颜色可调Sr3Y（BO3）3∶Tm3+，Dy3+荧光粉的发光性能及能量传递

采用高温固相法制备了Sr_3Y(BO_3)_3:xTm~(3+),yDy~(3+)荧光粉,并通过XRD、SEM和荧光光谱仪对样品的物相、微观形貌、发光性能、能量传递机制和CIE色坐标进行了分析。结果表明:Sr_3Y(BO_3)_3:xTm~(3+)荧光粉在监测波长为359 nm时发射蓝光,Tm~(3+)的浓度淬灭点为x=0.08;在Sr_3Y(BO_3)_3:0.08Tm~(3+),yDy~(3+)荧光粉中,随着Dy~(3+)掺杂浓度的增加,Tm~(3+)的发光强度降低而Dy~(3+)发光强度却先增加后降低,Dy~(3+)的浓度淬灭点为y=0.1;通过改变Dy~(3+)掺杂浓度或改变激发光的波长,均可实现发射光的颜色可调;在Tm~(3+)-Dy~(3+)离子之间存在能量传递。当Dy~(3+)掺杂浓度(物质的量分数)为0.15时能量传递效率达75.14%,能量传递机制为电偶极-电偶极相互作用。     

Combustion synthesis and luminescent properties of metal yttrium borates M3Y2 (BO3)4:Eu3+ (M = Ba,Sr) for PDPs applications

The polycrystalline powder samples of Eu³⁺ activated; mixed metal yttrium borate phosphors M₃Y₂(BO₃)₄ (M = Ba, Sr) with improved color purity of red emission for plasma display panels (PDPs) were prepared by solution combustion technique. The synthesis is based up on the exothermic reaction between the fuel (Urea) and oxidizer (Ammonium nitrate) .The heat generated in the reaction is utilized for auto combustion of ingredients. The formation of desired product and crystal structure was confirmed by powder XRD technique; while particle morphology was studied using FE-SEM. Samples under 254 and 147 nm excitation showed intense and pure red emission around 613 nm corresponding to the electric dipole ⁵D₀ → ⁷F₂ transition of Eu³⁺, CIE chromaticity coordinates of synthesized phosphors was found to be (x = 0.67, y = 0.32) close to National Television Standard Committee (NTSC) for red color; found suitable to employ in plasma display panels (PDPs) applications.     

Reddish-orange,neutral and warm white emissions in Eu3+, Dy3+ and Dy3+/Eu3+ doped CdO-GeO2-TeO2 glasses

Eu³⁺, Dy³⁺ and Dy³⁺/Eu³⁺ doped CdO-GeO₂-TeO₂ glasses were prepared using the melt-quenching process and analyzed by X-diffraction, Raman spectroscopy, excitation and emission spectra, and emission decay time profiles. The lack of X ray diffraction peaks revealed that all samples are amorphous. Vibrational modes associated with TeOTe and GeOGe related bonds and molecular oxygen were detected by Raman spectroscopy. The luminescence characteristics were studied upon excitations that correspond with the emission of InGaN (370–420 nm) based LEDs. The Eu³⁺ singly doped glass displayed reddish-orange global emission, with x = 0.601 and y = 0.349 CIE1931 chromaticity coordinates, upon 393 nm excitation. Neutral emission with x = 0.373 and y = 0.412 CIE1931 chromaticity coordinates and correlated color temperature (CCT) of 4400 K, was achieved in the Dy³⁺ singly doped glass excited at 388 nm. The Dy³⁺/Eu³⁺ co-doped glass exhibited warm, neutral and soft warm white emissions with CCT values of 3435, 4153 and 2740 K, under excitations at 382, 388 and 393 nm, respectively, depending mainly on the Dy³⁺ and Eu³⁺ relative excitation. The Dy³⁺ excitation bands observed in the Dy³⁺/Eu³⁺ glass by monitoring the 611 nm Eu³⁺ emission, suggest that Dy³⁺ → Eu³⁺ energy transfer takes place, despite the fact that the Dy³⁺ emission decays in the Dy³⁺ and Dy³⁺/Eu³⁺ doped glass, remain without changes. The shortening of Eu³⁺ decay in presence of Dy³⁺ was attributed to an Eu³⁺ → Dy³⁺ non-radiative energy transfer process, which according with the Inokuti-Hirayama model might be dominated through an electric quadrupole-quadrupole interaction, with efficiency and probability of 5.5% and 51.6 s⁻¹, respectively.     

