Construction of Bovine Serum Albumin/AIE‐Based Quaternary Complexes for Efficient Gene Transfection

High transfection efficiency and superior cell imaging are required for cationic polymers‐based gene delivery system to afford high therapeutic effect but its high toxicity and unstable cell imaging are easily ignored. In this study, cationic amino poly(glycerol methacrylate) derivative (PGMA‐EDA) is used to incorporate bovine serum albumin (BSA) and aggregation‐induced emission (AIE) molecular (tetraphenylethylene derivatives, TPE) as an efficient carrier for gene transfection and intracellular imaging. The obtained polymer/pDNA‐TPE/BSA (PDTB) quaternary nanoparticles (NPs) not only exhibit efficient gene transfection but also show excellent biocompatibility. After inclusion of TPE/BSA (TB) NPs, BSA promoted dissociation of the complexes upon being protonated and the lipophilic TPE‐reduced endosomal membrane stability, which enhanced endosomal escape of pDNA payload, finally resulting in an excellent gene transfection. On the other hand, less positive surface charge of PDTB NPs than that of the binary PD complexes, as well as the addition of biocompatible BSA, both factors contribute to the improved cell viability. Moreover, the AIE feature of TPE compared to aggregation‐caused quenching character of conventional fluorophores enables the complex with stably tracking the delivery of pDNA into cancer cells. Therefore, the newly developed PDTB complexes may be a promising candidate vector for traceable, safe, and effective gene delivery.     

MC8 Peptide-Mediated Her-2 Receptor Targeting Based on PEI-β-CyD as Gene Delivery Vector

A novel vector with high gene delivery efficiency and special cell targeting ability was developed using a good strategy that utilized low molecular weight polyethylenimine (PEI; molecular weight, 600 KDa [PEI600]) cross-linked to β-cyclodextrin (β-CyD) via a facile synthetic route. Human epidermal growth factor receptor 2 (Her-2) are highly expressed in a variety of human cancer cells and are potential targets for cancer therapy. MC8 peptides, which have been proven to combine especially with Her-2 on cell membranes were coupled to PEI-β-CyD using N-succinimidyl-3-(2-pyridyldithio) propionate as a linker. The ratios of PEI600, β-CyD, and peptide were calculated based on proton integral values obtained from the ¹H-NMR spectra of the resulting products. Electron microscope observations showed that MC8-PEI-β-CyD can efficiently condense plasmid DNA (pDNA) into nanoparticles of about 200 nm, and MTT assays suggested the decreased toxicity of the polymer. Experiments on gene delivery efficiency in vitro showed that MC8-PEI-β-CyD/pDNA polyplexes had significantly greater transgene activities than PEI-β-CyD/pDNA in the Skov3 and A549 cells, which positively expressed Her-2, whereas, no such effect was observed in the MCF-7 cells, which negatively expressed Her-2. Our current research indicated that the synthesized nonviral vector shows improved gene delivery efficiency and targeting specificity in Her-2 positive cells.     

MicroRNA Delivery with Bioreducible Polyethylenimine as a Non‐Viral Vector for Breast Cancer Gene Therapy

Polyethylenimines (PEIs) are outstanding macromolecules belonging to the polycations used in gene transfection. The transfection efficiency and cytotoxicity of PEIs increase with the increase in their molecular weight. To break up the correlation between transfection efficiency and cytotoxicity for non‐viral gene delivery, disulfide cross‐linked polyethylenimine (PEI‐SS) has been widely employed as highly efficient gene vectors for DNA/siRNA delivery in numerous efforts. In this work, PEI‐SS is described as a non‐viral vector for miRNA delivery for the first time. PEI‐SS is synthesized via cross‐linking using disulfide bonds as the cross‐linker from low molecular weight PEI. PEI‐SS can efficiently bind anti‐miR‐155 to form the polyplex with nano‐sized spherical structures in the size range of 10–100 nm. The polyplex is degraded by glutathione (GSH, a reducing agent) in cancer cells. Anti‐miR‐155 is then released to efficiently inhibit tumor growth.     

