In Situ Synthesis of Imidazolium‐Crosslinked Ionogels via Debus–Radziszewski Reaction Based on PAMAM Dendrimers in Imidazolium Ionic liquid

This study reports a remarkably facile method to synthesize novel ionogels with imidazolium cycle crosslinks based on polyamidoamine (PAMAM) dendrimers via one‐pot, modified Debus–Radziszewski reaction in ionic liquid 1‐ethyl‐3‐methylimidazolium acetate ([EMIM][OAc]). High room temperature ionic conductivity (up to 6.8 mS cm⁻¹) is achieved, and more remarkably, it can still exceed 1 mS cm⁻¹ when the dendrimer content reached 70% because PAMAM dendrimers are completely amorphous with many cavities and the newly formed imidazolium crosslinks contains ions. The elastic modulus of these ionogels can exceed 10⁶ Pa due to the newly‐formed rigid imidazolium crosslinks. Crucially, these ionogels are robust gels even at temperatures up to 160 °C. Such novel ionogels with high ionic conductivity, tunable modulus, and flexibility are desirable for use in high‐temperature flexible electrochemical devices.     

Poly(dimethylsiloxane)‐Supported Ionogels with a High Ionic Liquid Loading

The immiscibility of poly(dimethylsiloxane) (PDMS) and ionic liquids (ILs) was overcome to create PDMS‐supported IL gels (ionogels) with IL loadings of up to 80 % by mass through a simple sol–gel reaction at room temperature. By stirring a mixture of a functionalized PDMS oligomer, formic acid, and an IL (or lithium‐in‐IL solution), a resin was formed that could be cast to create a freestanding, flexible ionogel. PDMS‐supported ionogels exhibited favorable ionic conductivity (ca. 3 mS cm^?1) and excellent mechanical behavior (elastic modulus: ca. 60 kPa; fatigue life: >5000 cycles; mechanically stable at temperatures up to 200 °C). The activation energy of ionic conductivity was shown to be nearly identical for the ionogel and the neat IL, in contrast to ionogel systems wherein the scaffold material is miscible with the IL. This similarity indicates that IL/scaffold chemical interactions are key to the understanding of ionogel electrical performance, especially at elevated temperatures.     

Ionogels of a Sugar Surfactant in Ionic Liquids

Green and environmentally friendly ionogels formed by a sugar surfactant were prepared in two kinds of imidazolium‐based ionic liquids. The phase transition from ribbon structures to lamellar structures induced by temperature and the transition mechanism were investigated in detail by means of freeze‐fracture TEM and field‐emission SEM observations, as well as small‐angle X‐ray scattering measurements. The rheological properties and tribological properties of two kinds of ionogels were systematically investigated. The difference in the lubricating properties and antiwear capability can be explained well by the mechanical and viscoelastic properties, as well as the different microstructures of samples destroyed by shear forces. This work provides a better understanding of the relationship between the structures, rheological properties, and tribological properties of ionogels.     

聚合物离子凝胶的研究进展

聚合物离子凝胶由聚合物网络封装离子液体而构成,通过调节离子液体和聚合物网络的特性,使其不仅具有高离子电导率、不可燃性和热、化学和电化学稳定性,而且具有高柔韧性和力学性能,近年来在离子皮肤、软机器人和柔性可穿戴系统等领域发展迅速。本文对近三年来聚合物基离子凝胶的结构设计特点、性能特性及其发展现状进行综述,分析和评述了聚合物结构对离子凝胶功能的影响机制,并对聚合物离子凝胶的未来发展进行了展望。     

Amino Acid Based Low‐Molecular‐Weight Ionogels as Efficient Dye‐Adsorbing Agents and Templates for the Synthesis of TiO2 Nanoparticles

The gelation of ionic liquids is attracting significant attention because of its large spectrum of applications across different disciplines. These ‘green solvents’ have been the solution to a number of common problems due to their eco‐friendly features. To expand their applications, the gelation of ionic liquids has been achieved by using amino acid‐based low‐molecular‐weight compounds. Variation of individual segments in the molecular skeleton of the gelators, which comprise the amino acid and the protecting groups at the N and C termini, led to an understanding of the structure–property correlation of the ionogelation process. An aromatic ring containing amino acid‐based molecules protected with a phenyl or cyclohexyl group at the N terminus were efficient in the gelation of ionic liquids. In the case of aliphatic amino acids, gelation was more prominent with a phenyl group as the N‐terminal protecting agent. The probable factors responsible for this supramolecular association of the gelators in ionic liquids have been studied with the help of field‐emission SEM, ¹H NMR, FTIR, and luminescence studies. It is the hydrophilic–lipophilic balance that needs to be optimized for a molecule to induce gelation of the green solvents. Interestingly, to maximize the benefits from using these green solvents, these ionogels have been employed as templates for the synthesis of uniform‐sized TiO₂ nanoparticles (25–30 nm). Furthermore, as a complement to their applications, ionogels serve as efficient adsorbents of both cationic and anionic dyes and were distinctly better relative to their organogel counterparts.     