Synthesis and characterization of Eu3+/Dy3+ codoped composite phosphors SrAl2Si2O8/SrAlSi1/2O7/2 via a one-pot nitrate-gel process

Composite phosphors SrAl₂Si₂O₈/SrAlSi_1/2O_7/2 codoped with Eu³⁺ and Dy³⁺ were synthesized via a simple one-pot nitrate-gel process. The thermal decomposition process of the precursor is investigated by thermal analysis, X-ray diffraction and infrared spectroscopy, respectively. The as-prepared Eu³⁺/Dy³⁺ codoped SrAl₂Si₂O₈/SrAlSi_1/2O_7/2 phosphors could yield blue (436 nm), bluegreen (486 nm), yellow (583 nm), and red (617 nm) lights under near-UV 380 nm excitation from a composite matrix produced by spontaneous phase separation during heat treatment of the precursor. Moreover, the effects of Dy³⁺ doping concentration on the structures, defect features, and luminescence properties of the composite phosphors were examined in detail.     

Blue-light-excitable broadband yellow-emitting CaGd2HfSc(AlO4)3:Ce3+ garnet phosphors for white light-emitting diode devices with improved color rendering index

The current commercial white light-emitting diodes (LEDs) are generally based on the combination of blue LED chips and Y₃Al₅O₁₂:Ce³⁺ yellow phosphors. However, because of the lack of red component, such white LED devices exhibit cool white-light emissions with low color rendering index (Ra < 75, R9 < 0). Therefore, it is urgent to discover new blue-light-excitable yellow-emitting phosphors with enhanced red emissions for fabricating high color-quality white LEDs. In the present work, we demonstrate a novel broadband yellow-emitting CaGd₂HfScAl₃O₁₂:Ce³⁺ garnet phosphor for blue-light-excited white LEDs with improved color rendering index. The as-prepared CaGd₂HfScAl₃O₁₂:Ce³⁺ garnet phosphor possesses a cubic structure with Ia$\overline{3}$d space group, and the unit cell parameters of the representative CaGd₂HfScAl₃O₁₂:2%Ce³⁺ phosphor are a = b = c = 12.450 Å, α = β = γ = 90°, and V = 1,929.59(4) ų. Impressively, we find that the CaGd₂HfScAl₃O₁₂:Ce³⁺ garnet phosphor shows an intense absorption band in the 300–500 nm wavelength range with a maximum at 452 nm owing to the 4f→5d transition of Ce³⁺ ions. On 452 nm excitation, the optimal CaGd₂HfScAl₃O₁₂:2%Ce³⁺ sample exhibits a broad asymmetric yellow emission band in the wavelength range of 470–750 nm with peak at 564 nm and full width at half maximum of 151 nm. The Commission Internationale de l’Eclairage chromaticity coordinates and internal quantum efficiency of the CaGd₂HfScAl₃O₁₂:2%Ce³⁺ sample are (0.4485, 0.5157) and 30.4%, respectively. Finally, a white LED device is fabricated by combing a 450 nm blue LED chip with commercial Y₃Al₅O₁₂:Ce³⁺ yellow-emitting phosphor, which generates white light with low color rendering index (CRI; Ra = 74.7, R9 = ?12.7) and high correlated color temperature (CCT = 6,554 K) under the 60 mA driving current. In sharp contrast, another white LED device, which is made by coating our as-prepared CaGd₂HfScAl₃O₁₂:2%Ce³⁺ yellow-emitting phosphors onto the surface of a 450 nm blue LED chip, produces white-light emission with high CRI value (Ra = 84.5, R9 = 26.3) and relatively low CCT of 5,649 K. This work reveals that the newly discovered broadband yellow-emitting CaGd₂HfScAl₃O₁₂:Ce³⁺ phosphors can serve as a potential color converter in high-color-quality phosphor-converted white LEDs.     