Polymeric Nanoparticles Induce NLRP3 Inflammasome Activation and Promote Breast Cancer Metastasis

Polymeric nanoparticles gain enormous interests in cancer therapy. Polyethylenimine (PEI) 25 kD is well known for its high transfection efficiency and cytotoxicity. PEI‐CyD (PC) was previously synthesized by conjugating low molecular PEI (M _w 600) with β‐cyclodextrin (β‐CyD), which is shown to induce lower cytotoxicity than PEI 25 kD. In the current study, the in vivo immune response of branched PEI 25 kD and PC is investigated. Compared to PC/pDNA, exposure of PEI 25kD/pDNA induces higher level of immune‐stimulation evidenced by the increased spleen weight, phagocytic capacity of peritoneal macrophage, and proinflammatory cytokines in serum and liver. Importantly, administration of PEI 25 kD can greatly promote breast cancer metastasis in liver and lung tissues, which correlates with its ability to induce high oxidative stress and NLRP3‐inflammasome activation. These results suggest that polymeric nanocarriers have the potential to induce immune‐stimulation and cancer metastasis, which may affect their efficiency for cancer therapy.     

普鲁兰多糖为骨架的新型阳离子非病毒基因载体

通过琥珀酸酐将低分子量支化聚乙烯亚胺(PEI, 分子量1000)偶联到普鲁兰多糖(Pullulan)上, 合成了新型基因载体P-PEI. 利用 ¹H NMR、 FTIR、 粒度仪、 Zeta电位仪、 透射电镜和凝胶电泳对聚阳离子载体及其与质粒pDNA 的复合物进行了表征. 凝胶阻滞实验结果证明, 载体P-PEI在体外可以通过静电相互作用稳定结合pDNA, 并能有效抑制DNA水解酶及血清成分对pDNA的降解. 噻唑蓝(MTT)细胞毒性测试、 绿色荧光蛋白表达质粒(pGFP)及荧光素酶表达质粒(pGL3)转染实验结果表明, 载体P-PEI在N/P高达12.5时对细胞MCF-7, HeLa和COS-7的毒性低于PEI; 当N/P 为6.25时能有效将pGFP和pGL3带入Hela 细胞并表达, 最佳转染效率及荧光素酶活分别为, 比Lipo 2000[(49.13±0.61)%, (58.47±7.62)×10⁸ RLU/mg蛋白) 略低. 因此以Pullulan为骨架材料的P-PEI是一种新的有潜在应用价值的非病毒基因载体.     

Poly(ethyleneimine) microcapsules: glutaraldehyde‐mediated assembly and the influence of molecular weight on their properties

Poly(ethyleneimine) (PEI) microcapsules were prepared via the method of glutaraldehyde (GA)‐mediated covalent layer‐by‐layer (LbL) assembly, which utilized GA to cross‐link the adsorbed PEI layer and to introduce free aldehyde group on the surface for the next PEI adsorption on MnCO₃ microparticles, followed by core removal. Evidenced by ellipsometry, the PEI multilayers grew nearly linearly along with the layer number and their thickness was controlled at the nanometer scale. The hollow structure, morphology, and wall thickness were characterized by scanning electron microscopy (SEM), scanning force microscopy (SFM), and confocal laser scanning microscopy (CLSM), revealing that the capsule structure as well as the cut‐off molecular weight of the capsule wall could be tuned by the molecular weight of PEI. This offers a general and novel pathway to fabricate single component capsules with pre‐designed structure (size, shape, and wall thickness) and properties. Copyright © 2007 John Wiley & Sons, Ltd.     

Polycationic Amphiphilic Cyclodextrins for Gene Delivery: Synthesis and Effect of Structural Modifications on Plasmid DNA Complex Stability,Cytotoxicity, and Gene Expression

A molecular‐diversity‐oriented approach for the preparation of well‐defined polycationic amphiphilic cyclodextrins (paCDs) as gene‐delivery systems is reported. The synthetic strategy takes advantage of the differential reactivity of primary versus secondary hydroxyl groups on the CD torus to regioselectively decorate each rim with cationic elements and lipophilic tails, respectively. Both the charge density and the hydrophobic–hydrophilic balance can be finely tuned in a highly symmetrical architecture that is reminiscent of both cationic lipids and cationic polymers, the two most prominent types of nonviral gene vectors. The monodisperse nature of paCDs and the modularity of the synthetic scheme are particularly well suited for structure–activity relationship studies. Gel electrophoresis revealed that paCDs self‐assemble in the presence of plasmid DNA (pDNA) to provide homogeneous, stable nanoparticles (CDplexes) of 70–150 nm that fully protect pDNA from the environment. The transfection efficiency of the resulting CDplexes has been investigated in vitro on BNL‐CL2 and COS‐7 cell lines in the absence and presence of serum and found to be intimately dependent on architectural features. Facial amphiphilicity and the presence of a cluster of cationic and hydrogen‐bonding centers for cooperative and reversible complexation of the polyanionic DNA chain is crucial to attain high transgene expression levels with very low toxicity profiles. Further enhancement of gene expression, eventually overcoming that of polyplexes from commercial polyethyleneimine (PEI) polymers (22 kDa), is achieved by building up space‐oriented dendritic polycationic constructs.     

