Partial molal heat capacity of aqueous ferrous chloride from measurements of integral heats of dilution

Heats of dilution of concentrated aqueous solutions (4.43 moles-kg^–1) of FeCl₂ were measured at 15, 25, and 35°C. The heat capacities of these concentrated solutions were also measured at the same temperatures. From these data the partial molal heat capacity, C _p2 ⁰ (FeCl₂, aq, 298.15°K)=–2.56±30 J–°K^–1–mole^–1, was calculated. The partial molal heat capacity of Fe²⁺(aq), –2±30 J-°K^–1-mole^–1, was correlated with the correspondence principle equations of Criss and Cobble.     

The speed of sound in mixtures of the major sea salts. A test of Young's rule for adiabatic PVT properties

The relative sound speed of mixtures of aqueous solutions of NaCl–MgSO₄ and MgCl₂–Na₂SO₄ at I=0.1 and 0.5m have been determined at 5, 15, and 25°C and pressures to 1000 bars. The resulting sound speeds, adiabatic and apparent molal compressibilities have been compared to results estimated from binary solutions using an additivity principle — Young's rule. The estimated sound speeds agree with the measured values for the NaCl–MgSO₄ system to ±0.15 m-sec^–1 and for the Na₂SO₄–MgCL₂ system to ±0.20 m-sec^–1. The deviations increase with increasing ionic strength (±0.08 m-sec^–1 at I=0.1 and ±0.25 m-sec^–1 at I=0.5 m).The sound speed of seawater have also been estimated from 0 to 40°C, 0.1 to 0.7 ionic strength and 0 to 1000 bars. The estimates were found to be in good agreement (±0.4 m-sec^–1) with the measured values.These results indicate that reasonable estimates of the adiabatic PVT properties of dilute mixtures of electrolyte solutions can be made using the additivity principle, without excess mixing terms.     

Isopiestic determination of the osmotic and activity coefficients of aqueous Lu2(SO4)3 at 25°C

Osmotic coefficients have been measured for aqueous Lu₂(SO₄)₃ solutions from 0.12402 to 0.89631 mol-kg^–1 at 25°C by use of the isopiestic method; these measurements extend into the supersaturated molality region. Since there was a lack of activity data for Lu₂(SO₄)₃ solutions at lower molalities, they were approximated by equating them to results for La₂(SO₄)₃ from freezing temperature depression measurements. The combined osmotic coefficients were then used to derive mean molal activity coefficients for Lu₂(SO₄)₃ solutions. The osmotic coefficients decrease to 0.307 as their minimum value and the mean molal activity coefficients decrease to 0.0069. When these activities were combined with our previously reported solubility of 0.6260±0.0017 mol-kg^–1 for Lu₂(SO₄)₃·8H₂O, a thermodynamic solubility product of 2.3×10^–10 was obtained. This value yields the Gibbs energy of formation G _f ^° (Lu₂(SO₄)₃·8H₂O, cr)=–5518.9±16.4 kJ-mol^–1.     

Oxidation of SO2 to sulfate in sea salt aerosols

Summary In laboratory-scale experiments sea salt particles are exposed to SO₂ at a temperature of 22°C and relative humidities of 40, 60 and 80%; the SO₂ gas concentration is fixed to 0.2, 0.5 and 1.0 ppm (v), respectively. In further test series NO₂ is added to the gas phase. As kinetic data the capacity values of the sea salt particles (mg formed sulfate/g dry aerosol) are determined as function of time and from this the reaction rates (mg formed sulfate/g dry aerosol and minute) are calculated in dependence of the yield. The relative humidity (r.h.) has proved to be a decisive reaction parameter. For example, the rate (at a reaction time of one hour) increases at a SO₂ concentration of 0.5 ppm (v) from 0.01 to approx. 0.1 mg SO ₄ ^2– /g·min, if the r.h. will increase from 40 to 80%. However, the gas concentration has only an importance at high humidities (where the reaction takes place in droplets) for the sulfate formation in sea salt aerosols. If the SO₂ concentration is reduced from 1.0 to 0.2 ppm (v) at a r.h. of 80%, the rate will be decreased from 0.2 to about 0.07 mg SO ₄ ^2– /g·min; however, at a r.h. of 60% from 0.075 to 0.04 mg SO ₄ ^2– /g·min. As an increased sulfate formation but no nitrate formation can be detected when NO₂ is added to the gas phase, it can be assumed that SO₂ is oxidized in the electrolyte layer around the sea salt particles whereas NO₂ is reduced. If NO₂ (SO₂:NO₂=1:1) is added to the gas phase, the rate — for example at a r.h. of 40% — will be increased from 0.01 to 0.24 mg SO ₄ ^2– /g·min.     