Insights into the Formation and Structures of Molecular Gels by Diimidazolium Salt Gelators in Ionic Liquids or “Normal” Solvents

Insights are provided into the properties of molecular gels formed by diimidazolium salts both in “normal” solvents and ionic liquids. These materials can be interesting for applications in green and sustainable chemistry in which ionic liquids play a significant role, like catalysis and energy. In particular, two positional isomers of a diimidazolium cation have been examined with a wide range of anions for their ability to form gel phases. In particular, di‐, tri‐, and tetravalent anions bearing aliphatic or aromatic spacers were paired with the divalent cations. The properties of the organo‐ and ionogels formed have been analyzed by means of several different techniques, including calorimetry, rheology, resonance light scattering, UV/Vis absorption, polarizing optical microscopy, and powder X‐ray diffraction measurements. The investigations performed enabled us to obtain a wide range of conductive materials characterized by a high thermal stability and a low corrosiveness of the gelator (organogels) or of both gelator and solvent (ionogels). The information gained should be useful in the broader quest to identify and promote their applications.     

Ionogels: Squeeze flow rheology and ionic conductivity of quasi-solidified nanostructured hybrid materials containing ionic liquids immobilized on halloysite

Ionogels are hybrid ion-conducting materials consisting of ionic liquids stabilized by inorganic or polymer fillers and having good prospects for application in solid-state and flexible electronics and energy storage devices. The work presents the results of studying the rheological properties and ionic conductivity of a series of ionogels based on halloysite nanoclay and bis(trifluoromethylsulfonyl)imide ionic liquids with EMIm⁺, BMIm⁺, BM₂Im⁺, BMPyrr⁺, BMPip⁺ and MOc₃Am⁺ cations and content of the dispersion phase of 43–48%. The obtained values are compared with the analogous characteristics of bulk ionic liquids. It has been established that the IL cation structural characteristics affect the viscoplastic properties of ionogels subjected to uniaxial quasistatic compression (20 °C), ionic conductivity and structural resistance coefficient of an inorganic filler (from ?20 to +80 °C). Additive models of conductivity in binary systems are applied to obtain correlations linking ionic conductivity of ionogels with that of pure ionic liquids.     

Supramolecular Ionic‐Liquid Gels with High Ionic Conductivity

Supramolecular ionogels were prepared by the gelation of room‐temperature ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIm][BF₄]) with (S,S)‐bis(leucinol)oxalamide. Remarkably, the ionic conductivity of solutions and ionogels with low gelator concentrations is higher than that of neat [BMIm][BF₄]. On the basis of molecular dynamics simulations and quantum mechanical calculations, the origin of this phenomenon is attributed to the higher affinity of gelator molecules towards [BF₄]^? ions, which reduces the electrostatic attraction between [BMIm]⁺ and [BF₄]^? and thus increases their mobility. With increasing gelator concentration, the ionic conductivity decreases due to the formation of a denser gelator matrix, which hinders the pathways for ionic transport. However, even for very dense ionogels, this decrease is less than one order of magnitude relative to neat [BMIm][BF₄], and thus they can be classified as highly conductive materials with strong potential for application as functional electrolytes.     

Enhancing the Thermal Stability of Ionogels: Synthesis and Properties of Triple Ionic Liquid/Halloysite/MCC Ionogels

In this study, an ionic liquid (IL), 1-butyl-3-methylimidazolium acetate, was used to prepare ionogels with microcrystalline cellulose (MCC) and halloysite (Hal). SEM, XRD, TG, DSC, FTIR spectroscopy, conductometry and mechanical tests were used to study the morphology, structure, thermal behaviour and electrophysical and mechanical characteristics of synthesised ionogels. XRD analysis showed a slight decrease in the interlayer space of halloysite in ionogels containing MCC, which may have been associated with the removal of residual water molecules resulting from hydrophilic IL anions and polymer macromolecules. A change in conductivity and glass-transition temperature of the ionic liquid was revealed due to intercalation into halloysite (a confinement effect) and modification with cellulose. For triple IL/Hal/MCC ionogels, the characteristic thermal degradation temperatures were higher than the corresponding values for IL/Hal composites. This indicates that the synthesised IL/Hal/MCC ionogels are characterised by a greater thermal stability than those of IL/Hal systems.     

