功能单体对分子烙印手性固定相手性拆分能力的影响

系统考察了功能单体对非共价分子烙印手性固定相手性分离能力的影响,发现在非共价分子烙印手性固定相的制备中,功能单体与烙印分子之间存在着匹配性。丙烯酰胺可以与氨基酸衍生物的酰胺基团形成较强的氢键作用,碱性功能单体2-乙烯基吡啶则与其羧基形成较离子作用,两者的协同作用使复合功能单体丙烯酰胺+2-乙烯基吡啶对于氨基酸衍生物具有良好的烙印效果。竞争溶剂乙酸对样品与分子固定相间的非共价作用力有较大的影响,增加流动相中的竞争溶剂乙酸的含量,将减弱分子手性固定相与样品的酰胺键和羧基的氢键及离子作用,导致对样品的容量因子、手性选择性α及分离度f/g的减小。     

不同功能单体合成的分子印迹聚合物识别性能的研究

采用分子印迹技术,用不同的功能单体合成了槲皮素的分子印迹聚合物,测定了它们的吸附性能,并考察了模板分子与功能单体相互作用与印迹聚合物吸附性能的关系。结果表明:在四氢呋喃-氯仿(V/V 8:2)的溶剂体系中以2-乙烯基吡啶(2-VP)为功能单体合成的分子印迹聚合物的吸附性能最强,吸附量为4457.52(μg)/g,通过紫外光谱法测定的结果,在该条件下槲皮素与2-乙烯基吡啶的作用力也是较强的。     

一种新型手性功能单体的合成

以手性芳胺为母体,丙烯酰氯为酰化试剂,合成了新型手性功能单体(1)。用1合成了一系列手性分子印迹聚合物。1的结构经1H NMR,IR,MS及元素分析确证。     

药物利多卡因分子印迹聚合物的制备及识别特性

利多卡因与甲基丙烯酸为功能单体分别在低温(0～4℃)紫外光照、加热条件下制备利多卡因分子印迹聚合物,实验结果通过Scatchard方程分析可知,低温紫外光照下制备的利多卡因MIP对利多卡因具有良好的选择性,并可进一步应用于临床利多卡因药物的分离富集和检测.     

脂肪族方酰胺多齿配体的合成

曾合成并研究了以1,3-双苯氨基方酸内翁盐为骨架,在苯环的2-位对称引入多甘醇醚链的双臂型方酰胺多齿配体,其中某些化合物既能作为配体对UO~2^2^+及ZγO^2^+等刚性离子配位,又能与配体NH~3发生作用,以它作为中性载体的氨选择性电极可望用于NH~3的测定。在脂肪胺的方酸内翁盐型多齿配体中,因无芳环的共轭,四碳环及其上氧之电荷状态将有所不同,这必将影响整个分子的性质。本文对这类化合物的合成进行探索,找到了行之有效的合成方法,并由此制得了九个方酰胺配体5(a～i),其中5i可作为聚酰胺等的稳定剂,其余均未见文献报道。     

A computational and experimental investigation of the interaction between the template molecule and the functional monomer used in the molecularly imprinted polymer

A computational approach to screening monomer for preparing molecularly imprinted polymer (MIP) was proposed, using the binding energy, ΔE, of a template molecule and a monomer as a measure of their interaction. For a specified template molecule, a monomer of higher ΔE is suitable for preparing the MIP. To examine the validity of this approach, theophylline (THO) was chosen as the template molecule and methacrylic acid (MAA), acrylamide (AA) and 2-(trifluoromethyl)acrylic acid (TFMAA) were as the functional monomers, respectively. Density functional theory (DFT) at B3LYP/6-31+G**//B3LYP/3-21G level was used to calculate ΔE. It was shown that TFMAA gave the largest ΔE while AA gave the smallest. The details of the interaction between the THO with these monomers were also given by this computing approach. The adsorption of THO on the MIP synthesized using different monomers was studied. The MIP synthesized using TFMAA as monomer showed the highest selectivity to THO while the MIP from AA gave the lowest, as predicted from the ΔE calculation. ¹H NMR spectroscopy showed that, compared to MAA and AA, a stronger H-bond interaction is formed between TFMAA and THO. FT-IR analysis of the MIPs prepared using these three monomers confirmed the existence of CO and OH groups, which forms H-bond with THO. The results described above have given an insight into the interaction between THO and the monomers, and shown the use of ΔE to facilitate the selection of monomers for the synthesis of MIP.     

Molecularly imprinted polymer using beta-cyclodextrin as functional monomer for the efficient recognition of bilirubin

Bilirubin (BR) imprinted polymer was successfully prepared using supramolecular host compound β-cyclodextrin (β-CD) as functional monomer. The adsorption equilibrium was attained in about 4 h, which indicated that the adsorption kinetics was comparatively fast. The results of adsorption and selectivity experiments indicated that BR-imprinted β-CD polymer was able to bind BR specifically and reversibly. The specific recognition of BR-imprinted β-CD polymer for BR may be due to the cooperative effects of inclusion interaction and hydrogen bonding. This BR-imprinted β-CD polymer was further applied to eliminate BR in human serum sample. It was verified that the binding specificity of the BR-imprinted polymer for BR was essentially sufficient in the presence of other compounds coexisting in serum sample. Therefore, as a reusable material possessing high affinity and selectivity, BR-imprinted β-CD polymer has a potential application perspective as a clinical hemoperfusion material.     