Influence of Alkyl Chains of Modified Polysuccinimide‐Based Polycationic Polymers on Polyplex Formation and Transfection

The development of polymers with low toxicity and efficient gene delivery remains a significant barrier of nonviral gene therapy. Modification and tuning of chemical structures of carriers is an attractive strategy for efficient nucleic acid delivery. Here, polyplexes consisting of plasmid DNA (pDNA) and dodecylated or non‐dodecylated polysuccinimide (PSI)‐based polycations are designed, and their transfection ability into HeLa cells is investigated by green fluorescent protein (GFP) expressing cells quantification. All cationic polymers show lower cytotoxicity than those of branched polyethyleneimine (bPEI). PSI and bPEI‐based polyplexes have comparable physicochemical properties such as size and charge. Interestingly, a strong interaction between dodecylated polycations and pDNA caused by the hydrophobic moiety is observed in dodecylated PSI derivatives. Moreover, the decrease of GFP expression is associated with lower dissociation of pDNA from polyplexes according to the heparin displacement assay. Besides, a hydrophobization of PSI cationic derivatives with dodecyl side chains can modulate the integrity of polyplexes by hydrophobic interactions, increasing the binding between the polymer and the DNA. These results provide useful information for designing polyplexes with lower toxicity and greater stability and transfection performance.     

Photodynamic Therapy of Oligoethylene Glycol‐Dendronized Reduction‐Sensitive Porphyrins

Graphene oxide (GO ) and its functionalized derivatives have attracted increasing attention in medical treatment. Herein, a reduction sensitive PEI‐GO ‐SS ‐TPP was synthesized for photodynamic therapy. More than 80% porphyrin release was observed in the presence of 10 mmol•L⁻¹ DTT in one day. The confocal laser scanning microscopy confirmed that the cell uptake efficiency of PEI‐GO‐SS‐TPP was remarkably enhanced as compared to free porphyrin which was significantly dependent on incubation time. For photodynamic therapy, GSH‐OEt could effectively increase the photodynamic therapy efficiency of PEI‐GO ‐SS ‐TPP . Compared with free porphyrin, the toxicity from PEI‐GO ‐SS ‐TPP is much higher with a low IC₅₀ (2.1 µg/mL ) value. All results indicate that the PEI‐GO ‐SS ‐TPP PSs are promising for photodynamic therapy.     

Polyethyleneimine‐Coated Gold Nanoparticles: Straightforward Preparation of Efficient DNA Delivery Nanocarriers

A novel one‐pot method for the synthesis of polyethyleneimine (PEI)‐coated gold nanoparticles (AuPEI‐NPs) that combines the reductant–stabilizer properties of PEI with microwave irradiation starting from hydrogen tetrachloroaurate acid (HAuCl₄) and branched PEI 25 kDa (b25kPEI) was explored. The method was straightforward, green, and low costing, for which the Au/PEI ratio (1:1 to 1:128 w/w) was a key parameter to modulate their capabilities as DNA delivery nanocarriers. Transfection assays in CHO‐k1 cells demonstrated that AuPEI‐NPs with 1:16 and 1:32 w/w ratios behaved as effective DNA gene vectors with improved transfection efficiencies (twofold) and significantly lower toxicity than unmodified b25kPEI and Lipofectamine 2000. The transfection mediated by these AuPEI‐NP–DNA polyplexes preferentially used the caveolae‐mediated route for intracellular internalization, as shown by studies performed by using specific internalization inhibitors as well as colocalization with markers of clathrin‐ and caveolae‐dependent pathways. The AuPEI‐NP polyplexes preferentially used the more efficient caveolae internalization pathway to promote transfection, a fact that supports their higher transfection efficiency relative to that of Lipofectamine 2000. In addition, intracellular trafficking of the AuPEI‐NPs was studied by transmission electron microscopy.     

