A Fluorescent Chemosensor for Dihydrogen Phosphate Ion Based on 2‐[2‐Hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine‐Fe3+ Ensemble

A long wavelength emission fluorescent (612 nm) chemosensor with high selectivity for H₂PO₄^? ions was designed and synthesized according to the excited state intramolecular proton transfer (ESIPT). The sensor can exist in two tautomeric forms ('keto' and 'enol') in the presence of Fe³⁺ ion, Fe³⁺ may bind with the 'keto' form of the sensor. Furthermore, the in situ generated GY‐Fe³⁺ ensemble could recover the quenched fluorescence upon the addition of H₂PO₄^? anion resulting in an off‐on‐type sensing with a detection limit of micromolar range in the same medium, and other anions, including F^?, Cl^?, Br^?, I^?, AcO^?, HSO₄^?, ClO₄^? and CN^? had nearly no influence on the probing behavior. The test strips based on 2‐[2‐hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine and Fe³⁺ metal complex ( GY‐Fe³⁺ ) were fabricated, which could act as convenient and efficient H₂PO₄^? test kits.     

新型三脚架苯甲醛苯腙醋酸根选择性比色化学传感器

本文合成了一个新的基于三脚架苯甲醛苯腙的能够选择地检测醋酸根离子的比色化学传感器1。用紫外可见吸收光谱证实了受体1在二甲基亚砜溶液中对醋酸根离子高选择的键合能力超越了其它阴离子。和其他所研究的阴离子相比,其在二甲基亚砜中紫外可见吸收光谱对具有高选择性醋酸根离子的存在显示了应答,当存在（2´10^-5mol·dm^-3）醋酸根离子时其溶液的颜色也由黄色变化到蓝色。当用其他不同的客体阴离子（F^-, Cl^-, Br^-, I^-, H₂PO₄ ^–和 OH^-）处理受体1时,仅出现了很小的紫外可见吸收光谱变化。受体1对醋酸根的结合常数 K_ass为1.69´ 10⁴。     

A Fluorescent Ditopic Rotaxane Ion‐Pair Host

We report a rotaxane based on a simple urea motif that binds Cl^? selectively as a separated ion pair with H⁺ and reports the anion binding event through a fluorescence switch‐on response. The host selectively binds Cl^? over more basic anions, which deprotonate the framework, and less basic anions, which bind more weakly. The mechanical bond also imparts size selectivity to the ditopic host.     

Synthesis,Bioactivity, and the Anion‐Binding Property of 2‐Sulfydryl‐1,3,4‐thiodiazole Derivatives

Two new compounds ( 1 and 2 ) containing 2‐sulfydryl‐1,3,4‐thiodiazole have been synthesized and optimized. They both showed wide antibacterial activity for colon bacillus, Staphylococcus aureus, S. albus, dysentery bacillus and inferior activity for Bacillus subtilis. In addition, their binding properties were evaluated for biologically important anions (F^–, Cl^–, Br^–, I^–, AcO^–, and H₂PO₄^–) by theoretical investigation, UV–vis, fluorescence, and ¹H NMR titration experiments, and they displayed strong binding ability for H₂PO₄^– without the interference of other anions tested. Especially the binding ability of compound 2 containing anthracene with H₂PO₄^– was 1000 times stronger than that of compound 1 containing nitrobenzene. Two compounds based on 2‐sulfydryl‐1,3,4‐thiodiazole have both properties of anion recognition and antibacterial activity.     

Reaction‐Based Colorimetric and Ratiometric Fluorescence Sensor for Detection of Cyanide in Aqueous Media

A stilbene‐based compound ( 1 ) has been prepared and was highly selective for the detection of cyanide anion in aqueous media even in the presence of other anions, such as F^?, Cl^?, Br^?, I^?, ClO₄^?, H₂PO₄^?, HSO₄^?, NO₃^?, and CH₃CO₂^?. A noticeable change in the color of the solution, along with a prominent fluorescence enhancement, was observed upon the addition of cyanide. The color change was observed upon the nucleophilic addition of the cyanide anion to the electron‐deficient cyanoacrylate group of 1 . The spectral changes induced by the reaction were analyzed by comparison with two model compounds, such as compound 2 with dimethyl substituents and compound 3 without a cyanoacrylate group. An intramolecular charge‐transfer (ICT) mechanism played a key role in the sensing properties, and the mechanism was supported by DFT/TDDFT calculations.     

