A Stable and Conductive Metallophthalocyanine Framework for Electrocatalytic Carbon Dioxide Reduction in Water

Transformation of carbon dioxide to high value‐added chemicals becomes a significant challenge for clean energy studies. Here a stable and conductive covalent organic framework was developed for electrocatalytic carbon dioxide reduction to carbon monoxide in aqueous solution. The cobalt(II) phthalocyanine catalysts are topologically connected via robust phenazine linkage into a two‐dimensional tetragonal framework that is stable under boiling water, acid, or base conditions. The 2D lattice enables full π conjugation along x and y directions as well as π conduction along the z axis across the π columns. With these structural features, the electrocatalytic framework exhibits a faradaic efficiency of 96 %, an exceptional turnover number up to 320 000, and a long‐term turnover frequency of 11 412 hour^?1, which is a 32‐fold improvement over molecular catalyst. The combination of catalytic activity, selectivity, efficiency, and durability is desirable for clean energy production.     

基于流动池的电化学二氧化碳还原研究进展

采用电化学方法将二氧化碳（CO₂）还原转化为基础化学品或碳基燃料是目前极具前景的碳资源利用新方式. 考虑到该技术未来的发展方向和大规模应用需求,人们亟需开发具有高转化效率和高稳定性的电解设备. 在本文中,作者详细介绍了现阶段发展的两种流动池的结构特点及性能优势,阐述了每种反应体系的内在局限性, 深入分析了整个反应体系所用组件（电解池、气体扩散电极、离子交换膜）对于性能的影响. 最后,针对目前该领域存在的挑战及未来发展趋势进行了总结与展望.     

Metal–Organic Layers Leading to Atomically Thin Bismuthene for Efficient Carbon Dioxide Electroreduction to Liquid Fuel

Electrochemical reduction of CO₂ to valuable fuels is appealing for CO₂ fixation and energy storage. However, the development of electrocatalysts with high activity and selectivity in a wide potential window is challenging. Herein, atomically thin bismuthene (Bi‐ene) is pioneeringly obtained by an in situ electrochemical transformation from ultrathin bismuth‐based metal–organic layers. The few‐layer Bi‐ene, which possesses a great mass of exposed active sites with high intrinsic activity, has a high selectivity (ca. 100 %), large partial current density, and quite good stability in a potential window exceeding 0.35 V toward formate production. It even deliver current densities that exceed 300.0 mA cm^?2 without compromising selectivity in a flow‐cell reactor. Using in situ ATR‐IR spectra and DFT analysis, a reaction mechanism involving HCO₃^? for formate generation was unveiled, which brings new fundamental understanding of CO₂ reduction.     

Acid–Base Interaction Enhancing Oxygen Tolerance in Electrocatalytic Carbon Dioxide Reduction

Hybrid electrodes with improved O₂ tolerance and capability of CO₂ conversion into liquid products in the presence of O₂ are presented. Aniline molecules are introduced into the pore structure of a polymer of intrinsic microporosity to expand its gas separation functionality beyond pure physical sieving. The chemical interaction between the acidic CO₂ molecule and the basic amino group of aniline renders enhanced CO₂ separation from O₂. Loaded with a cobalt phthalocyanine-based cathode catalyst, the hybrid electrode achieves a CO Faradaic efficiency of 71 % with 10 % O₂ in the CO₂ feed gas. The electrode can still produce CO at an O₂/CO₂ ratio as high as 9:1. Switching to a Sn-based catalyst, for the first time O₂-tolerant CO₂ electroreduction to liquid products is realized, generating formate with nearly 100 % selectivity and a current density of 56.7 mA cm⁻² in the presence of 5 % O₂.     

Electrochemical Reduction of Carbon Dioxide to Methanol on Hierarchical Pd/SnO2 Nanosheets with Abundant Pd–O–Sn Interfaces

Electrochemical conversion of CO₂ into fuels using electricity generated from renewable sources helps to create an artificial carbon cycle. However, the low efficiency and poor stability hinder the practical use of most conventional electrocatalysts. In this work, a 2D hierarchical Pd/SnO₂ structure, ultrathin Pd nanosheets partially capped by SnO₂ nanoparticles, is designed to enable multi‐electron transfer for selective electroreduction of CO₂ into CH₃OH. Such a structure design not only enhances the adsorption of CO₂ on SnO₂, but also weakens the binding strength of CO on Pd due to the as‐built Pd–O–Sn interfaces, which is demonstrated to be critical to improve the electrocatalytic selectivity and stability of Pd catalysts. This work provides a new strategy to improve electrochemical performance of metal‐based catalysts by creating metal oxide interfaces for selective electroreduction of CO₂.     