Molecularly Imprinted Polymer with Calix[4]arene Derivative for the Recognition of Acetanilide

Two molecularly imprinted polymers binding to analgesic acetanilide were prepared using either dual functional monomers of calix[4]arene derivative and acrylamide or single monomer acrylamide, respectively. The polymers were ground, sieved and investigated by equilibrium binding experiment to evaluate their recognition properties for the template and other substrates. Scatchard analysis showed that homogeneous recognition sites were formed in the imprinted polymer matrix. Our results demonstrated that the polymer using two functional monomers exhibited better selectivity for the template. This study may open new frontiers for the development and application of imprinted polymers, such as drug separation and purification.     

复合碱性功能单体分子烙印手性固定相

采用丙烯酰胺+2-乙烯基吡啶的复合碱性功能单体体系制备了氨基酸衍生物分子烙印高效液相色谱手性固定相。在优化了功能单体与烙印分子的比例条件下对于烙印分子及其结构相似的对映体具有良好的手性分离能力。考察了烙印分子的化学基团对手性分离的影响,发现氢键作用力和较强的离子作用力在手性分离过程中均有贡献。     

离子印迹材料的发展及在识别吸附重金属中的应用

金属离子的识别和选择性研究仍是当前水体金属离子污染分析中一大挑战。离子印迹材料具有制备简单、结构稳定、识别性强、吸附速率快、吸附容量大和易回收等特点,在离子分离、富集和传感识别等领域受到广泛的关注。在过去的研究中,有两方面重点内容始终贯穿离子印迹材料的发展历程。一是印迹材料的制备过程的优化,二是识别性能以及识别机理的研究。本文按照时间轴的顺序对离子印迹材料的发展进行综述,并重点归纳了制备过程和识别机理的研究进展。另外对现阶段离子印迹材料在识别吸附重金属中的应用进行了总结和展望。     

Novel functional monomer for the electrochemical synthesis of highly affine epitope-imprinted polymers

To address the lack of functional monomer diversity for the electrosynthesis of protein-selective molecularly imprinted polymers (MIPs), we introduce a new concept able to lead to a new class of functional monomers. This is based on conjugating an electropolymerizable monomer unit (umbelliferone) to an amino acid for closer mimicking of protein-based natural affinity ligands such as antibodies. As the first representative of this class of monomers an aspartate-umbelliferone (Asp-UMB) conjugate was synthesized and here we provide the proof for its suitability to generate highly affine MIPs for proteins by epitope imprinting. As model we used a heptapeptide (GFNCYFP) stemming from the receptor binding domain (RBD) of the SARS-CoV-2 spike protein to generate epitope-imprinted polymers able to recognize the parent RBD protein. For rapid optimization and assessment of the binding kinetics we prepared MIP microarrays on surface plasmon resonance imaging (SPRi) chips. First the peptides were microspotted on the bare gold surface of the chips followed by the electropolymerization of Asp-UMB. This resulted in ca. 2 nm thick, highly uniform, and electrically insulating polymer film, well suited both for hierarchical epitope imprinting and SPRi read-out. Taking advantage also of the on-chip optimization enabled by the microarray format the increased functional diversity of the new monomer resulted in highly affine MIPs with equilibrium dissociation constants in the lower picomolar range.     

除草剂青莠定分子印迹聚合物的合成及结合性能研究

采用分子印迹技术,分别以α-甲基丙烯酸和4-乙烯基吡啶为功能单体,合成了两种对除草剂青莠定具有选择性结合能力的分子印迹聚合物．紫外光度法研究显示了模板分子青莠定和4-乙烯基吡啶的离子作用强于它和α-甲基丙烯酸之间的氢键作用,并用平衡结合实验研究了不同功能单体的聚合物对模板分子的结合能力和对底物的选择性,结果表明以4-乙烯基吡啶为功能单体合成的分子印迹聚合物对青莠定表现出更高的结合能力和更优的选择性．这对分子印迹技术用于环境样品中除草剂青莠定的分离和富集具有重要意义。     

分子印迹技术研究进展

分子印迹技术是制备对特定目标分子具有特异性识别能力的高分子材料的技术,所制备的高分子材料被称为分子印迹聚合物.分子印迹聚合物因具有预定性、识别性和实用性三大优点已广泛应用于分离、模拟抗体与受体、催化剂以及仿生传感器等方面和领域,显示出了广泛的应用前景.作者对分子印迹技术的发展历史、基本原理、分类、应用现状以及一些新的研究热点进行了综述.     

