Fluorescent quantum dots for microbial imaging

QDs (Semiconductor QDs, CDs, SiQDs, and Pdots) are used in imaging microorganisms including viruses, bacteria, and fungi.     

Valence‐Engineering of Quantum Dots Using Programmable DNA Scaffolds

Precise control over the valency of quantum dots (QDs) is critical and fundamental for quantitative imaging in living cells. However, prior approaches on valence control of QDs remain restricted to single types of valences. A DNA‐programmed general strategy is presented for valence engineering of QDs with high modularity and high yield. By employing a series of programmable DNA scaffolds, QDs were generated with tunable valences in a single step with near‐quantitative yield (>95 %). The use of these valence‐engineered QDs was further demonstrated to develop 12 types of topologically organized QDs‐QDs and QDs‐AuNPs and 4 types of fluorescent resonance energy transfer (FRET) nanostructures. Quantitative analysis of the FRET nanostructures and live‐cell imaging reveal the high potential of these nanoprobes in bioimaging and nanophotonic applications.     

Preparation of High‐Performance Water‐Soluble Quantum Dots for Biorecognition through Fluorescence Resonance Energy Transfer

An improved method for the synthesis of high‐performance and water‐soluble quantum dots (QDs) involving the encapsulation of mercaptosuccinic acid coated QDs (MSA‐QDs) with poly(diallyldimethylammonium chloride) (PDDA) followed by their direct photoactivation with fluorescent radiation near 295 K to yield PDDA‐coated QDs (PDDA‐QDs) has been demonstrated. The quantum yield (QY) of the PDDA‐QDs was significantly improved from 0.6 (QY of MSA‐QDs) to 48 %. By using this synthetic strategy, highly photoluminescent PDDA‐QDs of varied size were readily prepared. The surface properties of PDDA‐QDs and MSA‐QDs were extensively characterized. The highly luminescent and positively charged PDDA‐QDs serve as a useful and convenient tool for protein adsorption. With a Δ⁵‐3‐ketosteroid isomerase adsorbed PDDA‐QD complex, the biorecognition of steroids was demonstrated through the application of fluorescent resonance energy transfer.     

水溶性量子点的制备及应用

高量子产率的水溶性量子点在众多领域如发光晶体、薄膜光激发器件,尤其是生物荧光标记中展现出巨大的潜在应用价值.量子点荧光明亮、稳定,激发光谱宽,发射光谱窄,且发射波长可通过改变材料的粒径大小和组成来调控,因而在生物样本尤其是活组织的多色成像中极为有用,能有效避免因样本自身发光和光散射导致的信号干扰.量子点的研究已成为一门新兴的交叉科学,是目前最有吸引力的研究领域之一.近年来,水溶性量子点作生物荧光标记物的研究取得了长足的进展.本文简述了量子点的结构特征及光学特性,重点综述了水溶性量子点的制备方法及应用研究进展,特别是它在生物、医学中作荧光探针的最新研究.     

The Application of Amine‐Terminated Silicon Quantum Dots on the Imaging of Human Serum Proteins after Polyacrylamide Gel Electrophoresis (PAGE)

Novel amine‐terminated silicon (Si) quantum dots (QDs) were synthesized and applied for the detection of human serum proteins on gels directly after polyacrylamide gel electrophoresis (PAGE). The diameter of these stable amine‐terminated Si QDs was in the range of 0.5–2.0 nm. In this study, the fluorescent imaging conditions, such as the buffer solution, pH value, buffer concentration and quantity of Si QDs, were optimized and the possible mechanisms of Si QDs–protein interaction were analyzed. The mode of Si QDs and human serum albumin association was found to occur by hydrogen bond interactions; this was probably attributed to the interaction between the amino group of amine‐terminated Si QDs and the carboxyl group of proteins. Meanwhile, human serum proteins separated by native 1D and native 2D electrophoresis were detected by Si QD‐based fluorescent imaging. Some proteins, such as isoform 1 of α‐1‐antitrypsin, complement C3 (Fragment) and hemopexin, which were identified by mass spectrometry (MS), were easily detected by using Si QDs, but not with CBB‐R250 staining. The Si QDs‐based fluorescent imaging technique with high resolution is a sensitive and dependable method for direct detection of human serum proteins, and has enormous potential in clinical diagnosis.     

