Heterogeneous Electrofreezing of Super-Cooled Water on Surfaces of Pyroelectric Crystals is Triggered by Trigonal Planar Ions

Electrofreezing experiments of super-cooled water (SCW) with different ions, performed directly on the charged hemihedral faces of pyroelectric LiTaO₃ and AgI crystals, in the presence and in the absence of pyroelectric charge are reported. It is demonstrated that bicarbonate (HCO₃⁻) ions elevate the icing temperature near the positively charged faces. In contrast, the hydronium (H₃O⁺) slightly reduces the icing temperature. Molecular dynamics simulations suggest that the hydrated trigonal planar HCO₃⁻ ions self-assemble with water molecules near the surface of the AgI crystal as clusters of slightly different configuration from those of the ice-like hexagons. These clusters, however, have a tendency to serve as embryonic nuclei for ice crystallization. Consequently, we predicted and experimentally confirmed that the trigonal planar ions of NO₃⁻ and guanidinium (Gdm⁺), at appropriate concentrations, elevate the icing temperature near the positive and negative charged surfaces, respectively. On the other hand, the Cl⁻ and SO₄²⁻ ions of different configurations reduce the icing temperature.     

Heterogeneous Electrofreezing Triggered by CO2 on Pyroelectric Crystals: Qualitatively Different Icing on Hydrophilic and Hydrophobic Surfaces

By performing icing experiments on hydrophilic and hydrophobic surfaces of pyroelectric amino acids and on the x‐cut faces of LiTaO₃, we discovered that the effect of electrofreezing of super cooled water is triggered by ions of carbonic acid. During the cooling of the hydrophilic pyroelectric crystals, a continuous water layer is created between the charged hemihedral faces, as confirmed by impedance measurements. As a result, a current of carbonic acid ions, produced by dissolved environmental CO₂, flows through the wetted layer towards the hemihedral faces and elevates the icing temperature. This proposed mechanism is based on the following: (i) on hydrophilic surfaces, water with dissolved CO₂ (pH 4) freezes at higher temperatures than pure water of pH 7. (ii) In the absence of the ionic current, achieved by linking the two hemihedral faces of hydrophilic crystals by a conductive paint, water of the two pH levels freeze at the same temperature. (iii) On hydrophobic crystals with similar pyroelectric coefficients, where there is no continuous wetted layer, no electrofreezing effect is observed.     

The Contribution of Pyroelectricity of AgI Crystals to Ice Nucleation

The pyroelectricity of AgI crystals strongly affects the icing temperature of super‐cooled water, as disentangled from that of epitaxy. This deduction was achieved by the design of polar crystalline ceramic pellets of AgI, with experimentally determined sense of polarity. These pellets are suitable for measuring both their pyroelectric properties as well as the icing temperature of super‐cooled water, separately on each of the expressed Ag⁺ and I^? hemihedral surfaces. The positive pyroelectric charge at the silver‐enriched side elevates the icing temperature, whereas the negative charge at the iodide side decreases that temperature. Moreover, the effect of pyroelectric charge remains dominant despite the presence of contaminants on both the silver and the iodide‐enriched surfaces. Consequently an electrochemical process for ice nucleation is suggested, which might be of relevance for understanding the role played by electric charges in heterogeneous icing processes in general.     

Solvent‐Induced Crystal Polymorphism as Studied by Pyroelectric Measurements and Impedance Spectroscopy: Alcohols as Tailor‐Made Inhibitors of α‐Glycine

Metastable polymorphs commonly emerge when the formation of the stable analogues is inhibited by using different solvents or auxiliaries. Herein, we report that when glycine is grown in aqueous solutions in the presence of low concentrations of different co‐solvents, only alcohols and acetone, unlike water and acetic acid, are selectively incorporated in minute amounts within the bulk of the α‐polymorph. These findings demonstrate that although water binds more strongly to the growing face of the crystal, alcohols and acetone are exclusively incorporated, and thus serve as efficient inhibitors of this polymorph, leading to the precipitation of the β‐form. These solvents then create polar domains detectable by pyroelectric measurements and impedance spectroscopy. These results suggest that in the control of crystal polymorphism with co‐solvents, one should consider also the different desolvation rates in addition to the energy of binding to the growing faces of the crystal.     

