Tunable Pentapeptide Self‐Assembled β‐Sheet Hydrogels

Oligopeptide‐based supramolecular hydrogels hold promise in a range of applications. The gelation of these systems is hard to control, with minor alterations in the peptide sequence significantly influencing the self‐assembly process. We explored three pentapeptide sequences with different charge distributions and discovered that they formed robust, pH‐responsive hydrogels. By altering the concentration and charge distribution of the peptide sequence, the stiffness of the hydrogels could be tuned across two orders of magnitude (2–200 kPa). Also, through reassembly of the β‐sheet interactions the hydrogels could self‐heal and they demonstrated shear‐thin behavior. Using spectroscopic and cryo‐imaging techniques, we investigated the relationship between peptide sequence and molecular structure, and how these influence the mechanical properties of the hydrogel. These pentapeptide hydrogels with tunable morphology and mechanical properties have promise in tissue engineering, injectable delivery vectors, and 3D printing applications.     

A novel method to prepare temperature/pH‐sensitive poly(N,N‐diethylacrylamide‐co‐acrylic acid) hydrogels with rapid swelling/deswelling behaviors

Fast responsive temperature‐ and pH‐sensitive hydrogels of poly(N,N‐diethylacrylamide‐co‐acrylic acid) (P(DEA‐co‐AA)) have been synthesized successfully by a two‐step procedure, in which the initial polymerization was conducted at constant temperature for 15 min, followed by further polymerization at ?30°C for 12 hr. Swelling studies showed that hydrogels thus prepared had almost the same temperature and pH sensitivity compared with the conventional ones (polymerized at 24°C for 12 hr). However, hydrogels thus prepared had faster swelling/deswelling rates in distilled water than the conventional ones, and their deswelling rates in low pH buffer solutions were also faster than the conventional ones. These improved properties were attributed to the porous network structure, which was confirmed by the results of scanning electron microscopy. Copyright © 2009 John Wiley & Sons, Ltd.     

Tuneable Transient Thermogels Mediated by a pH‐ and Redox‐Regulated Supramolecular Polymerization

A multistimuli‐responsive transient supramolecular polymerization of β‐sheet‐encoded dendritic peptide monomers in water is presented. The amphiphiles, which contain glutamic acid and methionine, undergo a glucose oxidase catalyzed, glucose‐fueled transient hydrogelation in response to an interplay of pH and oxidation stimuli, promoted by the production of reactive oxygen species (ROS). Adjusting the enzyme and glucose concentration allows tuning of the assembly and the disassembly rates of the supramolecular polymers, which dictate the stiffness and transient stability of the hydrogels. The incorporation of triethylene glycol chains introduces thermoresponsive properties to the materials. We further show that repair enzymes are able to reverse the oxidative damage in the methionine‐based thioether side chains. Since ROS play an important role in signal transduction cascades, our strategy offers great potential for applications of these dynamic biomaterials in redox microenvironments.     

Synthesis of hydrophilic microspheres with LCST close to body temperature for controlled dual‐sensitive drug release

Novel stimuli‐responsive hydrophilic microspheres were prepared by free radical polymerization of hydroxyethyl methacrylate (HEMA) and methacrylic acid (MA), as hydrophilic monomers, and N‐isopropylacrylamide (NIPAAm) and N,N′‐ethylenebisacrylamide (EBA), as thermo‐sensitive monomer and crosslinker, respectively. Hydrophilic comonomers were introduced in the macromolecular network to synthesize materials with tunable thermal behavior. In addition, by introducing in the polymerization feed both a hydrophilic and a pH‐sensitive monomer, such as MA, dual stimuli‐responsive (pH and temperature) hydrogels were synthesized. The incorporation of monomers in the network was confirmed by infrared spectroscopy, while the network density and the shape of hydrogels was found to strictly depend on the concentration of monomers in the polymerization feed. Thermal analyses showed negative thermo‐responsive behavior with pronounced water affinity of microspheres at a temperature lower than lower critical solution temperature (LCST). In our experiment, the LCST values of the hydrogels were in the range 34.6–37.5°C, close to the body temperature, and the amount of hydrophilic moieties in the polymeric network allows to collect shrinking/swelling transition temperatures higher than the LCST of NIPAAm homopolymers. In order to test the preformed materials as drug carriers, diclofenac diethylammonium salt (DDA) was chosen and drug entrapment percent was determined. Drug release profiles, in media at different temperature and pH, depend on hydrogels crosslinking degree and drug–bead interactions. By using semi‐empirical equations, the release mechanism was extensively studied and the diffusional contribute was evaluated. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of temperature‐ and pH‐sensitive hydrogels based on poly(2‐ethyl‐2‐oxazoline) and poly(D,L‐lactide)