Structure and spectroscopic properties of (Y,Eu)(PO3)3 polyphosphate red phosphors

A series of orange-red emitting phosphor Y(PO₃)₃: xEu³⁺ (x = 0.1–1.0) was prepared by a solid-state reaction route. The phosphors were characterized by X-ray diffraction (XRD) and photoluminescence (PL) as well as decay lifetimes. Studies revealed the phase transfer from monoclinic to orthorhombic when Y³⁺ is totally replaced by Eu³⁺, and expansion of the unit cell occurs with increasing Eu³⁺ doped content. The PL spectra show that the phosphors Y(PO₃)₃: xEu³⁺ can be effectively excited by near ultraviolet (n-UV) light, and exhibit strong red-orange emission with no concentration quenching. The profile of PL spectra changes significantly at high Eu³⁺ content (x ≥ 0.80), which is due to the variation of preference for substitution of Eu³⁺. The luminescence due to the ⁵D₀ → ⁷F_J (J = 1, 2) transitions at 77 K exhibits its own spectral features for different crystallographic site. It is found that Eu³⁺ ions occupy the centers of octahedral polyhedron and form C_i/C₁ point group in Y(PO₃)₃.     

Enhanced photoluminescence of Ba2GdNbO6: Eu/Dy phosphors by Li doping

The Ba₂GdNbO₆: Eu³⁺/Dy³⁺ and Li⁺-doped Ba₂GdNbO₆: Eu³⁺/Dy³⁺ phosphors were prepared by solid-state reaction process. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and photoluminescence (PL) as well as lifetimes, was utilized to characterize the resulting phosphors. Under the excitation of ultraviolet light, the Ba₂GdNbO₆: Eu³⁺/Dy³⁺ and Li⁺-doped Ba₂GdNbO₆: Eu³⁺/Dy³⁺ show the characteristic emissions of Eu³⁺ (⁵D₀-⁷F_1,2,3 transitions dominated by ⁵D₀-⁷F₁ at 593 nm) and Dy³⁺ (⁴F_9/2-⁶H_15/2,_13/2 transitions dominated by ⁴F_9/2-⁶H_15/2 at 494 nm), respectively. The incorporation of Li⁺ ions into the Ba₂GdNbO₆: Eu³⁺/Dy³⁺ phosphors has enhanced the PL intensities depending on the doping concentration of Li⁺, and the highest emission was obtained in Ba₂Gd_0.9NbO₆: 0.10Eu³⁺, 0.01Li⁺ and Ba₂Gd_0.95NbO₆: 0.05Dy³⁺, 0.07Li⁺, respectively. An energy level diagram was proposed to explain the luminescence process in the phosphors.     

Luminescent properties of SrBPO5:Dy3+ and effect of Co-doping with Tm3+

A series of phosphors SrBPO₅:Dy³⁺ and SrBPO₅:Dy³⁺,Tm³⁺ was synthesized by traditional solid-state high-temperature method and was characterized by X-ray diffraction (XRD) and fluorescence spectrophotometry. For SrBPO₅:Dy³⁺ material, the f-f transitions of Dy³⁺ ions were assigned and discussed, and the optimal doping concentration of Dy³⁺ was found. As a result of co-doping SrBPO₅:Dy³⁺ with Tm³⁺, the phosphors SrBPO₅:Dy³⁺,Tm³⁺ can be effectively excited by 360 nm ultraviolet (UV), and exhibit color-tunable emission from blue to yellowish-white region with different doping concentration. The present study can pave the way for the creation of efficient UV phosphors using Dy³⁺,Tm³⁺ co-doped systems for near-UV InGaN-based light emitting diodes (LEDs).     

