Atomic-Scale Insight into Exsolution of CoFe Alloy Nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3−δ with Efficient CO2 Electrolysis

In situ exsolution of metal nanoparticles in perovskite under reducing atmosphere is employed to generate a highly active metal–oxide interface for CO₂ electrolysis in a solid oxide electrolysis cell. Atomic-scale insight is provided into the exsolution of CoFe alloy nanoparticles in La_0.4Sr_0.6Co_0.2Fe_0.7Mo_0.1O_3−δ (LSCFM) by in situ scanning transmission electron microscopy (STEM) with energy-dispersive X-ray spectroscopy and DFT calculations. The doped Mo atoms occupy B sites of LSCFM, which increases the segregation energy of Co and Fe ions at B sites and improves the structural stability of LSCFM under a reducing atmosphere. In situ STEM measurements visualized sequential exsolution of Co and Fe ions, formation of CoFe alloy nanoparticles, and reversible exsolution and dissolution of CoFe alloy nanoparticles in LSCFM. The metal–oxide interface improves CO₂ adsorption and activation, showing a higher CO₂ electrolysis performance than the LSCFM counterparts.     

Nanocomposites based on opal matrices and iron subgroup metal nanoparticles

Three-dimensional nanocomposites based on ordered opal matrices (OMs) and metal nanoparticles were prepared by the reduction of salts and oxides of iron subgroup metals (M = Ni, Co, and Fe) and their binary and ternary mixtures with isopropanol in a supercritical state. The effect of the composition of the initial salts (nitrates or chlorides) on the phase composition of OM/M composites was determined. For a binary system of Ni and Co nitrates (1 : 1), the particles of a NiCo solid solution in a cubic modification were formed in an opal matrix after treatment in supercritical isopropanol. For the Ni-Fe and Co-Fe systems, the nanoparticles of solid solutions based on nickel or ??-, ??-cobalt metal and also oxides or an MFe₂O₄ phase with the spinel structure were formed in opal matrices with the use of iron trichloride. The nanoparticles of iron metal and Ni₃Fe, NiFe, and CoFe intermetallic compounds with regular distributions of metal atoms were detected for the first time in addition to spinel phases upon the reduction of composites with Fe, Ni-Fe, and Co-Fe nitrates with supercritical isopropanol. The reduction of composites obtained by the thermal treatment of a ternary mixture of nickel and cobalt nitrates and iron chloride in supercritical isopropanol led to the formation of solid solution nanoparticles based on Ni, Co, and Fe with an fcc structure and an oxide phase with the spinel structure in the voids of opal matrices. In the composite based on an opal matrix and a ternary system of Ni-Co-Fe nitrates (1 : 1 : 1), the complete reduction of spinel phases to the intermetallic phases of Ni₃Fe, NiFe, and CoFe was noted.     

Synthesis of metal (Fe or Pd)/alloy (Fe–Pd)‐nanoparticles‐embedded multiwall carbon nanotube/sulfonated polyaniline composites by γ irradiation

Composites of multiwall carbon nanotubes (MWCNTs) and sulfonated polyaniline (SPAN) were prepared through the oxidative polymerization of a mixture of aniline, 2,5‐diaminobenzene sulfonic acid, and MWCNTs. Fe, Pd, or Fe–Pd alloy nanoparticles were embedded into the MWCNT–SPAN matrix by the reduction of Fe, Pd, or a mixture of Fe and Pd ions with γ radiation. Sulfonic acid groups and the emeraldine form of backbone units in SPAN served as the source for the reduction of the metal ions in the presence of γ radiation. The existence of metallic/alloy particles in the MWCNT–SPAN matrix was further ascertained through characterization by high‐resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, thermogravimetric analysis, and conductivity measurements. HRTEM pictures clearly revealed the existence of Fe, Pd, and Fe–Pd nanoparticles of various sizes in the MWCNT–SPAN matrices. There were changes in the electronic properties of the MWCNT–SPAN–M composites due to the interaction between the metal nanoparticles and MWCNT–SPAN. Metal‐nanoparticle‐loaded MWCNT–SPAN composites (MWCNT–SPAN–M; M = Fe, Pd, or Fe–Pd alloy) showed better thermal stability than the pristine polymers. The conductivity of the MWCNT–SPAN–M composites was approximately 1.5 S cm^?1, which was much higher than that of SPAN (2.46 × 10^?4 S cm^?1). Metal/alloy‐nanoparticle‐embedded, MWCNT‐based composite materials are expected to find applications in molecular electronics and other fields. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3355–3364, 2006     