Bifunctional Acid–Base Ionic Liquid Organocatalysts with a Controlled Distance Between Acid and Base Sites

Bifunctional acid–base ionic liquid organocatalysts with different distances between the two sites have been synthesised, and their activity for the Knoevenagel condensation has been tested. As has been found to be the case with enzymes, the distance between the acidic and basic sites determines the activity of the bifunctional organocatalyst, and at the optimal distance the reaction rate increases by two orders of magnitude with respect to the purely acidic or basic counterpart organocatalysts. The experimental results have been rationalised through the study of the reaction mechanism of the Knoevenagel condensation between malononitrile and benzaldehyde by means of DFT calculations. It has been found that it consists of two consecutive steps. First, deprotonation of malononitrile on the basic site to obtain a methylene carbanion intermediate takes place, and second, co‐adsorption and activation of benzaldehyde on the acid centre of this intermediate followed by the C? C bond‐formation reaction. The calculations and the kinetic study indicate that there is an inversion of the rate‐controlling step when the distance between the acidic and the basic sites is modified, with a direct implication on the reaction rate.     

Metal–Organic Framework for Emulsifying Carbon Dioxide and Water

Forming emulsions of carbon dioxide (CO₂) and water can largely expand the utility of CO₂. Herein we propose for the first time the utilization of a metal–organic framework (MOF) for emulsifying CO₂ and water. Owing to the hybrid composition, MOF particles can easily assemble at the CO₂/water interface to create a rigid protective barrier around the dispersed droplet. The MOF‐stabilized CO₂ and water emulsion has exceptional stability compared to those emulsions stabilized by surfactants or other solids. Moreover, the CO₂ and water emulsion stabilized by MOF is “tunable” due to the designable features of MOFs and adjustable character of CO₂. Such a novel kind of emulsion composed of CO₂, water, and MOF provides a facile route for constructing MOF superstructures with many advantages. The macroporous networks and hollow capsules of different kinds of MOFs have been successfully derived from CO₂ and water emulsions.     

Partially Oxidized Palladium Nanodots for Enhanced Electrocatalytic Carbon Dioxide Reduction

Here we report a partially oxidized palladium nanodot (Pd/PdO_x) catalyst with a diameter of around 4.5 nm. In aqueous CO₂‐saturated 0.5 m KHCO₃, the catalyst displays a Faradaic efficiency (FE) of 90 % at −0.55 V vs. reversible hydrogen electrode (RHE) for carbon monoxide (CO) production, and the activity can be retained for at least 24 h. The improved catalytic activity can be attributed to the strong adsorption of CO₂^.− intermediate on the Pd/PdO_x electrode, wherein the presence of Pd²⁺ during the electroreduction reaction of CO₂ may play an important role in accelerating the carbon dioxide reduction reaction (CO₂RR). This study explores the catalytic mechanism of a partially oxidized nanostructured Pd electrocatalyst and provides new opportunities for improving the CO₂RR performance of metal systems.     

Copper–Organic Framework Fabricated with CuS Nanoparticles: Synthesis,Electrical Conductivity,and Electrocatalytic Activities for Oxygen Reduction Reaction

To apply electrically nonconductive metal–organic frameworks (MOFs) in an electrocatalytic oxygen reduction reaction (ORR), we have developed a new method for fabricating various amounts of CuS nanoparticles (nano‐CuS) in/on a 3D Cu–MOF, [Cu₃(BTC)₂?(H₂O)₃] (BTC=1,3,5‐benzenetricarboxylate). As the amount of nano‐CuS increases in the composite, the electrical conductivity increases exponentially by up to circa 10⁹‐fold, while porosity decreases, compared with that of the pristine Cu‐MOF. The composites, nano‐CuS(x wt %)@Cu‐BTC, exhibit significantly higher electrocatalytic ORR activities than Cu‐BTC or nano‐CuS in an alkaline solution. The onset potential, electron transfer number, and kinetic current density increase when the electrical conductivity of the material increases but decrease when the material has a poor porosity, which shows that the two factors should be finely tuned by the amount of nano‐CuS for ORR application. Of these materials, CuS(28 wt %)@Cu‐BTC exhibits the best activity, showing the onset potential of 0.91 V vs. RHE, quasi‐four‐electron transfer pathway, and a kinetic current density of 11.3 mA cm^?2 at 0.55 V vs. RHE.     