Dissociation quotients of oxalic acid in aqueous sodium chloride media to 175°C

The first and second molal dissociation quotients of oxalic acid were measured potentiometrically in a concentration cell fitted with hydrogen electrodes. The emf of oxalic acid-bioxalate solutions was measured relative to an HCl standard solution from 25 to 125°C over 25^o intervals at nine ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The molal dissociation quotients and available literature data were treated in the all anionic form by a five-term equation that yielded the following thermodynamic quantities at infinite dilution and 25°C: logK_1a=–1.277±0.010, H _1a ^o =–4.1±1.1 kJ-mol^–1, S _1a ^o =38±4 J-K^–1-mol^–1, and C _p,1a ^o =–168±41 J-K^–1-mol^–1. Similar measurements of the bioxalate-oxalate system were made at 25^o intervals from 0 to 175°C at seven ionic strengths from 0.1 to 5.0m. A similar regression of the experimentally-derived and published equilibrium quotients using a seven-term equation yielded the following values at infinite dilution and 25°C: logK_2a=–4.275±0.006, H _2a ^o =–6.8±0.5 kJ-mol^–1, S _2a ^o =–105±2 J-K^–1-mol^–1, and C _p,2a ^o =–261±12 J-K^–1-mol^–1.     

Determination of ratios of sulfate to bisulfate ions in aqueous solutions by Raman spectroscopy

Raman spectra are presented for aqueous ammonium bisulfate and zinc sulfate-sulfuric acid solutions over a wide range of concentration and from 20 to 85°C. The heights of the 980 cm ^–1 (primarily SO ₄ ^–2 ) and 1053 cm ^–1 (primarily HSO ₄ ^– ) bands are correlated with the pH of the solutions. The ratio of the species SO ₄ ^–2 and HSO ₄ ^– can be obtained from the ratio of scattering intensities at 980 and 1053 cm ^–1 . The H obtained from plots of the log of the concentration products versus 1/T is –37±5 kJ-mol ^–1 for ammonium bisulfate solutions and –48±4kJ-mol ^–1 for the ZnSO ₄ -H ₂ SO ₄ solutions. This compares to –22 kJ-mol ^–1 for the H of bisulfate ion dissociation as obtained from thermodynamic equilibrium constants.     

Thermosensitive properties of a novel poly(methyl 2-acetamidoacrylate-co-methyl acrylate)

Copolymerizations of methyl 2-acetamidoacrylate (MAA) with methyl acrylate (MA) were carried out at 60 °C in chloroform. MAA-rich copolymers are soluble in water and MAA-poor copolymers insoluble. Among water-soluble copolymers obtained, only one (HP-77) which contains 77% of MAA units was thermosensitive. Thermal properties of HP-77 were investigated in the presence or absence of inorganic salts. The cloud point of aqueous HP-77 solution depended on polymer concentration: The cloud point decreased exponentially with an increasing concentration of the polymer. The cloud point of HP-77 was also affected significantly by the type and concentration of salts. The effectiveness of salts to reduce the cloud point is NaBr≈KBr<NaCl≈KCl<Na₂SO₄≈K₂SO₄. The salting-out coefficients were evaluated as 2.45 l/mol for sodium chloride and 14.56 l/mol for sodium sulfate, respectively, from the relationship (Setschenow's equation) between logarithm of the solubility of HP-77 and salt concentration. The salting-out coefficient of sodium sulfate is larger than that of sodium chloride.     

Triiodide ion formation equilibrium and activity coefficients in aqueous solution

The equilibrium quotient for the formation of triiodide was studied as a function of temperature, 3.8–209.0°C, and ionic strength, 0.02–6.61. The best-fit value for the molal equilibrium constant at 25°C is 698±10 and the corresponding partial molal enthalphy, entropy, and heat capacity of formation are: H^o=–17.0±0.6 kJ-mol^–1, S^o=–0.6±0.3 J-K^–1-mol^–1, and C _p ^o =–21±8 J-K^–1-mol^–1. Activity coefficients of iodine were determined as a function of ionic strength (NaClO₄) at 25°C and conclusions are drawn as to the corresponding ionic strength dependence of the triiodide anion.     

