Thin‐layer chromatography—an image‐processing method for the determination of acidic catecholamine metabolites

A sensitive and convenient method for acidic catecholamine metabolites (including homovanillic acid, vanillylmandelic acid, 3,4‐dihydroxymandelic acid, and 3,4‐dihydroxyphenylacetic acid) determination was developed based on thin‐layer chromatography and image‐processing analysis. The metabolites were separated without a prederivatization step using reversed phase RP‐18W high‐performance plates. The mobile phase composition, detection, and quantification conditions were systematically investigated through several trials. The reaction with 2,2‐diphenyl‐1‐picrylhydrazyl radical allowed specific detection of acidic catecholamine metabolites with a high sensitivity and a wide linear range. The limit of detection and the limit of quantification were in the range of 13–103 and 18–120 ng/spot, respectively, in all cases. Mean recoveries determined were in the range 95–106% for all of the investigated compounds. The proposed method allowed rapid simultaneous determination of acidic catecholamine metabolites from spiked human urine sample.     

Multiobjective optimization strategy based on desirability functions used for the microemulsion liquid chromatographic separation and quantification of norfloxacin and tinidazole in plasma and formulations

The aim of the present study was to optimize a microemulsion liquid chromatography method for the simultaneous determination of norfloxacin and tinidazole binary mixture using a chemometric protocol. Optimization experiments were conducted through a process of screening and optimization. A 2^7‐4 fractional factorial design was used as screening design. While the location of optimum conditions was established by applying Derringer's desirability function. The optimal mobile phase composition was predicted to be: 3.5% w/v SDS, 10.03% v/v 1‐propanol, 0.5% v/v 1‐octanol, and 0.3% triethylamine in 0.02 M phosphoric acid at pH 6.5. The mobile phase was delivered isocratically at a flow rate of 1 mL/min with UV detection at 290 nm. Tinidazole and norfloxacin were eluted with retention times of 1.8 and 5.8 min, respectively. The calibration plots displayed good linear relationships in the concentration ranges of 0.5–50 and 0.75–75 μg/mL for norfloxacin and tinidazole, respectively. The method was successfully applied for determination of both drugs in pharmaceutical dosage forms and real human plasma. Where the accuracy was proved by the low values of % error and high values of recovery, also the relative standard deviation for the results did not exceed 1.5%, proving the precision of the method.     

Development and validation of TLC‐densitometric method for determination of lipid A adjuvant as a bulk and in solid fat nanoemulsions

A simple, sensitive, selective and precise high‐performance thin‐layer chromatographic method was developed for determination of lipid A (MPLA) adjuvant as a bulk and in solid fat nanoemulsions. Chromatographic separations were performed on thin‐layer chromatography aluminum plates precoated with silica gel 60 F‐254 as stationary phase and chloroform–methanol–ethyl acetate solution (10:2:4, v/v/v) as mobile phase. With this solvent system, compact spots for MPLA at R_f value 0.80 ± 0.02 were obtained. Densitometric analysis of MPLA was carried out in absorbance mode at 357 nm. Linear regression analysis for the calibration plots showed good linear relationship with r = 0.9996 in the concentration range of 20–100 ng/spot. The mean values (±SD) of slope and intercept were found to be 7.355 ± 0.006 and 109.52 ± 0.170, respectively. Limits of detection (LOD) and quantitation (LOQ) were observed at 3.096 and 9.382 ng/spot, respectively.The method was validated for precision, accuracy, robustness and recovery as per the International Conference on Harmonization guidelines. Statistical analysis proved that the developed method for quantification of MPLA as a bulk and in solid fat nanoemulsions is reproducible, selective and economical. This method could be applied for quantitative assay of MPLA in lipid‐based vaccine formulations. Copyright © 2015 John Wiley & Sons, Ltd.     

