D3h‐Symmetric Porphyrin‐Based Rigid Macrocyclic Ligands for Multicofacial Multinuclear Complexes in a One‐Nanometer‐Sized Cavity

The one‐step synthesis of D_3h‐symmetric cyclic porphyrin trimers 1 composed of three 2,2′‐[4,4′‐bis(methoxycarbonyl)]bipyridyl moieties and three porphyrinatozinc moieties was achieved from a nickel‐mediated reductive coupling of meso‐5,15‐bis(6‐chloro‐4‐methoxycarbonylpyrid‐2‐yl)porphyrinatozinc. Although cyclic trimers 1 were obtained as a mixture that included other cyclic and acyclic porphyrin oligomers, an extremely specific separation was observed only for cyclic trimers 1 when using columns of silica gel modified with pyrenylethyl, cyanopropyl, and other groups. Structural analysis of cyclic trimers 1 was carried out by means of NMR spectroscopy and X‐ray crystallography. Treatment of an η³‐allylpalladium complex with a cyclic trimer gave a tris(palladium) complex containing three η³‐allylpalladium groups inside the space, which indicated that the bipyridyl moieties inside the ring could work as bidentate metalloligands.     

An inhibitor of Janus kinase 3: 4‐(4‐hydroxy­phenyl­amino)‐6,7‐di­methoxy­quinazolin‐1‐ium chloride methanol solvate

The crystal structure of the title compound, C₁₆H₁₆N₃O₃⁺·Cl^?·CH₄O (WHI‐P131, an inhibitor of Janus kinase 3), contains four hydrogen bonds. There are two hydrogen bonds within the asymmetric unit, i.e. interactions between WHI‐P131 OH and Cl^?, and between methanol and Cl^?. There is a third interaction between WHI‐P131 NH and Cl^? (related by a 2₁ screw) and a fourth between WHI‐P131 NH and methanol (related by an n‐glide). The hydrogen‐bond pattern for these interactions can be described by the first‐level hydrogen‐bond graph‐set notation D¹₁(2)D¹₁(2)D¹₁(2)D¹₁(2). The second‐level graph‐set notation (for combinations of two hydrogen bonds) was determined to be D¹₂(3)­D¹₂(3)­D²₂(4)­D²₂(9)­D²₂(14)­C¹₂(9).     

Channel‐forming solvates of 6‐chloro‐2,5‐dihydroxypyridine and its solvent‐free tautomer 6‐chloro‐5‐hydroxy‐2‐pyridone

On crystallization from CHCl₃, CCl₄, CH₂ClCH₂Cl and CHCl₂CHCl₂, 6‐chloro‐5‐hydroxy‐2‐pyridone, C₅H₄ClNO₂, (I), undergoes a tautomeric rearrangement to 6‐chloro‐2,5‐dihydroxypyridine, (II). The resulting crystals, viz. 6‐chloro‐2,5‐dihydroxypyridine chloroform 0.125‐solvate, C₅H₄ClNO₂·0.125CHCl₃, (IIa), 6‐chloro‐2,5‐dihydroxypyridine carbon tetrachloride 0.125‐solvate, C₅H₄ClNO₂.·0.125CCl₄, (IIb), 6‐chloro‐2,5‐dihydroxypyridine 1,2‐dichloroethane solvate, C₅H₄ClNO₂·C₂H₄Cl₂, (IIc), and 6‐chloro‐2,5‐dihydroxypyridine 1,1,2,2‐tetrachloroethane solvate, C₅H₄ClNO₂·C₂H₂Cl₄, (IId), have I4₁/a symmetry, and incorporate extensively disordered solvent in channels that run the length of the c axis. Upon gentle heating to 378 K in vacuo, these crystals sublime to form solvent‐free crystals with P2₁/n symmetry that are exclusively the pyridone tautomer, (I). In these sublimed pyridone crystals, inversion‐related molecules form R²₂(8) dimers via pairs of N—H...O hydrogen bonds. The dimers are linked by O—H...O hydrogen bonds into R⁴₆(28) motifs, which join to form pleated sheets that stack along the a axis. In the channel‐containing pyridine solvate crystals, viz. (IIa)–(IId), two independent host molecules form an R²₂(8) dimer via a pair of O—H...N hydrogen bonds. One molecule is further linked by O—H...O hydrogen bonds to two 4₁ screw‐related equivalents to form a helical motif parallel to the c axis. The other independent molecule is O—H...O hydrogen bonded to two related equivalents to form tetrameric R⁴₄(28) rings. The dimers are π–π stacked with inversion‐related dimers, which in turn stack the R⁴₄(28) rings along c to form continuous solvent‐accessible channels. CHCl₃, CCl₄, CH₂ClCH₂Cl and CHCl₂CHCl₂ solvent molecules are able to occupy these channels but are disordered by virtue of the site symmetry within the channels.     