Elucidation of Metal‐Ion Accumulation Induced by Hydrogen Bonds on Protein Surfaces by Using Porous Lysozyme Crystals Containing RhIII Ions as the Model Surfaces

Metal‐ion accumulation on protein surfaces is a crucial step in the initiation of small‐metal clusters and the formation of inorganic materials in nature. This event is expected to control the nucleation, growth, and position of the materials. There remain many unknowns, as to how proteins affect the initial process at the atomic level, although multistep assembly processes of the materials formation by both native and model systems have been clarified at the macroscopic level. Herein the cooperative effects of amino acids and hydrogen bonds promoting metal accumulation reactions are clarified by using porous hen egg white lysozyme (HEWL) crystals containing Rh^III ions, as model protein surfaces for the reactions. The experimental results reveal noteworthy implications for initiation of metal accumulation, which involve highly cooperative dynamics of amino acids and hydrogen bonds: i) Disruption of hydrogen bonds can induce conformational changes of amino‐acid residues to capture Rh^III ions. ii) Water molecules pre‐organized by hydrogen bonds can stabilize Rh^III coordination as aqua ligands. iii) Water molecules participating in hydrogen bonds with amino‐acid residues can be replaced by Rh^III ions to form polynuclear structures with the residues. iv) Rh^III aqua complexes are retained on amino‐acid residues through stabilizing hydrogen bonds even at low pH (≈2). These metal–protein interactions including hydrogen bonds may promote native metal accumulation reactions and also may be useful in the preparation of new inorganic materials that incorporate proteins.     

Anomalous Freezing of Nano‐Confined Water in Room‐Temperature Ionic Liquid 1‐Butyl‐3‐Methylimidazolium Nitrate

Non‐crystal formation of ice is investigated by simultaneous X‐ray diffraction and differential scanning calorimetry measurements upon cooling to ?100 °C. At room temperature, size‐tunable water confinement (≈20 Å size) in a room‐temperature ionic liquid (RTIL, 1‐butyl‐3‐methylimidazolium nitrate, [C₄mim][NO₃]) exists in a water‐rich region (70–90 mol % D₂O). The confined water (water pocket) is characterized by almost monodispersive size distribution. In [C₄mim][NO₃]‐x mol % D₂O (70<x<94), the absence of sharp Bragg reflections and a distinct exothermal peak indicate that crystallization/cold crystallization both of [C₄mim][NO₃] and D₂O is suppressed, even upon slow cooling and heating.     

Molecular Logic Gates and Switches Based on 1,3,4‐Oxadiazoles Triggered by Metal Ions

Organic molecular devices for information processing applications are highly useful building blocks for constructing molecular‐level machines. The development of “intelligent” molecules capable of performing logic operations would enable molecular‐level devices and machines to be created. We designed a series of 2,5‐diaryl‐1,3,4‐oxadiazoles bearing a 2‐(para‐substituted)phenyl and a 5‐(o‐pyridyl) group (substituent X=NMe₂, OEt, Me, H, and Cl; 1 a – e ) that form a bidentate chelating environment for metal ions. These compounds showed fluorescence response profiles varying in both emission intensity and wavelength toward the tested metal ions Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺ and the responses were dependent on the substituent X, with those of 1 d being the most substantial. The 1,3,4‐oxadiazole O or N atom and pyridine N atom were identified as metal‐chelating sites. The fluorescence responses of 1 d upon metal chelation were employed for developing truth tables for OR, NOR, INHIBIT, and EnNOR logic gates as well as “ON‐OFF‐ON” and “OFF‐ON‐OFF” fluorescent switches in a single 1,3,4‐oxadiazole molecular system.     

Light‐Induced Bending of Needle‐Like Crystals of Naphthylvinylbenzoxazole Triggered by trans–cis Isomerization

New diarylethene derivatives containing benzoxazole ( NBO ) and benzothiazole ( NBT ) have been synthesized. Light‐induced trans–cis isomerization of NBO and NBT took place in crystals, and only induced the needle‐like crystals of NBO to bend backwards away from the UV light source. The movement of the atoms was deemed to take place during the isomerization of NBO ; hence, strain would be produced and accumulated rapidly in the surface of crystals exposed to UV light. The uniform release of strain led to the bending of needle‐like crystals. The light‐induced trans–cis isomerization efficiency of NBT was too low to drive the motion of crystals, which might have originated from the large repulsion between naphthyl and benzothiazole. These results provide a new platform for the transformation of light energy into mechanical energy in molecular crystals through the unimolecular photochemical reaction of diarylethene derivatives.     