Dissociation quotients of malonic acid in aqueous sodium chloride media to 100°C

The first and second molal dissociation quotients of malonic acid were measured potentiometrically in a concentration cell fitted with hydrogen electrodes. The hydrogen ion molality of malonic acid/bimalonate solutions was measured relative to a standard aqueous HCl solution from 0 to 100°C over 25° intervals at five ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The molal dissociation quotients and available literature data were treated in the all anionic form by a seven-term equation. This treatment yielded the following thermodynamic quantities for the first acid dissociation equilibrium at 25°C: logK _1a =-2.852±0.003, H _1a ^/o =0.1±0.3 kJ-mol^–1, S _1a ^o =–54.4±1.0 J-mol^–1-K^–1, and C _p,1a ^o =–185±20 J-mol^–1-K^–1. Measurements of the bimalonate/malonate system were made over the same intervals of temperature and ionic strength. A similar regression of the present and previously published equilibrium quotients using a seven-term equation yielded the following values for the second acid dissociation equilibrium at 25°C: logK_2a=–5.697±0.001, H _2a ^o =–5.13±0.11 kJ-mol^–1, S _2a ^o =–126.3±0.4 J-mol^–1-K^–1, and C _p,2a ^o =–250+10 J-mol^–1-K^–1.Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.     

Dissociation quotients of succinic acid in aqueous sodium chloride media to 225°C

The first and second molal dissociation quotients of succinic acid were measured potentiometrically with a hydrogen-electrode, concentration cell. These measurements were carried out from 0 to 225°C over 25° intervals at five ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The dissociation quotients from this and two other studies were combined and treated with empirical equations to yield the following thermodynamic quantities for the first acid dissociation equilibrium at 25°C: log K_1a=–4.210±0.003; H _1a ⁰ =2.9±0.2 kJ-mol^–1; S _1a ⁰ =–71±1 J-mol^–1-K^–1; and C _p1a ⁰ =–98±3 J-mol^–1-K^–1; and for the second acid dissociation equilibrium at 25°C: log K_2a=–5.638±0.001; H _2a ⁰ = –0.5±0.1 kJ-mol^–1; S _2a ⁰ =–109.7±0.4 J-mol^–1-K^–1; and C _p2a ⁰ = –215±8 J-mol^–1-K^–1.     

Chronopotentiometric determination of the outer-sphere association constants of substitution-inert metal complexes

Summary A new method for the determination of association constants by the measurement of chronopotentiometric transition time has been developed and applied to the study on the outer-sphere association of some substitution-inert complex cations with sulphate ions. The association constants were determined from the change in transition time as function of the concentration of sulphate ions at ionic strength 0.1 (NaClO₄) and 25° C: 93 ±8 for [Co(NH₃)₆]³⁺SO₄ ^2–, 99 ±15 for [Co(en)₃]³⁺SO₄ ^2–, 61 ±7 for [Cr(NH₃)₆]³⁺SO₄ ^2– and 58 ±8 for [Cr(en)₃]³⁺SO₄ ^2–. The ratios of the diffusion coefficients of the univalent ion-pairs and tervalent substitution-inert complex cations were also obtained. From these ratios the diffusion coefficients of the univalent ion-pairs were calculated, which were found to differ not greatly from those of univalent complex ions with similar structures.

---

Zusammenfassung Eine neue Methode zur Bestimmung von Assoziationskonstanten aus den Transitionszeiten chronopotentiometrischer Messungen wurde entwickelt. Sie wurde zur Untersuchung der Assoziation von Sulfationen in zweiter Sphäre an koordinativ abgesättigten Komplex-Kationen herangezogen. Die Assoziationskonstanten wurden aus der Abhängigkeit der Transitionszeit von der Sulfatkonzentration in Medien der Ionenstärke 0,1 (NaClO₄) und bei 25° C bestimmt. Man erhält folgende Werte: 93±8 für [Co(NH₃)₆]³⁺SO₄ ^2–, 99±15 für [Co(en)₃]³⁺SO₄ ^2–, 61±7 für [Cr(NH₃)₆]³⁺SO₄ ^2– und 58±8 für [Cr(en)₃]³⁺SO₄ ^2–. Die Verhältnisse der Diffusionskoeffizienten der einwertigen Ionenpaare zu denen der dreiwertigen Komplex-Kationen wurden ebenfalls bestimmt. Aus diesen Verhältnissen lassen sich die Diffusionskoeffizienten der Ionenpaare berechnen. Man erhält eine gute Übereinstimmung mit den Werten für einwertige Komplexionen mit ähnlicher Struktur.

---

---

Dedicated to Prof. Dr. M. von Stackelberg on his 70th birthday.     

