Nanostructured Ni2P as a Robust Catalyst for the Hydrolytic Dehydrogenation of Ammonia–Borane

Ammonia–borane (AB) is a promising chemical hydrogen‐storage material. However, the development of real‐time, efficient, controllable, and safe methods for hydrogen release under mild conditions is a challenge in the large‐scale use of hydrogen as a long‐term solution for future energy security. A new class of low‐cost catalytic system is presented that uses nanostructured Ni₂P as catalyst, which exhibits excellent catalytic activity and high sustainability toward hydrolysis of ammonia–borane with the initial turnover frequency of 40.4 mol_(H2) mol_(Ni2P)^?1 min^?1 under air atmosphere and at ambient temperature. This value is higher than those reported for noble‐metal‐free catalysts, and the obtained Arrhenius activation energy (E_a=44.6 kJ mol^?1) for the hydrolysis reaction is comparable to Ru‐based bimetallic catalysts. A clearly mechanistic analysis of the hydrolytic reaction of AB based on experimental results and a density functional theory calculation is presented.     

CuxCo1−xO Nanoparticles on Graphene Oxide as A Synergistic Catalyst for High‐Efficiency Hydrolysis of Ammonia–Borane

Ammonia–borane (AB) is an excellent material for chemical storage of hydrogen. However, the practical utilization of AB for production of hydrogen is hindered by the need of expensive noble metal‐based catalysts. Here, we report Cu_xCo_1?xO nanoparticles (NPs) facilely deposited on graphene oxide (GO) as a low‐cost and high‐performance catalyst for the hydrolysis of AB. This hybrid catalyst exhibits an initial total turnover frequency (TOF) value of 70.0 (H₂) mol/(Cat‐metal) mol?min, which is the highest TOF ever reported for noble metal‐free catalysts, and a good stability keeping 94 % activity after 5 cycles. Synchrotron radiation‐based X‐ray absorption spectroscopy (XAS) investigations suggested that the high catalytic performance could be attributed to the interfacial interaction between Cu_xCo_1?xO NPs and GO. Moreover, the catalytic hydrolysis mechanism was studied by in situ XAS experiments for the first time, which reveal a significant water adsorption on the catalyst and clearly confirm the interaction between AB and the catalyst during hydrolysis.     

Synthesis of Ni–Ru Alloy Nanoparticles and Their High Catalytic Activity in Dehydrogenation of Ammonia Borane

We report the synthesis and characterization of new Ni_xRu_1?x (x=0.56–0.74) alloy nanoparticles (NPs) and their catalytic activity for hydrogen release in the ammonia borane hydrolysis process. The alloy NPs were obtained by wet‐chemistry method using a rapid lithium triethylborohydride reduction of Ni²⁺ and Ru³⁺ precursors in oleylamine. The nature of each alloy sample was fully characterized by TEM, XRD, energy dispersive X‐ray spectroscopy (EDX), and X‐ray photoelectron spectroscopy (XPS). We found that the as‐prepared Ni–Ru alloy NPs exhibited exceptional catalytic activity for the ammonia borane hydrolysis reaction for hydrogen release. All Ni–Ru alloy NPs, and in particular the Ni_0.74Ru_0.26 sample, outperform the activity of similar size monometallic Ni and Ru NPs, and even of Ni@Ru core‐shell NPs. The hydrolysis activation energy for the Ni_0.74Ru_0.26 alloy catalyst was measured to be approximately 37 kJ mol^?1. This value is considerably lower than the values measured for monometallic Ni (≈70 kJ mol^?1) and Ru NPs (≈49 kJ mol^?1), and for Ni@Ru (≈44 kJ mol^?1), and is also lower than the values of most noble‐metal‐containing bimetallic NPs reported in the literature. Thus, a remarkable improvement of catalytic activity of Ru in the dehydrogenation of ammonia borane was obtained by alloying Ru with a Ni, which is a relatively cheap metal.     

