Reversibly Thermosecreting Organogels with Switchable Lubrication and Anti-Icing Performance

Synthetic gels with switchable interfacial properties have great potential in smart devices and controllable transport. Herein, we design an organogel by incorporating a binary liquid mixture with an upper critical solution temperature (UCST) into a polymer network, resulting in reversible modulation of lubrication and adhesion properties. As the temperature changes, the lubricating mechanism changes reversibly from boundary lubrication to hydrodynamic lubrication due to phase separation within the binary solution permeating the gel (friction coefficient 0.4–0.03). Droplets appear on the gel surface at low temperature and disappear with temperature higher than the critical phase separation temperature (T_ps) of the organogel. The organogel possesses a relatively low ice adhesive strength (less than 1 kPa). This material has potential applications in anti-icing and smart devices, and we believe that this design strategy can be expanded to other systems such as aqueous solutions and hydrogels.     

Solvent‐Driven Chiral‐Interaction Reversion for Organogel Formation

For chiral gels and related applications, one of the critical issues is how to modulate the stereoselective interaction between the gel and the chiral guest precisely, as well as how to translate this information into the macroscopic properties of materials. Herein, we report that this process can also be modulated by nonchiral solvents, which can induce a chiral‐interaction reversion for organogel formation. This process could be observed through the clear difference in gelation speed and the morphology of the resulting self‐assembly. This chiral effect was successfully applied in the selective separation of quinine enantiomers and imparts “smart” merits to the gel materials.     

Switchable friction of stimulus-responsive hydrogels

Poly(N-isopropylacrylamide) (pNIPAAm) gels are stimulus-responsive hydrogels that exhibit large reversible changes in their volume and surface physicochemical properties near the lower critical solution temperature (LCST) in response to external stimuli, such as a change in temperature or solvent composition. Here we report how different phase states, induced isothermally by changes in the solvent composition, affect the tribological properties of pNIPAAm hydrogels. Our measurements indicate that gels in a collapsed conformation (above the LCST) exhibit significantly more friction than swollen gels (below the LCST) at low shear rates. These differences arise from changes in the surface roughness, adhesive interactions, and chain entanglements of the gel surfaces associated with the phase transition. Importantly, we show that the changes in friction, triggered by an external stimulus, are reversible. These reversible and possibly tunable changes in friction may have a significant impact on the design of coatings for biosensors and for actuation devices based on stimulus-responsive hydrogels.     

Phase Transitions and Critical Behaviour of Binary Liquid Mixtures

Summary.  Compared to the simple one-component case, the phase behaviour of binary liquid mixtures shows an incredibly rich variety of phenomena. In this contribution we restrict ourselves to so-called binary symmetric mixtures, i.e. where like-particle interactions are equal (Φ₁₁(r) = Φ₂₂(r)), whereas the interactions between unlike fluid particles differ from those of likes ones (Φ₁₁(r) ≠ Φ₁₂(r)). Using both the simple mean spherical approximation and the more sophisticated self-consistent Ornstein-Zernike approximation, we have calculated the structural and thermodynamic properties of such a system and determine phase diagrams, paying particular attention to the critical behaviour (critical and tricritical points, critical end points). We then study the thermodynamic properties of the same binary mixture when it is in thermal equilibrium with a disordered porous matrix which we have realized by a frozen configuration of equally sized particles. We observe – in qualitative agreement with experiment – that already a minute matrix density is able to lead to drastic changes in the phase behaviour of the fluid. We systematically investigate the influence of the external system parameters (due to the matrix properties and the fluid–matrix interactions) and of the internal system parameters (due to the fluid properties) on the phase diagram. Received June 27, 2001. Accepted July 2, 2001     

Phase Transitions and Critical Behaviour of Binary Liquid Mixtures

 Compared to the simple one-component case, the phase behaviour of binary liquid mixtures shows an incredibly rich variety of phenomena. In this contribution we restrict ourselves to so-called binary symmetric mixtures, i.e. where like-particle interactions are equal (Φ₁₁(r) = Φ₂₂(r)), whereas the interactions between unlike fluid particles differ from those of likes ones (Φ₁₁(r) ≠ Φ₁₂(r)). Using both the simple mean spherical approximation and the more sophisticated self-consistent Ornstein-Zernike approximation, we have calculated the structural and thermodynamic properties of such a system and determine phase diagrams, paying particular attention to the critical behaviour (critical and tricritical points, critical end points). We then study the thermodynamic properties of the same binary mixture when it is in thermal equilibrium with a disordered porous matrix which we have realized by a frozen configuration of equally sized particles. We observe – in qualitative agreement with experiment – that already a minute matrix density is able to lead to drastic changes in the phase behaviour of the fluid. We systematically investigate the influence of the external system parameters (due to the matrix properties and the fluid–matrix interactions) and of the internal system parameters (due to the fluid properties) on the phase diagram.     