Exchange‐Coupled fct‐FePd/α‐Fe Nanocomposite Magnets Converted from Pd/Fe3O4 Core/Shell Nanoparticles

We report the controlled synthesis of exchange‐coupled face‐centered tetragonal (fct) FePd/α‐Fe nanocomposite magnets with variable Fe concentration. The composite was converted from Pd/Fe₃O₄ core/shell nanoparticles through a high‐temperature annealing process in a reducing atmosphere. The shell thickness of core/shell Pd/Fe₃O₄ nanoparticles could be readily tuned, and subsequently the concentration of Fe in nanocomposite magnets was controlled. Upon annealing reduction, the hard magnetic fct‐FePd phase was formed by the interdiffusion between reduced α‐Fe and face‐centered cubic (fcc) Pd, whereas the excessive α‐Fe remained around the fct‐FePd grains, realizing exchange coupling between the soft magnetic α‐Fe and hard magnetic fct‐FePd phases. Magnetic measurements showed variation in the magnetic properties of the nanocomposite magnets with different compositions, indicating distinct exchange coupling at the interfaces. The coercivity of the exchange‐coupled nanocomposites could be tuned from 0.7 to 2.8 kOe and the saturation magnetization could be controlled from 93 to 160 emu g^?1. This work provides a bottom‐up approach using exchange‐coupled nanocomposites for engineering advanced permanent magnets with controllable magnetic properties.     

钴掺杂的磁性氧化铁纳米粒子的可控合成

通过油酸盐前驱体高温热解法制备出大小均匀的钴掺杂四氧化三铁球形纳米粒子, 其钴/铁摩尔比可以通过调节油酸钴与油酸铁的比例进行调变. 当产物中钴/铁摩尔比从0.024增加到0.156, 所制备的氧化铁纳米粒子的饱和磁矩从39 emu·g^-1逐渐减小到30 emu·g^-1, 而矫顽力从0 Oe升至190 Oe. 在305℃下, 随着反应体系的热解时间由0.5 h 增加到3 h, 所制备出的氧化铁纳米粒子尺寸逐渐由7 nm增加到14 nm. 热解时间较短时, 以高价态的四氧化三铁的晶型为主, 辅之以少量的氧化亚铁; 热解时间增加至2 h, 产物的晶型为四氧化三铁和氧化亚铁的复合物; 而继续增加热解时间至3 h, 除四氧化三铁和氧化亚铁之外, 还出现少量的零价态的CoFe合金, 说明铁(钴)元素经历了由三价到二价, 最后被还原为零价的过程. 随着反应温度的升高, 产物的尺寸逐渐增大, 同时产物中氧化亚铁的含量增多.     

Characterization of non‐Cr‐based deoxidizers on Al alloy 7475‐T7651

The effects of three non‐chromate‐based deoxidizers, namely NaBrO₃/HNO₃, (NH₄)₄Ce(SO₄)₄/H₂SO₄ and Fe(III)/HF/HNO₃, on the Al alloy 7475‐T7651 were investigated. Several analytical methods were employed, including SEM, AES, transmission electron microscopy (TEM), electron energy‐loss spectroscopy (EELS) and glow discharge optical emission spectrometry (GDOES), to study the effects on the surface of this alloy after each treatment compared with the as‐received and alkaline‐cleaned alloy surfaces. The untreated alloy was found to have a thick oxide of 200–320 nm, consisting mainly of MgO. Alkaline cleaning results in an etching effect that thins the oxide and also deposits a thin silicate layer on the surface. In the case of the deoxidizers, there is significant removal of the native oxide of the alloy by the NaBrO₃/HNO₃ deoxidizer. There is also evidence of intermetallic attack on the alloy. The (NH₄)₄Ce(SO₄)₄/H₂SO₄ deoxidizer, which is a low‐etch‐rate deoxidizer, resulted in a slight thinning of the oxide. However, the effect was not significantly greater than with alkaline cleaning alone. The most effective deoxidizer in reducing the oxide thickness of the alloy is Fe(III)/HF/HNO₃, in which the etch rate was sufficiently high to remove completely the native oxide. In this case, equilibrium between oxide removal and the formation of new oxides on the alloy surface was achieved. Copyright © 2004 John Wiley & Sons, Ltd.     

