Synthesis and enantioseparation behaviors of novel immobilized 3,5‐dimethylphenylcarbamoylated polysaccharide chiral stationary phases

Two new polysaccharide‐derived chiral selectors, namely, 6‐azido‐6‐deoxy‐3,5‐dimethylphenylcarbamoylated amylose and 6‐azido‐6‐deoxy‐3,5‐dimethylphenyl carbamoylated cellulose, were synthesized under homogeneous conditions and immobilized onto aminized silica gel by the Staudinger reaction, resulting in two new immobilized polysaccharide chiral stationary phases (CSPs). Their enantioseparation performances were investigated under normal‐phase mode by HPLC. Among 17 analytes, baseline separations of 12 pairs of enantiomers are achieved on the immobilized cellulose CSP, which demonstrates that this new cellulose material exhibits almost the same enantioseparation performance as the coated cellulose CSP. In addition, the amylose‐derived CSP presents limited enantiorecognition ability but certain complementarity with the immobilized and coated cellulose‐based materials. Neither metolachlor nor paclitaxel side chain acids are separated on two cellulose‐derived CSPs, but effective separations are obtained on the immobilized amylose column.     

Optimization of the LC enantioseparation of chiral pharmaceuticals using cellulose tris(4‐chloro‐3‐methylphenylcarbamate) as chiral selector and polar non‐aqueous mobile phases

The resolving power of a new commercial polysaccharide‐based chiral stationary phase, Sepapak‐4, with cellulose tris(4‐chloro‐3‐methylphenylcarbamate) coated on silica microparticles as chiral selector, was evaluated toward the enantioseparation of ten basic drugs with widely different structures and hydrophobic properties, using ACN as the main component of the mobile phase. A multivariate approach (experimental design) was used to screen the factors (temperature, n‐hexane content, acidic and basic additives) likely to influence enantioresolution. Then, the optimization was performed using a face‐centered central composite design. Complete enantioseparation could be obtained for almost all tested chiral compounds, demonstrating the high chiral discrimination ability of this chiral stationary phase using polar organic mobile phases made up of ACN and containing an acidic additive (TFA or formic acid), 0.1% diethylamine and n‐hexane. These results clearly illustrate the key role of the nature of the acidic additive in the mobile phase.     

Cellulose tris‐(3,5‐dimethylphenylcarbamate)‐based chiral stationary phase for the enantioseparation of drugs in supercritical fluid chromatography: comparison with HPLC

A cellulose tris‐(3,5‐dimethylphenylcarbamate)‐based chiral stationary phase was studied as a tool for the enantioselective separation of 21 selected analytes with different pharmaceutical and physicochemical properties. The enantioseparations were performed using supercritical fluid chromatography. The effect of the mobile phase composition was studied. Four different additives (diethylamine, triethylamine, isopropylamine, and trifluoroacetic acid) and isopropylamine combined with trifluoroacetic acid were tested and their influence on enantioseparation was compared. The influence of two different mobile phase co‐solvents (methanol and propan‐2‐ol) combined with all the additives was also evaluated. The best mobile phase compositions for the separation of the majority of enantiomers were CO₂/methanol/isopropylamine 80:20:0.1 v/v/v or CO₂/propan‐2‐ol/isopropylamine/trifluoroacetic acid 80:20:0.05:0.05 v/v/v/v. The best results were obtained from the group of basic β‐blockers. A high‐performance liquid chromatography separation system composed of the same stationary phase and mobile phase of similar properties prepared as a mixture of hexane/propan‐2‐ol/additive 80:20:0.1 v/v/v was considered for comparison. Supercritical fluid chromatography was found to yield better results, i.e. better enantioresolution for shorter analysis times than high‐performance liquid chromatography. However, examples of enantiomers better resolved under the optimized conditions in high‐performance liquid chromatography were also found.     