A novel series of temperature‐ and pH‐sensitive hydrogels based on poly(2‐ethyl‐2‐oxazoline) and three‐arm poly(D,L ‐lactide) were synthesized via photocopolymerization. For the creation of polymeric networks, two types of macromers terminated with methacrylate groups were prepared: poly(2‐ethyl‐2‐oxazoline) dimethacrylate and three‐arm poly(D,L ‐lactide) trimethacrylate. The chemical structures were analyzed with ¹H NMR and Fourier transform infrared techniques. The thermal behaviors, morphologies, and swelling properties were measured for the characterization of the polymeric networks. All the poly(2‐ethyl‐2‐oxazoline)/three‐arm poly(D,L ‐lactide)hydrogels provided high water retention capacity and exhibited reversible swelling–shrinking behavior in response to temperature and pH variations. The hydrogels with higher poly(2‐ethyl‐2‐oxazoline) dimethacrylate contents were more effective in raising the swelling ratio and temperature and pH sensitivity. However, higher contents of three‐arm poly(D,L ‐lactide) trimethacrylate produced larger particles and pore sizes in the hydrogels. This study effectively proves that this unique combination of water swellability and biodegradability provides hydrogels with a much wider range of applications in biomedical fields. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1112–1121, 2002     

Stimuli‐Responsive Biomolecule‐Based Hydrogels and Their Applications

This Review presents polysaccharides, oligosaccharides, nucleic acids, peptides, and proteins as functional stimuli‐responsive polymer scaffolds that yield hydrogels with controlled stiffness. Different physical or chemical triggers can be used to structurally reconfigure the crosslinking units and control the stiffness of the hydrogels. The integration of stimuli‐responsive supramolecular complexes and stimuli‐responsive biomolecular units as crosslinkers leads to hybrid hydrogels undergoing reversible triggered transitions across different stiffness states. Different applications of stimuli‐responsive biomolecule‐based hydrogels are discussed. The assembly of stimuli‐responsive biomolecule‐based hydrogel films on surfaces and their applications are discussed. The coating of drug‐loaded nanoparticles with stimuli‐responsive hydrogels for controlled drug release is also presented.     

Biomimetic chitosan‐treated clay–elastomer composites with water‐responsive mechanically dynamic properties

Biomimetic hydrophobic polymer composites with water‐responsive mechanically adaptive behaviors were successfully prepared using hydrophilic chitosan‐treated clay (chi‐clay) as the water‐activated, pH‐sensitive and reinforcing phase and elastomeric thermoplastic polyurethane (TPU) as the matrix. Structural characterization, swelling tests in three representative solutions with different pH values, and dynamic mechanical analysis under wet and dry conditions were performed on the resultant chi‐clay‐TPU composites with varying chi‐clay contents. The results showed that the equilibrium swelling degree of TPU increased significantly with increasing chi‐clay content and that water transportation in all the composites followed Fickian diffusion mechanism. The presence of chi‐clay provided remarkable enhancement of the storage modulus of TPU and offered water‐responsive changes of the modulus. Such changes increased with chi‐clay content and were pH‐sensitive, with the acidic condition rendering the largest modulus difference. These water‐responsive polymer composites may find potential applications in biomedical fields and beyond. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 55–62     

Synthesis and characterization of poly(ethylene glycol)‐based thermo‐responsive polyurethane hydrogels for controlled drug release