Raman and infrared spectroscopic investigation of contact ion pair formation in aqueous cadmium sulfate solutions

Raman and IR data for aqueous CdSO₄ and (NH₄)₂SO₄ solutions have been recorded over broad concentration and temperature ranges. Whereas the v₁-SO ₄ ^2– band profile is symmetrical in (NH₄)₂SO₄ solutions, in CdSO₄ solutions a shoulder appears on the high frequency side which increases in intensity with increasing concentration and temperature. The molar scattering coefficient of the v₁-SO ₄ ^2– band is the same for all forms of sulfate in (NH₄)₂SO₄ and CdSO₄ solutions and is independent of temperature up to 99°C. The high frequency shoulder is attributed to the formation of a contact ion pair [Cd²⁺OSO ₃ ^2– ] (11 associate). Also the v₃-SO ₄ ^2– antisymmetric stretching mode shows a splitting in the CdSO₄ solution. Further spectroscopic evidence for contact ion pair formation is provided by IR spectroscopy. No higher associates or anionic complexes are required to interpret the spectroscopic data. The degree of association has been measured as a function of concentration and temperature. The thermodynamic association constant, K_A=0.15±0.05 kg-mol^–1 at 25°C is estimated from the Raman data by an extrapolation procedure by taking account of the activity coefficients. Values are reported for the activity coefficient of the ion pair. From the Raman temperature dependence studies, the enthalpy of formation for the contact ion pair is estimated to be 10±1 kJ-mol^–1.     

Cubic structure II double clathrate hydrates with tetra(n-propyl)ammonium fluoride

A double clathrate hydrate with the composition THF·0.5(n-Pr)₄NF·16H₂O and cubic structure II (CS-II,a=17.67 Å) has been obtained. Its experimental density is 1.053±0.001 g/cm³; its melting point is 8.1°C, i.e. 3.1°C higher than that of the THF·17H₂O hydrate. The double hydrates of acetone, 1,4-dioxan, trimethyleneoxide and 1,3-dioxolane with (n-Pr)₄NF have melting points of –14.8, –5.5, –2.6 and –9.6°C, respectively. With pressure increase up to 6 kbar the melting points of the double hydrates increase monotonously in contrast to common CS-II hydrates. The friability of the structure of the hydrates (the packing coefficient) and their sensitivity to pressure (dT/dP) are compared.The results of this work have been reported at the International Seminar on Inclusion Compounds, Jaszowiec (Poland), 24–26th September 1987.     

Effect of acrylamide concentration on the kinetics of oxidation of tartaric acid by cerium(IV) in sulfuric-perchloric acid media

The kinetics of oxidation of tartaric acid by Ce(IV) in the absence and presence of acrylamide has been investigated spectrophotometrically in aqueous H₂SO₄–HClO₄ media at a constant ionic strength 2.0M and 25°C. Oxidation of tartaric acid in both cases was first order with respect to Ce(IV). Kinetic data showed that the reaction involves the formation of an unstable complex and an intermediate free radical. The activation parameters were calculated to be E _a =91.3±0.4 kJ-mol^–1, S=20.2±1.0 J-mol^–1-K^–1, H=88.8±0.4 kJ-mol^–1. A polymerization mechanism is discussed.     

An aqueous thermodynamic model for a high valence 4∶2 electrolyte Th4+−SO 4 2− in the system Na+−K+−Li+−NH 4 + −Th4+−SO 4 2− −HSO 4 − −H2O to high concentration

An aqueous thermodynamic model that is valid from zero to high concentration is proposed for the Na⁺–K⁺–Li⁺–NH ₄ ⁺ –Th⁴⁺–SO ₄ ^2– –HSO ₄ ^– –H₂O system. The model is based on the aqueous ion-interaction model of Pitzer and coworkers. The thorium sulfate complex species Th(SO₄)₂(aq) and Th(SO₄) ₃ ^2– are also included in the model. The final thermodynamic model presented here accurately predicts all reliable thermodynamic data, including solvent extraction and solubility data, for the Na⁺–K⁺–Li⁺–NH ₄ ⁺ –Th⁴⁺–SO ₄ ^2– –HSO ₄ ^– –H₂O system to high concentration. The aqueous thermodynamics of high-valence (3:2, 4:2), electrolytes are complicated by very strong specific ion interactions or ion pairing in dilute solution and by an effective redissociation of aqueous complex species at high concentration. Methods of treating these complications, in terms of valid aqueous thermodynamic models, are discussed in detail for the high-valence Th⁴⁺–SO ₄ ^2– –H₂O system.     