Improved preparation of chiral stationary phases via immobilization of polysaccharide derivative‐based selectors using diisocyanates

The classical method for the preparation of immobilized polysaccharide‐based chiral stationary phases (CSPs) with a diisocyanate was improved. Cellulose or amylose was directly coated onto 3‐aminopropyl silica gel after it was dissolved in a mixture of N,N‐dimethylacetamide, LiCl, and pyridine, then immobilized onto silica gel with a diisocyanate, and finally allowed to react with an excess of corresponding isocyanate. Four polysaccharide derivatives, 3,5‐dimethylphenylcarbamate and 3,5‐dichlorophenylcarbamate of cellulose, and 3,5‐dimethylphenylcarbamate and 5‐chloro‐2‐methylphenylcarbamate of amylose, were immobilized onto silica gel utilizing this method. Compared with the classical diisocyanate method, the improved procedure avoided the derivatization and regeneration of 6‐hydroxyl groups of cellulose and amylose, and thus showed an advantage for simple and economical preparation. The relationships among the amount of diisocyanate used, immobilization efficiency, and enantioseparation on the cellulose‐based CSPs were investigated. Also, the solvent durability of the obtained CSPs was examined with eluents containing chloroform or THF. By utilizing these eluents, the chiral recognition abilities of the obtained CSPs for some of the tested racemates were improved.     

Immobilized Polysaccharide-Based Stationary Phases for Enantioseparation in Normal Versus Reversed Phase HPLC

A set of 31 structurally different chiral pharmaceutical compounds was used as model analytes for investigation of the enantioselective potential of two immobilized polysaccharide-based chiral stationary phases under normal and reversed phase separation conditions. These chiral stationary phases differed in the polymeric backbone, amylose or cellulose, but possessed the same derivatization functionality. The results showed that the tris(3,5-dimethylphenylcarbamate) of amylose and cellulose have very broad, and often complementary, enantiorecognition abilities. In general, normal phase separation mode seemed to be more advantageous for separation of the majority of studied pharmaceuticals no matter if amylose- or cellulose-based columns were used. However, in certain cases the reversed phase separation system yielded better results. The combination of these two immobilized chiral stationary phases offers a powerful tool for enantioseparation of different types of pharmaceuticals in the normal and/or reversed phase mode.

     

Chiral stationary phases for separation of intermedine and lycopsamine enantiomers from Symphytum uplandicum

Enantioseparation of the pyrrolizidine alkaloid isomers intermedine and lycopsamine, isolated from Symphytum uplandicum, is discussed. The separatory power of two immobilized carbohydrate‐based chiral HPLC columns, Chiralpak IA and IC, in different chromatographic conditions is compared. The study demonstrated the importance of solvent and column selection while developing such chiral HPLC separation methods. The baseline HPLC separation of the two alkaloid isomers in preparatory scale is reported for the first time. The optimized separations were achieved on a Chiralpak IA column with mobile phases of ACN/methanol (80:20) and methanol/methyl‐t‐butyl ether (90:10), both containing 0.1% diethylamine.     

Enantioseparation of selected chiral sulfoxides using polysaccharide-type chiral stationary phases and polar organic, polar aqueous-organic and normal-phase eluents

HPLC enantioseparation of selected chiral sulfoxides was studied using cellulose and amylose phenylcarbamate derivatives as chiral stationary phases (CSPs). The contributions of various functional groups of a chiral analyte as well as the polysaccharide derivatives in the analyte retention and chiral recognition were evaluated. A very high enantioseparation factor exceeding 110 was observed in the enantioseparation of 2-(benzylsulfinyl)benzamide (BSBA) on cellulose tris(3,5-dichlorophenylcarbamate) (CDCPC) CSP by using 2-propanol as a mobile phase. The enantiomer elution order was opposite on cellulose and amylose phenylcarbamates. For the polysaccharide-type CSPs, pure alcohols such as methanol, ethanol and 2-propanol represent a valuable alternative to more common alcohol-hydrocarbon and reversed-phase eluents.     