The thermo‐responsiveness, swelling and mechanical properties of a series of novel poly(ester‐ether urethane) hydrogels have been investigated. These thermo‐sensitive hydrogels were obtained by combining hydrophobic biodegradable poly(ε‐caprolactone) diols and hydrophilic two‐, three‐ and four‐arm hydroxyl terminated poly(ethylene glycol) (PEG) of various molecular weights, using hexamethylene diisocyanate, dichloroethane as solvent and a tin‐based catalyst. The use of multifunctional PEGs leads to the formation of covalent crosslinking points allowing an additional control of the swelling capability. Thus, it was found that tuning the hydrophilic/hydrophobic balance and the crosslinking degree by changing the composition, the swelling and the thermo‐responsive behavior of these hydrogels could be modulated. The obtained hydrogels showed a volume transition at around room temperature. Therefore, and taking into account their biocompatibility, these hydrogels show promising properties for biomedical applications, such as drug delivery. Thus, the loading and release of diltiazem hydrochloride, an antihypertensive drug used as model, were investigated. These new PEG polyurethane hydrogels were able to incorporate a high amount of drug providing a sustained release after an initial burst effect. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermo‐ and pH‐induced phase transitions and network parameters of poly(N‐isopropylacrylamide‐ co‐2‐acrylamido‐2‐methyl‐propanosulfonic acid) hydrogels

Dual temperature‐ and pH‐sensitive hydrogels composed of N‐isopropylacrylamide (NIPAM) and 2‐acrylamido‐2‐methyl‐propanosulfonic acid (AMPS) were prepared by free‐radical crosslinking copolymerization in aqueous solution at 22 °C. The mole percent of AMPS in the comonomer feed was varied between 0.0 and 7.5, while the crosslinker ratio was fixed at 5.0/100. The effect of AMPS content on thermo‐ and pH‐ induced phase transitions as well as equilibrium swelling/deswelling, interior morphology and network structure was investigated. The volume phase transition temperature (VPT‐T) was determined by both swelling/deswelling measurements and differential scanning calorimetry (DSC) technique. In addition, the volume phase transition pH (VPT‐pH) was detected from the derivative of the curves of the swelling ratio (dQ_v/dpH) versus pH. The polymer‐solvent interaction parameter (χ) and the average molecular mass between crosslinks ( ) of hydrogels were calculated from swelling ratios in buffer solutions at various pHs. The enthalpy (ΔH) and entropy (ΔS) changes appearing in the χ parameter of hydrogels were also determined by using the modified Flory–Rehner equation. The negative values for ΔH and ΔS indicated that the hydrogels had a negative temperature‐sensitive property in water, that is, swelling at a lower temperature and shrinking at a higher temperature. It was observed that the experimental swelling data of hydrogels at different temperature agreed with the modified Flory‐Rehner approach based on the affine network model. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1713–1724, 2008     

Modified chitosan III,superabsorbency, salt‐ and pH‐sensitivity of smart ampholytic hydrogels from chitosan‐g‐PAN

Polyacrylonitrile (PAN) grafted chitosan was prepared by ceric‐initiated graft polymerization of acrylonitrile onto chitosan in a homogenous medium. The copolymer chitosan‐g‐PAN product was then hydrolyzed to yield a novel smart hydrogel (H‐chitoPAN) with superabsorbing properties. The influence of add‐on values as well as temperature and time of hydrolysis of the initial chitosan‐g‐PAN on swelling behavior of the hydrogel was evaluated in water and various salt solutions. The swelling kinetics of the superabsorbing hydrogel was studied as well. The hydrogels exhibited ampholytic and pH‐sensitivity characteristics. Several sharp swelling changes were observed in lieu of pH variations in a wide range (pH 2–13). The swelling variations were explained according to swelling theory based on the hydrogel chemical structure. Superabsorbency, pH‐ and salt‐sensitivity of the chitosan‐based hydrogel was briefly compared with the classical starch‐based superabsorbent, H‐SPAN. The pH‐reversibility and on–off switching behavior of the intelligent H‐chitoPAN hydrogels makes them good candidates for considering as potential drug carries. Copyright © 2004 John Wiley & Sons, Ltd.     