Development of a highly sensitive high‐performance thin‐layer chromatography method for the screening and simultaneous determination of sofosbuvir,daclatasvir, and ledipasvir in their pure forms and their different pharmaceutical formulations

The combination of sofosbuvir and daclatasvir or sofosbuvir and ledipasvir is now widely used as an ideal treatment for hepatitis C virus infection. For this purpose, a simple, sensitive, accurate, economic, and precise high‐performance thin‐layer chromatography was developed and validated for the determination of sofosbuvir, daclatasvir, and ledipasvir in their pure form as well as their different pharmaceutical products. The method used Merck high‐performance thin‐layer chromatography aluminum plates precoated with silica gel 60 F254 as a stationary phase and mobile phase consisting of methylene chloride/methanol/ethyl acetate/ammonia (25%) (6:1:4:1, v/v/v/v). This system was found to give compact symmetric peaks of sofosbuvir, daclatasvir, and ledipasvir with retardation factors of 0.27 ± 0.01, 0.50 ± 0.007, and 0.68 ± 0.008, respectively. The densitometric scanner was set at 275 nm using a deuterium lamp. The calibration curves were linear over the range of 100–3000 ng/spot for sofosbuvir, and daclatasvir, and range of 50–3000 ng/spot for ledipasvir. The detection limits were 22.5, 31.90, and 15.80 for sofosbuvir, daclatasvir, and ledipasvir. The quantitation limits were 67.50, 95.60, and 47.50 for sofosbuvir, daclatasvir, and ledipasvir. The proposed method was validated according to International Conference on Harmonization (ICH) guidelines and the results were acceptable.     

Hydrophobic‐hydrophilic monolithic dual‐phase layer for two‐dimensional thin‐layer chromatography coupled with surface‐enhanced Raman spectroscopy detection

Hydrophobic‐hydrophilic monolithic dual‐phase plates have been prepared by a two‐step polymerization method for two‐dimensional thin‐layer chromatography of low‐molecular‐weight compounds, namely, several dyes. The thin 200 μm poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) layers attached to microscope glass plates were prepared using a UV‐initiated polymerization method within a simple glass mold. After cutting and cleaning the specific area of the layer, the reassembled mold was filled with a polymerization mixture of butyl methacrylate and ethylene dimethacrylate and subsequently irradiated with UV light. During the second polymerization process, the former layer was protected from the UV light with a UV mask. After extracting the porogens and hydrolyzing the poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) area, these two‐dimensional layers were used to separate a mixture of dyes with great difference in their polarity using reversed‐phase chromatography mode within the hydrophobic layer and then hydrophilic interaction chromatography mode along the hydrophilic area. In the latter dimension only the specific spot was developed further. Detection of the separated dyes could be achieved with surface‐enhanced Raman spectroscopy.     

A novel method for the preconcentration and determination of ampicillin using electromembrane microextraction followed by high‐performance liquid chromatography

Electromembrane extraction was used with high‐performance liquid chromatography for preconcentration and determination of ampicillin residues in cow milk. Ampicillin is transferred from an aqueous solution through a thin layer containing octan‐1‐ol, silver nanoparticles, and reduced graphene oxide which serves as a supported liquid membrane. Inside the fiber impregnated with supported liquid membrane mixture was filled 10 µL of an acceptor phase. Experimental parameters were optimized for extraction efficiency of ampicillin. Under the optimized conditions, the proposed method provided acceptable linear range (2–100 µg/L), satisfactory repeatability (RSD% < 7.1), low limit of detection (0.6 µg/L), and a high enrichment factor (295) corresponding to extraction recovery of 37%. Consequently, the proposed method was successfully applied for the determination of ampicillin residues in different cow milks.     

Simple thin layer chromatography–ultraviolet spectrophotometric method for quality assessment of binary fixed‐dose‐combinations of lamivudine/tenofovir disoproxil fumarate and lamivudine/zidovudine in tablet formulations

Antiretroviral fixed‐dose‐combination drugs are best assayed with high‐performance liquid chromatography, or liquid chromatography–tandem mass spectrometry. However, most scientists in developing nations have no access to these expensive instruments. A more affordable quantitative technique is the use of ultraviolet–visible spectroscopy—where often the absorption spectra of these antiretrovirals are overlapping; thus complex derivative methodologies are required for quantification. A simple, rapid, and accurate thin layer chromatography–ultraviolet spectrophotometric method for the quantification of binary mixtures of lamivudine, zidovudine, and tenofovir–disoproxil–fumarate in tablet formulations was developed. Lamivudine/tenofovir–disoproxil–fumarate and lamivudine/zidovudine were extracted and separated on glass thin‐layer chromatography plates. Drugs were identified in ultraviolet light at 254 nm and quantified in acidic medium using ultraviolet spectrophotometry. The retardation factors were 0.43, 0.79, and 0.81 for lamivudine, tenofovir–disoproxil–fumarate, and zidovudine, respectively, with corresponding absorption maxima at 270, 260, and 265 nm. Linearity ranged from 1 to 40 µg/mL for all drugs (R = 0.9998–0.9999), while recovery studies were 95.10–102.11% and amount in formulations ranged from 97.99 ± 0.63 to 101.47 ± 2.39%. The paired t‐test (n = 5) indicated no significant difference between the proposed and high‐performance liquid chromatography methods, hence comparable and can be used as an alternative method in routine quality determination of antiretroviral medicines.     