Application and comparison of immobilized and coated amylose tris-(3,5-dimethylphenylcarbamate) chiral stationary phases for the enantioselective separation of beta-blockers enantiomers by liquid chromatography

A direct liquid chromatographic enantioselective separation of a set of β-blocker enantiomers on the new immobilized and conventional coated amylose tris-(3,5-dimethylphenylcarbamate) chiral stationary phases (Chiralpak IA and Chiralpak AD, respectively) was studied using methanol as mobile phase and ethanolamine as an organic modifier (100:0.1, v/v). The separation, retention and elution order of the enantiomers on both columns under the same conditions were compared. The effect of the immobilization of the amylose tris-(3,5-dimethylphenylcarbamate) chiral stationary phase on silica (Chiralpak IA) on the chiral recognition ability was noted when compared to the coated phase (Chiralpak AD) which possesses a higher resolving power than the immobilized one (Chiralpak IA). A few racemates, which were not or poorly resolved on the immobilized Chiralpak IA were most efficiently resolved on the coated Chiralpak AD. However, the immobilized phase withstand solvents like dichloromethane when used as an eluent or as a dissolving agent for the analyte. The versatility of the immobilized Chiralpak IA in monitoring reactions performed in dichloromethane using direct analysis techniques without further purification, workup or removal of dichloromethane was studied on a representative example consisting of the lipase-catalyzed irreversible transesterification of a β-blocker using either vinylacetate or isopropenyl acetate as acyl donor in dichloromethane as organic solvent.     

Comparison of HPLC enantioseparation of substituted binaphthyls on CD‐, polysaccharide‐ and synthetic polymer‐based chiral stationary phases

Retention and enantioseparation behavior of ten 2,2′‐disubstituted or 2,3,2′‐trisubstituted 1,1′‐binaphthyls and 8,3′‐disubstituted 1,2′‐binaphthyls, which are used as catalysts in asymmetric synthesis, was investigated on eight chiral stationary phases (CSPs) based on β‐CD, polysaccharides (tris(3,5‐dimethylphenylcarbamate) cellulose or amylose CSPs) and new synthetic polymers (trans‐1,2‐diamino‐cyclohexane, trans‐1,2‐diphenylethylenediamine and trans‐9,10‐dihydro‐9,10‐ethanoanthracene‐(11S,12S)‐11,12‐dicarboxylic acid CSPs). Normal‐, reversed‐phase and polar‐organic separation modes were employed. The effect of the mobile phase composition was examined. The enantiomeric separation of binaphthyl derivatives, which possess quite similar structures, was possible in different enantioselective environments. The substituents and their positions on the binaphthyl skeleton affect their properties and, as a consequence, the separation system suitable for their enantioseparation. In general, the presence of ionizable groups on the binaphthyl skeleton, substitution with non‐identical groups and a chiral axis in the 1,2′ position had the greatest impact on the enantiomeric discrimination. The 8,3′‐disubstituted 1,2′‐binaphthyl derivatives were the most easily separated compounds in several separation systems. From all the chiral stationary phases tested, cellulose‐based columns were shown to be the most convenient for enantioseparation of the studied analytes. However, the polymeric CSPs with their complementary behavior provided good enantioselective environments for some derivatives that could be hardly separated in any other chromatographic system.     

Chiral separation of helical chromenes with chloromethyl phenylcarbamate polysaccharide‐based stationary phases