Enhanced Lithium‐Ion Conductivity of Polymer Electrolytes by Selective Introduction of Hydrogen into the Anion

The anion chemistry of lithium salts plays a pivotal role in dictating the physicochemical and electrochemical performance of solid polymer electrolytes (SPEs), thus affecting the cyclability of all‐solid‐state lithium metal batteries (ASSLMBs). The bis(trifluoromethanesulfonyl)imide anion (TFSI^?) has long been studied as the most promising candidate for SPEs; however, the Li‐ion conductivities of the TFSI‐based SPEs still remain low (Li‐ion transference number: ca. 0.2). In this work, we report new hydrogen‐containing anions, conceived based on theoretical considerations, as an electrolyte salt for SPEs. SPEs comprising hydrogen‐containing anions achieve higher Li‐ion conductivities than TFSI‐based ones, and those anions are electrochemically stable for various kinds of ASSLMBs (Li–LiFePO₄, Li–S, and Li–O₂ batteries). This opens up a new avenue for designing safe and high‐performance ASSLMBs in the future.     

C3i‐Symmetric Octanuclear Cadmium Cages: Double‐Anion‐Templated Synthesis,Formation Mechanism,and Properties

A series of C_3i‐symmetric bicapped trigonal antiprismatic Cd₈ cages [2X@Cd₈L₆(H₂O)₆] ? n Y ? solvents (X=Cl^?, Y=NO₃^?, n=2: MOCC‐4 ; X=Br^?, Y=NO₃^?, n=2: MOCC‐5 ; X=NO₃^?, Y=NO₃^?, n=2: MOCC‐6 ; X=NO₃^?, Y=BF₄^?, n=2: MOCC‐7 ; X=NO₃^?, Y=ClO₄^?, n=2: MOCC‐8 ; X=CO₃^2?, n=0: MOCC‐9 ), doubly anion templated by different anions, were solvothermally synthesized by means of a flexible ligand. Interestingly, the CO₃^2? template for MOCC‐9 was generated in situ by two‐step decomposition of DMF solvent. For other MOCCs, spherical or trigonal monovalent anions could also play the role of template in their formation. The template abilities of these anions in the formation of the cages were experimentally studied and are discussed for the first time. Anion exchange of MOCC‐8 was carried out and showed anion‐size selectivity. All of the cage‐like compounds emit strong luminescence at room temperature.     

Solid‐contact Acetate‐selective Electrode Based on a 1,3‐bis(carbazolyl)urea‐ionophore

The construction and study of solid‐contact acetate‐selective electrodes is described using a 1,3‐bis(carbazolyl)urea derivative as a neutral hydrogen‐bonding ionophore and poly(3,4‐ethylenedioxythiophene) as the solid contact. It was shown recently that this ionophore binds acetate (logK_ass=4.98) that is used as primary ion in this study. The electrodes show linearity over the activity range of 10^?4.50–10^?1.10 with a sub‐Nernstian slope of ?51.3 mV per decade and a detection limit of 10^?5.00. The anion‐selectivity pattern of these electrodes deviates markedly from the Hofmeister pattern. When adding ionophore to the membrane the logarithm of the selectivity coefficient (logK) for SCN^? decreased from 6.5 to 1.2, logK for I^? decreased from 5.7 to 0.9, logK for NO₃^? decreased from 4.3 to 0.6 and logK for Br^? decreased from 3.3 to 0.1. The selectivity coefficients of hydrophilic anions such as Cl^?, F^?, HPO₄^2?, and SO₄^2? are significantly lower than in case of the ionophore‐free membrane. It was discovered that the constructed electrodes are also relatively selective to bicarbonate. This work is an important step towards the further development of solid‐contact anion‐selective electrodes.     