Aqueous CO2 Reduction with High Efficiency Using α‐Co(OH)2‐Supported Atomic Ir Electrocatalysts

Electrochemical reduction of CO₂ into energy‐dense chemical feedstock and fuels provides an attractive pathway to sustainable energy storage and artificial carbon cycle. Herein, we report the first work to use atomic Ir electrocatalyst for CO₂ reduction. By using α‐Co(OH)₂ as the support, the faradaic efficiency of CO could reach 97.6 % with a turnover frequency (TOF) of 38290 h^?1 in aqueous electrolyte, which is the highest TOF up to date. The electrochemical active area is 23.4‐times higher than Ir nanoparticles (2 nm), which is highly conductive and favors electron transfer from CO₂ to its radical anion (CO₂^.?). Moreover, the more efficient stabilization of CO₂^.? intermediate and easy charge transfer makes the atomic Ir electrocatalyst facilitate CO production. Hence, α‐Co(OH)₂‐supported atomic Ir electrocatalysts show enhanced CO₂ activity and stability.     

Interfacial Enhancement by γ‐Al2O3 of Electrochemical Oxidative Dehydrogenation of Ethane to Ethylene in Solid Oxide Electrolysis Cells

Oxidative dehydrogenation of ethane (ODE) is limited by the facile deep oxidation and potential safety hazards. Now, electrochemical ODE reaction is incorporated into the anode of a solid oxide electrolysis cell, utilizing the oxygen species generated at anode to catalytically convert ethane. By infiltrating γ‐Al₂O₃ onto the surface of La_0.6Sr_0.4Co_0.2Fe_0.8O_3‐δ‐Sm_0.2Ce_0.8O_2‐δ (LSCF‐SDC) anode, the ethylene selectivity reaches as high as 92.5 %, while the highest ethane conversion is up to 29.1 % at 600 °C with optimized current and ethane flow rate. Density functional theory calculations and in situ X‐ray photoelectron spectroscopy characterizations reveal that the Al₂O₃/LSCF interfaces effectively reduce the amount of adsorbed oxygen species, leading to improved ethylene selectivity and stability, and that the formation of Al‐O‐Fe alters the electronic structure of interfacial Fe center with increased density of state around Fermi level and downshift of the empty band, which enhances ethane adsorption and conversion.     

Synthesis, properties, and thermal decomposition of compounds [Co(En)3][Fe(CN)6] · 2H2O and [Co(En)3]4[Fe(CN)6]3 · 15H2O

Binary complex salts, [Co(En)₃][Fe(CN)6] · 2H₂O and [Co(En)₃]₄[Fe(CN)₆]₃ · 15H₂O, are synthesized. The properties of the salts and their thermolysis in air, dihydrogen, and argon are studied. Oxides of the central ions of the binary complex salts are found to be the thermolysis products in an oxidative atmosphere. Solid solutions (intermetallic compounds) CoFe are the thermolysis products in the reductive atmosphere, whereas intermetallides containing considerable amounts of C and N and an impurity of Co and Fe oxides are the thermolysis products in an inert atmosphere. Gaseous thermolysis products in dihydrogen and argon are NH₃, hydrocarbons, and ethylenediamine.     

Improved Photocatalytic Activity and Stability of Nano‐sized Ag/Ag2CO3 Plasmonic Photocatalyst by Surface Modification of Fe(III) Nanocluster

The surface modification of Ag/Ag₂CO₃ with Fe(III) ions has been achieved through simply photoreduction‐impregnation method. The obtained products were characterized by means of X‐ray diffraction (XRD), scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), and UV‐vis absorption spectroscopy. Under visible‐light irradiation (γ>420 nm), the Fe(III)/Ag/Ag₂CO₃ sample displays a higher photocatalytic activity and stability than pure Ag₂CO₃ and Ag/Ag₂CO₃ samples for the degradation of methyl orange (MO). The improved photocatalytic activity and stability of this ternary system could be ascribed to the synergetic effect between Ag nanoparticles and Fe(III) nanocluster. The metallic Ag nanoparticles cause an obviously enhanced visible‐light absorption to produce more photogenerated charges, while the Fe(III) works as an active site for the following oxygen reduction to reduce the recombination rate of photogenerated electrons and holes.     