Hydrogen‐bonded assemblies of 20‐(4‐pyridyl)porphyrin‐54,104,154‐tribenzoic acid with dimethyl sulfoxide and 4‐acetylpyridine in their dimethyl sulfoxide and tetrahydrofuran solvates

Crystals of the title compounds, 20‐(4‐pyridyl)porphyrin‐5⁴,10⁴,15⁴‐tribenzoic acid–dimethyl sulfoxide (2/5), C₄₆H₂₉N₅O₆·2.5C₂H₆OS, (I), and 20‐(4‐pyridyl)porphyrin‐5⁴,10⁴,15⁴‐tribenzoic acid–4‐acetylpyridine–tetrahydrofuran (1/2/10), C₄₆H₂₉N₅O₆·2C₇H₇NO·10C₄H₈O, (II), consist of hydrogen‐bonded supramolecular chains of porphyrin units solvated by molecules of dimethyl sulfoxide [in (I)] and 4‐acetylpyridine [in (II)]. In (I), these chains consist of heterogeneous arrays with alternating porphyrin and dimethyl sulfoxide species, being sustained by COOH...O=S hydrogen bonds. They adopt a zigzag geometry and link on both sides to additional molecules of dimethyl sulfoxide. In (II), the chains consist of homogeneous linear supramolecular arrays of porphyrin units, which are directly connected to one another via COOH...N(pyridyl) hydrogen bonds. As in the previous case, these arrays are solvated on both sides by molecules of the 4‐acetylpyridine ligand via similar COOH(porphyrin)...N(ligand) hydrogen bonds. The two crystal structures contain wide interporphyrin voids, which accommodate disordered/diffused solvent molecules, viz. dimethyl sulfoxide in (I) and tetrahydrofuran in (II).     

Next‐Generation D2‐Symmetric Chiral Porphyrins for Cobalt(II)‐Based Metalloradical Catalysis: Catalyst Engineering by Distal Bridging

Novel D₂‐symmetric chiral amidoporphyrins with alkyl bridges across two chiral amide units on both sides of the porphyrin plane (designated “HuPhyrin”) have been effectively constructed in a modular fashion to permit variation of the bridge length. The Co^II complexes of HuPhyrin, [Co(HuPhyrin)], represent new‐generation metalloradical catalysts where the metal‐centered d‐radical is situated inside a cavity‐like ligand with a more rigid chiral environment and enhanced hydrogen‐bonding capability. As demonstrated with cyclopropanation and aziridination as model reactions, the bridged [Co(HuPhyrin)] functions notably different from the open catalysts, exhibiting significant enhancement in both reactivity and stereoselectivity. Furthermore, the length of the distal alkyl bridge can have a remarkable influence on the catalytic properties.     

A hybrid‐type,chiral π‐conjugated polymer wrapped with polyhedral oligomeric silsesquioxanes