The Role of Ion Pairs in the Second‐Order NLO Response of 4‐X‐1‐Methylpiridinium Salts

A series of 4‐X‐1‐methylpyridinium cationic nonlinear optical (NLO) chromophores (X=(E)‐CH?CHC₆H₅; (E)‐CH?CHC₆H₄‐4′‐C(CH₃)₃; (E)‐CH?CHC₆H₄‐4′‐N(CH₃)₂; (E)‐CH?CHC₆H₄‐4′‐N(C₄H₉)₂; (E,E)‐(CH?CH)₂C₆H₄‐4′‐N(CH₃)₂) with various organic (CF₃SO₃^?, p‐CH₃C₆H₄SO₃^?), inorganic (I^?, ClO₄^?, SCN^?, [Hg₂I₆]^2?) and organometallic (cis‐[Ir(CO)₂I₂]^?) counter anions are studied with the aim of investigating the role of ion pairing and of ionic dissociation or aggregation of ion pairs in controlling their second‐order NLO response in anhydrous chloroform solution. The combined use of electronic absorption spectra, conductimetric measurements and pulsed field gradient spin echo (PGSE) NMR experiments show that the second‐order NLO response, investigated by the electric‐field‐induced second harmonic generation (EFISH) technique, of the salts of the cationic NLO chromophores strongly depends upon the nature of the counter anion and concentration. The ion pairs are the major species at concentration around 10^?3 M , and their dipole moments were determined. Generally, below 5×10^?4 M , ion pairs start to dissociate into ions with parallel increase of the second‐order NLO response, due to the increased concentration of purely cationic NLO chromophores with improved NLO response. At concentration higher than 10^?3 M , some multipolar aggregates, probably of H type, are formed, with parallel slight decrease of the second‐order NLO response. Ion pairing is dependent upon the nature of the counter anion and on the electronic structure of the cationic NLO chromophore. It is very strong for the thiocyanate anion in particular and, albeit to a lesser extent, for the sulfonated anions. The latter show increased tendency to self‐aggregate.     

Vibrational Spectroscopic Study on Ion Solvation and Ion Association of Lithium Tetrafluoroborate in 4‐Ethoxymethyl‐ethylene Carbonate

应用红外及拉曼光谱研究了不同浓度的四氟硼酸锂在4-乙氧甲基-碳酸乙烯酯溶剂中的离子溶剂化和离子缔合现象。环形变谱带和羰基伸缩振动谱带的分裂,以及骨架环振动谱带的迁移和分裂表明,锂离子与溶剂分子间存在着较强的相互作用,这种相互作用是通过溶剂羰基氧原子实现的。利用光谱拟合技术定量计算了表观溶剂化数。随着电解质锂盐浓度的增加,溶剂化数逐渐由4.32降至1.26。此外,四氟硼酸根v1谱带的分裂表明在高浓度溶液中存在着光谱自由的四氟硼酸根、直接接触离子对和离子对二聚体。     

Self‐Assembled Columnar Triazole Quartets: An Example of Synergistic Hydrogen‐Bonding/Anion–π Interactions

The self‐assembly of triazole amphiphiles was examined in solution, the solid state, and in bilayer membranes. Single‐crystal X‐ray diffraction experiments show that stacked protonated triazole quartets (T₄) are stabilized by multiple strong interactions with two anions. Hydrogen bonding/ion pairing of the anions are combined with anion–π recognition to produce columnar architectures. In bilayer membranes, low transport activity is observed when the T₄ channels are operated as H⁺/X^? translocators, but higher transport activity is observed for X^? in the presence of the K⁺‐carrier valinomycin. These self‐assembled superstructures, presenting intriguing structural behaviors such as directionality, and strong anion encapsulation by hydrogen bonding supported by vicinal anion–π interactions can serve as artificial supramolecular channels for transporting anions across lipid bilayer membranes.     