Biodegradable thermo‐ and pH‐responsive hydrogels for oral drug delivery

In this article, novel smart hydrogels based on biodegradable pH sensitive poly(L ‐glutamic acid‐g‐2‐hydroxylethyl methacrylate) (PGH) chains and temperature‐sensitive hydroxypropylcellulose‐g‐acrylic acid (HPC‐g‐AA) segments were designed and synthesized. The influence of pH and temperature on the equilibrium swelling ratios of the hydrogels was discussed. The optical transmittance of the hydrogels was also changed as a function of temperature, which reflecting that the HPC‐g‐AA part of the hydrogels became hydrophobic at the temperature above the lower critical solution temperature (LCST). At the same time, the LCST of the hydrogels had a visible pH‐dependent behavior. Scanning electron microscopic analysis revealed the morphology of the hydrogels before and after enzymatic degradation. The biodegradation rate of the hydrogels was directly related to the PGH content and the pH value. The in vitro release of bovine serum albumin from the hydrogels were investigated. The release profiles indicated that both the HPC‐g‐AA and PGH contents played important roles in the drug release behaviors. These results show that the smart hydrogels seem to be of great promise in pH–temperature oral drug delivery systems. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Drug‐Loaded Elastin‐Like Polypeptide–Collagen Hydrogels with High Modulus for Bone Tissue Engineering

Emphasizing the role of hydrogel stiffness and cellular differentiation, this study develops collagen and elastin‐like polypeptide (ELP)–based bone regenerative hydrogels loaded with recombinant human bone morphogenetic protein‐2 (rhBMP‐2) and doxycycline with mechanical properties suitable for osteogenesis. The drug‐incorporated collagen–ELP hydrogels has significantly higher modulus of 35 ± 5 kPa compared to collagen‐only hydrogels. Doxycycline shows a bi‐phasic release with an initial burst release followed by a gradual release, while rhBMP‐2 exhibits a nearly linear release profile for all hydrogels. The released doxycycline shows anti‐microbial activity against Pseudomonas aeruginosa, Streptococcus sanguinis, and Escherichia coli. Microscopic observation of the hydrogels reveals their interconnected, macroporous, 3D open architecture with pore diameters between 160 and 400 µm. This architecture supports human adipose–derived stem cell attachment and proliferation from initial days of cell seeding, forming a thick cellular sheath by day 21. Interestingly, in collagen and collagen–ELP hydrogels, cell morphology is elongated with stretched slender lamellipodial formation, while cells assemble as spheroidal aggregates in crosslinked as well as drug‐loaded hydrogels. Osteogenic markers, alkaline phosphatase and osteocalcin, are expressed maximally for drug‐loaded hydrogels compared to those without drugs. The drug‐loaded collagen–ELP hydrogels are thus promising for combating bacterial infection and promoting guided bone regeneration.     

pH‐responsive ionic poly(N,N‐diethylaminoethyl methacrylate‐co‐N‐vinyl‐2‐pyrrolidone) hydrogels: Synthesis and swelling properties

A series of an ionic hydrogels composed of N,N‐diethylaminoethyl methacrylamide (DEAEMA), N‐vinyl‐2‐pyrrolidone (VP), and itaconic acid were synthesized by free‐radical cross‐linking copolymerization in water–ethanol mixture by using N,N‐methylenebis(acrylamide) as the cross‐linker, ammonium persulfate as the initiator, and N,N,N′,N′‐tetramethylenediamine as the activator. The swelling behaviors of these hydrogels were analyzed in buffer solutions at various pH. It was observed that the swelling behavior of cross‐linked ionic poly(N,N‐diethylaminoethyl methacrylamide‐co‐N‐vinyl‐2‐pyrrolidone) [P(DEAEMA/VP)] hydrogels at different pH agreed with the modified Flory–Rehner equation based on the affine network model and the ideal Donnan theory. The swelling process in buffer solutions at various pH was found to be Fickian‐type diffusion. The pH‐reversibility and on–off switching properties of the P(DEAEMA/VP) hydrogels may be considered as good candidate to design novel drug‐delivery system. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2819–2828, 2005     

A pH‐sensitive water‐soluble N‐carboxyethyl chitosan/poly(hydroxyethyl methacrylate) hydrogel as a potential drug sustained release matrix prepared by photopolymerization technique