A novel hybrid‐type chiral binaphthyl‐based polyarylene derivative with polyhedral oligomeric silsesquioxanes (POSS) units 2a was prepared by Suzuki–Miyaura coupling polymerization from a chiral (R)‐6,6′‐dibromo‐2,2′‐diPOSS‐substituted 1,1′‐binaphthyl derivative 1a and p‐biphenylene diboronic acid. As a reference, a binaphthyl‐based polyarylene derivative without POSS unit 2b was also prepared. The obtained polymers were studied with thermogravimetric analysis, optical rotations, circular dichroism (CD), ultraviolet‐visible, and photoluminescence (PL) spectra. Gel permeation chromatography measurements of 2a and 2b showed that their number‐average molecular weights were 13,300 and 16,500, respectively. The thermal stability of POSS‐modified polymer 2a (temperature of 10% weight loss; T₁₀ = 380 °C) was extremely high compared with that of polymer without POSS unit 2b (T₁₀ = 335 °C) due to the siliceous bulky POSS segments on the side chains. The specific optical rotation [α]_D was ?66.7° (c 0.06, CHCl₃) for 2a and ?62.3° (c 0.06, CHCl₃) for 2b . The CD spectra showed that these two polymers had very similar and strong Cotton effects. Film polymer 2a showed almost the same PL spectrum as that in dilute CHCl₃ solution, indicating that bulky POSS units strongly suppressed intermolecular aggregation of the π‐conjugated polymer backbone. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6035–6040, 2008     

Intramolecular cyclization of 4,7‐bis(2‐bromo­acetyl)‐1‐thia‐4,7‐di­azacyclo­nonane

The reaction of 1‐thia‐4,7‐di­azacyclo­nonane with bromo­acetyl bromide in CHCl₃ affords the unexpected salt 4‐(2‐bromo­acetyl)‐8‐oxo‐1‐thionia‐4,7‐di­aza­bi­cyclo­[5.2.2]­un­decane bromide, C₁₀H₁₆BrN₂O₂S⁺·Br⁻. Two units of the salt are linked by S⋯Br contacts about a crystallographic inversion centre, thus forming dimers that are linked by Br⋯Br contacts into extended ribbons. S⋯O contacts between these ribbons generate a two‐dimensional sheet.     

Phenylene Ethynylene‐Tethered Perylene Bisimide Folda‐Dimer and Folda‐Trimer: Investigations on Folding Features in Ground and Excited States

In this work, we have elucidated in detail the folding properties of two perylene bisimide (PBI) foldamers composed of two and three PBI units, respectively, attached to a phenylene ethynylene backbone. The folding behaviors of these new PBI folda‐dimer and trimer have been studied by solvent‐dependent UV/Vis absorption and 1D and 2D NMR spectroscopy, revealing facile folding of both systems in tetrahydrofuran (THF). In CHCl₃ the dimer exists in extended (unfolded) conformation, whereas partially folded conformations are observed in the trimer. Temperature‐dependent ¹H NMR spectroscopic studies in [D₈]THF revealed intramolecular dynamic processes for both PBI foldamers due to, on the one hand, hindered rotation around C?N imide bonds and, on the other hand, backbone flapping; the latter process being energetically more demanding as it was observed only at elevated temperature. The structural features of folded conformations of the dimer and trimer have been elucidated by different 2D‐NMR spectroscopy (e.g., ROESY and DOSY) in [D₈]THF. The energetics of folding processes for the PBI dimer and trimer have been assessed by calculations applying various methods, particularly the semiempirical PM6‐DH2 and the more sophisticated B97D approach, in which relevant dispersion corrections are included. These calculations corroborate the results of NMR spectroscopic studies. Folding features in the excited states of these PBI foldamers have been characterized by using time‐resolved fluorescence and transient absorption spectroscopy in THF and CHCl₃, exhibiting similar solvent‐dependent behavior as observed for the ground state. Interestingly, photoinduced electron transfer (PET) process from electron‐donating backbone to electron‐deficient PBI core for extended, but not for folded, conformations was observed, which can be explained by a fast relaxation of excited PBI stacks in the folded conformation into fluorescent excimer states.     

Synthesis,Characterization, and Crystal Structure of Three Coordination Polymers from 5‐(Pyridin‐2‐ylmethyl)aminoisophthalic Acid

Three new complexes: [M(L)(H₂O)] [M = Zn ( 1 ), Co ( 2 ), Ni ( 3 ); H₂L = 5‐(pyridin‐2‐ylmethyl)aminoisophthalic acid] were synthesized under hydrothermal conditions at 180 °C and were characterized by elemental analysis, FT‐IR spectroscopy, single‐crystal X‐ray diffraction, and thermogravimetric analysis (TGA). The results of X‐ray diffraction analysis reveal that complexes 1 – 3 are isostructural and crystallize in the monoclinic system with space group P2₁/c. Each of the complexes displays a (3,3′)‐connected two‐dimensional (2D) wave‐like network with (4,8²) topology, within which five‐membered uncoplanar N,N‐chelated metallacycles are shaped. Delicate N–H ··· O and O–H ··· O hydrogen bonding interactions exist in complexes 1 – 3 . Adjacent 2D layers are linked by intermolecular interactions, resulting in the construction of extended metal‐organic frameworks (MOFs) in complexes 1 and 2 .     