Water effect on the gelation behavior of polyacrylonitrile/dimethyl sulfoxide solution

The gelation behavior of polyacrylonitrile (PAN)/dimethyl sulfoxide (DMSO) solution containing different amounts of water has been investigated using various methods. The ternary phase diagram of PAN/DMSO/water system indicated that water enhanced the temperature at which phase separation of PAN/DMSO solution occurred. Intrinsic viscosities [η] of dilute PAN/DMSO solution and PAN/DMSO/water solution at varied temperatures were measured to examine the influence of water on the phase behavior of PAN/DMSO solution. The presence of water in the solution gave rise to elevated critical temperature T_c. The gelation temperature T_g obtained by measuring the loss tangent tan δ at different oscillation frequencies in a cooling process was found to increase with increased water content in the solution. The critical relaxation exponent n value, however, changed little with varied concentration. During the aging process, the gelation rate of PAN/DMSO solution increases with the water level. The n values of the PAN/DMSO solutions with 2 wt% and 4 wt% water were a little larger than that of the solution without water, which may be explained by the turbid gel resulted from phase separation. The n values obtained in the aging process were larger than those obtained in the cooling process for the same three solutions, ascribed to the weaker gel with less cross-linking points formed in long time. Water led to the formation of denser gel structure. The coarser gel surface can also be attributed to the phase separation promoted by water.     

多重环境刺激响应性聚苄醚型树状分子凝胶制备及性能研究

环境刺激响应性超分子凝胶材料在传感器、光开关、人工触角、药物缓释等领域表现出潜在的应用前景。本文设计合成了一种新型的核心含偶氮苯官能团聚苄醚型树枝状分子凝胶因子CA-G2。成胶性能测试表明,该凝胶因子在23种有机溶剂和混合溶剂中均可以形成稳定的淡黄色凝胶,其中在苯中表现出最优的成凝胶性能,临界成胶浓度(CGC)可达2.0mg/mL(0.23(wt)%),相当于一个树枝状分子可以固定1.5×10⁴个溶剂分子,表明该凝胶因子具有非常优异的成凝胶性能。并且,该类凝胶材料能够同时对热、超声和触变等外界环境刺激产生响应,并伴随着宏观上凝胶-溶胶的相互转变。此外,该类凝胶对罗丹明B染料分子具有优异的吸附性能,吸附效率高达96.7%。     

Local concentration of gel phase domains in supported lipid bilayers under light irradiation in binary mixture of phospholipids doped with dyes for photoinduced activation

Recently, lipid bilayers supported on solid substrates are considered to offer potential as biological devices utilizing biological membranes and membrane proteins. In particular, artificially patterned supported bilayers hold great promise for the development of biological devices. In this study, we show control of the formation and location of phase-separated domain structures by light irradiation for gel phase and liquid-crystalline phase separation structures in a DMPC-DOPC binary lipid bilayer tagged with dye molecules on SiO2/Si substrates. Upon light irradiation, the gel phase domain structures disappeared from the phase-separated bilayers. This disappearance indicates that the light irradiation causes a local increase in the temperature of the lipid bilayer. In this disappearance phenomenon, the photoinduced activation of dye lipids, e.g. fluorescent lipids, is considered to play an important role, since the same phenomenon does not occur in lipid bilayers that have a low concentration of dye lipids. Thus, the local increase in temperature is propagated by light absorption of the dye lipid and subsequent photoinduced activation of nonradiative molecular vibrations. Subsequent interruption of the photoinduced activation for molecular motion allowed the gel phase domain structures to precipitate and grow again. Moreover, the domain area fraction remaining after the photoinduced activation was higher than that before the photoinduced activation. This result indicates that the local increase in temperature propagated by dye-excitation enhances formation of the gel phase domains. By utilizing this phenomenon, we could preferentially induce formation of domain structures within the light-irradiated regions. This technique could be the basis for a new patterning technique based on domain structures. Moreover, these domain structure patterns can be eliminated by increasing the temperature, allowing rewritable patterning.     