Direct Observation of the Distribution of Gelatin in Calcium Carbonate Crystals by Super‐Resolution Fluorescence Microscopy

Biological organic–inorganic hybrid materials often achieve excellent properties and provide inspiration for the design of advanced materials. The organic phase plays a key role in determining the properties of biogenic materials, and the spatial arrangement of organic and inorganic phases provides direct evidence for interaction between the two phases. Super‐resolution fluorescence microscopy was used to visualize the gelatin distribution in two different crystalline polymorphs of calcium carbonate (vaterite and calcite) and to investigate the process by which gelatin is excluded from the crystals. The results demonstrated that gelatin is distributed through vaterite microspheres in the form of nanoparticles, whereas it tends to accumulate on the edges of the calcite rhombohedra.     

Raman and FTIR Spectroscopic Studies of 1‐Ethyl‐3‐methylimidazolium Trifluoromethylsulfonate,its Mixtures with Water and the Solvation of Zinc Ions

In this paper we report on the interactions of the ionic liquid 1‐ethyl‐3‐methylimidazolium trifluoromethylsulfonate ([EMIm]TfO) with water and the solvation of zinc ions in neat [EMIm]TfO and [EMIm]TfO–water mixtures investigated by FTIR and Raman spectroscopy. The structures and physicochemical properties of the [EMIm]TfO–water mixtures are strongly dependent on the interaction between cations, anions, and water. The structure was changed from ionic‐liquid‐like to water‐like solutions upon addition of water. In addition, zinc salts can precipitate in 0.2 M Zn(TfO)₂/[EMIm]TfO upon addition of 10 % (v/v) water, presumably as a result of polarity change of the solution. The average coordination number of TfO^? per zinc ion calculated from Raman spectra is 3.8 in neat [EMIm]TfO, indicating that [Zn(TfO)₄]^2?, and [Zn(TfO)₃]^? complexes are present in the solution. However, in the presence of water, water interacts preferentially with the zinc ions, leading to aqueous zinc species. The solvation of zinc ions in 1‐butyl‐1‐methylpyrrolidinium trifluoromethylsulfonate ([Py_1,4]TfO) was also investigated. In [Py_1,4]TfO, there are, on average, 4.5 TfO^? anions coordinating each zinc ion, corresponding to the weak interaction between [Py_1,4]⁺ cations and TfO^? anions. The species present in [Py_1,4]TfO are likely a mixture of [Zn(TfO)₄]^2? and [Zn(TfO)₅]^3?.     

Self‐assembly of a Sequence‐shuffled Short Peptide Amphiphile Triggered by Metal Ions into Terraced Nanodome‐like Structures

We highlight the structural diversity of strategically designed two short peptide amphiphiles (sPAs) and describe their structure–function relationship studies. The shuffling of two key amino acids, that is, tyrosine and phenylalanine, in a designed sPA lead to a pair of constitutional isomers. Such small and strategic alteration can bring a substantial change in the self‐assembling pattern. Inspired from the naturally occurring metallopeptides, bioactive transition‐metal ions were used for constructing the unusual nanostructures. Use of appropriate metal ions created bigger differences between the properties of these isomers and hence the self‐assembly. Coordination of appropriate transition metal ions modifies the internal nanoscale structures of sPA, thus leading to the formation of vertically stacked terraced layers with decreasing size, which possess a high degree of dimensional regularity. We propose that such metal‐induced terraced nanodome‐like hierarchical self‐assembly may have relevance for specific biotechnology applications.     