Synthesis of Chlorine‐Substituted Graphdiyne and Applications for Lithium‐Ion Storage

Chlorine‐substituted graphdiyne (Cl‐GDY) is prepared through a Glaser–Hay coupling reaction on the copper foil. Cl‐GDY is endowed with a unique π‐conjugated carbon skeleton with expanded pore size in two dimensions, having graphdiyne‐like sp‐ and sp²‐ hybridized carbon atoms. As a result, the transfer tunnels for lithium (Li) ions in the perpendicular direction of the molecular plane are enlarged. Moreover, benefiting from the bottom‐to‐up fabrication procedure of graphdiyne and the strong chemical tailorability of the alkinyl‐contained monomer, the amount of substitutional chlorine atoms with appropriate electronegativity and atom size is high and evenly distributed on the as‐prepared carbon framework, which will synergistically stabilize the Li intercalated in the Cl‐GDY framework, and thus generate more Li storage sites. Profiting from the above unique structure, Cl‐GDY shows remarkable electrochemical properties in lithium ion half‐cells.     

Preparation of Fluorescent Thiol Group‐Functionalized Silica Microspheres for the Detection and Removal of Silver Ions in Aqueous Solutions

We demonstrate that silica microspheres can act as a sensitive fluorescent sensor and adsorbent of Ag⁺ in aqueous media. These thiol‐functionalized silica microspheres are doped with quantum dots (QDs) using organosilane chemistry in a one‐step preparation. Ligand exchange takes place between the thiolated organosilane and acid‐capped QDs, making the doping easy. Ag⁺ adsorption by the silica microspheres causes the decrease of fluorescence intensity of the QDs. The detection limit for Ag⁺ is found to be 10 μmol/L. The abundance of thiol groups on the surface of the microspheres could effectively remove Ag⁺ through strong interaction. When microspheres with a diameter of 1.1 μm are used as the adsorbents, the adsorption capacity for Ag⁺ reached 102 mg/g. This excellent adsorption ability is due to the abundance of thiol groups that act as the active sites, facilitating the adsorption of the massive metal ions on the surface of the microspheres. Furthermore, the adsorption isotherm data follows the Freundlich model. The structure and content of the silica microspheres were investigated by scanning and high‐resolution transmission electron microscopy, energy dispersive X‐ray spectroscopy, and Raman analysis, and the fluorescence properties were characterized by fluorescence microscopy.     

Ultrasensitive and Selective Detection of Cd(II) Using ZnSe‐Xanthan Gum Complex/CNT Modified Electrodes

This work describes for the first time the employment of water soluble GSH‐ZnSe QDs stabilized by XG and MWCNT for electrode modification in the detection of Cd ions in a highly sensitive and selective manner resulting from the unique structure and surface chemistry of the used QDs. The surface of a glassy carbon (GC) electrode was modified through casting a thin layer of multiwalled carbon nanotubes (MWCNT) followed by a complex layer of ZnSe quantum dots (QDs) stabilized by xanthan gum (XG). Due to the electrocatalytic properties of MWCNT and electroanalytical performance of ZnSe‐XG complex, the new modified electrode significantly improves the sensitivity and selectivity of Cd(II) detection and exhibits enhanced performance in comparison to bare GC, ZnSe/GC and ZnSe/MWCNT/GC electrodes. Strong interactions between ZnSe QDs and XG resulting from hydrogen bonding and complexing association led to stabilization of ZnSe QDs and higher affinity towards Cd(II) ions adsorption compared to a ZnSe QDs film alone. The modified electrode showed linear response in a wide concentration range from 100 nM to 5 μM (R²=0.9967) along with a high sensitivity of 156.6 nA ⋅ mol⁻¹ ⋅ L⁻¹ and a low detection limit of 20 nM. The electrode shows high selectivity to Cd with negligible interference from other metal ions and salts.     

Brightening,Blinking, Bluing and Bleaching in the Life of a Quantum Dot: Friend or Foe?