Biocompatible pH‐sensitive semi‐interpenetration polymeric network hydrogels (semi‐IPN) based on water‐soluble N‐carboxyethyl chitosan (CECS) and 2‐hydroxyethyl methacrylate (HEMA) were synthesized by the photopolymerization technique. pH‐sensitivity, cytotoxicity, morphology, mechanical property, and water state of hydrogel were investigated by a swelling test, methylthiazolydiphenyl‐tetrazolium bromide (MTT) assay, scanning electron microscopy (SEM), universal testing machine, and differential scanning calorimetry (DSC), respectively. The drug release studies were carried out using 5‐Flurouracil as the model drug. The results indicated that the hydrogels were sensitive to pH of the medium and its wet state had good mechanical properties. The results of cytotoxicity and prolonged drug release characteristics revealed the suitability of the hydrogels as drug delivery matrices. The release kinetics was evaluated by fitting the experimental data to standard release equations, and the best fit was obtained with the Higuchi model of the hydrogel. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis,swelling properties,and network structure of new stimuli‐responsive poly(N‐acryloyl‐N′‐ethyl piperazine‐co‐N‐isopropylacrylamide) hydrogels

Poly(N‐acryloyl‐N′‐ethyl piperazine‐co‐N‐isopropylacrylamide) hydrogels were prepared by thermal free‐radical copolymerization of N‐acryloyl‐N′‐ethyl piperazine (AcrNEP) and N‐isopropylacrylamide (NIPAM) in solution using N, N′‐methylene bisacrylamide as the crosslinking agent. The gels were responsive to changes in external stimuli such as pH and temperature. The pH and temperature responsive character of the gels was greatly dependent on the monomer content, namely AcrNEP and NIPAM, respectively. The gels swelled in acidic (pH 2) and de‐swelled in basic (pH 10) solutions with a response time of 60 min. With increase in temperature from 23 to 80 °C the swelling of the gels decreased continuously and this effect was different in acidic and basic solutions. The temperature dependence of equilibrium water content of the gels was evaluated by the Gibbs–Helmholtz equation. Detailed analysis of the swelling properties of these new gels in relation to molecular heterogeneity in acidic (pH 2) and basic (pH 10) solutions were performed. Water transport property of the gels was studied gravimetrically. In acidic solution, the diffusion process was non‐Fickian (anomalous) while in basic solution, the diffusion was quasi‐Fickian. The effect was more evident in solution of pH 2 than in pH 10. Various structural parameters of the gels such as number‐average molar mass between crosslink (M_c), the crosslink density (ρ_c), and the mesh size (ξ) were evaluated. The mesh sizes of the hydrogels were between 64 and 783 Å in the swollen state in acidic solution and 20 and 195 Å in the collapsed state in basic solution. The mesh size increased between three to four times during the pH‐dependent swelling process. The amount of unbound water (free water) and bound water of the gels was also evaluated using differential scanning calorimetry. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel sulfobetaine‐sulfonic acid‐contained superswelling hydrogels

Novel hydrogels based on zwitterionic monomer [3‐(methacrylamido)propyl] dimethyl (3‐sulfopropyl) ammonium hydroxide (MPDSAH) and a strong acid monomer (2‐acrylamido‐2‐methylpropane sulfonic acid, AMPS) were synthesized through solution polymerization under normal conditions to achieve nearly quantitative gel yield. The structure of the gels was confirmed using infrared spectroscopy. Thermal properties were simultaneously studied by differential scanning calorimetry and thermogravimetric analysis (DSC/TGA). The effects of the polymerization variables on the swelling capacity of the products were investigated. It was found that, in a certain range of the monomers mol ratio, increase of AMPS content was surprisingly accompanied with swelling reduction. The swelling exhibited lower sensitivity to the crosslinker concentration (range 0.6–1.2 wt%) compared with the conventional superabsorbents. However, in contrast with the conventional acrylic acid‐based superabsorbents, the neutralization degree of AMPS part of the new gels had only a small enhancing effect on their swelling capacity. The effect of total monomer concentration on the hydrogel absorbency was also studied. The fully ionic hydrogels showed an unusual pH‐independency behavior, so that their absorbency was nearly unchanged in a wide range of pH. Such unexpected behavior was also observed for the swelling in the ionic environments with various ionic strengths. Copyright © 2005 John Wiley & Sons, Ltd.     