Zeolite‐Encaged Single‐Atom Rhodium Catalysts: Highly‐Efficient Hydrogen Generation and Shape‐Selective Tandem Hydrogenation of Nitroarenes

Single‐atom catalysts are emerging as a new frontier in heterogeneous catalysis because of their maximum atom utilization efficiency, but they usually suffer from inferior stability. Herein, we synthesized single‐atom Rh catalysts embedded in MFI ‐type zeolites under hydrothermal conditions and subsequent ligand‐protected direct H₂ reduction. C_s‐corrected scanning transmission electron microscopy and extended X‐ray absorption analyses revealed that single Rh atoms were encapsulated within 5‐membered rings and stabilized by zeolite framework oxygen atoms. The resultant catalysts exhibited excellent H₂ generation rates from ammonia borane (AB) hydrolysis, up to 699 min^?1 at 298 K, representing the top level among heterogeneous catalysts for AB hydrolysis. The catalysts also showed superior catalytic performance in shape‐selective tandem hydrogenation of various nitroarenes by coupling with AB hydrolysis, giving >99 % yield of corresponding amine products.     

Flame Spray Pyrolysis for Finding Multicomponent Nanomaterials with Superior Electrochemical Properties in the CoOx‐FeOx System for Use in Lithium‐Ion Batteries

High‐temperature flame spray pyrolysis is employed for finding highly efficient nanomaterials for use in lithium‐ion batteries. CoO_x‐FeO_x nanopowders with various compositions are prepared by one‐pot high‐temperature flame spray pyrolysis. The Co and Fe components are uniformly distributed over the CoO_x‐FeO_x composite powders, irrespective of the Co/Fe mole ratio. The Co‐rich CoO_x‐FeO_x composite powders with Co/Fe mole ratios of 3:1 and 2:1 have mixed crystal structures with CoFe₂O₄ and Co₃O₄ phases. However, Co‐substituted magnetite composite powders prepared from spray solutions with Co and Fe components in mole ratios of 1:3, 1:2, and 1:1 have a single phase. Multicomponent CoO_x‐FeO_x powders with a Co/Fe mole ratio of 2:1 and a mixed crystal structure with Co₃O₄ and CoFe₂O₄ phases show high initial capacities and good cycling performance. The stable reversible discharge capacities of the composite powders with a Co/Fe mole ratio of 2:1 decrease from 1165 to 820 mA h g^?1 as the current density is increased from 500 to 5000 mA g^?1; however, the discharge capacity again increases to 1310 mA h g^?1 as the current density is restored to 500 mA g^?1.     

In Situ Facile Synthesis of Ru‐Based Core–Shell Nanoparticles Supported on Carbon Black and Their High Catalytic Activity in the Dehydrogenation of Amine‐Boranes

Well‐dispersed core–shell Ru@M (M=Co, Ni, Fe) nanoparticles (NPs) supported on carbon black have been synthesized via a facile in situ one‐step procedure under ambient condition. Core‐shell Ru@Co NPs were synthesized and characterized for the first time. The as‐synthesized Ru@Co and Ru@Ni NPs exhibit superior catalytic activity in the hydrolysis of ammonia borane compared with their monometallic and alloy counterparts. The Ru@Co/C NPs are the most reactive, with a turnover frequency (TOF) value of 320 (mol min^?1) mol_Ru^?1 and activation energy (E_a) of 21.16 kJ mol^?1. Ru@Ni/C NPs are the next most active, whereas Ru@Fe/C NPs are almost inactive. Additionally, the as‐synthesized NPs supported on carbon black exhibit higher catalytic activity than catalysts on other conventional supports, such as SiO₂ and γ‐Al₂O₃.     

Enhanced Photocatalytic Hydrogen‐Production Performance of Graphene–ZnxCd1−xS Composites by Using an Organic S Source

In response to the increasing concerns over energy and environmental sustainability, photocatalytic water‐splitting technology has attracted broad attention for its application in directly converting solar energy to valuable hydrogen (H₂) energy. In this study, high‐efficiency visible‐light‐driven photocatalytic H₂ production without the assistance of precious‐metal cocatalysts was achieved on graphene–Zn_xCd_1?xS composites with controlled compositions. The graphene‐Zn_xCd_1?xS composites were for the first time fabricated by a one‐step hydrothermal method with thiourea as an organic S source. It was found that thiourea facilitates heterogeneous nucleation of Zn_xCd_1?xS and in situ growth of Zn_xCd_1?xS nanoparticles on graphene nanosheets. Such a scenario results in abundant and intimate interfacial contact between graphene and Zn_xCd_1?xS nanoparticles, efficient transfer of the photogenerated charge carriers, and enhanced photocatalytic activity for H₂ production. The highest H₂‐production rate of 1.06 mmol h^?1 g^?1 was achieved on a graphene–Zn_0.5Cd_0.5S composite photocatalyst with a graphene content of 0.5 wt %, and the apparent quantum efficiency was 19.8 % at 420 nm. In comparison, the graphene–Zn_xCd_1?xS composite photocatalyst prepared by using an inorganic S source such as Na₂S exhibited much lower activity for photocatalytic H₂ production. In this case, homogeneous nucleation of Zn_xCd_1?xS becomes predominant and results in insufficient and loose contact with the graphene backbone through weak van der Waals forces and a large particle size. This study highlights the significance of the choice of S source in the design and fabrication of advanced graphene‐based sulfide photocatalytic materials with enhanced activity for photocatalytic H₂ production.     