A near-infrared phosphor doped with Cr3+ towards zero-thermal-quenching for high-power LEDs

Cr³⁺-doped phosphors show significant application potential in near-infrared (NIR) light-emitting diodes (LEDs). However, the development of thermally stable and efficient NIR phosphors still faces enormous challenges. Herein, NIR phosphors K₂NaMF₆:Cr³⁺ (M³⁺ = Al³⁺, Ga³⁺, and In³⁺) were synthesized by the hydrothermal method. The represented K₂NaAlF₆:Cr³⁺ phosphor can be effectively excited by blue light (～430 nm) to present broadband emission at half a maximum of 96 nm peaking at ～ 728 nm. Meanwhile, the K₂NaAlF₆:Cr³⁺ phosphor exhibits excellent internal quantum efficiency (IQE = 68.08%) and nearly zero-thermal-quenching behavior, which is able to maintain 96.5% emission intensity at 150 °C of the initial value at 25 °C. The NIR phosphor-converted LED was fabricated based on K₂NaAlF₆:Cr³⁺ phosphor and a blue LED chip, showing a NIR output power of 394.39 mW at 300 mA with a high photoelectric conversion efficiency of 10.9% at 20 mA. Using the high-power NIR LED as a lighting source, transparent and quick veins imaging as well as non-destructive testing were demonstrated, suggesting the NIR phosphor has a wide range of practical applications.     

Optical and luminescence properties of Dy3+ ions in phosphate based glasses

Phosphate glasses with compositions of 44P₂O₅ + 17K₂O + 9Al₂O₃ + (30 − x)CaF₂ + xDy₂O₃ (x = 0.05, 0.1, 0.5, 1.0, 2.0, 3.0 and 4.0 mol %) were prepared and characterized by X-ray diffraction (XRD), differential thermal analysis (DTA), Fourier transform infrared (FTIR), optical absorption, emission and decay measurements. The observed absorption bands were analyzed by using the free-ion Hamiltonian (H_FI) model. The Judd–Ofelt (JO) analysis has been performed and the intensity parameters (Ω_λ, λ = 2, 4, 6) were evaluated in order to predict the radiative properties of the excited states. From the emission spectra, the effective band widths (Δλ_eff), stimulated emission cross-sections (σ(λ_p)), yellow to blue (Y/B) intensity ratios and chromaticity color coordinates (x, y) have been determined. The fluorescence decays from the ⁴F_9/2 level of Dy³⁺ ions were measured by monitoring the intense ⁴F_9/2 → ⁶H_15/2 transition (486 nm). The experimental lifetimes (τ_exp) are found to decrease with the increase of Dy³⁺ ions concentration due to the quenching process. The decay curves are perfectly single exponential at lower concentrations and gradually changes to non-exponential for higher concentrations. The non-exponential decay curves are well fitted to the Inokuti–Hirayama (IH) model for S = 6, which indicates that the energy transfer between the donor and acceptor is of dipole–dipole type. The systematic analysis of revealed that the energy transfer mechanism strongly depends on Dy³⁺ ions concentration and the host glass composition.     

Recent Research Progress of Red Phosphors for PDPs Applications

The commercial vacuum ultraviolet (VUV) red phosphor (Y, Gd)BO₃:Eu³⁺ has low luminous efficiency and poor color purity. Our work aims to overcome this drawback and we mainly devote to investigating the luminescence mechanism, improving the commercial red phosphor, and seeking for new red emitting VUV materials with high efficiency. Based on the investigation of the photoluminescence mechanism of VUV phosphors, both the luminous efficiency and the color purity of (Y, Gd)BO₃:Eu³⁺ are improved. Additionally, a series of novel VUV red phosphors have been developed, such as (Gd,Y)Al₃(BO₃)₄:Eu³⁺ and (La,Gd)P₃O₉:Eu³⁺. This presentation is a review about the recent research progress of red phosphors for plasma displays (PDPs) applications in our group.     