Two chloromethyl phenylcarbamate‐based chiral stationary phases, one containing an amylose‐type chiral selector (Lux Amylose 2, from Phenomenex) and the other a cellulose‐type one (Lux Cellulose‐4, from Phenomenex), were successfully used for the chiral resolution of three helical chromenes featuring a helicene‐like structure. The compound bearing a phenyl substituent on the helicene‐like structure was enantioresolved at 25°C with Lux Cellulose‐4 and a n‐hexane/1‐propanol 99:1 v/v eluent. With a n‐hexane/2‐propanol 99.8:0.2 v/v mobile phase, the same column (operated at 35°C) provided the separation of the four isomers of the compound having a hexyl residue on the helicene‐like motif and an additional asymmetric carbon. Lux Amylose‐2 was necessary for the enantioseparation of the compound having the sole hexyl residue on the helical scaffold. For the last compound a n‐hexane/2‐propanol 99.8:0.2 v/v eluent was used, and the column temperature was fixed at 5°C. The enantiomer elution order was appraised by using electronic circular dichroism and theoretical calculations. Notably, different thermodynamics of retention and enantioseparation were observed for molecules with pronounced structural similarity, that is, the enantiomer pairs of the compound containing the additional asymmetric carbon atom. Indeed, both entropically and enthalpically controlled adsorption and separation processes were observed.     

Preparation and HPLC application of chiral stationary phase from 4‐tert‐butylphenylcarbamates of cellulose and amylose immobilized onto silica gel

The 4‐tert‐butylphenylcarbamates of cellulose and amylose bearing a small amount of 3‐(triethoxysilyl)propyl residues were synthesized by a one‐pot process and efficiently immobilized onto a silica gel through intermolecular polycondensation of the triethoxysilyl groups. The obtained chiral packing materials (CPMs) were evaluated by HPLC. The polysaccharide derivatives containing about 1–2% of the 3‐(triethoxysilyl)propyl residue were efficiently immobilized with a high chiral recognition ability. The immobilized CPMs could be used with the eluents containing chloroform and tetrahydrofuran (THF), which cannot be used with the conventional coated‐type CPMs. By using these eluents, the chiral recognition for many racemates was improved.     

纤维素衍生物手性固定相高效液相色谱法分离盐酸川丁特罗对映体

以纤维素三-(3,5-二甲基苯基氨基甲酸酯)为手性固定相(Lux Cellulose-1),建立了在正相色谱条件下直接分离盐酸川丁特罗对映体的高效液相色谱法。考察了乙醇、异丙醇等有机改性剂,三氟乙酸、二乙胺等流动相添加剂和柱温对对映体分离的影响。结果显示,酸性和碱性添加剂对对映体分离的影响最为显著: 添加二乙胺时两对映体无分离趋势;添加三氟乙酸时对映体保留强,且分离趋势明显;而同时添加三氟乙酸和二乙胺则两对映体分离显著改善,分离度可达4.0。优化后的色谱条件: 色谱柱为Lux Cellulose-1手性柱(250 mm×4.6 mm, 5 μm),流动相为正庚烷-乙醇-三氟乙酸-二乙胺(88:12:0.3:0.05, v/v/v/v),流速为1.0 mL/min,紫外检测波长为246 nm,柱温为25 ℃。该方法简便,快速,可用于左旋盐酸川丁特罗原料中右旋异构体杂质的检查。     

Enantioselective separation of biologically active basic compounds in ultra-performance supercritical fluid chromatography

The enantioseparation of basic compounds represent a challenging task in modern SFC. Therefore this work is focused on development and optimization of fast SFC methods suitable for enantioseparation of 27 biologically active basic compounds of various structures. The influences of the co-solvent type as well as different mobile phase additives on retention, enantioselectivity and enantioresolution were investigated. Obtained results confirmed that the mobile phase additives, especially bases (or the mixture of base and acid), improve peak shape and enhance enantioresolution. The best results were achieved with isopropylamine or the mixture of isopropylamine and trifluoroacetic acid as additives. In addition, the effect of temperature and back pressure were evaluated to optimize the enantioseparation process. The immobilized amylose-based chiral stationary phase, i.e. tris(3,5-dimethylphenylcarbamate) derivative of amylose proved to be useful tool for the enantioseparation of a broad spectrum of chiral bases. The chromatographic conditions that yielded baseline enantioseparations of all tested compounds were discovered. The presented work can serve as a guide for simplifying the method development for enantioseparation of basic racemates in SFC.     