Gas‐Phase Affinity Scales for Typical Ionic Liquid Moieties Determined by using Cooks’ Kinetic Method

Gas‐phase affinity studies based on cations and anions commonly present in ionic liquid structures, give quantitative information about the magnitude of the interactions holding the two species together when ILs are formed. They also provide clues on how these interactions depend on the nature of the cationic and anionic moieties. In the present work, mass spectrometric experiments, performed using electrospray ionization quadrupole ion‐trap and Fourier transform ion cyclotron resonance mass spectrometry, were used to obtain two affinity scales by Cooks’ kinetic method: one scale for the various cations for the bis(trifluoromethylsulfonyl)imide anion, [NTf₂]^?, and another for the different anions for the 1‐butyl‐3‐methylimidazolium cation, [C₄mim]⁺. The obtained results are compared with previously reported data and discussed in terms of the structural characteristics of the different cationic and anionic species.     

Reaction‐Based Ratiometric Chemosensor for Instant Detection of Cyanide in Water with High Selectivity and Sensitivity

A highly selective chemosensor 1 based on an acylhydrazone group as binding site and naphthalene group as the fluorescence signal group were described, which could instantly detect CN^? in water with specific selectivity and high sensitivity. The detection of cyanide was performed via the nucleophilic attack of cyanide anion on the carbonyl group, which could be confirmed by ¹H NMR, ¹³C NMR, ESI‐MS and DFT calculations. The addition of CN^? to sensor 1 induced a remarkable color change from colorless to yellow and generated a blue fluorescence, these sense procedure could not interfered by other coexistent competitive anions (F^?, Cl^?, Br^?, I^?, AcO^?, H₂PO₄^?, HSO₄^?, ClO₄^?, SCN^?, S^2?, NO₃^? and SO₄^2?). The detection limits were 5.0×10^?7 M and 2.0×10^?9 M of CN^? using the visual fluorescent color changes and fluorescence spectra changes respectively, which is far lower than the WHO guideline of 1.9×10^?6 M . Test strips based on sensor 1 were fabricated, which could act as a convenient and efficient CN^? test kit to detect CN^? in pure water for “in‐the‐field” measurement.     

Raman Spectroscopic Study on Alkyl Chain Conformation in 1‐Butyl‐3‐methylimidazolium Ionic Liquids and their Aqueous Mixtures

Ionic liquids of 1‐butyl‐3‐methylimidazolium ([BMIM]) cation with different anions (Cl^?, Br^?, I^?, and BF₄^?), and their aqueous mixtures were investigated by using Raman spectroscopy and dispersion‐included density functional theory (DFT). The characteristic Raman bands at 600 and 624 cm^?1 for two isomers of the butyl chain in the imidazolium cation showed significant changes in intensity for different anions as well as in aqueous solutions. The area ratio of these two bands followed the order I^?>Br^?>Cl^?>BF₄^? (in terms of the anion X in [BMIM]X), indicating that the butyl chain of [BMIM]I tends to adopt the trans conformation. The butyl chain was found to adopt the gauche conformation upon dilution, irrespective of the anion type. The Raman bands in the butyl C?H stretch region for [BMIM]X (X=Cl^?, Br^?, and I^?) blueshifted significantly with the increase in the water concentration, whereas that for [BMIM]BF₄ changed very little upon dilution. The blueshift in the C?H stretch region upon dilution also followed the order: [BMIM]I>[BMIM]Br>[BMIM]Cl>[BMIM]BF₄, the same order as the above trans conformation preference of the butyl chain in pure imidazolium ionic liquids, which suggested that the cation‐anion interaction plays a role in determining the conformation of the chain.     