Luminescence properties of Dy3+ or/and Sm3+ doped LiLa(WO4)2 phosphors and energy transfer from Dy3+ to Sm3+

The Dy³⁺ or/and Sm³⁺ doped LiLa(WO₄)₂ phosphors are synthesized by a facile solid state reaction method. The phase and luminescence properties of the phosphors are investigated. The powder X-ray diffraction (XRD) results show that the phosphor has a tetragonal phase crystal structure. The quenching concentration of single doped Dy³⁺ and Sm³⁺ in the LiLa(WO₄)₂ are determined to be 6% and 3%, respectively. Under the excitation of 404 nm, warm white light is obtained in the co-doped phosphors. With the concentration of Sm³⁺ increasing, the correlated color temperature (CCT) gradually decreases from 3090 to 2453 K. Two kinds of energy transfer may exist at the same time. The overlap between the emission spectrum of Dy³⁺ and the excitation spectrum of Sm³⁺ reveals that the energy of Dy³⁺ can transfer to Sm³⁺ via radiation. Another way of energy transfer, that is non-radiative energy transfer, is attributed to the excited state of Dy³⁺ (⁴F_9/2) slightly higher than that of Sm³⁺ (⁴I_19/2). The calculation results show that non-radiative energy transfer process from Dy³⁺ to Sm³⁺ ions is predominated by quadrupole–quadrupole interaction.     

Tuning luminescent properties through solid-solution in (Ba1−xSrx)9Sc2Si6O24:Ce3+,Li+

A solid-solution of cerium-substituted alkaline earth scandium silicate phosphors, (Ba_1−xSr_x)₉Sc₂Si₆O₂₄:Ce³⁺,Li⁺ (x = 0, 0.25, 0.50, 0.75, 1), have been prepared by solid-state reaction. The structures, characterized using synchrotron X-ray powder diffraction, show the solid-solution closely follows Vegard's law. The substitution of Sr for Ba results in a decrease of the alkaline earth–oxygen bond distances by more than 0.1 Å at all three crystallographic sites, leading to changes in optical properties. The room temperature photoluminescent measurements show the structure has three excitation peaks corresponding to Ce³⁺ occupying the three independent alkaline earth sites. The emission of (Ba_1−xSr_x)₉Sc₂Si₆O₂₄:Ce³⁺,Li⁺ is red-shifted from the near-UV (λ_max = 384 nm) for x = 0 to blue (λ_max = 402 nm) for x = 1. The red-shifted photoluminescent quantum yield also increases when Sr is substituted for Ba in these compounds.     

Synthesis and VUV-UV spectroscopic properties of rare earth borosilicate oxyapatite: RE5Si2BO13:Ln (RE=La, Gd, Y; Ln=Eu, Tb)

Three rare earth borosilicate oxyapatites, RE₅Si₂BO₁₃ (RE=La, Gd, Y), were synthesized via wet chemical method, of which RE₅Si₂BO₁₃ (RE=Gd, Y) were first reported in this work. In the three oxyapatites, [BO₄] and [SiO₄] share the [TO₄] tetrahedral oxyanion site, and RE³⁺ ions occupy all metal sites. The differential scanning calorimetry-thermo gravimetry measurements and high temperature powder X-ray diffraction pattern revealed a vitrification process within 300-1200 °C, which was due to the glass-forming nature of borosilicates. From the VUV excitation spectra of Eu³⁺ and Tb³⁺ in RE₅Si₂BO₁₃, the optical band gaps were found to be 6.31, 6.54 and 6.72 eV for RE₅Si₂BO₁₃ (RE=La, Gd, Y), respectively. The emission and excitation bands of Eu³⁺ and Tb³⁺ are discussed relating with their coordination environments. Among the three hosts, Y₅Si₂BO₁₃ would be the best for Eu³⁺ and Tb³⁺-doped phosphors.     