CAGW and TAT‐NLS peptides functionalized multitargeting gene delivery system with high transfection efficiency

Gene therapy has attracted much attention in vascular tissue engineering. However, it is still challenging to develop a novel gene carrier with multifunction to overcome the barriers in gene delivery. Herein, the multitargeting gene complexes were developed based on methoxy‐poly(ethylene glycol)‐b‐poly‐(D,L‐lactide‐co‐glycolide) (mPEG‐b‐PLGA), poly(d ,l ‐lactide‐co‐glycolide)‐g‐polyethylenimine‐g‐CAGW (PLGA‐g‐PEI‐g‐CAGW), cell‐penetrating peptide YGRKKRRQRRR (TAT), nuclear localization signals (NLS), and pEGFP‐ZNF580 (pDNA) with the purpose of enhancing the transfection of endothelial cells (ECs). The low cytotoxic multitargeting gene complexes could be easily prepared by adjusting the weight ratio of mPEG‐b‐PLGA and PLGA‐g‐PEI‐g‐CAGW. Meanwhile, CAGW peptide with selectively ECs‐targeting ability and TAT‐NLS peptide sequence with both cell‐penetrating ability and nuclear targeting capacity were simultaneously introduced into gene complexes in order to enable them with the multitargeting function so as to improve their gene delivery capacity. The pDNA loading capacity of these gene complexes was confirmed by agarose gel electrophoresis assay. MTT results demonstrated that the relatively cell viability of the multitargeting gene complexes was higher than those of other groups. These multitargeting gene complexes showed higher internalization and transfection efficiencies than other groups. These results revealed that CAGW and TAT‐NLS peptide sequences benefited for efficient gene delivery. Furthermore, the wound healing assay demonstrated that the multitargeting gene complexes could promote the proliferation and migration of ECs. These results collectively demonstrated that CAGW and TAT‐NLS peptides functionalized gene delivery system could effectively enhance the transfection of ECs, which has great potential in vascular tissue engineering.     

Efficient Self‐Assembled DNA Nanoparticles through Rolling Circle Amplification for siRNA Delivery in vitro

Effective and low toxicity delivery of siRNA is of great importance for clinical gene therapy. Herein, self‐assembled DNA nanoparticles (NPs) based on rolling circle amplification (RCA) with a small interfering RNA (siRNA) payload were successfully developed as a facile and efficient siRNA delivery strategy. This intracellular gene silencing strategy exhibits various advantages including low toxicity, high efficiency, and good stability. The synthesized DNA NPs serve as siRNA carriers, protecting the siRNA against nuclease degradation. We demonstrate that the obtained self‐assembled siRNA/NP/PEI system can successfully deliver enhanced green fluorescent protein (EGFP)‐siRNA into HeLa cells, realizing the same EGFP knockdown efficiency with less toxicity as that of commercial Lipofectamine 2000.     

Polycationic beta-cyclodextrin "click clusters": monodisperse and versatile scaffolds for nucleic acid delivery

Herein, a novel series of multivalent polycationic beta-cyclodextrin "click clusters" with discrete molecular weight have been synthesized, characterized, and examined as therapeutic pDNA carriers. The materials were creatively designed based on a beta-cyclodextrin core to impart a biocompatible multivalent architecture and oligoethyleneamine arms to facilitate pDNA binding, encapsulation, and cellular uptake. An acetylated-per-azido-beta-cyclodextrin (4) was reacted with series of alkyne dendrons (7a-e) (containing one to five ethyleneamine units) using copper-catalyzed 1,3-dipolar cycloaddition, to form a series of click clusters (9a-e) bearing 1,2,3-triazole linkers. Gel electrophoresis experiments, dynamic light scattering, and transmission electron microscopy revealed that the macromolecules bind and compact pDNA into spherical nanoparticles in the size range of 80-130 nm. The polycations protect pDNA against nuclease degradation, where structures 9c, 9d, and 9e did not allow pDNA degradation in the presence of serum for up to 48 h. The cellular uptake profiles were evaluated in Opti-MEM and demonstrate that all the click clusters efficiently deliver Cy5-labeled pDNA into HeLa and H9c2 (2-1) cells, and compounds 9d and 9e yielded efficacy similar to that of the positive controls, Jet-PEI and Superfect. Furthermore, the luciferase gene delivery experiments revealed that the level of reporter gene expression increased with an increase in oligoethyleneamine number within the cluster arms. The cytotoxicity profiles of these materials were evaluated by protein, MTT, and LDH assays, which demonstrate that all the click clusters remain nontoxic within the expected dosage range while the positive controls, Jet PEI and Superfect, were highly cytotoxic. In particular, 9d and 9e were the most effective and promising polycationic vehicles to be further optimized for future systemic delivery experiments.     