The Co‐Entrapment of a Homogeneous Catalyst and an Ionic Liquid by a Sol–gel Method: Recyclable Ionogel Hydrogenation Catalysts

Molecular hydrogenation catalysts have been co‐entrapped with the ionic liquid [Bmim]NTf₂ inside a silica matrix by a sol–gel method. These catalytic ionogels have been compared to simple catalyst‐doped glasses, the parent homogeneous catalysts, commercial heterogeneous catalysts, and Rh‐doped mesoporous silica. The most active ionogel has been characterised by transmission electron microscopy, X‐ray photoelectron spectroscopy, and solid state NMR before and after catalysis. The ionogel catalysts were found to be remarkably active, recyclable and resistant to chemical change.     

Luminescent Hybrid Ionogels Functionalized with rare Earth fluoride Up‐conversion Nanocrystals Dispersing in Ionic Liquid

Rare earth doped fluorides (BaMgF₄, aYF₄ and BaYF₅/BaLuF₅) have been synthesized and dispersed in an ionic liquid compound, (3‐triethoxysilyl) propyl‐3‐methylimidazolium chloride (denoted as IM⁺Cl ^? ). Through the cohydrolysis and copolycondensatoin reaction between the alkoxy group (3‐triethoxysilyl) of IM⁺ and tetraethoxysilane in the presence of carboxylic acids (formic acid) as catalyst and water source, luminescent hybrid ionogels form subsequently. ¹H NMR spectroscopy, X‐ray diffraction, transmission electron microscopy, scanning electron microscopy and especially up‐conversion (UC) luminescence spectroscopy are used to characterize the precursors and the resulted hybrid ionogels. These hybrid ionogels exhibit the UC luminescence properties of immobilized rare earth fluoride nanocrystals (BaMgF₄, NaYF₄ and BaYF₅/BaLuF₅) doped Er³⁺/Tm³⁺, Yb³⁺.     

The confinement and anion type effect on the physicochemical properties of ionic liquid/halloysite nanoclay ionogels

This work is the first attempt to study the physicochemical properties of ionogels - quasi-solid hybrid materials formed by ionic liquids (ILs) − 1-butyl-3-methylimidazolium (BMIm⁺) salts with dicyanamide- (DCA⁻), bis(trifluoromethylsulfonyl)imide- (TFSI⁻), and trifluoromethanesulfonate- (Otf⁻) anions - and halloysite, a powdered clay filler with nanotube particles (at the IL:Hal molar ratio of 2:1) in order to find possible new applications of ionic liquids and industrial minerals. The electron microscopy, TG, and DSC analysis, FTIR spectroscopy, X-ray diffraction analysis, conductometry and cyclic voltammetry methods are used to investigate the anion effect on the IL interaction with halloysite. It has, for the first time, been found that the distinguishing feature of halloysite interaction with an IL determining the structural changes in the clay mineral and electrochemical characteristics of the ionogels is partial dehydration of the clay and absorption of the released water by the ionic liquid. It is shown that the halloysite dehydration effect depends on the IL hydrophilicity determined by the anion type, corresponds to the series: BMImDCA > BMImOtf > BMImTFSI. The electrochemical and thermal behaviour of ILs confined within a halloysite matrix differs from that of bulk ILs and is controlled by the anion type. Temperature dependences of the structural resistance of the halloysite filler are radically different for the ILs with high and low hydrophilicity. The effects resulting from the formation of halloysite-based ionogels can be of interest to those who develop quasi-solid ionic conductors that can work within a wide temperature range.     

Metallosurfactant Ionogels in Imidazolium and Protic Ionic Liquids as Precursors To Synthesize Nanoceria as Catalase Mimetics for the Catalytic Decomposition of H2O2

The gelation behavior of cationic surfactants with different counterions, Br^?, [FeCl₃Br]^?, and [CeCl₃Br]^?, in imidazolium ionic liquids (ILs) and protic ethylammonium nitrate was investigated. Small‐angle X‐ray scattering measurements and freeze‐fracture transmission electron microscopy observations revealed the lamellar phases of metallosurfactant ionogels. The characteristics of imidazolium ILs, including the size and type, have effects on metallosurfactant ionogel properties, such as transformation temperatures, interlayer spacing, and mechanical strength. Cubic fluorite structured cerium oxide nanoparticles (CeO₂ NPs) were produced by using metallosurfactant ionogels as precursors. Cubic fluorite CeO₂ exhibited good catalase mimetic activity toward H₂O₂ to generate O₂, providing more multiple mimetic enzyme activities of CeO₂ NPs for H₂O₂.     