Semiconductor nanocrystals or quantum dots (QDs) are highly photoluminescent materials with unique optical attributes that are being exploited in an ever‐increasing array of applications. However, the complex surface chemistry of these finite‐sized fluorophores gives rise to a number of photophysical phenomena that can complicate their use in imaging applications. Fluorescence intermittency (FI), photoluminescence enhancement (PLE) and spectral bluing are properties of QD emission that would appear, at first sight, detrimental to quantitative measurement. Fortunately, developments in rational QD synthesis and surface modification are promising to minimize the effects of these fluorescence instabilities, while applications that exploit them are now coming to the fore. We review recent experimental and theoretical studies of FI, PLE and bluing, highlighting the benefits, as well as complications, they bring to key applications.     

Hybrid fluorescent nanoparticles from quantum dots coupled to cellulose nanocrystals

Carboxylated cellulose nanocrystals (CNCs) were decorated with CdSe/ZnS quantum dots (QDs) using a carbodiimide chemistry coupling approach. The one-step covalent modification was supported by nanoscale imaging, which showed QDs clustered on and around the CNCs after coupling. The QD–CNC hybrid nanoparticles remained colloidally stable in aqueous suspension and were fluorescent, exhibiting the broad excitation and narrow emission profile characteristic of the QDs. QD–CNCs in nanocomposite films imparted strong fluorescence within CNC-compatible matrices at relatively low loadings (0.15 nmol QDs/g of dry film), without altering the overall physical properties or self-assembly of the CNCs. The hybrid QD–CNCs may find applications in nanoparticle tracking, bio-imaging, optical/sensing devices, and anti-counterfeit technologies.     

Basic Principles and Current Trends in Colloidal Synthesis of Highly Luminescent Semiconductor Nanocrystals

The principal methods for the synthesis of highly luminescent core–shell colloidal quantum dots (QDs) of the most widely used CdSe, CdS, ZnSe, and other A^IIB^VI nanocrystals are reviewed. One‐pot versus multistage core synthesis approaches are discussed. The noninjection one‐pot method ensures slow, controllable growth of core nanocrystals starting from magic‐size seed recrystallization, which yields defect‐free cores with strictly specified sizes and shapes and a high monodispersity. Subsequent injection of shell precursors allows the formation of gradient core–shell QDs with a smooth potential barrier for electrons and holes, without strains or interfacial defects, and, as a consequence, a luminescence quantum yield (QY) approaching 100 %. These general approaches can also be applied to semiconductor core–shell QDs other than A^IIB^VI ones to cover the broad spectral range from the near‐UV to IR regions of the optical spectrum, thus displacing fluorescent organic dyes from their application areas.     

Auger Ionization Beats Photo‐Oxidation of Semiconductor Quantum Dots: Extended Stability of Single‐Molecule Photoluminescence

Despite the bright and tuneable photoluminescence (PL) of semiconductor quantum dots (QDs), the PL instability induced by Auger recombination and oxidation poses a major challenge in single‐molecule applications of QDs. The incomplete information about Auger recombination and oxidation is an obstacle in the resolution of this challenge. Here, we report for the first time that Auger‐ionized QDs beat self‐sensitized oxidation and the non‐digitized PL intensity loss. Although high‐intensity photoactivation insistently induces PL blinking, the transient escape of QDs into the ultrafast Auger recombination cycle prevents generation of singlet oxygen (¹O₂) and preserves the PL intensity. By the detection of the NIR phosphorescence of ¹O₂ and evaluation of the photostability of single QDs in aerobic, anaerobic, and ¹O₂ scavenger‐enriched environments, we disclose relations of Auger ionization and ¹O₂‐mediated oxidation to the PL stability of single QDs, which will be useful during the formulation of QD‐based single‐molecule imaging tools and single‐photon devices.     