A novel solventless coating method to graft low‐molecular weight polyethyleneimine on silica fine powders

The overall objective of the present study was to modulate the surface characteristics of aerogel‐like submicron and nanometric particles by coating them with polyethyleneimine (PEI) to suit specific biological applications. A new process for the covalent grafting of low‐molecular weight PEI chains has been described, based on the use of compressed CO₂ as the initiator of the ring opening polymerization of the ethyleneimine monomer, which was performed in the presence of silica particles. Coating was done at low pressure and temperature and in the absence of any organic solvent. Obtained materials were compared with a product prepared following the standard soaking procedure for PEI coating. Materials were characterized regarding composition, structure, surface charge, particle size, morphology, and drug release. The developed process led to the covalent grafting of low‐molecular weight PEI on the silica surface, which conferred an increased thermal stability for the coating and low cytotoxicity to the particles. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2760–2768     

Polycation Structure Mediates Expression of Lyophilized Polycation/pDNA Complexes

Lyophilization of polycation/pDNA complexes provides stable, long‐term storage of complexes prior to clinical use but also reduces gene delivery efficiency. We examined whether polycation structure mediates effects of lyophilization on gene expression. Linear and branched PEI of the same molecular weight were used as a model system. Interestingly, pDNA/linear PEI complexes led to much smaller effects on gene expression following lyophilization compared with branched PEI complexes. The effect of polycation structure correlated with changes in dissociation ability of pDNA/PEI complexes. These results will be useful for developing new gene delivery vehicles.

     

Combined Delivery of a Lipopolysaccharide‐Binding Peptide and the Heme Oxygenase‐1 Gene Using Deoxycholic Acid‐Conjugated Polyethylenimine for the Treatment of Acute Lung Injury

A ternary complex comprising plasmid DNA, lipopolysaccharide‐binding peptide (LBP), and deoxycholic acid‐conjugated polyethylenimine (PEI‐DA) is prepared for combinational therapy of acute lung injury (ALI). The LBP is designed as an anti‐inflammatory peptide based on the lipopolysaccharide (LPS)‐binding domain of HMGB‐1. In vitro cytokine assays show that LBP reduces levels of proinflammatory cytokines by inhibiting LPS. PEI‐DA is synthesized as the gene carrier by conjugation of deoxycholic acid to low‐molecular weight polyethylenimine (2 kDa, PEI2k). PEI‐DA has higher transfection efficiency than high‐molecular weight polyethylenimine (25 kDa, PEI25k). The ternary complex of an HO‐1 plasmid (pHO‐1), PEI‐DA, and LBP is prepared as a combinational system to deliver the therapeutic gene and peptide. The transfection efficiency of the ternary complex is higher than that of the pHO‐1/PEI‐DA binary complex. The ternary complex also reduces TNF‐α secretion in LPS‐activated Raw264.7 macrophage cells. Administration of the ternary complex into the lungs of an animal ALI model by intratracheal injection induces HO‐1 expression and reduces levels of proinflammatory cytokines more efficiently than the pHO‐1/PEI‐DA binary complex or LBP alone. In addition, the ternary complex reduces inflammation in the lungs. Therefore, the pHO‐1/PEI‐DA/LBP ternary complex may be an effective treatment for ALI.

     

Protein Delivery System Containing a Nickel‐Immobilized Polymer for Multimerization of Affinity‐Purified His‐Tagged Proteins Enhances Cytosolic Transfer

Recombinant proteins with cytosolic or nuclear activities are emerging as tools for interfering with cellular functions. Because such tools rely on vehicles for crossing the plasma membrane we developed a protein delivery system consisting in the assembly of pyridylthiourea‐grafted polyethylenimine (πPEI) with affinity‐purified His‐tagged proteins pre‐organized onto a nickel‐immobilized polymeric guide. The guide was prepared by functionalization of an ornithine polymer with nitrilotriacetic acid groups and shown to bind several His‐tagged proteins. Superstructures were visualized by electron and atomic force microscopy using 2 nm His‐tagged gold nanoparticles as probes. The whole system efficiently carried the green fluorescent protein, single‐chain antibodies or caspase 3, into the cytosol of living cells. Transduction of the protease caspase 3 induced apoptosis in two cancer cell lines, demonstrating that this new protein delivery method could be used to interfere with cellular functions.     