Exceptionally high molecular weight linear polyethylene by using N,N,N′‐Co catalysts appended with a N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group

The bis(arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐NO₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group, have been synthesized by two successive condensation reactions from 2,6‐diacetylpyridine. Their subsequent treatment with anhydrous cobalt (II) chloride gave the corresponding N,N,N′‐CoCl₂ chelates, Co1 – Co5 , in excellent yield. All five complexes have been characterized by ¹H/¹⁹F NMR and IR spectroscopy as well as by elemental analysis. In addition, the molecular structures of Co1 and Co3 have been determined and help to emphasize the differences in steric properties imposed by the inequivalent N‐aryl groups; distorted square pyramidal geometries are adopted by each complex. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), precatalyts Co1 – Co5 collectively exhibited very high activities for ethylene polymerization with 2,6‐dimethyl‐substituted Co1 the most active (up to 1.1 × 10⁷ g (PE) mol^?1 (Co) h^?1); the MAO systems were generally more productive. Linear polyethylenes of exceptionally high molecular weight (M_w up to 1.3 × 10⁶ g mol^?1) were obtained in all cases with the range in dispersities exhibited using MAO as co‐catalyst noticeably narrower than with MMAO [M_w/M_n: 3.55–4.77 ( Co1 – Co5 /MAO) vs. 2.85–12.85 ( Co1 – Co5 /MMAO)]. Significantly, the molecular weights of the polymers generated using this class of cobalt catalyst are higher than any literature values reported to date using related N,N,N‐bis (arylimino)pyridine‐cobalt catalysts.     

Synthesis,DNA binding mode,singlet oxygen photogeneration and DNA photocleavage activity of ruthenium compounds with porphyrin–imidazo[4,5‐f]phenanthroline conjugated ligand

Using 1,10‐phenanothroline‐5,6‐dione and 10,20‐bis(4‐methylphenyl)porphyrin copper as starting materials, a conjugated porphyrin–imidazo[4,5‐f]‐1,10‐phenanothroline ligand (Por 1 ) was prepared. Subsequently, the copper complex of Por 1 was reacted with Ru(1,10‐phenanothroline)₂Cl₂ to yield ruthenium compound Por 2 . After removal of copper metal under acid condition, the free base porphyrin of Por 2 (Por 3 ) was prepared. The structure of these compounds was confirmed using UV–visible, ¹H NMR, mass and infrared spectroscopies and elemental analysis. Through UV–visible, fluorescence and circular dichroism analyses, the interaction modes between Por 1 – 3 and calf thymus DNA were investigated. Por 1 interacted with DNA via outside groove face, but Por 2 and Por 3 showed intercalative interaction with DNA. Binding constants between Por 1 – 3 and DNA were 7.79 × 10⁵, 1.29 × 10⁶ and 1.32 × 10⁶ M^?1, respectively. With 5,10,15,20‐tetraphenylporphyrin (H₂TPP) as a control, the singlet oxygen (¹O₂) generation of Por 1 – 3 was measured using the 1,3‐diphenylisobenzofuran method. The ¹O₂ generation rate of Por 1 – 3 followed the order: Por 3 >Por 1 >H₂TPPP >Por 2 . Por 1 and Por 3 showed better ¹O₂ quantum yields than Por 2 , which were almost threefold higher than that of H₂TPP. The DNA cleavage ability of Por 1 – 3 was analyzed using gel electrophoresis. Por 3 showed higher DNA photocleavage activity, with more than 50% photocleavage rate at 20 μM. These results suggest that amphipathic (hydrophilic/lipophilic) Por 3 with conjugated Por 1 ligand is a potential photosensitizer in cancer therapy.     