Controlled Anisotropic Growth of Co‐Fe‐P from Co‐Fe‐O Nanoparticles

A facile approach to bimetallic phosphides, Co‐Fe‐P, by a high‐temperature (300 °C) reaction between Co‐Fe‐O nanoparticles and trioctylphosphine is presented. The growth of Co‐Fe‐P from the Co‐Fe‐O is anisotropic. As a result, Co‐Fe‐P nanorods (from the polyhedral Co‐Fe‐O nanoparticles) and sea‐urchin‐like Co‐Fe‐P (from the cubic Co‐Fe‐O nanoparticles) are synthesized with both the nanorod and the sea‐urchin‐arm dimensions controlled by Co/Fe ratios. The Co‐Fe‐P structure, especially the sea‐urchin‐like (Co_0.54Fe_0.46)₂P, shows enhanced catalysis for the oxygen evolution reaction in KOH with its catalytic efficiency surpassing the commercial Ir catalyst. Our synthesis is simple and may be readily extended to the preparation of other multimetallic phosphides for important catalysis and energy storage applications.     

Photocatalytic Reduction of Carbon Dioxide by Hydrous Hydrazine over Au–Cu Alloy Nanoparticles Supported on SrTiO3/TiO2 Coaxial Nanotube Arrays

Efficient photocatalytic conversion of CO₂ into CO and hydrocarbons by hydrous hydrazine (N₂H₄?H₂O) is achieved on SrTiO₃/TiO₂ coaxial nanotube arrays loaded with Au–Cu bimetallic alloy nanoparticles. The synergetic catalytic effect by the Au–Cu alloy nanoparticles and the fast electron‐transfer in SrTiO₃/TiO₂ coaxial nanoarchitecture are the main reasons for the efficiency, while N₂H₄?H₂O as the H source and electron donor provides a reducing atmosphere to protect the surface Cu atoms from oxidation, therefore maintaining the alloying effect which is the basis for the high photocatalytic activity and stability. This approach opens a feasible route to enhance the photocatalytic efficiency, which also benefits the development of photocatalysts and co‐catalysts.     

Molecular Evidence for Metallic Cobalt Boosting CO2 Electroreduction on Pyridinic Nitrogen

Nitrogen‐doped carbon materials (N‐C_mat) are emerging as low‐cost metal‐free electrocatalysts for the electrochemical CO₂ reduction reaction (CO₂RR), although the activities are still unsatisfactory and the genuine active site is still under debate. We demonstrate that the CO₂RR to CO preferentially takes place on pyridinic N rather than pyrrolic N using phthalocyanine (Pc) and porphyrin with well‐defined N‐C_mat configurations as molecular model catalysts. Systematic experiments and theoretic calculations further reveal that the CO₂RR performance on pyridinic N can be significantly boosted by electronic modulation from in‐situ‐generated metallic Co nanoparticles. By introducing Co nanoparticles, Co@Pc/C can achieve a Faradaic efficiency of 84 % and CO current density of 28 mA cm^?2 at ?0.9 V, which are 18 and 47 times higher than Pc/C without Co, respectively. These findings provide new insights into the CO₂RR on N‐C_mat, which may guide the exploration of cost‐effective electrocatalysts for efficient CO₂ reduction.     

Water‐in‐Supercritical CO2 Microemulsion Stabilized by a Metal Complex

Herein we propose for the first time the utilization of a metal complex for forming water‐in‐supercritical CO₂ (scCO₂) microemulsions. The water solubility in the metal‐complex‐stabilized microemulsion is significantly improved compared with the conventional water‐in‐scCO₂ microemulsions stabilized by hydrocarbons. Such a microemulsion provides a promising route for the in situ CO₂ reduction catalyzed by a metal complex at the water/scCO₂ interface.     