Tuning Optical Properties and Photocatalytic Activities of Carbon‐based “Quantum Dots” Through their Surface Groups

We report recent progress in tuning optical properties and photocatalytic activities of carbon‐based quantum dots (carbon‐based QDs) through their surface groups. It is increasingly clear that the properties of carbon‐based QDs are more dependent on their surface groups than on their size. The present challenge remains as to how to control the type, number, and conformation of the heterogeneous groups on the surface of carbon‐based QDs when considering their target applications. By reviewing the related achievements, this personal account aims to help us understand the roles different surface groups play in tuning the properties of carbon‐based QDs. A number of significant accomplishments have demonstrated that surface groups possess strong power in engineering electronic structure and controlling photogenerated charge behaviors of carbon‐based QDs. However, effective strategies for modifying carbon‐based QDs with diverse heterogeneous groups are still needed.     

Synthesis of imidazolium‐functionalized ionic polyurethane and formation of CdTe quantum dot–polyurethane nanocomposites

A series of positively charged imidazolium‐functionalized ionic polyurethanes (IPUs) were prepared in one‐step polymerization process by polymerization of presynthesized short‐chain imidazolium‐based ionic diol, polyethylene glycols with different molecular weights as long‐chain diols, and toluylene‐2,4‐diisocyanate. The structures of IPUs are confirmed by ¹H NMR analysis, and the thermogravimetric analysis measurement indicates that the IPUs have high degradation temperature. Fluorescent nanocrystal–polymer composites CdTe–IPU can be prepared conveniently, by the electrostatic interaction between positively charged IPUs and the negatively charged aqueous CdTe quantum dots (QDs). UV–vis absorption and photoluminescence spectra indicate the photochemical stability and strong fluorescent emission of CdTe–IPU composites. The quantum yields (QYs) of the composites are high and basically restore the QYs of the pure QDs. In addition, the transmission electron microscopy photographs show that the QDs in composites are uniform (about 3 nm in diameter) and monodisperse. The obtained nanocomposites are powder or elastomers with good film building. The casted CdTe–IPU films are transparent under visible light, and the colors of the composites and their films are vivid under a UV lamp. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Quantifying the Thermodynamics of Ligand Binding to CsPbBr3 Quantum Dots

Cesium lead halide perovskites are an emerging class of quantum dots (QDs) that have shown promise in a variety of applications; however, their properties are highly dependent on their surface chemistry. To this point, the thermodynamics of ligand binding remain unstudied. Herein, ¹H NMR methods were used to quantify the thermodynamics of ligand exchange on CsPbBr₃ QDs. Both oleic acid and oleylamine native ligands dynamically interact with the CsPbBr₃ QD surface, having individual surface densities of 1.2–1.7 nm^?2. 10‐Undecenoic acid undergoes an exergonic exchange equilibrium with bound oleate (K_eq=1.97) at 25 °C while 10‐undecenylphosphonic acid undergoes irreversible ligand exchange. Undec‐10‐en‐1‐amine exergonically exchanges with oleylamine (K_eq=2.52) at 25 °C. Exchange occurs with carboxylic acids, phosphonic acids, and amines on CsPbBr₃ QDs without etching of the nanocrystal surface; increases in the steady‐state PL intensities correlate with more strongly bound conjugate base ligands.     

荧光量子点及其在生物检测中的应用

量子点(QDs)是一种零维的半导体纳米晶体,与传统的有机染料相比,具有独特的光学特征。由于它们具有激发光谱宽、发射光谱窄、发射波长精确可调、量子产率高和荧光稳定性好等特点,作为新一代的生物荧光探针,已被广泛应用于生物检测。本文介绍了QDs的基本概念和性质,探讨了QDs的制备方法及表面修饰,对其毒性也作了简要分析,提供了QDs在荧光免疫分析、生物芯片、生物传感器及体内成像等方面的应用实例。随着技术发展的不断进展,QDs在生物分析领域有着更为广泛的潜在的应用前景。     

Intercrossed Carbon Nanorings with Pure Surface States as Low‐Cost and Environment‐Friendly Phosphors for White‐Light‐Emitting Diodes