An approach to analysis of primary amines by a combination of thin‐layer chromatography and matrix‐assisted laser desorption ionization mass spectrometry in conjunction with post‐chromatographic derivatization

On‐spot derivatization has been suggested for the modification of primary amine containing compounds for their analysis by thin‐layer chromatography hyphenated with matrix‐assisted laser desorption ionization mass spectrometry. The proposed approach was based on post‐chromatographic treatment of separated analytes inside the chromatographic zones on the thin‐layer chromatography plates by tris(2,6‐dimethoxyphenyl)methilium reagent. The derivatives, containing permanent positive charge, reveal exceptionally intense peaks of their cationic moieties and high signal/noise ratio in mass spectra recorded directly from the plates. The method was tested on a series of aliphatic, aromatic, and amine‐containing pharmaceuticals.     

Separation and determination of rofecoxib and its degradation products by TLC chromatography

A thin layer chromatography with densitometry method for the determination of rofecoxib and degradation products is described. The chromatographic separation was performed on silica gel TLC plates as a stationary phase and chloroform-acetone-toluene-glacial acetic acid (12: 5: 2: 0.1, v/v/v/v) as a mobile phase. Densitimetric detection was carried out at 256 nm. The method is of high sensitivity and low LOD and LOQ: from 0.35 μg/spot to 1.05 μg/spot. The recovery was satisfactory at 98.62%. In addition, the stability of rofecoxib in solutions was investigated, including an effect of solution pH, temperature and incubation time. The method is rapid, easy and selective, particularly for the analysis of rofecoxib formulations. The article is published in the original.     

Quantitative determination of fluoxetine in human serum by high performance thin layer chromatography

A high performance thin layer chromatographic method was developed and validated for the quantification of fluoxetine in human serum. Fluoxetine was extracted by liquid–liquid extraction method with diethyl ether as extraction solvent. Imipramine was used as internal standard. The chromatographic separation was achieved on precoated silica gel F 254 high performance thin layer chromatographic plates using a mixture of toluene/acetic acid glacial (4:5 v/v) as mobile phase. 4‐Dimethylamino‐azobenzene‐4‐sulphonyl chloride was used as derivatization reagent. Densitometric detection was done at 272 nm. The method was linear between 12.5 and 87.5 ng/spot, corresponding to 0.05 and 0.35 ng/μL of fluoxetine in human serum after extraction process and applying 25 μL to the chromatographic plates. The method correlation coefficient was 0.999. The intra‐assay and inter‐assay precisions, expressed as the RSD, were in the range of 0.70–2.01% (n=3) and 0.81–3.90% (n=9), respectively. The LOD was 0.23 ng, and the LOQ was 0.70 ng. The method proved be accurate, with a recovery between 94.75 and 98.95%, with a RSD not higher than 3.61% and was selective for the active principle tested. This method was successfully applied to quantify fluoxetine in patient serum samples. In conclusion, the method is useful for quantitative determination of fluoxetine in human serum.     

Evaluation of thin layer chromatography—Fast atom bombardment mass spectrometry: Application to the determination of midazolam intoxication by use of 3-glycidoxypropyl-treated thin layer chromatographic plates

Summary The effectiveness of 3-glycidoxypropyl-treated thin layer chromatographic plates in the determination of midazolam intoxication has been studied by thin layer chromatography/fast atom bombardment mass spectrometry. Silica plates treated with 3-glycidoxypropyldimethylethoxysilane were used for the measurement of their physical composition and for chemical analysis. From elemental carbon analysis data, the maximum number of bonded 3-glycidoxypropyl surface groups per gram was calculated to be 0.417×10²¹. Midazolam in human serum from patients suffering from intoxication could be separated on a 3-glycidoxypropyl-treated thin layer chromatographic plate with chloroform as eluent. After applying the technique of diffused spot condensation on the 3-glycidoxypropyl-treated thin layer chromatographic plate, the established thin layer chromatography/fast atom bombardment mass spectrometry method was used for the identification of midazolam intoxication, and improved the detection limit for midazolam in the serum of an intoxication patient by 30 times.     