乙酰水杨酸分子印迹聚合物的合成及性能研究

采用分子印迹技术,以乙酰水杨酸为模板分子,1,4-二乙烯基苯为交联剂,分别以α-甲基丙烯酸和丙烯酰胺为功能单体,合成了对乙酰水杨酸具有特异性吸附能力的两种分子印迹聚合物;它们对乙酰水杨酸都存在两类不同亲和性的结合位点,其中用丙烯酰胺合成的分子印迹聚合物对模板分子乙酰水杨酸的氢键作用力和结合能力都比用α-甲基丙烯酸合成的聚合物强。这对分子印迹技术用于环境、血液等复杂样品中乙酰水杨酸的分离和富集具有重要意义。     

Tailor‐Made Molecularly Imprinted Polymer for Selective Recognition of the Urinary Tumor Marker Pseudouridine

Pseudouridine (Ψ) is an important urinary cancer biomarker, especially in human colorectal cancer (CRC). Disclosed herein is the first Ψ molecularly imprinted polymer (Ψ‐MIP) material obtained from tailor‐engineered functional monomers. The resulting MIP imprint exhibits a remarkable imprinting factor greater than 70. It is successfully used for the selective recognition of Ψ in spiked human urine. This selective functionalized material opens the route to the development of inexpensive disposable chemosensors for noninvasive CRC diagnosis and prognosis.     

以混旋邻氯扁桃酸为模板的分子印迹聚合物的制备及拆分性能研究

以混旋邻氯扁桃酸为模板分子和合成的(S)-(1-萘乙基)-丙烯酰胺为手性功能 单体制备分子印迹聚合物作为色谱固定相，对混旋邻氯扁桃酸有较好的拆分能力， 分离因子α达到1.36。但对模板分子的类似物混旋扁桃酸和对氯扁桃酸没有拆分能 力。用Hyperchem软件模拟了(S)-邻氯扁桃酸与(S)-(1-萘乙基)-丙烯酰胺形成的复 合物的结构模型，其在聚合物母体中留下的具有立体构型和作用力双重识别的S-S 型空穴，对(S)-邻氯扁桃酸有较强的保留作用，从而达到对混旋物拆分的目的。     

磺胺二甲嘧啶分子印迹聚合物的合成及其识别性能

磺胺二甲嘧啶分子印迹聚合物的合成及其识别性能;磺胺二甲嘧啶;分子印迹聚合物;硅胶;分子识别     

Synthesis of novel chiral N, P-containing multidentate ligands and their applications in asymmetric transfer hydrogenation

Novel chiral PN₄-type multidentate aminophosphine ligands have been successfully synthesized by Schiff-base condensation of bis（o-formylphenyl）phenylphosphane and various chiral amino-sulfonamides.Their structures were fully characterized by IR,EI-MS and NMR.The catalytic systems,prepared in situ from the multidentate ligands and iridium（I） complexes,showed high activity in asymmetric transfer hydrogenation of propiophenone in 2-propanol solution,leading to corresponding optical alcohol with up to 75%ee.     

Mononuclear and three‐dimensional metal complexes based on a multidentate hydrazone ligand

A potentially pentadentate hydrazone ligand, N′‐[1‐(pyrazin‐2‐yl)ethylidene]nicotinohydrazide (HL), was prepared from the condensation reaction of nicotinohydrazide and acetylpyrazine. Reactions of HL with MnCl₂, Mn(CH₃COO)₂ and Cd(CH₃COO)₂ afforded three metal complexes, namely dichlorido{N′‐[1‐(pyrazin‐2‐yl‐κN¹)ethylidene]nicotinohydrazide‐κ²N′,O}manganese(II), [MnCl₂(C₁₂H₁₁N₅O)], (I), bis{N′‐[1‐(pyrazin‐2‐yl‐κN¹)ethylidene]nicotinohydrazidato‐κ²N′,O]manganese(II), [Mn(C₁₂H₁₀N₅O)₂], (II), and poly[[(acetato‐κ²O,O′){μ₃‐N′‐[1‐(pyrazin‐2‐yl‐κ²N¹:N⁴)ethylidene]nicotinohydrazidato‐κ³N′,O:N¹}cadmium(II)] chloroform disolvate], {[Cd(C₁₂H₁₀N₅O)(CH₃COO)]·2CHCl₃}_n, (III), respectively. Complex (I) has a mononuclear structure, the Mn^II centre adopting a distorted square‐pyramidal coordination. Complex (II) also has a mononuclear structure, with the Mn^II centre occupying a special position (C₂ symmetry) and adopting a distorted octahedral coordination environment, which is defined by two O atoms and four N atoms from two N′‐[1‐(pyrazin‐2‐yl)ethylidene]nicotinohydrazidate (L⁻) ligands related via a crystallographic twofold axis. Complex (III) features a unique three‐dimensional network with rectangular channels, and the L⁻ ligand also serves as a counter‐anion. The coordination geometry of the Cd^II centre is pentagonal bipyramidal. This study demonstrates that HL, which can act as either a neutral or a mono‐anionic ligand, is useful in the construction of interesting metal–organic compounds.