原位合成钴/还原氧化石墨烯纳米粒子催化氨硼烷制氢

采用简单的原位还原合成方法,利用具有温和还原性能的氨硼烷作为还原剂,在室温下一步还原氧化石墨烯和氯化钴混合溶液制备了还原氧化石墨烯负载钴纳米复合材料催化剂. 利用所制备的钴/还原氧化石墨烯催化剂催化氨硼烷水解制氢,发现钴/还原氧化石墨烯具有优异的催化性能. 相对于没有负载的钴纳米粒子以及采用硼氢化钠作为还原剂制备的钴/还原氧化石墨烯催化剂,采用氨硼烷还原制备的钴/还原氧化石墨烯催化剂表现出更加优越的催化性能. 动力学测试表明,钴/还原氧化石墨烯催化氨硼烷水解反应为零级反应,同时钴/还原氧化石墨烯催化剂催化氨硼烷水解反应的活化能为27.10 kJ·mol^-1,低于大部分已报道的其它催化剂,甚至一些贵金属催化剂的活化能. 钴/还原氧化石墨烯催化剂有着稳定的循环使用性,特别是其具有的磁性使得它能够直接从溶液中通过磁力回收,极具应用前景. 这种简单有效的合成方法有望推广到其它的金属-还原氧化石墨烯纳米复合材料体系.     

A Keggin Polyoxometalate Shows Water Oxidation Activity at Neutral pH: POM@ZIF‐8, an Efficient and Robust Electrocatalyst

Keggin‐type polyoxometalate anions [XM₁₂O₄₀]^n? are versatile, as their applications in interdisciplinary areas show. The Keggin anion [CoW₁₂O₄₀]^6? turns into an efficient and robust electrocatalyst upon its confinement in the well‐defined void space of ZIF‐8, a metal–organic framework (MOF). [H₆CoW₁₂O₄₀]@ZIF‐8 is so stable to water oxidation that it retains its initial activity even after 1000 catalytic cycles. The catalyst has a turnover frequency (TOF) of 10.8 mol O₂(mol Co)^?1 s^?1, one of the highest TOFs for electrocatalytic oxygen evolution at neutral pH. Controlled experiments rule out the chances of formation and participation of CoO_x in this electrocatalyic water oxidation.     

Oxyhydroxide Nanosheets with Highly Efficient Electron–Hole Pair Separation for Hydrogen Evolution

The facile electron–hole pair recombination in earth‐abundant transition‐metal oxides is a major limitation for the development of highly efficient hydrogen evolution photocatalysts. In this work, the thickness of a layered β‐CoOOH semiconductor that contains metal/hydroxy groups was reduced to obtain an atomically thin, two‐dimensional nanostructure. Analysis by ultrafast transient absorption spectroscopy revealed that electron–hole recombination is almost suppressed in the as‐prepared 1.3 nm thick β‐CoOOH nanosheet, which leads to prominent electron–hole separation efficiencies of 60–90 % upon irradiation at 350–450 nm, which are ten times higher than those of the bulk counterpart. X‐ray absorption spectroscopy and first‐principles calculations demonstrate that [HO?CoO_6?x] species on the nanosheet surface promote H⁺ adsorption and H₂ desorption. An aqueous suspension of the β‐CoOOH nanosheets exhibited a high hydrogen production rate of 160 μmol g^?1 h^?1 even when the system was operated for hundreds of hours.     