As an important energy‐saving technique, white‐light‐emitting diodes (W‐LEDs) have been seeking for low‐cost and environment‐friendly substitutes for rare‐earth‐based expensive phosphors or Pd²⁺/Cd²⁺‐based toxic quantum dots (QDs). In this work, precursors and chemical processes were elaborately designed to synthesize intercrossed carbon nanorings (IC‐CNRs) with relatively pure hydroxy surface states for the first time, which enable them to overcome the aggregation‐induced quenching (AIQ) effect, and to emit stable yellow‐orange luminescence in both colloidal and solid states. As a direct benefit of such scarce solid luminescence from carbon nanomaterials, W‐LEDs with color coordinate at (0.28, 0.27), which is close to pure white light (0.33, 0.33), were achieved through using these low‐temperature‐synthesized and toxic ion‐free IC‐CNRs as solid phosphors on blue LED chips. This work demonstrates that the design of surface states plays a crucial role in exploring new functions of fluorescent carbon nanomaterials.     

High‐Yield and Damage‐free Exfoliation of Layered Graphdiyne in Aqueous Phase

The two‐dimensional carbon material graphdiyne (GDY) holds great promise as a semiconductor and porous material, however, exfoliation of bulk GDY into single‐ or few‐layered GDY in the aqueous phase remains a challenge. We report an efficient method for the damage‐free exfoliation of bulk GDY into single‐ or few‐layered GDY with high yield in an aqueous solution of inorganic salts (e.g., Li₂SiF₆). This was confirmed by spherical‐aberration‐corrected scanning transmission electron microscopy, scanning/transmission electron microscopy, atomic force microscopy, Fourier transform infrared/Raman spectroscopy, X‐ray photoelectron spectroscopy. The method gives high exfoliation efficiency (75 wt %) without creating additional structural defects or oxides in the exfoliated GDY. Theoretical calculations suggest that non‐covalent adsorption of the anion, diffusion of the cation, and subsequent repulsive forces between adjacent flakes are the main driving force for the efficient exfoliation.     

A Brief Overview of Some Physical Studies on the Relaxation Dynamics and Förster Resonance Energy Transfer of Semiconductor Quantum Dots

This article highlights some physical studies on the relaxation dynamics and Förster resonance energy transfer (FRET) of semiconductor quantum dots (QDs) and the way these phenomena change with size, shape, and composition of the QDs. The understanding of the excited‐state dynamics of photoexcited QDs is essential for technological applications such as efficient solar energy conversion, light‐emitting diodes, and photovoltaic cells. Here, our emphasis is directed at describing the influence of size, shape, and composition of the QDs on their different relaxation processes, that is, radiative relaxation rate, nonradiative relaxation rate, and number of trap states. A stochastic model of carrier relaxation dynamics in semiconductor QDs was proposed to correlate with the experimental results. Many recent studies reveal that the energy transfer between the QDs and a dye is a FRET process, as established from 1/d⁶ distance dependence. QD‐based energy‐transfer processes have been used in applications such as luminescence tagging, imaging, sensors, and light harvesting. Thus, the understanding of the interaction between the excited state of the QD and the dye molecule and quantitative estimation of the number of dye molecules attached to the surface of the QD by using a kinetic model is important. Here, we highlight the influence of size, shape, and composition of QDs on the kinetics of energy transfer. Interesting findings reveal that QD‐based energy‐transfer processes offer exciting opportunities for future applications. Finally, a tentative outlook on future developments in this research field is given.     

A Ligand System for the Flexible Functionalization of Quantum Dots via Click Chemistry

We present a novel ligand, 5‐norbornene‐2‐nonanoic acid, which can be directly added during established quantum dot (QD) syntheses in organic solvents to generate “clickable” QDs at a few hundred nmol scale. This ligand has a carboxyl group at one terminus to bind to the surface of QDs and a norbornene group at the opposite end that enables straightforward phase transfer of QDs into aqueous solutions via efficient norbornene/tetrazine click chemistry. Our ligand system removes the traditional ligand‐exchange step and can produce water‐soluble QDs with a high quantum yield and a small hydrodynamic diameter of approximately 12 nm at an order of magnitude higher scale than previous methods. We demonstrate the effectiveness of our approach by incubating azido‐functionalized CdSe/CdS QDs with 4T1 cancer cells that are metabolically labeled with a dibenzocyclooctyne‐bearing unnatural sugar. The QDs exhibit high targeting efficiency and minimal nonspecific binding.