Low density ionogels obtained by rapid gellification of tetraethyl orthosilane assisted by ionic liquids

A non-hydrolytic one pot sol-gel method has been used to synthesize mesoporous silica ionogels with the confined ionic liquid (IL) 1-ethyl 3-methyl imidazolium tetra fluoro-borate [EMIM][BF(4)]. The precursor for obtaining the SiO(2) matrix was tetraethyl orthosilicate (TEOS) and formic acid was used as a catalyst. These ionogels have been characterized by density measurements, TEM, BET, DSC, TGA and FTIR. The incorporation of the ionic liquid [EMIM][BF(4)] enhances the gellification rate which results in the ionogels having very low density (~0.3 g cm(-3)). The low density has been explained on the basis of the creation of 'blind embedded pores' in the matrix (apart from open pores) due to very rapid gellification (~1 min). Morphological studies provide experimental evidence for the presence of blind pores/voids inside the ionogel ingots. We have also shown that the IL entrapped in nanopores (~7-8 nm pore size) of the SiO(2) matrix has different physical properties than the bulk IL viz. (a) the phase transition temperatures (T(g), T(c) and T(m)) of the IL change upon confinement, (b) the thermal stability reduces upon confinement, and (c) the pore wall interaction with the IL results in changes in the C-H vibrations of the imidazolium ring and alkyl chain (the former increasing) which is also indicated in our DFT-calculation.     

A route to heat resistant solid membranes with performances of liquid electrolytes

The confinement of ionic liquids within a porous silica matrix was performed by a one-step non-hydrolytic sol-gel route, leading to hybrid materials (called "ionogels") featuring both the mechanical and transparency properties of silica gels and the high ionic conductivity and thermal stability of ionic liquids.     

Anisotropic ionogels of sodium laurate in a room-temperature ionic liquid

Anisotropic thermally reversible ionogels of sodium laurate (SL) were prepared in the first discovered room-temperature ionic liquid (RTIL), ethylammonium nitrate (EAN). Polarized optical microscope images indicate that the gels are birefringent, illuminating the presence of anisotropic structures. Small-angle X-ray scattering results reveal that SL and lauric acid (LA) molecules are arranged to form lamellar structures, but no SL crystallites were confirmed by the X-ray diffraction measurements. With an increase of the SL concentration, the interlayer distance decreases. Rheological measurements indicate that the anisotropic ionogels are highly viscoelastic and the storage modulus (G') increases with an increase of the SL concentration in EAN. Electrochemical measurements indicate that the anisotropic ionogels may have potential applications in electrochemical fields. The intermolecular hydrogen bond as well as the solvatophobic interaction of SL and LA formed by a chemical reaction, CH(3)(CH(2))(10)COONa + CH(3)CH(2)NH(3)NO(3) --> CH(3)CH(2)NH(2) upward arrow + NaNO(3) downward arrow + CH(3)(CH(2))(10)COOH, can play a role in the formation of three-dimensional networks having lamellar structures which are responsible for the anisotropic ionogels. The formation of anisotropic ionogels by surfactants in RTILs could be a new phenomenon, but this is not a very classic case of organogels.     

Preparation,characterization and luminescence of transparent thin film of ionogels

The sol–gel fabrication of luminescent and transparent thin film of ionogels containing trivalent lanthanide complexes have been obtained from the silylated ionic liquid in the presence of lanthanide salts (Ln³⁺, Ln=Tb and Eu) and organic ligands. The resulting thin films were investigated by FT-IR spectroscopy, scanning electron microscopy and luminescence spectroscopy. FT-IR spectra reveal the hydrolysis and condensation of the silylated ionic liquid as well as the formation of luminescent lanthanide complexes in the thin films. Scanning electronic microscope images show the homogeneous characteristic of the thin films.     

Use of ionic liquids in sol-gel; ionogels and applications

The current strong interest in ionic liquids is motivated by their unique combination of properties such as negligible vapour pressure, thermal stability, non-flammability, high ionic conductivity and wide electrochemical stability window. The first part of this short review deals with all the specific aspects of sol-gel in the presence of ionic liquid, which can act as drying control chemical additive, catalyst, porogenous agent and solvent or co-solvent. The second part is devoted to the properties of the gels in which the ionic liquid is kept confined (ionogels) and their applications as electrolyte membranes, optical devices, catalysts and sensors.     

Chain confinement promotes β-phase formation in polyfluorene-based photoluminescent ionogels

The synthesis of photoluminescent conjugated polymer silica ionogels using sol-gel chemistry is described. Cooperative self-assembly of an ionic liquid, the silica precursor and poly(9,9-dioctylfluorene) (PFO) via hydrogen bonding and π-stacking interactions drives formation of the PFO β-phase.     

Ionogels encompassing ionic liquid with liquid like performance preferable for fast solid state electrochromic devices

Novel ionogels encompassing an ionic liquid encaged in an inorganic matrix were synthesized by sol–gel chemistry. The ability of these highly conducting ionogels (∼10⁻² S cm⁻¹ at 25 °C) to act as liquid electrolytes in spite of their solid form has been exploited in inorganic electrochromic devices based on tungsten oxide and Prussian blue electrodes. These devices exhibit extremely fast switching kinetics and make it the best and only candidate for the realization of fast all solid state electrochromic devices.