Thermoreversible gelation and phase separation in aqueous methyl cellulose solutions

We derived typical phase diagrams for aqueous solutions of methyl cellulose (MC) of different molecular weights via micro‐differential scanning calorimetry, small‐angle X‐ray scattering, and visual inspection. The phase diagrams showed the cooccurrence of gelation and phase separation and qualitatively agreed with the theoretically calculated diagrams. The sol–gel transition line and phase separation line of a lower critical solution point type shifted toward lower temperatures and lower concentrations with an increase in the MC molecular weight. The sol–gel transition line intersected at a temperature higher than the critical point of the phase separation; therefore, both sol–gel phase separation and gel–gel phase separation were possible, depending on the temperature. Specifically, through visual inspection of a high molecular weight MC sample in the critical temperature region, we observed phase separation into two coexisting gels with different polymer concentrations. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 91–100, 2001     

A DSC study of miscibility and phase separation in crystalline polymer blends of phenolphthalein poly(ether ether sulfone) and poly(ethylene oxide)

The miscibility of blends of phenolphthalein poly(ether ether sulfone) (PES-C) and poly(ethylene oxide) (PEO) was established on the basis of the thermal analysis results. Differential scanning calorimetry (DSC) studies showed that the PES-C/PEO blends prepared by casting from N,N-dimethylformamide (DMF) possessed a single, composition-dependent glass transition temperature (T_g), and thus that PES-C and PEO are miscible in the amorphous state at all compositions at lower temperature. At higher temperature, the blends underwent phase separation, and the PES-C/PEO blend system was found to display a lower critical solution temperature (LCST) behavior. The phase separation process in the blends has also been investigated by using DSC. Annealed at high temperatures, the PES-C/PEO blends exhibited significant changes of thermal properties, such as the enthalpy of crystallization and fusion, temperatures of crystallization and melting, depending on blend composition when phase separation occurred. These changes reflect different characteristics of phase structure in the blends, and were taken as probes to determine phase boundary. From both the thermal analysis and optical microscopy, the phase diagram of the blend system was established. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1383–1392, 1997     

Preparation and characterization of single-hole macroporous organogel particles of high toughness and superfast responsivity

Crosslinked macroporous polymer particles containing a single large hole in their surfaces were prepared by solution crosslinking of butyl rubber (PIB) in benzene using sulfur monochloride (S₂Cl₂) as a crosslinking agent. The reactions were carried out within the droplets of frozen solutions of PIB and S₂Cl₂ at −18 °C. Spherical millimeter-sized organogel beads with a polydispersity of less than 10% were obtained. The particles display a two phase morphology indicating that both cryogelation and reaction-induced phase separation mechanisms are operative during the formation of the porous structures. The beads exhibit moduli of elasticity of 1-4 kPa, much larger than the moduli of conventional nonporous organogel beads formed at 20 °C. The gel particles also exhibit fast responsivity against the external stimulus (solvent change) due to their large pore volumes (4-7 ml/g). The gel beads prepared at −18 °C are very tough and can be compressed up to about 100% strain during which almost all the solvent content of the particles is released without any crack development. The sorption-squeezing cycles of the beads show that they can be used in separation processes in which the separated compounds can easily be recovered by compression of the beads under a piston.     

Phase separation of aqueous solution of methylcellulose

 As we determined visually by the temperature cloud point method, the coexistence phase curve of methylcellulose in aqueous solution belongs to the LCST (low critical solution temperature) type. Rheological dynamic measurements reveal the existence of three gel domains. The gel (I) localized in the homogeneous phase at low concentration and low temperature, is a very weak gel, where the cross-links are attributed to pairwise hydrophobic interactions between the most hydrophobic zones of the backbone: the trimethyl blocks. The second gel (II) was revealed in the high concentration regime and below the LCST, it may be attributed to the formation of crystallites which play the role of cross-linking points. The third gel was concomitant to the micro-phase separation. In these turbid gels, syneresis develops slowly with time: the higher the temperature and the lower the concentration, the faster the syneresis. Near the three sol–gel transitions, a power law frequency dependence of the loss and storage moduli was observed and the viscoelastic exponent Δ(G′∼G″∼ω^Δ) was found to be 0.76 and 0.8 and to reach 1 at high concentration. Received: 18 July 1996 Accepted: 17 February 1997     