Comparative Enantiomer-Resolving Ability of Coated and Covalently Immobilized Versions of Two Polysaccharide-Based Chiral Selectors in High-Performance Liquid Chromatography

The separation of enantiomers of over 175 randomly selected chiral acidic, basic, and neutral compounds was studied on 4 polysaccharide-based chiral columns made by coating or covalent attachment of cellulose 3,5-dichlorophenylcarbamate or amylose 3,5-dimethylphenylcarbamate on the surface of silica. Triscarbamate derivatives of cellulose or amylose were used for the preparation of coated-type columns, while in the case of covalently immobilized chiral stationary phases, the respective polysaccharides were not completely carbamoylated but only close to triscarbamates. It was found that this minimal difference in the chemical composition of the polysaccharide derivatives resulted in significantly different enantiomer-resolving ability for certain groups of chiral compounds while only marginally different for other chiral analytes. This potential difference between coated- and covalently immobilized versions of the “same” chiral selector must be considered in method development with these columns, as well as in method transfer between them.     

淀粉及纤维素三(3-三氟甲基苯基氨基甲酸酯)手性固定相的制备及其性能评价

为了扩展多糖类手性固定相的种类,制备了基于淀粉及纤维素三(3-三氟甲基苯基氨基甲酸酯)的涂敷型手性固定相,以正己烷-异丙醇混合液为流动相,对8种手性化合物进行了高效液相色谱拆分。研究表明: 虽然与应用最广泛的分别以淀粉及纤维素三(3,5-二甲基苯基氨基甲酸酯)为手性选择因子的商品化手性柱Chiralpak AD和Chiralcel OD相比,所制备的手性固定相的手性分离能力较低,但纤维素三(3-三氟甲基苯基氨基甲酸酯)手性固定相显示出特异的手性识别能力,一些手性化合物在此固定相上得到了比在Chiracel OD上更好的分离;所制备的手性固定相的手性识别能力随流动相中异丙醇含量的降低而变好,当流动相中正己烷与异丙醇的体积比为95:5时所制备的手性固定相显示出相对较高的手性识别能力;总体来说,淀粉三(3-三氟甲基苯基氨基甲酸酯)手性固定相的手性识别能力稍强于纤维素三(3-三氟甲基苯基氨基甲酸酯)手性固定相,同时两种手性固定相的手性识别能力具有一定的互补性。     

Comparative studies of immobilized chiral stationary phases based on polysaccharide derivatives for enantiomeric separation of 15 azole compounds

Immobilized polysaccharide‐based columns showed excellent enantioselectivity in normal phase separation mode. In this work, enantioseparation abilities of four immobilized polysaccharide‐derived chiral stationary phases (Chiralpak IA, Chiralpak IB, Chiralpak IC, and Chiralpak ID) toward 15 azole compounds were evaluated. Separation was carried out using n‐hexane as mobile phase with ethanol, 1‐propanol, 1‐butanol, and 2‐propanol as modifiers. And twelve compounds have achieved baseline separation with the resolutions ranging between 2.05 and 21.73. The enantioseparation on the four polysaccharide‐based chiral columns using different alcohol modifiers was compared. In general, the best separation performance was identified as Chiralpak IC, which was able to resolve 11 compounds to baseline and two partially under the screening conditions. Separation on Chiralpak IB was not satisfactory, because only four compounds were baseline separated.     

Preparation and characterization of a polystyrene/bovine serum albumin nanoparticle‐coated capillary for chiral separation using open‐tubular capillary electrochromatography

Polystyrene (PS) nanoparticles coated by BSA, hereafter denoted as PS/BSA, were prepared and chemically immobilized for the first time onto a capillary inner wall for open‐tubular CEC (OTCEC). EOF and scanning electron micrography were used to characterize the prepared nanoparticle‐coated capillaries. To investigate the performance of the prepared columns in OTCEC, chiral separation of d ,l ‐tryptophan (dl ‐Trp) was performed in monolayer BSA‐modified capillary and PS/BSA nanoparticle‐coated columns. The results indicated that the nanoparticle‐modified column afforded a higher resolution compared with the monolayer type. Rapid enantioseparation of dl ‐Trp (within 3 min) was achieved with the PS/BSA‐immobilized column using an electroosmotic pump‐assisted CEC. Enantiomer separations of other compounds like dl ‐tyrosine and warfarin were also achieved with the column. Besides, run‐to‐run and column‐to‐column repeatabilities of the PS/BSA‐coated column in the chiral separation were systematically introduced.     