Two new soluble iron–oxo complexes: [Fe2(μ‐O)(μ‐O2CCF3)2(O2CCF3)2(C10H8N2)2] and [Fe4(μ3‐O)2(μ‐O2CCF3)6(O2CCF3)2(C10H8N2)2]·CF3CO2H

Two new iron–oxo clusters, viz. di‐μ‐tri­fluoro­acetato‐μ‐oxo‐bis­[(2,2′‐bi­pyridine‐κ²N,N′)(tri­fluoro­acetato‐κO)­iron(III)], [Fe₂O(CF₃CO₂)₄(C₁₀H₈N₂)₂], and bis(2,2′‐bi­pyridine)­di‐μ₃‐oxo‐hexa‐μ‐tri­fluoro­acetato‐bis­(tri­fluoro­acetato)­tetrairon(III) tri­fluoro­acetic acid solvate, [Fe₄O₂(CF₃CO₂)₈(C₁₀H₈N₂)₂]·CF₃CO₂H, contain dinuclear and tetranuclear Fe^III cores, respectively. The Fe^III atoms are in distorted octahedral environments in both compounds and are linked by oxide and tri­fluoro­acetate ions. The tri­fluoro­acetate ions are either bridging (bidentate) or coordinated to the Fe^III atoms via one O atom only. The fluorinated peripheries enhance the solubility of these compounds. Formal charges for all the Fe centers were assigned by summing valences of the chemical bonds to the Fe^III atom.     

Magnetocaloric Properties of Heterometallic 3d–Gd Complexes Based on the [Gd(oda)3]3− Metalloligand

A series of heterometallic 3d–Gd³⁺ complexes based on a lanthanide metalloligand, [M(H₂O)₆][Gd(oda)₃] ? 3 H₂O [M=Cr³⁺ ( 1‐Cr )] (H₂oda=2,2′‐oxydiacetic acid), [M(H₂O)₆][MGd(oda)₃]₂ ? 3 H₂O [M=Mn²⁺ ( 2‐Mn ), Fe²⁺ ( 2‐Fe ) and Co²⁺ ( 2‐Co )], and [M₃Gd₂(oda)₆(H₂O)₆] ? 12 H₂O [M=Ni²⁺ ( 3‐Ni ), Cu²⁺ ( 3‐Cu ), and Zn²⁺ ( 3‐Zn )], are reported. Magnetic and heat‐capacity studies revealed a significant impact on the magnetocaloric effect depending on the anisotropy of the 3d transition metal ions, as confirmed by comparison of the observed maximum values of ?ΔS_m between complexes 2‐Co and 1‐Cr . In these two complexes, the 3d metal ions have the same spin (S=3/2 for Co²⁺ and Cr³⁺ ions), and the theoretical calculation suggested a larger ?ΔS_m value for 2‐Co (47.8 J K^?1 kg^?1) than 1‐Cr (37.5 J K^?1 kg^?1); however, the significant anisotropy of Co²⁺ ions in 2‐Co , which can result in smaller effective spins, gives a smaller value of ?ΔS_m for 2‐Co (32.2 J K^?1 kg^?1) than for 1‐Cr (35.4 J K^?1 kg^?1) at ΔH=9 T.     

An Atomic‐Scale View of CO and H2 Oxidation on a Pt/Fe3O4 Model Catalyst

Metal–support interactions are frequently invoked to explain the enhanced catalytic activity of metal nanoparticles dispersed over reducible metal oxide supports, yet the atomic‐scale mechanisms are rarely known. In this report, scanning tunneling microscopy was used to study a Pt_1‐6/Fe₃O₄ model catalyst exposed to CO, H₂, O₂, and mixtures thereof at 550 K. CO extracts lattice oxygen atoms at the cluster perimeter to form CO₂, creating large holes in the metal oxide surface. H₂ and O₂ dissociate on the metal clusters and spill over onto the support. The former creates surface hydroxy groups, which react with the support, ultimately leading to the desorption of water, while oxygen atoms react with Fe from the bulk to create new Fe₃O₄(001) islands. The presence of the Pt is crucial because it catalyzes reactions that already occur on the bare iron oxide surface, but only at higher temperatures.     