Resolution and isolation of enantiomers of (±)‐isoxsuprine using thin silica gel layers impregnated with l‐glutamic acid,comparison of separation of its diastereomers prepared with chiral derivatizing reagents having l‐amino acids as chiral auxiliaries

Thin silica gel layers impregnated with optically pure l ‐glutamic acid were used for direct resolution of enantiomers of (±)‐isoxsuprine in their native form. Three chiral derivatizing reagents, based on DFDNB moiety, were synthesized having l ‐alanine, l ‐valine and S‐benzyl‐l ‐cysteine as chiral auxiliaries. These were used to prepare diastereomers under microwave irradiation and conventional heating. The diastereomers were separated by reversed‐phase high‐performance liquid chromatography on a C₁₈ column with detection at 340 nm using gradient elution with mobile phase containing aqueous trifluoroacetic acid and acetonitrile in different compositions and by thin‐layer chromatography (TLC) on reversed phase (RP) C₁₈ plates. Diastereomers prepared with enantiomerically pure (+)‐isoxsuprine were used as standards for the determination of the elution order of diastereomers of (±)‐isoxsuprine. The elution order in the experimental study of RP‐TLC and RP‐HPLC supported the developed optimized structures of diastereomers based on density functional theory. The limit of detection was 0.1–0.09 µg/mL in TLC while it was in the range of 22–23 pg/mL in HPLC and 11–13 ng/mL in RP‐TLC for each enantiomer. The conditions of derivatization and chromatographic separation were optimized. The method was validated for accuracy, precision, limit of detection and limit of quantification. Copyright © 2014 John Wiley & Sons, Ltd.     

Simultaneous quantification of diterpenoids in Premna integrifolia using a validated HPTLC method

A sensitive, selective and robust densitometric high‐performance thin layer chromatographic method was developed and validated for the determination of diterpenoids in the root bark of Premna integrifolia. Diterpenoids 1β,3α,8β‐trihydroxy‐pimara‐15‐ene ( A ), 6α,11,12,16‐tetrahydroxy‐7‐oxo‐abieta‐8,11,13‐triene ( B ) and 2α,19‐dihydroxy‐pimara‐7,15‐diene ( C ) were used as chemical markers for the standardization of P. integrifolia plant extracts. The separation was performed on silica gel 60F₂₅₄ high‐performance thin layer chromatography plates using hexane/acetone/ethylacetate (60:20:20 v/v) as mobile phase. The quantitation of diterpenoids was carried out using densitometric reflection/absorption mode at 475 nm after post‐chromatographic derivatization using vanillin–sulfuric acid reagent. A precise and accurate quantification can be performed for compounds A , B and C in the linear working concentration range of 1–10 μg/spot with good correlations (r²=0.9985, 0.9996 and 0.9992, respectively). The method was validated for peak purity, precision, robustness, limit of detection (LOD) and quantitation (LOQ) etc., as per the International Conference on Harmonization (ICH) guidelines. Specificity of quantitation was confirmed using retention factor (R_f) and spectra correlation of markers in standard and sample tracks. The method reported here is simple and reproducible which may be applied for quantitative analysis of above diterpenoids in the root bark of P. integrifolia.     

Determination of chlorogenic acid,polyphenols and antioxidants in green coffee by thin‐layer chromatography,effect‐directed analysis and dot blot – comparison to HPLC and spectrophotometry methods

The great prevalence of thin‐layer chromatography over high‐performance liquid chromatography is connected with the possibility of analyzing many samples in parallel. Therefore, the method is often used in screening and/or effect directed analysis to compare composition and chemical/biological properties of many samples in one run. It was already proved, that high performance thin‐layer chromatography, in many cases, can replace high‐performance liquid chromatography for quantitative analysis. The main aim of the paper is to show that simple thin‐layer chromatography can also be used as a quantitative or at least as a semi‐quantitative method, even when it concerns effect directed analysis e.g. direct bioautography. Chlorogenic acid content was measured in four methanol extracts of various green coffees and in one extract of black coffee using thin‐layer chromatography with ultraviolet detection and thin‐layer chromatography with effect directed detection. High‐performance liquid chromatography was used as a reference method. Additionally, total contents of polyphenols and antioxidants were estimated using thin‐layer chromatography or dot‐blot on chromatography plates. These results were compared to spectrophotometric methods. It was proved that thin‐layer chromatography can be used as a quantitative (using densitometry) or semi‐quantitative method (using other detection methods including effect directed detection) as well as for estimating total antioxidants or polyphenols content.     