A novel pH‐ and thermo‐sensitive PVP/CMC semi‐IPN hydrogel: Swelling,phase behavior,and drug release study

Poly(N‐vinyl‐pyrrolidone) (PVP) hydrogel has been considered as a very interesting and promising thermosensitive material. The most vital shortcoming of PVP hydrogel as thermosensitive material is that it does not exhibit thermosensitivity under usual conditions. In this work, semi‐interpenetrating polymer network (semi‐IPN) hydrogels based on PVP and carboxymethylcellulose (CMC) were prepared. The volume phase transition temperature (VPTT) of the hydrogels was determined by swelling behavior and differential scanning calorimetry (DSC). The results showed that the VPTT was significantly dependent on CMC content and the pH of the swelling medium. The amount of CMC in the semi‐IPN hydrogels was 0.050, 0.075, and 0.100 g, the VPTT in buffer solution of pH 1.2 was 29.9 °C, 27.5 °C and 24.5 °C, respectively. In addition, the VPTT occurred in buffer solution of pH 1.2, but did not appear in alkaline medium. Bovine serum albumin (BSA) as a model drug was loaded and the in vitro release studies were carried out in different buffer solutions and at different temperatures. The results of this study suggest that PVP/CMC semi‐IPN hydrogels could serve as potential candidates for protein drug delivery in the intestine. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1749–1756, 2010     

Investigation of drug release from thermo‐ and pH‐sensitive poly(N‐isopropylacrylamide/itaconic acid) copolymeric hydrogels

N‐Isopropylacrylamide/itaconic acid copolymeric hydrogels were prepared by irradiation of the ternary mixtures of N‐isopropylacrylamide/itaconic acid/water by γ‐rays at ambient temperature. The dependence of swelling properties and phase transitions on the comonomer concentration and temperature were investigated. The hydrogels showed both temperature and pH responses. The effect of comonomer concentration on the uptake and release behavior of the hydrogels was studied. Methylene blue (MB) was used as a model drug for the investigation of drug uptake and release behavior of the hydrogels. The release studies showed that the basic parameters affecting the drug release behavior of the hydrogels were pH and temperature of the solution. Copyright © 2004 John Wiley & Sons, Ltd.     

Multi‐Stimuli‐Responsive Polymer Materials: Particles,Films, and Bulk Gels

Stimuli‐responsive polymers have received tremendous attention from scientists and engineers for several decades due to the wide applications of these smart materials in biotechnology and nanotechnology. Driven by the complex functions of living systems, multi‐stimuli‐responsive polymer materials have been designed and developed in recent years. Compared with conventional single‐ or dual‐stimuli‐based polymer materials, multi‐stimuli‐responsive polymer materials would be more intriguing since more functions and finer modulations can be achieved through more parameters. This critical review highlights the recent advances in this area and focuses on three types of multi‐stimuli‐responsive polymer materials, namely, multi‐stimuli‐responsive particles (micelles, micro/nanogels, vesicles, and hybrid particles), multi‐stimuli‐responsive films (polymer brushes, layer‐by‐layer polymer films, and porous membranes), and multi‐stimuli‐responsive bulk gels (hydrogels, organogels, and metallogels) from recent publications. Various stimuli, such as light, temperature, pH, reduction/oxidation, enzymes, ions, glucose, ultrasound, magnetic fields, mechanical stress, solvent, voltage, and electrochemistry, have been combined to switch the functions of polymers. The polymer design, preparation, and function of multi‐stimuli‐responsive particles, films, and bulk gels are comprehensively discussed here.     

Thermal behavior and network structure of poly(N‐vinyl‐2‐pyrrolidone‐crotonic acid) hydrogels prepared by radiation‐induced polymerization

Poly(N‐vinyl‐2‐pyrrolidone‐crotonic acid) [P(VP/CrA)] hydrogels were prepared by irradiating the ternary mixture of VP/CrA and crosslinking agent ethylene glycol dimethacrylate (EGDMA) in water by γ rays at ambient temperature. Differential scanning calorimetry and thermogravimetric analysis were performed to evaluate the thermal properties of ionized networks and to establish if they showed thermal differences that could be related to the CrA content in the gel system. The volume swelling ratio of P(VP/CrA) hydrogels were investigated as a function of the pH in the immersing solution. The volume swelling ratio of these hydrogels increased with an increase in pH and a decrease CrA content in the hydrogel. The volume swelling ratio of the hydrogels was also evaluated using an equation, based on the Flory—Huggins thermodynamic theory, the phantom network theory of James–Guth and Donnan theory of swelling of weakly charged ionic gels for determination of the molecular weight between crosslinks and the polymer–solvent interaction parameter (χ). Copyright © 2004 John Wiley & Sons, Ltd.