Enhancement of the photoluminescence and long afterglow properties of Ca<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript> phosphor by Dy<Superscript>3+</Superscript> co-doping

The Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ long afterglow phosphors were synthesized under a weak reducing atmosphere by the traditional high temperature solid state reaction method. The synthesized phosphors were characterized by powder X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) techniques. The luminescence properties were investigated using thermoluminescence (TL), photoluminescence (PL), long afterglow, mechanoluminescence (ML), and ML spectra techniques. The crystal structure of sintered phosphors was an akermanite type structure, which belongs to the tetragonal crystallography. TL properties of these phosphors were investigated, and the results were also compared. Under the ultraviolet excitation, the emission spectra of both prepared phosphors were composed of a broad band peaking at 535 nm, belonging to the broad emission band. When the Ca₂MgSi₂O₇:Eu²⁺ phosphor is co-doped with Dy³⁺, the PL, afterglow and ML intensity is strongly enhanced. The decay graph indicates that both the sintered phosphors contain fast decay and slow decay process. The ML intensities of Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors were proportionally increased with the increase of impact velocity, which suggests that this phosphor can be used as sensors to detect the stress of an object.     

微乳液法合成白光LED NaLu(MO4)2:Eu3+/Eu3+,Tb3+(M=W, Mo)荧光粉

采用微乳液法制备NaLu(WO₄)_2-x(MoO₄)x:8%Eu³⁺(x=0, 0.5, 1.0, 1.5, 2.0)/y%Eu³⁺,5%Tb³⁺(y=1, 3, 5, 7, 9)系列荧光粉.通过X射线衍射(XRD)表征,所制样品的X射线衍射峰与标准卡片PDF#27-0729基本吻合,表明所制的样品为白钨矿结构,属于四方晶系.扫描电镜SEM显示制备的纳米粒子是梭子状的,粒径大约是110 nm.激发发射光谱显示,在Eu³⁺离子掺杂浓度为8%时,NaLu(WO₄)(MoO₄):Eu³⁺发光强度最大.NaLu(WO₄)_2-x(MoO)x :8%Eu³⁺(x=0, 0.5, 1.0, 1.5, 2.0)荧光粉在Mo/W比达到1:1(x=1)时发光强度最大,强烈的红光发射表明该材料可用于白光LED材料.该荧光粉在268、394和466 nm波长光激发下分别发出橙红色、黄色和淡黄色光,可以满足不同光色需要.NaLu(WO)(MoO):y%Eu³⁺,5%Tb³⁺(y=1, 3, 5, 7, 9)荧光粉,随着y值增大,从绿光区(x=0.278, y=0.514)进入白光区(x=0.356, y=0.373), (x=0.278, y=0.313),同时观察到Tb³⁺到Eu³⁺有效能量传递.     

Er3+-Tm3+-Yb3+ tri-doped CaMoO4 upconverting phosphors in optical devices applications

The structural and optical properties of the Er³⁺-Tm³⁺-Yb³⁺codoped CaMoO₄ phosphors prepared by chemical route have been explored. The crystalline structures of the prepared phosphors have been investigated with the help of X-ray diffraction analysis. The presence of different vibrational modes and absorption bands arising due to the transitions from the ground state to different excited states of rare earth ions have been identified using the Raman and UV-VIS-NIR absorption spectra of the developed phosphor, respectively. The concentration quenching effect on the luminescence property of the prepared materials has been explained in detail. The upconversion luminescence property of the Er³⁺-Tm³⁺-Yb³⁺codoped CaMoO₄ phosphor annealed at different temperatures under 980 nm and 808 nm excitations have been reported. The energy transfer Er³⁺ → Tm³⁺, Yb³⁺ → Er³⁺ and Tm³⁺ has been found to be responsible for efficient UC emission. The dipole-dipole interaction is observed to be responsible for the concentration quenching of the luminescence intensity. The effect of annealing temperature on the upconversion luminescence property has been explained in detail. The results suggest that the developed tri-doped phosphor may be suitable in making the efficient NIR to visible upconverter and lighting based optical devices.     