Hydrothermal Preparation,Crystal Structure and Properties of {[ZnTCPP(EtOH)][Zn(en)]2}n(EtOH)2n with a Novel Two‐Dimensional (2‐D) Motif

A novel zinc porphyrin, {[ZnTCPP(EtOH)][Zn(en)]₂}_n(EtOH)_2n ( 1 ) (TCPP=meso‐tetra(4‐carboxyphenyl)‐porphyrin; EtOH=ethanol; en=ethylenediamine) was obtained via a hydrothermal reaction and characterized by single‐crystal X‐ray diffraction. Complex 1 crystallizes in the space group C2/c of the monoclinic system with eight formula units in a cell: a=32.465(4) Å, b=10.527(3) Å, c=31.845(3) Å, β=95.524(6) °, V=10832(4) ų, C₅₈H₅₇N₈O₁₁Zn₃, M_r=1238.23, D_c=1.518 g/cm³, S=1.005, µ(Mo Kα) =1.388 mm^?1, F(000) =5112, R=0.0650 and wR=0.1574. Complex 1 features a novel 2‐D layered motif. The spectral data of UV‐vis, FT‐IR and fluorescence are reported.     

Supramolecular Polymerization of C3‐Symmetric Organogelators: Cooperativity,Solvent, and Gelation Relationship

A systematic study of the influence of solvent and the size of C₃‐symmetric discotics on their supramolecular polymerization mechanism is presented. The cooperativity of the self‐assembly of the reported compounds is directly related to their gelation ability. The two series of C₃‐symmetric discotics investigated herein are based on benzene‐1,3,5‐tricarboxamides (BTAs) and oligo(phenylene ethynylene)‐based tricarboxamides (OPE? TAs) that are peripherally decorated with achiral ( 1 a and 2 a ) or chiral N‐(2‐aminoethyl)‐3,4,5‐trialkoxybenzamide units ( 1 b and 2 b ). The supramolecular polymerization of compounds 1 a , b and 2 a , b has been exhaustively investigated in a number of solvents and by using various techniques: variable‐temperature circular dichroism (VT‐CD) spectroscopy, concentration‐dependent ¹H NMR spectroscopy, and isothermal titration calorimetry (ITC). The supramolecular polymerization mechanism of compounds 2 is highly cooperative in solvents such as methylcyclohexane and toluene and is isodesmic in CHCl₃. Unexpectedly, chiral compound 1 b is practically CD‐silent, in contrast with previously reported BTAs. ITC measurements in CHCl₃ demonstrated that the supramolecular polymerization of BTA 1 a is isodesmic. These results confirm the strong influence of the π‐surface of the central aromatic core of the studied discotic and the branched nature of the peripheral side chains on the supramolecular polymerization. The gelation ability of these organogelators is negated in CHCl₃, in which the supramolecular polymerization mechanism is isodesmic.     

Large Porphyrin Squares from the Self‐Assembly of meso‐Triazole‐Appended L‐Shaped meso–meso‐Linked ZnII–Triporphyrins: Synthesis and Efficient Energy Transfer

meso‐Triazolyl‐appended Zn^II–porphyrins were readily prepared by Cu^I‐catalyzed 1,3‐dipolar cycloaddition of benzyl azide to meso‐ethynylated Zn^II–porphyrin (click chemistry). In noncoordinating CHCl₃ solvent, spontaneous assembly occurred to form tetrameric array ( 3 )₂ from meso–meso‐linked diporphyrins 3 , and dodecameric porphyrin squares ( 4 )₄ and ( 5 )₄ from the L ‐shaped meso–meso‐linked triporphyrins 4 and 5 . The structures of these assemblies were examined by ¹H NMR spectra, absorption spectra, and their gel permeation chromatography (GPC) retention time. Furthermore, the structures of the dodecameric porphyrin squares ( 4 )₄ and ( 5 )₄ were probed by small‐ and wide‐angle X‐ray scattering (SAXS/WAXS) measurements in solution using a synchrotron source. Excitation‐energy migration processes in these assemblies were also investigated in detail by using both steady‐state and time‐resolved spectroscopic methods, which revealed efficient excited‐energy transfer (EET) between the meso–meso‐linked Zn^II–porphyrin units that occurred with time constants of 1.5 ps^?1 for ( 3 )₂ and 8.8 ps^?1 for ( 5 )₄.     