Acid–Base‐Responsive Intense Charge‐Transfer Emission in Donor–Acceptor‐Conjugated Fluorophores

Herein we report on the synthesis and acid‐responsive emission properties of donor–acceptor (D–A) molecules that contain a thienothiophene unit. 2‐Arylthieno[3,2‐b]thiophenes were conjugated with an N‐methylbenzimidazole unit to form acid‐responsive D–A‐type fluorophores. The D–A‐conjugated fluorophores showed intense intramolecular charge‐transfer (ICT) emission in response to acid. The effect of the substitution on their photophysical properties as well as their solvent‐dependence indicated non‐twisting ICT emission in protonated D–A molecules. The quinoidal character of 2‐arylthienothiophene as a donor part is discussed, as it is assumed that it contributes to suppression of the molecular twisting in the excited state, therefore decreasing the nonradiative rate constant, thereby resulting in the intense ICT emission. Acid–base‐sensitive triple‐color emission was also achieved by the introduction of a base‐responsive phenol group in the donor part.     

Electrocatalytic CO2 Reduction with a Half‐Sandwich Cobalt Catalyst: Selectivity towards CO

We present herein a Cp*Co(III)‐half‐sandwich catalyst system for electrocatalytic CO₂ reduction in aqueous acetonitrile solution. In addition to an electron‐donating Cp* ligand (Cp*=pentamethylcyclopentadienyl), the catalyst featured a proton‐responsive pyridyl‐benzimidazole‐based N,N‐bidentate ligand. Owing to the presence of a relatively electron‐rich Co center, the reduced Co(I)‐state was made prone to activate the electrophilic carbon center of CO₂. At the same time, the proton‐responsive benzimidazole scaffold was susceptible to facilitate proton‐transfer during the subsequent reduction of CO₂. The above factors rendered the present catalyst active toward producing CO as the major product over the other potential 2e/2H⁺ reduced product HCOOH, in contrast to the only known similar half‐sandwich CpCo(III)‐based CO₂‐reduction catalysts which produced HCOOH selectively. The system exhibited a Faradaic efficiency (FE) of about 70% while the overpotential for CO production was found to be 0.78 V, as determined by controlled‐potential electrolysis.     

A Stable Metal–Organic Framework Featuring a Local Buffer Environment for Carbon Dioxide Fixation

A majority of metal–organic frameworks (MOFs) fail to preserve their physical and chemical properties after exposure to acidic, neutral, or alkaline aqueous solutions, therefore limiting their practical applications in many areas. The strategy demonstrated herein is the design and synthesis of an organic ligand that behaves as a buffer to drastically boost the aqueous stability of a porous MOF (JUC‐1000), which maintains its structural integrity at low and high pH values. The local buffer environment resulting from the weak acid–base pairs of the custom‐designed organic ligand also greatly facilitates the performance of JUC‐1000 in the chemical fixation of carbon dioxide under ambient conditions, outperforming a series of benchmark catalysts.     

Catholyte‐Free Electrocatalytic CO2 Reduction to Formate

Electrochemical reduction of carbon dioxide (CO₂) into value‐added chemicals is a promising strategy to reduce CO₂ emission and mitigate climate change. One of the most serious problems in electrocatalytic CO₂ reduction (CO₂R) is the low solubility of CO₂ in an aqueous electrolyte, which significantly limits the cathodic reaction rate. This paper proposes a facile method of catholyte‐free electrocatalytic CO₂ reduction to avoid the solubility limitation using commercial tin nanoparticles as a cathode catalyst. Interestingly, as the reaction temperature rises from 303 K to 363 K, the partial current density (PCD) of formate improves more than two times with 52.9 mA cm^?2, despite the decrease in CO₂ solubility. Furthermore, a significantly high formate concentration of 41.5 g L^?1 is obtained as a one‐path product at 343 K with high PCD (51.7 mA cm^?2) and high Faradaic efficiency (93.3 %) via continuous operation in a full flow cell at a low cell voltage of 2.2 V.     