Dissociation quotient of benzoic acid in aqueous sodium chloride media to 250°C

The dissociation quotient of benzoic acid was determined potentiometrically in a concentration cell fitted with hydrogen electrodes. The hydrogen ion molality of benzoic acid/benzoate solutions was measured relative to a standard aqueous HCl solution at seven temperatures from 5 to 250°C and at seven ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The molal dissociation quotients and selected literature data were fitted in the isocoulombic (all anionic) form by a six-term equation. This treatment yielded the following thermodynamic quantities for the acid dissociation equilibrium at 25°C and 1 bar: logK_a=–4.206±0.006, H _a ^o =0.3±0.3 kJ-mol^–1, S _a ^o =–79.6±1.0 J-mol^–1-K^–1, and C _p;a ^o =–207±5 J-mol^–1-K^–1. A five-term equation derived to describe the dependence of the dissociation constant on solvent density is accurate to 250°C and 200 MPa.     

Raman spectroscopic study of aqueous (NH4)2SO4 and ZnSO4 solutions

The Raman spectra of the v₁-SO ₄ ^2– band in 0.5–2.5 molar aqueous (NH₄)₂SO₄ and ZnSO₄ solutions in the temperature range 25–85°C were studied. The molar scattering coefficient of the v₁ band is the same for all forms of sulfate in (NH₄)₂SO₄ and ZnSO₄ solutions and is independent of temperature up to 85°C. The v₁ band profile is symmetrical in (NH₄)₂SO₄ solutions. In ZnSO₄ solutions, a shoulder appears on the high frequency side which increases slightly in intensity with increasing concentration and temperature. This high frequency component is attributed to the formation of the contact ion pair (Zn²⁺·SO ₄ ^2– ). The enthalpy of formation for the contact ion pair is estimated from the Raman data to be approximately 3 kJ-mol^–1 which is in reasonable agreement with measurements by other methods.     

The enthalpies of dilution of phosphate solutions at 30°C

The enthalpies of dilution of aqueous solutions of HCl, H₃PO₄, NaOH, NaH₂PO₄, Na₂HPO₄ and Na₃PO₄ in the molality range 0.1 to 1.0 mole-kg^–1 have been determined at 30°C. The relative apparent molal enthalpies _L of HCl, NaOH, NaH₂PO₄ and Na₂HPO₄ have been determined with the aid of an extended form of the Debye-Hückel limiting law. The relative apparent molal enthalpies for Na₃PO₄ solutions have been corrected for hydrolysis. A value of H _H ^o =9525±150 cal-mole^–1 was determined for the heat of hydrolysis of PO ₄ ^–3 . This value gives H ₃ ^o =3815±150 cal-mole^–1 for the ionization of H₂PO ₄ ^– , which is in good agreement with the value of H ₃ ^o =3500±500 cal-mole^–1 determined directly by Pitzer at 25°C. The relative apparent molal enthalpies for H₃PO₄ solutions have been corrected for ionization. A value of H ₁ ^o =–1900±150 cal-mole^–1 was obtained for the heat of ionization of H₃PO₄ to H⁺+H₂PO ₄ ^– . This value is in good agreement with the value of H ₁ ^o =–2031 cal-mole^–1 at 30°C determined by Harned and Owen from the temperature coefficient of the equilibrium constant and H ₁ ^o =–1950±80 cal-mole^–1 at 25°C determined from calorimetry by Pitzer.     

Static and Kinetic Studies on the Adsorption Behavior of Sulfadiazene

To investigate the nature of interactive forces between sulfadiazene molecules and alumina surface the experiments were performed for the adsorption of sulfadiazene (SD) from its aqueous sulution onto the alumina surfaces at 25 ± 0.2°C and the influence of factors such as increasing concentration of SD (4.0–20.0 × 10^–3 mol cm^–3), the time required for adsorption equilibrium, pH (2.0–12.0) and temperature (5–45°C) of the adsorption medium, the presence of ions like Cl^–, SO^2– ₄ and PO^3– ₄ (0.01–0.30 M) and organic solvents (5% v/v) were observed on the course of adsorption of SD. Various adsorption and kinetic parameters such as adsorption coefficient, the rate constants for adsorption and desorption were also evaluated. The results of the above cited studies facilitated to formulate the mechanisms of interaction between SD and alumina surfaces. From application view point the present work may be a potential tool for an effective chromatographic separation of sulfa drugs from industrial effluents.     

Conductivity measurements and relative association constants of some 3:1 electrolytes

Conductance measurements are reported for dilute aqueous solutions at 25°C of potassium hexacyanoferrate(III) and of sodium, potassium, rubidium, and cesium octacyanotungstate(V). The results are interpreted in terms of ion-pair formation, and association constants for the formation of these ion pairs are calculated. For the ion pairs MW(CN) ₈ ^2– , the results are: M=Na, 12±8; K, 23±7; Rb, 37±10; and Cs, 51±4M ^–1, at 25°C and zero ionic strength.