Effect of carbon dioxide sorption on the phase behavior of weakly interacting polymer mixtures: Solvent‐induced segregation in deuterated polybutadiene/polyisoprene blends

The effect of carbon dioxide (CO₂) sorption on the lower critical solution temperatures of deuterated polybutadiene/polyisoprene blends was determined with in situ small‐angle neutron scattering. CO₂ was a poor solvent for both polymers and exhibited very weak selectivity between the blend components. The sorption of modest concentrations of CO₂, at pressures up to 160 bar, induced phase segregation at temperatures well below the binary‐phase‐separation temperature and caused an increased asymmetry in the lower critical solution temperature curve. The origin of solvent‐induced phase segregation in this weakly interacting polymer blend system was attributed predominantly to an exacerbation of the existing disparity in the compressibility of the components upon CO₂ sorption. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3114–3126, 2003     

Smart,Naturally-Derived Macromolecules for Controlled Drug Release

A series of troxerutin-based macromolecules with ten poly(acrylic acid) (PAA) or poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) homopolymer side chains were synthesized by a supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) approach. The prepared precisely-defined structures with low dispersity (M_w/M_n < 1.09 for PAA-based, and M_w/M_n < 1.71 for PDMAEMA-based macromolecules) exhibited pH-responsive behavior depending on the length of the polymer grafts. The properties of the received polyelectrolytes were investigated by dynamic light scattering (DLS) measurement to determine the hydrodynamic diameter and zeta potential upon pH changes. Additionally, PDMAEMA-based polymers showed thermoresponsive properties and exhibited phase transfer at a lower critical solution temperature (LCST). Thanks to polyelectrolyte characteristics, the prepared polymers were investigated as smart materials for controlled release of quercetin. The influence of the length of the polymer grafts for the quercetin release profile was examined by UV–VIS spectroscopy. The results suggest the strong correlation between the length of the polymer chains and the efficiency of active substance release, thus, the adjustment of the composition of the macromolecules characterized by branched architecture can precisely control the properties of smart delivery systems.     

Simulation of first- and second-order transitions in asymmetric polymer mixtures

The critical properties of dense asymmetric binary polymer mixtures are studied by grand canonical simulations within the framework of the 3-dimensional bond fluctuation lattice model. The monomers interact with each other via a potential ranging over the entire first peak of the pair distribution. An asymmetry is realized by giving the ratio of interactions λ = ∈_AA/∈_BB between monomers of the A-species and of the B-species a value different from 1. Using multiple histogram extrapolation techniques for the data analysis, the two phase region, which is a line of first-order transitions driven by the chemical potential difference, and the critical point are determined for a mixture of chains with 32 monomers each. At a critical potential difference Δμ_c unmixing occurs below a critical temperature T_c. It is found that Δμ_c is proportional to the asymmetry (1 - λ) and that the quantity 4k_BT_c/(3 + λ)∈ is independent of the asymmetry, consistent with the prediction of the Flory theory.     

Topological transformation of the phase diagram of the lithium nitrate-water-acetonitrile ternary system within the range of −20 to 50°C

Phase equilibria and critical phenomena in the lithium nitrate-water-acetonitrile ternary system were studied by a visual polythermal method within the range of ?20 to 50°C. In this ternary system, the constituent liquid binary system is characterized by phase separation with an upper critical solution temperature. It was found that the ternary system undergoes phase separation at temperatures below 0.7°C. In the phase diagram within the range of ?1.1 to 0.7°C, a closed phase separation region with two critical points was revealed. The temperature of the formation of the critical tie line of the monotectic state the solid phase of which is the crystalline hydrate LiNO₃ · 3H₂O was determined (?18.7°C). Depending on the concentration, lithium nitrate has both salting-in and salting-out effect on aqueous acetonitrile mixtures. The plotted isothermal sections of the temperature-concentration prism of the system at fifteen temperatures showed the pattern of the topological transformation of its phase diagram with varying temperature.     