A new promising phosphor, Na3La2(BO3)3:Ln (Ln=Eu, Tb)

We present an efficient way to search a host for ultraviolet (UV) phosphor from UV nonlinear optical (NLO) materials. With the guidance, Na₃La₂(BO₃)₃ (NLBO), as a promising NLO material with a broad transparency range and high damage threshold, was adopted as a host material for the first time. The lanthanide ions (Tb³⁺ and Eu³⁺)-doped NLBO phosphors have been synthesized by solid-state reaction. Luminescent properties of the Ln-doped (Ln=Tb³⁺, Eu³⁺) sodium lanthanum borate were investigated under UV ray excitation. The emission spectrum was employed to probe the local environments of Eu³⁺ ions in NLBO crystal. For red phosphor, NLBO:Eu, the measured dominating emission peak was at 613 nm, which is attributed to ⁵D₀-⁷F₂ transition of Eu³⁺. The luminescence indicates that the local symmetry of Eu³⁺ in NLBO crystal lattice has no inversion center. Optimum Eu³⁺ concentration of NLBO:Eu³⁺ under UV excitation with 395 nm wavelength is about 30 mol%. The green phosphor, NLBO:Tb, showed bright green emission at 543 with 252 nm excited light. The measured concentration quenching curve demonstrated that the maximum concentration of Tb³⁺ in NLBO was about 20%. The luminescence mechanism of Ln-doped NLBO (Tb³⁺ and Eu³⁺) was analyzed. The relative high quenching concentration was also discussed.     

Dual-mode luminescence of Er3+/Yb 3+ codoped LnP0.5V0.5O4 (Ln=Y,Gd, La) for highly sensitive optical nanothermometry

The luminescence properties of 2%Er³⁺/15%Yb³⁺ doped LnP_0.5V_0.5O₄ (LnPVO₄) (Ln = Y, Gd, La) phosphors, synthesized via the traditional citric-assisted Sol gel method, are studied under light excitations of 980 nm and 325 nm to generate the ²H_11/2/⁴S_3/2–⁴I_15/2 transitions via up- and downshifting mechanisms, respectively. The phase purity of the samples was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). We present herein a comparative study of the spectral and temperature sensing properties of LnPVO₄: Er³⁺/Yb³⁺ (Ln = Y, Gd, La) phosphors. The crystal field effects on the up-shifting luminescence and on the thermometric parameters are investigated by the substitution of Er³⁺ ions on Y³⁺, Gd³⁺ or La³⁺ sites in the YPVO₄, GdPVO₄ and LaPVO₄ hosts respectively. Fluorescence intensity ratio (FIR) technique was used to study the temperature sensing behavior of the phosphors. This study showed that downshifting emission gives the highest thermal sensitivities and the greatest thermal resolution compared to downshifting emission. These outcomes indicate that these materials are preferred for use in the luminescence temperature sensing in a down-conversion process to provide the greatest performance.     

Structure, thermal stability and properties of Li3Sc(BO3)2

Polycrystalline Li₃Sc(BO₃)₂ was synthesized through the solid-state reaction, which is air-, water- and thermal-stable below about 929 °C. Its crystal structure was resolved and refined on the basis of powder X-ray diffraction data. The metal-borate framework is built up from ScO₆ octahedra connected to each other by sharing common edges, corners and faces of BO₃ units and LiO₄ groups. Coordination surrounding of B-O in this structure, [BO₃]³⁻ group, was confirmed by an infrared absorption spectrum of an Li₃Sc(BO₃)₂. According to the electronic structure calculated by first-principles calculations, an Li₃Sc(BO₃)₂ is an insulator with a wide indirect energy band gap of about 4.4 eV. Considering the facile synthesis, large band gap, and thermal stability and excellent Tb³⁺-doped photoluminescence characteristics of this compound in general, it may be a good candidate as host of phosphors deposited on chip of the light-emitting diodes for white-color conversion.