Superionic Conduction in Co‐Vacant P2‐NaxCoO2 Created by Hydrogen Reductive Elimination

The layered P2‐Na_xMO₂ (M: transition metal) system has been widely recognized as electronic or mixed conductor. Here, we demonstrate that Co vacancies in P2‐Na_xCoO₂ created by hydrogen reductive elimination lead to an ionic conductivity of 0.045 S cm^?1 at 25 °C. Using in situ synchrotron X‐ray powder diffraction and Raman spectroscopy, the composition of the superionic conduction phase is evaluated to be Na_0.61(H₃O)_0.18Co_0.93O₂. Electromotive force measurements as well as molecular dynamics simulations indicate that the ion conducting species is proton rather than hydroxide ion. The fact that the Co‐stoichiometric compound Na_x(H₃O)_yCoO₂ does not exhibit any significant ionic conductivity proves that Co vacancies are essential for the occurrence of superionic conductivity.     

Synthesis of Highly Active and Stable Spinel‐Type Oxygen Evolution Electrocatalysts by a Rapid Inorganic Self‐Templating Method

Composition‐adjustable spinel‐type metal oxides, Mn_xCo_3?xO_4?δ (x=0.8–1.4), were synthesized in ethanol solutions by a rapid inorganic self‐templating mechanism using KCl nanocrystals as the structure‐directing agent. The Mn_xCo_3?xO_4?δ materials showed ultrahigh oxygen evolution activity and strong durability in alkaline solutions, and are capable of delivering a current density of 10 mA cm^?2 at 1.58 V versus the reversible hydrogen electrode in 0.1 M KOH solution, which is superior in comparison to IrO₂ catalysts under identical experimental conditions, and comparable to the most active noble‐metal and transition‐metal oxygen evolution electrocatalysts reported so far. The high performance for catalytic oxygen evolution originates from both compositional and structural features of the synthesized materials. The moderate content of Mn doping into the spinel framework led to their improved electronic conductivity and strong oxidizing ability, and the well‐developed porosity, accompanied with the high affinity between OH^? reactants and catalyst surface, contributed to the smooth mass transport, thus endowing them with superior oxygen evolution activity.     

Graphitic Carbon Nitride Nanoribbons: Graphene‐Assisted Formation and Synergic Function for Highly Efficient Hydrogen Evolution

The development of new promising metal‐free catalysts is of great significance for the electrocatalytic hydrogen evolution reaction (HER). Herein, a rationally assembled three‐dimensional (3D) architecture of 1D graphitic carbon nitride (g‐C₃N₄) nanoribbons with 2D graphene sheets has been developed by a one‐step hydrothermal method. Because of the multipathway of charge and mass transport, the hierarchically structured g‐C₃N₄ nanoribbon–graphene hybrids lead to a high electrocatalytic ability for HER with a Tafel slope of 54 mV decade^?1, a low onset overpotential of 80 mV and overpotential of 207 mV to approach a current of 10 mA cm^?2, superior to those non‐metal materials and well‐developed metallic catalysts reported previously. This work presents a great advance for designing and developing highly efficient metal‐free catalyst for hydrogen evolution.     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.     

Nitrogen‐doped Carbon–CoOx Nanohybrids: A Precious Metal Free Cathode that Exceeds 1.0 W cm−2 Peak Power and 100 h Life in Anion‐Exchange Membrane Fuel Cells

Efficient and durable nonprecious metal electrocatalysts for the oxygen reduction (ORR) are highly desirable for several electrochemical devices, including anion exchange membrane fuel cells (AEMFCs). Here, a 2D planar electrocatalyst with CoO_x embedded in nitrogen‐doped graphitic carbon (N‐C‐CoO_x) was created through the direct pyrolysis of a metal–organic complex with a NaCl template. The N‐C‐CoO_x catalyst showed high ORR activity, indicated by excellent half‐wave (0.84 V vs. RHE) and onset (1.01 V vs. RHE) potentials. This high intrinsic activity was also observed in operating AEMFCs where the kinetic current was 100 mA cm^?2 at 0.85 V. When paired with a radiation‐grafted ETFE powder ionomer, the N‐C‐CoO_x AEMFC cathode was able to achieve extremely high peak power density (1.05 W cm^?2) and mass transport limited current (3 A cm^?2) for a precious metal free electrode. The N‐C‐CoO_x cathode also showed good stability over 100 hours of operation with a voltage decay of only 15 % at 600 mA cm^?2 under H₂/air (CO₂‐free) reacting gas feeds. The N‐C‐CoO_x cathode catalyst was also paired with a very low loading PtRu/C anode catalyst, to create AEMFCs with a total PGM loading of only 0.10 mg_Pt‐Ru cm^?2 capable of achieving 7.4 W mg^?1_PGM as well as supporting a current of 0.7 A cm^?2 at 0.6 V with H₂/air (CO₂ free)—creating a cell that was able to meet the 2019 U.S. Department of Energy initial performance target of 0.6 V at 0.6 A cm^?2 under H₂/air with a PGM loading <0.125 mg cm^?2 with AEMFCs for the first time.     