Development of off-line layer chromatographic and total reflection X-ray fluorescence spectrometric methods for arsenic speciation

Rapid and low cost off-line thin layer chromatography–total reflection X-ray fluorescence spectrometry and overpressured thin layer chromatography–total reflection X-ray fluorescence spectrometry methods have been developed for separation of 25 ng of each As(III), As(V), monomethyl arsonic acid and dimethylarsinic acid applying a PEI cellulose stationary phase on plastic sheets and a mixture of acetone/acetic acid/water = 2:1:1 (v/v/v) as eluent system. The type of eluent systems, the amounts (25–1000 ng) of As species applied to PEI cellulose plates, injection volume, development distance, and flow rate (in case of overpressured thin layer chromatography) were taken into consideration for the development of the chromatographic separation. Moreover, a microdigestion method employing nitric acid for the As spots containing PEI cellulose scratched from the developed plates divided into segments was developed for the subsequent total reflection X-ray fluorescence spectrometry analysis. The method was applied for analysis of root extracts of cucumber plants grown in As(III) containing modified Hoagland nutrient solution. Both As(III) and As(V) were detected by applying the proposed thin layer chromatography/overpressured thin layer chromatography–total reflection X-ray fluorescence spectrometry methods.     

Stability‐indicating chromatographic methods for determination of flecainide acetate in the presence of its degradation products; isolation and identification of two of its impurities

In this work, two stability‐indicating chromatographic methods have been developed and validated for determination of flecainide acetate (an antiarrhythmic drug) in the presence of its degradation products (flecainide impurities; B and D). Flecainide acetate was subjected to a stress stability study including acid, alkali, oxidative, photolytic and thermal degradation. The suggested chromatographic methods included the use of thin layer chromatography (TLC‐densitometry) and high‐performance liquid chromatography (HPLC). The TLC method employed aluminum TLC plates precoated with silica gel G.F₂₅₄ as the stationary phase and methanol–ethyl acetate–33% ammonia (3:7:0.3, by volume) as the mobile phase. The chromatograms were scanned at 290 nm and visualized in daylight by the aid of iodine vapor. The developed HPLC method used a RP‐C₁₈ column with isocratic elution. Separation was achieved using a mobile phase composed of phosphate buffer pH 3.3–acetonitrile–triethylamine (53:47:0.03, by volume) at a flow rate of 1.0 mL/min and UV detection at 292 nm. Factors affecting the efficiency of HPLC method have been studied carefully to reach the optimum conditions for separation. The developed methods were validated according to the International Conference on Harmonization guidelines and were applied for bulk powder and dosage form. Copyright © 2016 John Wiley & Sons, Ltd.     

Development and validation of high-performance thin-layer chromatographic method for determination of amygdalin

ABSTRACT

A new method for the extraction and quantitative determination of amygdalin has been proposed. Accelerated solvent extraction was applied for the extraction, and reversed-phase high-performance thin-layer chromatography method was developed, validated, and applied for the determination of amygdalin in the extracts of apricot, plum, almond, and peach kernels. The chromatographic system used was RP-18 silica, as stationary phase and acetonitrile/water (50:50, v/v), as mobile phase. Densitometric scanning was performed at 210 nm. The method was validated with respect to specificity, linearity, precision, and accuracy. The results showed that the peak area responses were linear within the concentration range of 2.5–50.0 µg/spot (R² = 0.9984). The limit of quantification was 4.28 µg/spot, and the detection limit 1.28 µg/spot. The intra-day and inter-day reproducibility, in terms of %RSD, were in the range of 0.81–1.15 and 1.32–1.89, respectively. The accuracy data were in the range from 99.98 to 100.56%. The method is linear, quantitative and reproducible, and could be used as an efficient and economical green chromatographic procedure for the determination of amygdalin in the fruit kernel.     