Cooperative Acid–Base Effects with Functionalized Mesoporous Silica Nanoparticles: Applications in Carbon–Carbon Bond‐Formation Reactions

Acid–base bifunctional mesoporous silica nanoparticles (MSN) were prepared by a one‐step synthesis by co‐condensation of tetraethoxysilane (TEOS) and silanes possessing amino and/or sulfonic acid groups. Both the functionality and morphology of the particles can be controlled. The grafted functional groups were characterized by using solid‐state ²⁹Si and ¹³C cross‐polarization/magic angle spinning (CP/MAS) NMR spectroscopy, thermal analysis, and elemental analysis, whereas the structural and the morphological features of the materials were evaluated by using XRD and N₂ adsorption–desorption analyses, and SEM imaging. The catalytic activities of the mono‐ and bifunctional mesoporous hybrid materials were evaluated in carbon–carbon coupling reactions like the nitroaldol reaction and the one‐pot deacetalization–nitroaldol and deacetalization–aldol reactions. Among all the catalysts evaluated, the bifunctional sample containing amine and sulfonic acid groups (MSN–NNH₂–SO₃H) showed excellent catalytic activity, whereas the homogeneous catalysts were unable to initiate the reaction due to their mutual neutralization in solution. Therefore a cooperative acid–base activation is envisaged for the carbon–carbon coupling reactions.     

单原子催化剂电催化还原二氧化碳研究进展

电催化CO₂还原能够在常温常压下利用电能将CO₂转化为含碳清洁能源,具有很好的应用前景。 但其应用仍受缓慢的阴极催化剂限制。众所周知,催化剂的尺寸对其活性有很大的影响,将金属催化剂减少到纳米颗粒级别,能够显著提升其暴露的活性位点数和本征活性,从而提升其催化性能。在这一思路下,如果将催化剂的尺寸降低到单原子分散级别,催化剂的活性能够得到明显提升。近几年,由于单原子分散催化剂具有特殊的微观几何结构和电子态,已经成为电催化还原CO₂领域的研究热点。在本综述中,对单原子分散催化剂在电催化还原CO₂方面的研究进行了总结和回顾,并对未来单原子分散催化剂在电催化还原CO₂领域的难点问题和进一步研究方向进行了分析和讨论。     

Maximizing Electroactive Sites in a Three-Dimensional Covalent Organic Framework for Significantly Improved Carbon Dioxide Reduction Electrocatalysis

Synthesis of functional 3D COFs with irreversible bond is challenging. Herein, 3D imide-bonded COFs were constructed via the imidization reaction between phthalocyanine-based tetraanhydride and 1,3,5,7-tetra(4-aminophenyl)adamantine. These two 3D COFs are made up of interpenetrated pts networks according to powder X-ray diffraction and gas adsorption analyses. CoPc-PI-COF-3 doped with carbon black has been employed to fabricate the electrocatalytic cathode towards CO₂ reduction reaction within KHCO₃ aqueous solution, displaying the Faradaic efficiency of 88–96 % for the CO₂-to-CO conversion at the voltage range of ca. ?0.60 to ?1.00 V (vs. RHE). In particular, the 3D porous structure of CoPc-PI-COF-3 enables the active electrocatalytic centers occupying 32.7 % of total cobalt-phthalocyanine subunits, thus giving a large current density (j_CO) of ?31.7 mA cm^?2 at ?0.90 V. These two parameters are significantly improved than the excellent 2D COF analogue (CoPc-PI-COF-1, 5.1 % and ?21.2 mA cm^?2).     

Molybdenum–Bismuth Bimetallic Chalcogenide Nanosheets for Highly Efficient Electrocatalytic Reduction of Carbon Dioxide to Methanol

Methanol is a very useful platform molecule and liquid fuel. Electrocatalytic reduction of CO₂ to methanol is a promising route, which currently suffers from low efficiency and poor selectivity. Herein we report the first work to use a Mo‐Bi bimetallic chalcogenide (BMC) as an electrocatalyst for CO₂ reduction. By using the Mo‐Bi BMC on carbon paper as the electrode and 1‐butyl‐3‐methylimidazolium tetrafluoroborate in MeCN as the electrolyte, the Faradaic efficiency of methanol could reach 71.2 % with a current density of 12.1 mA cm^?2, which is much higher than the best result reported to date. The superior performance of the electrode resulted from the excellent synergistic effect of Mo and Bi for producing methanol. The reaction mechanism was proposed and the reason for the synergistic effect of Mo and Bi was discussed on the basis of some control experiments. This work opens a way to produce methanol efficiently by electrochemical reduction of CO₂.