Bifunctional Ion‐Selective Electrode Based on C60‐Cryptand 22 for Silver and Iodine Ions

Fullerence C60‐cryptand 22 was prepared and successfully applied as the electric carrier in the PVC electrode membrane of a bifunctional ion‐selective electrode for cations, e.g., Ag⁺ ions as well as anions, e.g., I^? ions. The bifunctional ion‐selective electrode based on C60‐cryptand 22 can be applied as a Silver (Ag⁺) ion selective electrode with an internal electrode solution of 10^?3 M AgNO₃ in water (pH = 6.3), or as an Iodide (I^?) ion selective electrode with an acidic internal electrode solution of 10^?4 M KI_(aq) (pH = 2) in which the cryptand 22 is protonated, and the C60‐cryptand 22 is changed to C60‐Cryptand22–H⁺ and becomes an anionic electro‐carrier to absorb the I^? ion. The Ag⁺ ion selective electrode based on C60‐cryptand 22 gave a linear response with a near‐Nernstian slope (59.5 mV decade^?1) within the concentration range 10^?1‐10^?3 M Ag⁺_(aq). The Ag⁺ ion electrode exhibited comparatively good selectivity for silver ions, over other transition‐metal ions, alkali and alkaline earth metal ions. The Ag⁺ ion selective electrode with good stability and reproducibility was successfully used for the titration of Ag⁺_(aq) with Cl^? ions. The Iodide (I^?) Ion selective electrode based on protonated C60–cryptand22‐H⁺ also showed a linear response with a nearly Nernstian slope (58.5 mV decade^?1) within 10^?1 ‐ 10^?3 M I^? _(aq) and exhibited good selectivity for I^? ions and had small selectivity coefficients (10^?2–10^?3) for most of other anions, e.g., F^? , OH^?, CH₃COO^?, SO₄^2?, CO₃^2?, CrO₄^2?, Cr₂O₇^2? and PO₄^3? ions.     

Oligoether‐Strapped Calix[4]pyrrole: An Ion‐Pair Receptor Displaying Cation‐Dependent Chloride Anion Transport

A ditopic ion‐pair receptor ( 1 ), which has tunable cation‐ and anion‐binding sites, has been synthesized and characterized. Spectroscopic analyses provide support for the conclusion that receptor 1 binds fluoride and chloride anions strongly and forms stable 1:1 complexes ([ 1? F]^? and [ 1? Cl]^?) with appropriately chosen salts of these anions in acetonitrile. When the anion complexes of 1 were treated with alkali metal ions (Li⁺, Na⁺, K⁺, Cs⁺, as their perchlorate salts), ion‐dependent interactions were observed that were found to depend on both the choice of added cation and the initially complexed anion. In the case of [ 1? F]^?, no appreciable interaction with the K⁺ ion was seen. On the other hand, when this complex was treated with Li⁺ or Na⁺ ions, decomplexation of the bound fluoride anion was observed. In contrast to what was seen with Li⁺, Na⁺, K⁺, treating [ 1?F ]^? with Cs⁺ ions gave rise to a stable, host‐separated ion‐pair complex, [F ?1? Cs], which contains the Cs⁺ ion bound in the cup‐like portion of the calix[4]pyrrole. Different complexation behavior was seen in the case of the chloride complex, [ 1? Cl]^?. Here, no appreciable interaction was observed with Na⁺ or K⁺. In contrast, treating with Li⁺ produces a tight ion‐pair complex, [ 1? Li ? Cl], in which the cation is bound to the crown moiety. In analogy to what was seen for [ 1? F]^?, treatment of [ 1? Cl]^? with Cs⁺ ions gives rise to a host‐separated ion‐pair complex, [Cl ?1? Cs], in which the cation is bound to the cup of the calix[4]pyrrole. As inferred from liposomal model membrane transport studies, system 1 can act as an effective carrier for several chloride anion salts of Group 1 cations, operating through both symport (chloride+cation co‐transport) and antiport (nitrate‐for‐chloride exchange) mechanisms. This transport behavior stands in contrast to what is seen for simple octamethylcalix[4]pyrrole, which acts as an effective carrier for cesium chloride but does not operates through a nitrate‐for‐chloride anion exchange mechanism.     