Stability indicating methods for the determination of norfloxacin in mixture with tinidazole

Three stability indicating assay methods are developed for the determination of norfloxacin (Nor) in the presence of its decarboxylated degradation product and in mixture with tinidazole (Tnd). The proposed methods are reversed phase ion pair liquid chromatography (LC), thin layer densitometry (TLC) and second derivative ratio spectra zero crossing spectrophotometry ((2)DD). Chromatographic separation was achieved on mu-Bondapack C18 column 5 microm (300 mm x 3.9 mm, I.D.) and precoated silica gel TLC stationary phases for LC and TLC methods, respectively. Mobile phases consisting of phosphate buffer pH 3.2 : methanol (3 : 1, v/v) containing 0.005 M pentane sulfonic acid sodium salt and isopropanol : butanol : concentrated ammonia : water (25 : 50 : 5 : 25, v/v/v/v) were used for resolution of Nor and Tnd by both techniques, respectively. Detection was carried at 280 nm. In the ratio spectra method, detection of Nor was carried at 282 nm. Linearity, accuracy and precision were found to be acceptable over concentration ranges of 20-225 microg/ml, 0.8-4 microg/spot and 1-7 microg/ml for Nor by LC, TLC and (2)DD methods and over concentration ranges of 37.5-375 microg/ml and 4.8-20 microg/spot for Tnd by LC and TLC methods respectively. The suggested methods were successfully applied for the determination of both drugs in bulk powder, laboratory prepared mixtures and in commercial samples. Statistical comparison between the results obtained by the proposed and the reference methods was carried out using Student t-test, F ratio and one way ANOVA.     

Development and Validation of HPLC,TLC and Derivative Spectrophotometric Methods for the Analysis of Ezetimibe in the Presence of Alkaline Induced Degradation Products

Reversed phase‐high performance liquid chromatography (RP‐HPLC), thin layer chromatography (TLC) densitometry and first derivative spectrophotometry (1D) techniques are developed and validated as a stability‐indicating assay of ezetimibe in the presence of alkaline induced degradation products. RP‐HPLC method involves an isocratic elution on a Phenomenex Luna 5μ C₁₈ column using acetonitrile: water: glacial acetic acid (50:50:0.1 v/v/v) as a mobile phase at a flow rate of 1.5 mL/min. and a UV detector at 235 nm. TLC densitometric method is based on the difference in Rf‐values between the intact drug and its degradation products on aluminum‐packed silica gel 60 F₂₅₄ TLC plates as stationary phase with isopropanol: ammonia 33% (9:1 v/v) as a developing mobile phase. On the fluorescent plates, the spots were located by fluorescence quenching and the densitometric analysis was carried out at 250 nm. Derivative spectrophotometry, the zero‐crossing method, ezetimibe was determined using first derivative at 261 nm in the presence of its degradation products. Calibration graphs of the three suggested methods are linear in the concentration ranges 1–10 mcg/mL, 0.1–1 mg/mL and 1–16 mcg/mL with a mean percentage accuracy of 99.05 ± 0.54%, 99.46 ± 0.63% and 99.24 ± 0.82% of bulk powder, respectively. The three proposed methods were successfully applied for the determination of ezetimibe in raw material and pharmaceutical dosage form; the results were statistically analyzed and compared with those obtained by the reported method. Validation parameters were determined for linearity, accuracy and precision; selectivity and robustness and were assessed by applying the standard addition technique.     

Influence of pH and organic modifiers on the dissociation constants of selected drugs using reversed‐phase thin‐layer chromatography: Comparison with other techniques and computational tools

Knowledge of the acid–base dissociation constants of drugs is the key to understanding their biopharmaceutical characteristics. In the present work, the effect of pH and organic modifiers (acetonitrile and methanol) was investigated in the determination of dissociation constants (pK_a) of nine representative drugs (atenolol, betahistine, clarithromycin, deferiprone, diclofenac, ibuprofen, metoprolol, naproxen and propranolol) using reversed‐phase thin‐layer chromatography. Mobile phase consisting of various buffers and methanol–acetonitrile (10, 20, 30, 40, 50 and 60%, v/v) was used to evaluate the retention pattern on reversed‐phase plates. Compared with methanol, acetonitrile gave better results for the experimentally determined pK_a values by extrapolation to zero organic modifier volume fractions. To assess the effectiveness of the developed method the results were correlated using principal component analysis and hierarchical cluster analysis. The calculated values of the aqueous dissociation constant were compared with those reported previously using potentiometry and capillary electrophoresis and also with different computational platforms like ACD/Lab, ChemAxon and Jchem calculator. The results obtained by the RPTLC method were in good agreement with potentiometric methods for pK_a determination.