Phase separation dynamics of a poly(vinyl methyl ether)/polystyrene (PVME/PS) blend studied by ultrafast differential scanning calorimetry

In this work, ultrafast differential scanning calorimetry (UFDSC) is used to study the dynamics of phase separation. Taking poly(vinyl methyl ether)/polystyrene (PVME/PS) blend as the example, we firstly obtained the phase diagram that has lower critical solution temperature (LCST), together with the glass transition temperature (T_g) of the homogeneous blend with different composition. Then, the dynamics of the phase separation of the PVME/PS blend with a mass ratio of 7:3 was studied in the time range from milliseconds to hours, by the virtue of small time and spatial resolution that UFDSC offers. The time dependence of the glass transition temperature (T_g) of PVME‐rich phase, shows a distinct change when the annealing temperature (T_a) changes from below to above 385 K. This corresponds to the transition from the nucleation and growth (NG) mechanism to the spinodal decomposition (SD) mechanism, as was verified by morphological and rheometric investigations. For the SD mechanism, the temperature‐dependent composition evolution in PVME‐rich domain was found to follow the Williams–Landel–Ferry (WLF) laws. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1357–1364     

Quinoline-cored Poly(Aryl Ether) Dendritic Organogels with Multiple Stimuli-Responsive and Adsorptive Properties

Functional supramolecular gel materials have potential applications in sensors, optical switches, artificial antennae, drug delivery and so on. In this paper, quinoline-cored poly(aryl ether) dendritic organogelators were designed, synthesized and fully characterized. The gelation behaviour of the dendritic organogelator was tested in organic solvents, mixed solvents and ionic liquids. The dendron Q-G1 was found to be an efficient and versatile organogelator toward various apolar and polar organic solvents with the critical gelation concentrations (CGCs) approaching 1.2×10^?2 mol/L, indicating one dendritic organogelator could immobilize 1.2×10³ solvent molecules in the organogel network. Interestingly, these dendrons exhibited excellent gel formation in ionic liquids. Notably, these dendritic organogels were found to display multiple stimuli-responsive properties toward external stimuli including heat, ultrasound and shear stress, with a reversible sol-gel phase transition. In addition, the dendritic organogel could effectively adsorb heavy metals and organic dyes. The removal rate of Pb²⁺ was up to 20% and the adsorption rate for Rhodamine B was as high as 89%.     

Phase separation time/temperature dependence of some thermoplastics-modified thermosetting systems

The phase separation processes of various thermoplastics-modified thermosetting systems which show upper critical solution temperature (UCST) or lower critical solution temperature (LCST) were studied with emphasis on the temperature dependency of the phase separation times. It was found that the phase separation time-temperature relationship follows the Arrhenius equation. The cure-induced phase separation activation energy E _a (ps) generated from the equation is independent of the method used to measure phase separation time. In our experimental ranges it is found that E _a (ps) is independent of the thermoplastic (TP) content, TP molecular weight and curing rate but it varies with the cure reaction kinetics and the chemical environments of the systems. __________ Translated from Acta Polymerica Sinica, 2007, 8: 725–730 [译自: 高分子学报]     

Study on nonlinear phase‐separation for PMMA/α‐MSAN blends by dynamic rheological and small angle light scattering measurements

The phase‐separation behavior of poly(methyl methacrylate)/poly(α‐methyl styrene‐co‐acrylonitrile) (PMMA/α‐MSAN) blends upon heating was studied through dynamic rheological measurements and time‐resolved small angle light scattering, as a function of temperatures and heating rates. The spinodal temperatures could be obtained by an examination of the anomalous critical viscoelastic properties in the vicinity of phase‐separation induced by the enhanced concentration fluctuation on the basis of the mean field theory. It is found that the dependence of the critical temperatures determined by dynamic rheological measurements and small angle light scattering on heating rates both deviates obviously from the linearity, even at the very low heating rates. Furthermore, the cloud‐point curves decrease gradually with the decrease of heating rates and present the trend of approaching T_gs of the blends. The nonlinear dependence is in consistence with that extracted from the isothermal phase‐separation behavior as reported in our previous paper. It is suggested that the equilibrium phase‐separation temperature could be hardly established by the linear extrapolating to zero in the plotting of cloud points versus heating rates. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1547–1555, 2006