Heterostructured Inter‐Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition‐metal‐oxides (TMOs)‐based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter‐doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm^?2 and a small Tafel slope of 23.5 mV dec^?1, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm^?2. As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm^?2 for alkaline overall water splitting.     

Extensive Structural Rearrangements upon Reduction of 9H‐9‐Borafluorene

Common wisdom has it that organoboranes are readily oxidized. Described herein is that also their reduction can result in remarkable chemistry. Treatment of dimeric 9H‐9‐borafluorene with Li metal in toluene yields two strikingly different classes of compounds. One part of the sample reacts in a way similar to B₂H₆, thus affording an aryl(hydro)borane cluster reminiscent of the [B₃H₈]^? anion. The other part furnishes a dianionic boron‐doped graphene flake devoid of hydrogen substituents at the boron centers and featuring a central B?B bond. A change in the solvent to THF allows an isolation of this dibenzo[g,p]chrysene analogue in good yields.     

Surfactant‐Free Synthesis of Plasmonic Tungsten Oxide Nanowires with Visible‐Light‐Enhanced Hydrogen Generation from Ammonia Borane

WO_3?x nanowires were successfully synthesized through a simple surfactant‐free solvothermal method. These nanowires exhibit strong plasmonic absorption in the visible and near‐infrared region owing to the abundant oxygen vacancies. The plasmon excitation of these WO_3?x nanowires provide five times enhancement on the hydrogen generation from ammonia borane.     

Hydrogen Doping into MoO3 Supports toward Modulated Metal–Support Interactions and Efficient Furfural Hydrogenation on Iridium Nanocatalysts

As promising supports, reducible metal oxides afford strong metal–support interactions to achieve efficient catalysis, which relies on their band states and surface stoichiometry. In this study, in situ and controlled hydrogen doping (H doping) by means of H₂ spillover was employed to engineer the metal–support interactions in hydrogenated MoO_x‐supported Ir (Ir/H?MoO_x) catalysts and thus promote furfural hydrogenation to furfuryl alcohol. By easily varying the reduction temperature, the resulting H doping in a controlled manner tailors low‐valence Mo species (Mo⁵⁺ and Mo⁴⁺) on H?MoO_x supports, thereby promoting charge redistribution on Ir and H?MoO_x interfaces. This further leads to clear differences in H₂ chemisorption on Ir, which illustrates its potential for catalytic hydrogenation. As expected, the optimal Ir/H?MoO_x with controlled H doping afforded high activity (turnover frequency: 4.62 min^?1) and selectivity (>99 %) in furfural hydrogenation under mild conditions (T=30 °C, P =2 MPa), which means it performs among the best of current catalysts.     

Delivery of Highly Active Noble‐Metal Nanoparticles into Microspherical Supports by an Aerosol‐Spray Method

Noble metal nanoparticles (NPs) with 1–5 nm diameter obtained from NaHB₄ reduction possess high catalytic activity. However, they are rarely used directly. This work presents a facile, versatile, and efficient aerosol‐spray approach to deliver noble‐metal NPs into metal oxide supports, while maintaining the size of the NPs and the ability to easily adjust the loading amount. In comparison with the conventional spray approach, the size of the loaded noble‐metal nanoparticles can be significantly decreased. An investigation of the 4‐nitrophenol hydrogenation reaction catalyzed by these materials suggests that the NPs/oxides catalysts have high activity and good endurance. For 1 % Au/CeO₂ and Pd/Al₂O₃ catalysts, the rate constants reach 2.03 and 1.46 min^?1, which is much higher than many other reports with the same noble‐metal loading scale. Besides, the thermal stability of catalysts can be significantly enhanced by modifying the supports. Therefore, this work contributes an efficient method as well as some guidance on how to produce highly active and stable supported noble‐metal catalysts.