可以增强催化剂对于可见光的吸收,使可见光下AIST的光催化降解性能显著提高。