Syntheses,Structures, and Polymorphism of β‐Diketonato Complexes – Co(thd)3

Oxidation of Co(thd)₂ dissolved in different solvents has been investigated in air and oxygen atmosphere. In oxygen atmosphere and at the boiling point of the solvents this treatment leads to oxidation of Co^II to Co^III, but also to degradation of some of the thd ligands and formation of a new mixed‐ligand complex. Three pure‐cultivated crystalline Co(thd)₃ phases are reported: 1 (room‐temperature phase), 2 (low‐temperature phase), and 3 (metastable phase) and in addition there exists an amorphous Co(thd)₃ phase ( 4 ) with approximate composition Co(thd)₃·xH(thd); x = 0.06. Reaction of metal(II) oxides (MO, M = Mn, Fe, and Co) with H(thd) under air or O₂ atmosphere is an easy direct route to M(thd)₃ complexes. Structure determinations are reported for Co(thd)₃ ( 1 – 3 ) based on single‐crystal X‐ray diffraction data. Modification 1 crystallizes in space group with a = b = 18.8100(10), c = 18.815(2) Å at 295 K; R(wR2) = 0.180, modification 2 in space group C2/c with a = 28.007(12), b = 18.482(8), c = 21.356(9) Å, β = 97.999(5)° at 100 K; R(wR2) =0.211, and modification 3 in space group Pnma with a = 19.2394(15), b = 18.8795(15), c = 10.7808(8) Å at 100 K; R(wR2) = 0.193. The molecular structures of 1 – 3 all comprise a central Co atom octahedrally co‐ordinated by the ketonato O atoms of three thd ligands. The transformation between modifications 1 and 2 is of a fully reversible second‐order character. Modifications 1 and 3 are, on the other hand, related by a quasi‐reversible cycle. Heat treatment (specifically sublimation) of 1 leads to 3 whereas re‐crystallization or prolonged storage at room temperature is required to regenerate 1 . Co(thd)₃ has sufficient thermal stability to permit sublimation without degradation. The various forms of Co(thd)₃ are all diamagnetic, viz. a confirmation of the Co^III valence state.     

CC Bonding of Graphene Oxide on 4‐Aminophenyl Modified Gold Electrodes towards Simultaneous Detection of Heavy Metal Ions

This paper studied the electrochemical sensors based on C? C bonding of graphene oxide (GO) on π‐conjugated aromatic group modified gold electrodes for simultaneous detection of heavy metal ions. For comparison, another sensing interface Au‐Ph‐NH‐CO‐GO, in which GO was modified to Au‐Ph‐NH₂ interfaces by amide bonding. On the basis of the principle of heavy metal ions complexation with oxygenated species on GO, the fabricated sensing interfaces were used for the simultaneous determination of Pb²⁺, Cu²⁺ and Hg²⁺. The performance of two sensing interfaces for simultaneous detection of three metal ions was compared. Au‐Ph‐GO sensing interface demonstrated higher sensitivity and better repeatability than Au‐Ph‐NH‐CO‐GO sensing interface.     

Syntheses,Crystal Structures,and Magnetic Properties of Three Metal‐Nitroxide Complexes with the V‐shaped 4, 4′‐Oxybis(benzoate)

Three new metal–nitroxide complexes {[Ni(NIT4Py)₂(obb)(H₂O)₂] · 1.5H₂O}_n ( 1 ), {[Co(NIT4Py)₂(obb)(H₂O)₂] · 2H₂O}_n ( 2 ), and [Co(IM4Py)₂(obb)₂(H₂O)₂][Co(IM4Py)₂(H₂O)₄] · 10H₂O ( 3 ) with the V‐shaped 4,4′‐oxybis(benzoate) [NIT4Py = 2‐(4′‐pyridyl)‐4,4,5,5‐tetramethylimidazoline‐1‐oxyl‐3‐oxide, IM4Py = 2‐(4′‐pyridyl)‐4,4,5,5‐tetramethylimidazoline‐1‐oxide, and obb = 4, 4′‐oxybis(benzoate) anion] were synthesized and structurally characterized. Single‐crystal X‐ray analyses indicate that complexes 1 and 2 crystallize in neutral one‐dimensional (1D) zigzag chains, in which the nitroxide–metal–nitroxide units are linked by the V‐shaped 4,4′‐oxybis(benzoate) anions, whereas complex 3 consists of isolated mononuclear [Co(IM4Py)₂(obb)₂(H₂O)₂]^2– anions and [Co(IM4Py)₂(H₂O)₄]²⁺ ions. Magnetic measurements show that complexes 1 and 2 both exhibit weak antiferromagnetic interactions between the metal ions and the nitroxides.