High‐performance liquid chromatographic enantioseparation of amino alcohol analogues possessing 1,2,3,4‐tetrahydroisoquinoline skeleton on polysaccharide‐based chiral stationary phases

The stereoisomers of 1,2,3,4‐tetrahydroisoquinoline amino alcohol analogues and derivatives thereof were separated in normal‐phase mode on chiral stationary phases based on preprepared silica coated with cellulose tris‐(3,5‐dimethylphenyl carbamate), cellulose tris‐(3‐chloro‐4‐methylphenyl carbamate), cellulose tris‐(4‐methylbenzoate) or cellulose tris‐(4‐chloro‐3‐methylphenyl carbamate). On all the investigated chiral columns, the retention and the enantioseparation were influenced by the nature and the concentrations of the mobile phase components and additives, and also the temperature. Experiments were performed in the temperature range 10–50°C. Thermodynamic parameters were calculated from plots of lnα vs 1/T. On these polysaccharide‐based chiral columns, both enthalpy‐driven separations and entropy‐controlled enantioseparations were observed. The latter was advantageous with regard to the shorter retention and greater selectivity at high temperature. The sequence of elution of the stereoisomers was determined in all cases. Copyright © 2014 John Wiley & Sons, Ltd.     

Thermodynamic enantioseparation behavior of phenylthiohydantoin‐amino acid derivatives in supercritical fluid chromatography on polysaccharide chiral stationary phases

Thirteen pairs of enantiomers belonging to the same structural family (phenylthiohydantoin‐amino acids) were analyzed on two polysaccharide chiral stationary phases, namely, tris‐(3,5‐dimethylphenylcarbamate) of amylose (Chiralpak AD‐H) or cellulose (Chiralcel OD‐H) in supercritical fluid chromatography with a carbon dioxide/methanol mobile phase (90:10 v/v). Five different temperatures (5, 10, 20, 30, 40°C) were applied to evaluate the thermodynamic behavior of these enantioseparations. On the cellulose stationary phase, the retention, and separation trends were most similar among the set of probe analytes, suggesting that the chiral cavities in this stationary phase have little diversity, or that all analytes accessed the same cavities. Conversely, the retention and separation trends on the amylose phase were much more diverse, and could be related to structural differences among the set of probe analytes (carbon chain length in the amino acid residue, secondary amine in proline, existence of covalent rings, or formation of pseudo‐rings via intramolecular hydrogen bonds). The large variability of behaviors on the amylose phase suggests that the chiral‐binding sites in this chiral stationary phase have more variety than on the cellulose phase, and that the analytes did access different cavities.     

Comparison of separation performance of polysaccaride-based chiral stationary phases in enantioseparation of 1-(4-chlorobenzhydryl)piperazine benzamide derivatives by HPLC

Analytical high-performance liquid chromatographic enantioseparation of 1-(4-chlorobenzhydryl) piperazine benzamide derivatives was accomplished on different chiral stationary phases. The enantiomers of the compounds were resolved by normal-phase chromatography on silica-based amylose tris(3,5-dimethylphenylcarbamate) (Chiralpak AD-H), cellulose tris(3,5-dimethylphenylcarbamate) (Chiralcel OD-H) and cellulose tris(4-methylbenzoate) (Chiralcel OJ) columns with mobile phases consisting of mixtures of n-hexane and ethanol in different proportions (90: 10, 80: 20). The mobile phase and the chiral stationary phase were varied to achieve the best resolution. The effect of the concentration of ethanol in the mobile phase was studied. The resolution obtained on the three columns was significant.