Synthesis,Crystal Structures,and Fungicidal Activity of Novel 1,5‐Diaryl‐3‐(glucopyranosyloxy)‐1H‐pyrazoles

Five novel pyrazole‐coupled glucosides, 1,5‐diaryl‐1H‐pyrazol‐3‐yl 2,3,4,6‐tetra‐O‐acetyl‐β‐D ‐glucopyranosides 5a – 5e , were synthesized by the phase‐transfer catalytic reaction of 1,5‐diaryl‐1H‐pyrazol‐3‐ols 4a – 4e with acetobromo‐α‐D ‐glucose in H₂O/CHCl₃ under alkaline conditions, using Bu₄N⁺Br^? as catalyst. Then, glucosides 5a – 5c were deacetylated in a solution of Na₂CO₃/MeOH to yield the 1,5‐diaryl‐3‐(β‐D ‐glucopyranosyloxy)‐1H‐pyrazoles 6a – 6c . Their structures were characterized by ¹H,¹H‐COSY, ¹H‐, ¹³C‐, and ¹⁹F‐NMR spectroscopy, as well as elemental analysis. The structures of 5d and 6c were also determined by single‐crystal X‐ray diffraction analysis. A preliminary in vitro bioassay indicated that compounds 4e and 5d exhibited excellent‐to‐medium fungicidal activity against Sclerotinia sclerotiorum at the dosage of 10 μg/ml.     

α‐Onocerin chloro­form hemisolvate

The triterpenoid natural product α‐onocerin [8,14‐secogammacera‐8(26),14(27)‐diene‐3,21‐diol], determined here as the chloro­form hemisolvate, C₃₀H₅₀O₂·0.5CHCl₃, consists of two independent symmetric trans‐decalin C₁₅ building blocks. Hydro­gen bonds between the hydroxyl groups form an infinite two‐dimensional network perpendicular to the c axis.     

Synthesis,structural characterization and cytotoxic activity of triorganotin 5‐(salicylideneamino)salicylates

Six new triorganotin complexes ( 1a – 1c and 2a – 2c ) of 5‐(salicylideneamino)salicylic acid, [5‐(3‐X‐2‐HOC₆H₃CH═N)‐2‐HOC₆H₃COO]SnR₃ (X = H, 1 ; CH₃O, 2 ; R = Ph, a ; Cy, b ; CH₂C(CH₃)₂Ph, c ), have been synthesized by one‐pot reaction of 5‐aminosalicylic acid, salicylaldehyde and triorganotin hydroxide and characterized using elemental analysis and infrared and NMR (¹H, ¹³C and ¹¹⁹Sn) spectra. The crystal structures of 1a , 1b , 2a ·CH₃OH, 2b ·CH₃OH and 2c ·CHCl₃ have been determined using single‐crystal X‐ray diffraction. In non‐coordinated solvent CDCl₃, the tin atoms in the complexes are all four‐coordinated. In the crystalline state, these compounds adopt a four‐ or five‐coordination mode. Complex 1a exhibits a 44‐membered macrocyclic tetrameric structure with trigonal bipyramidal geometry around the tin atoms in which the axial positions are occupied by the oxygen atom of carboxylate group of the ligand and the phenolic oxygen atom from the adjacent ligand. The coordination geometry of tin atom in 1b and 2c ·CHCl₃ is a distorted tetrahedron shaped by three carbon atoms of alkyl groups and a carboxylate oxygen atom of the ligand. In 2a ·CH₃OH and 2b ·CH₃OH, the tin atom has a distorted trans‐C₃SnO₂ trigonal bipyramidal geometry formed by three alkyl groups, a monodentate carboxylate group and a coordinated methanol molecule. The molecules of 2a ·CH₃OH and 2b ·CH₃OH are linked via O─H···O hydrogen bonds into a one‐dimensional supramolecular chain and a centrosymmetric R₄⁴(22) macrocycle, respectively. Bioassay results against two human tumor cell types (A549 and HeLa) show the complexes are efficient cytostatic agents and may be explored as potential antitumor drugs.     