CO2‐Triggered Switchable Hydrophilicity of a Heterogeneous Conjugated Polymer Photocatalyst for Enhanced Catalytic Activity in Water

Water compatibility for heterogeneous photocatalysts has been pursued for energy and environmental applications. However, there exists a trade‐off between hydrophilicity and recyclability of the photocatalyst. Herein, we report a conjugated polymer photocatalyst with tertiary amine terminals that reversibly binds CO₂ in water, thereby generating switchable hydrophilicity. The CO₂‐assisted hydrophilicity boosted the photocatalytic efficiency in aqueous medium with minimum dosage. When CO₂ was desorbed, the photocatalyst could be simply regenerated from reaction media, facilitating the repeated use of photocatalyst. Hydrophilicity/hydrophobicity control of the polymer photocatalyst was successfully showcased through a variety of organic photoredox reactions under visible‐light irradiation in water.     

l‐Arginine‐Triggered Self‐Assembly of CeO2 Nanosheaths on Palladium Nanoparticles in Water

Pd@CeO₂ core–shell nanostructures with a tunable Pd core size, shape, and nanostructure as well as a tunable CeO₂ sheath thickness were obtained by a biomolecule‐assisted method. The synthetic process is simple and green, as it involves only the heating of a mixture of Ce(NO₃)₃, l ‐arginine, and preformed Pd seeds in water without additives. Importantly, the synthesis is free of thiol groups and halide ions, thus providing a possible solution to the problem of secondary pollution by Pd nanoparticles in the sheath‐coating process. The Pd/CeO₂ nanostructures can be composited well with γ‐Al₂O₃ to create a heterogeneous catalyst. In subsequent tests of catalytic NO reduction by CO, Pd@CeO₂/Al₂O₃ samples based on Pd cubes (6, 10, and 18 nm), Pd octahedra (6 nm), and Pd cuboctahedra (9 nm) as well as a simply loaded Pd cube (6 nm)–CeO₂/Al₂O₃ sample were used as catalysts to investigate the effects of the Pd core size and shape and the hybrid nanostructure on the catalytic performance.     

Remote Control of the Planar Chirality in Peptide‐Bound Metallomacrocycles and Dynamic‐to‐Static Planar Chirality Control Triggered by Solvent‐Induced 310‐to‐α‐Helix Transitions

The dynamic planar chirality in a peptide‐bound Ni^II‐salphen‐based macrocycle can be remotely controlled. First, a right‐handed (P)‐3₁₀‐helix is induced in the dynamic helical oligopeptides by a chiral amino acid residue far from the macrocyclic framework. The induced planar chirality remains dynamic in chloroform and acetonitrile, but is almost completely locked in fluoroalcohols as a result of the solvent‐induced transition of the peptide chains from a 3₁₀‐helix to a wider α‐helix, which freezes the rotation of the pendant peptide units around the macrocycle.     

Four‐Shell Polyoxometalates Featuring High‐Nuclearity Ln26 Clusters: Structural Transformations of Nanoclusters into Frameworks Triggered by Transition‐Metal Ions

A series of polyoxometalates (POMs) that incorporate the highest‐nuclearity Ln clusters that have been observed in such structures to date (Ln₂₆ , Ln=La and Ce) are described, which exhibit giant multishell configurations (Ln⊂W₆⊂Ln₂₆⊂W₁₀₀). Their structures are remarkably different from known giant POMs that feature multiple Ln ions. In particular, the incorporated Ln–O clusters with a nuclearity of 26 are significantly larger than known high‐nuclearity (≤10) Ln–O clusters in POM chemistry. Furthermore, they also contain the largest number of La and Ce centers for any POM reported to date and represent a new kind of rare giant POMs with more than 100 W atoms. Interestingly, the La₂₆‐containing POM can undergo a single‐crystal to single‐crystal structural transformation in the presence of various transition‐metal ions, such as Cu²⁺, Co²⁺, and Ni²⁺, from an inorganic molecular nanocluster into an inorganic–organic hybrid extended framework that is built from POM building blocks with even higher‐nuclearity La₂₈ clusters bridged by transition‐metal complexes.     

Spectroscopic Evidence for Clusters of Like‐Charged Ions in Ionic Liquids Stabilized by Cooperative Hydrogen Bonding

Direct spectroscopic evidence for hydrogen‐bonded clusters of like‐charged ions is reported for ionic liquids. The measured infrared O?H vibrational bands of the hydroxyethyl groups in the cations can be assigned to the dispersion‐corrected DFT calculated frequencies of linear and cyclic clusters. Compensating the like‐charge Coulomb repulsion, these cationic clusters can range up to cyclic tetramers resembling molecular clusters of water and alcohols. These ionic clusters are mainly present at low temperature and show strong cooperative effects in hydrogen bonding. DFT‐D3 calculations of the pure multiply charged clusters suggest that the attractive hydrogen bonds can compete with repulsive Coulomb forces.