Chaotropic‐Anion‐Induced Supramolecular Self‐Assembly of Ionic Polymeric Micelles

Traditional micelle self‐assembly is driven by the association of hydrophobic segments of amphiphilic molecules forming distinctive core–shell nanostructures in water. Here we report a surprising chaotropic‐anion‐induced micellization of cationic ammonium‐containing block copolymers. The resulting micelle nanoparticle consists of a large number of ion pairs (≈60 000) in each hydrophobic core. Unlike chaotropic anions (e.g. ClO₄^?), kosmotropic anions (e.g. SO₄^2?) were not able to induce micelle formation. A positive cooperativity was observed during micellization, for which only a three‐fold increase in ClO₄^? concentration was necessary for micelle formation, similar to our previously reported ultra‐pH‐responsive behavior. This unique ion‐pair‐containing micelle provides a useful model system to study the complex interplay of noncovalent interactions (e.g. electrostatic, van der Waals, and hydrophobic forces) during micelle self‐assembly.     

A Series of Amino Acid Functionalized Tripodal Hexaamide Anion Receptors: Ion‐Pair‐Assisted Capped‐Cleft Formation by a Pentafluorophenyl‐Functionalized Amide

A new series of tris(2‐aminoethyl)amine (tren)‐based L ‐alanine amino acid backboned tripodal hexaamide receptors (L1–L5) with various attached moieties based on electron‐withdrawing fluoro groups and lipophilicity have been synthesized and characterized. Detailed binding studies of L1–L5 with different anions, such as halides (F^?, Cl^?, Br^?, and I^?) and oxyanions (AcO^?, BzO^? (Bz=benzoyl), NO₃^?, H₂PO₄^?, and HSO₄^?), have been carried out by isothermal titration calorimetric (ITC) experiments in acetonitrile/dimethylsulfoxide (99.5:0.5 v/v) at 298 K. ITC titration experiments have clearly shown that receptors L1–L4 invariably form 1:1 complexes with Cl^?, AcO^?, BzO^?, and HSO₄^?, whereas L5 forms a 1:1 complex only with AcO^?. In the case of Br^?, I^?, and NO₃^?, no appreciable heat change is observed owing to weak interactions between these anions and receptors; this is further confirmed by ¹H NMR spectroscopy. The ITC binding studies of F^? and H₂PO₄^? do not fit well for a 1:1 binding model. Furthermore, ITC binding studies also revealed slightly higher selectivity of this series of receptors towards AcO^? over Cl^?, BzO^?, and HSO₄^?. Solid‐state structural evidence for the recognition of Cl^? by this new category of receptor was confirmed by single‐crystal X‐ray structural analysis of the complex of tetrabutylammonium chloride (TBACl) and L1. Single‐crystal X‐ray diffraction clearly showed that the pentafluorophenyl‐functionalized amide receptor (L1) encapsulated Cl^? in its cavity by hydrogen bonds from amides, and the cavity of L1 was capped with a TBA cation through hydrogen bonding and ion‐pair interactions to form a capped‐cleft orientation. To understand the role of the cationic counterpart in solution‐state Cl^? binding processes with this series of receptors (L1–L4), a detailed Cl^? binding study was carried out with three different tetraalkylammonium (Me₄N⁺, Et₄N⁺, and Bu₄N⁺) salts of Cl^?. The binding affinities of these receptors with different tetralkylammonium salts of Cl^? gave binding constants with the TBA cation in the following order: butyl>ethyl>methyl. This study further supports the role of the TBA countercation in ion‐pair recognition by this series of receptors.     

Ion Transport Across Liquid|Liquid Interfacial Boundaries Monitored at Generator‐Collector Electrodes

Anion transfer processes at a liquid|liquid interface were studied with an interdigitated gold band array electrode. The organic phase, 4‐(3‐phenylpropyl)‐pyridine containing Co(II)phthalocyanine, was immobilised as random droplets at the electrode surface and then immersed into aqueous electrolyte. Oxidation of Co(II)phthalocyanine at the generator electrode was shown to be associated with anion transfer from the aqueous into the organic phase. The corresponding back reduction at the collector electrode with anion expulsion was delayed by the anion/cation diffusion time across the interelectrode gap. A working curve based on a finite difference numerical simulation model was employed to estimate the apparent diffusion coefficients for anions in the organic phase (PF₆^?4^?3^?). Potential applications in ion analysis are discussed.