Water Soluble Gold(I)‐diacetyl‐1,3,5‐triaza‐7‐phosphaadamantane‐arylazoimidazole Complexes: Synthesis and Spectroscopic Study

Reaction of [Au(DAPTA)(Cl)] with RaaiR’ in CH2Cl2 medium following ligand addition leads to [Au(DAPTA)(RaaiR’)](Cl) [DAPTA＝diacetyl-1,3,5-triaza-7-phosphaadamantane, RaaiR’＝p-R-C6H4-N＝N- C3H2-NN-1-R’, (1—3), abbreviated as N,N’-chelator, where N(imidazole) and N(azo) represent N and N’, respectively; R＝H (a), Me (b), Cl (c) and R’＝Me (1), CH2CH3 (2), CH2Ph (3)]. The 1H NMR spectral measurements in D2O suggest methylene, CH2, in RaaiEt gives a complex AB type multiplet while in RaaiCH2Ph it shows AB type quartets. 13C NMR spectrum in D2O suggest the molecular skeleton. The 1H-1H COSY spectrum in D2O as well as contour peaks in the 1H-13C HMQC spectrum in D2O assign the solution structure.     

Über Oxotantalate der Lanthanide des Formeltyps MTaO4 (M = La – Nd,Sm – Lu)

About Lanthanide Oxotantalates with the Formula MTaO₄ (M = La – Nd, Sm – Lu) Besides being a by‐product of solid state syntheses in tantalum ampoules the lanthanide(III) oxotantalates of the formula MTaO₄ can be easily prepared by sintering lanthanide sesquioxide M₂O₃ and tantalum(V) oxide Ta₂O₅ with sodium chloride as flux. Under these conditions two structure types emerge depending upon the M³⁺ cationic radius. For M = La – Pr the MTaO₄‐type tantalates crystallize in the space group P2₁/c with lattice constants of a = 762(±1), b = 553(±4), c = 777(±4) pm, β = 101(±1)° and four formula units per unit cell. With M = Nd, Sm – Lu, the monoclinic cell dimensions (space group P2/c) shrink to the lattice constants like a = 516(±9), b = 551(±9), c = 534(±9) pm, β = 96.5(±0.3)° and there are only two formula units present. Both structures show a coordination sphere of eight oxygen atoms for the lanthanide trications shaped as distorted square antiprism for the structure with the larger lanthanides (in the following referred to as A‐type) and as trigonal dodecahedron for the structure with the smaller ones (called as B‐type in the following). The coordination environment about the Ta⁵⁺ cations can be described as a slightly distorted octahedron (CN = 6) for the A‐type structure of MTaO₄ and a heavily distorted one (CN = 6) for the B‐type. The difference between the two types results from the interconnection of these [TaO₆]^7? octahedra. Whereas they are connected via four vertices to form corrugated layers according to parallel the bc‐plane in the A‐type, the octahedra of the B‐type MTaO₄ structure share edges to built up zig‐zag chains along the c axis.     

Toward Ultralow‐Bandgap Liquid Crystalline Semiconductors: Use of Triply Fused Metalloporphyrin Trimer–Pentamer as Extra‐large π‐Extended Mesogenic Motifs

In contrast with their dimeric homologue, triply fused zinc porphyrin trimer–pentamer, as extra‐large π‐extended mesogens, assemble into columnar liquid crystals (LCs) when combined with 3,4,5‐tri(dodecyloxy)phenyl side groups ( 3 P_Zn – 5 P_Zn , Figure 1 ). Their LC mesophases develop over a wide temperature range, namely, 41–280 °C (on heating) for 5 P_Zn , and all adopt an oblique columnar geometry, typically seen in columnar LC materials involving strong mesogenic interactions. These LC materials are characterized by their wide light‐absorption windows from the entire visible region up to a near infrared (NIR) region. Such ultralow‐bandgap LC materials are chemically stable and serve as hole transporters, in which 5 P_Zn gives the largest charge carrier mobility (2.4×10^?2 cm V^?1 s^?1) among the series. Despite a big dimensional difference, they coassemble without phase separation, in which the resultant LC materials display essentially no deterioration of the intrinsic conducting properties.