Interfacial living radical copolymerization of oil‐ and water‐soluble comonomers to form composite polymer capsules

The suspension copolymerization of methyl methacrylate with hydroxy‐functional poly(ethylene glycol) monomethacrylate (PEGMA) by atom transfer radical polymerization (ATRP) yielded soluble, controlled‐molecular‐weight amphiphilic copolymers (weight‐average molecular weight/number‐average molecular weight <1.3). Despite extensive partitioning of PEGMA into the water phase, copolymers containing up to 24 mol % PEGMA were formed in the oil phase, from comonomer feeds containing 30 mol % PEGMA. Conversions by suspension polymerization were comparable to those obtained by solution polymerization, at over 70%. Suspension copolymers with high PEGMA contents contained high‐molecular‐weight polymer formed by uncontrolled polymerization, unless poly(vinyl pyrrolidone) was added to displace the growing polymer from the interface. The addition of diethylene glycol dimethacrylate gave capsules at 17 mol % PEGMA with ATRP, whereas conventional free‐radical polymerization required 24 mol % PEGMA to form capsules. The lower PEGMA level required for capsule formation with ATRP was attributed to the lower rates of propagation and crosslinking and to improved incorporation of PEGMA into the final gels. Suspension ATRP with 24 mol % PEGMA in the feed gave two‐layer capsule walls consisting of an inner layer visible by transmission electron microscopy and an outer layer visible by both transmission electron microscopy and environmental scanning electron microscopy, which indicated a compositional gradient across the capsule wall. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 156–171, 2006     

Biocompatible and pH‐responsive triblock copolymer mPEG‐b‐PCL‐b‐PDMAEMA: Synthesis,self‐assembly,and application

A series of well‐defined amphiphilic triblock copolymers [polyethylene glycol monomethyl ether]‐block‐poly(ε‐caprolactone)‐block‐poly[2‐(dimethylamino)ethyl methacrylate] (mPEG‐b‐PCL‐b‐PDMAEMA or abbreviated as mPEG‐b‐PCL‐b‐PDMA) were prepared by a combination of ring‐opening polymerization and atom transfer radical polymerization. The chemical structures and compositions of these copolymers have been characterized by Fourier transform infrared spectroscopy, ¹H NMR, and thermogravimetric analysis. The molecular weights of the triblock copolymers were obtained by calculating from ¹H NMR spectra and gel permeation chromatography measurements. Subsequently, the self‐assembly behavior of these copolymers was investigated by fluorescence probe method and transmission electron microscopy, which indicated that these amphiphilic triblock copolymers possess distinct pH‐dependent critical aggregation concentrations and can self‐assemble into micelles or vesicles in PBS buffer solution, depending on the length of PDMA in the copolymer. Agarose gel retardation assays demonstrated that these cationic nanoparticles can effectively condense plasmid DNA. Cell toxicity tests indicated that these triblock copolymers displayed lower cytotoxicity than that of branched polyethylenimine with molecular weight of 25 kDa. In addition, in vitro release of Naproxen from these nanoparticles in pH buffer solutions was conducted, demonstrating that higher PCL content would result in the higher drug loading content and lower release rate. These biodegradable and biocompatible cationic copolymers have potential applications in drug and gene delivery. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1079–1091, 2010     

通过甲基丙烯酰胺侧基迈克尔加成制备阳离子聚碳酸酯

针对高分子量的聚乙烯亚胺(PEI)作为基因载体效率高但毒性大,而低分子量的聚乙烯亚胺虽毒性低但对基因的结合能力差、转染效率低的矛盾,设计合成了主链可生物降解而侧链带有胺类化合物的阳离子聚碳酸酯.首先,2-氨基-1,3-丙二醇和甲基丙烯酰氯反应制得2-(甲基丙烯酰胺基)-1,3-丙二醇,再用氯甲酸乙酯在室温下用三乙胺作碱...