BODIPY based fluorescent turn-on sensor for highly selective detection of HNO and the application in living cells

On the basis of BODIPY platform, a terpyridyl-substituent BODIPY-Copper complex (Cu(II)-BTPY) was rationally designed and synthesized as a redox reaction fluorescent sensor for detecting HNO over reactive oxygen species (ROS) and reactive nitrogen species (RNS) with impressive selectivity in living cells under mild and neutral conditions. The BTPY exhibits relatively high fluorescence quantum efficiency as much as 34.8% and presents large stokes shift, about 62 nm. When a series of transition metal ions were exploited to investigate the fluorescence quench towards BTPY, copper ion (Cu²⁺) gave the optimal result. After the fluorescence of the probe being effectively quenched in the presence of Cu²⁺, it can be in turn recovered through the reduction of Cu²⁺ into Cu⁺ by HNO accompanying with a visually observable fluorescence response. Still, the sensing mechanism was evidently confirmed by EPR and ESI-MS measurement. In addition, the employment of BTPY for imaging dyes was also presented in vivo.     

Piezoelectric Crystal Liquid Flow Detection Systems Based on Alkyl (C18)‐Benzo‐15‐Crown 5 for Organic Compounds and Metal Ions

A water in soluble long‐chain crown ether alkyl (C18)‐benzo‐15‐crown‐5 was synthesized and applied as a coating material on quartz crystal membranes of a liquid flow piezo electric crystal sensor. The oscillating crown ether‐coated piezo electric (PZ) crystal with a home‐made computer inter face was prepared as a liquid chromato graphic (LC) detector for organic species and metal ions in aqueous solutions. The oscillating frequency of the quartz crystal decreased due to the adsorption of organic molecules or metal ions on crown ether molecules. Effects of functional group, molar mass, steric hindrance, and polarity of organic molecules on frequency responses of the crown ether coated PZ crystal detector were investigated. The frequency responses of the crown ether coated PZ crystal detector for various molecules were in the order: amines > carboxylic acids > alcohols > ketones. The crown ether PZ detector also exhibited good sensitivity for some heavy metal ions and the frequency shifts were in the order: Cr³⁺ » Pb²⁺ > Co²⁺ > Cd²⁺ > Ni²⁺ > Cu²⁺. The crown ether coated piezo electric crystal LC detector demonstrated low detection limits for various polar organic molecules, e.g., 6.0 × 10^?5 M for propylamine, and metal ions, e.g., 2.9 × 10^?5 M (1.8 ppm) for Cu²⁺; the crown ether PZ detector also gave good reproducibility when re used. A quite sensitive electrochemical quartz crystal microbalance (EQCM) detection system was also set‐up for detecting trace heavy metal ions in solutions. The variation in frequency of the PZ crystal and the diffusion current were observed simultaneously after the reduction in heavy metal ions such as Cu²⁺ and Ni²⁺. The EQCM detection system exhibited fairly good sensitivity, e.g., 112 Hz/ppm for Cu²⁺ and a good detection limit, e.g., 0.13 ppm for Cu²⁺ ions. Comparison between EQCM and PZ detection systems was made and discussed.     

Molecular Logic Gates and Switches Based on 1,3,4‐Oxadiazoles Triggered by Metal Ions

Organic molecular devices for information processing applications are highly useful building blocks for constructing molecular‐level machines. The development of “intelligent” molecules capable of performing logic operations would enable molecular‐level devices and machines to be created. We designed a series of 2,5‐diaryl‐1,3,4‐oxadiazoles bearing a 2‐(para‐substituted)phenyl and a 5‐(o‐pyridyl) group (substituent X=NMe₂, OEt, Me, H, and Cl; 1 a – e ) that form a bidentate chelating environment for metal ions. These compounds showed fluorescence response profiles varying in both emission intensity and wavelength toward the tested metal ions Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺ and the responses were dependent on the substituent X, with those of 1 d being the most substantial. The 1,3,4‐oxadiazole O or N atom and pyridine N atom were identified as metal‐chelating sites. The fluorescence responses of 1 d upon metal chelation were employed for developing truth tables for OR, NOR, INHIBIT, and EnNOR logic gates as well as “ON‐OFF‐ON” and “OFF‐ON‐OFF” fluorescent switches in a single 1,3,4‐oxadiazole molecular system.     

Iron(III)‐Selective Chelation‐Enhanced Fluorescence Sensing for In Vivo Imaging Applications

A “turn‐on” pattern Fe³⁺‐selective fluorescent sensor was synthesized and characterized that showed high fluorescence discrimination of Fe³⁺ over Fe²⁺ and other tested ions. With a 62‐fold fluorescence enhancement towards Fe³⁺, the probe was employed to detect Fe³⁺ in vivo in HeLa cells and Caenorhabditis elegans, and it was also successfully used to elucidate Fe³⁺ enrichment and exchange infected by innexin3 (Inx3) in hemichannel‐closed Sf9 cells.     

Highly Photoluminescent Amino‐Functionalized Graphene Quantum Dots Used for Sensing Copper Ions

Herein, we report a new kind of highly fluorescent probe for Cu²⁺ sensing generated by hydrothermal treatment of graphene quantum dots (GQDs). After hydrothermal treatment in ammonia, the greenish‐yellow fluorescent GQDs (gGQDs) with a low quantum yield (QY, 2.5 %) are converted to amino‐functionalized GQDs (afGQDs) with a high QY (16.4 %). Due to the fact that Cu²⁺ ions have a higher binding affinity and faster chelating kinetics with N and O on the surface of afGQDs than other transition‐metal ions, the selectivity of afGQDs for Cu²⁺ is much higher than that of gGQDs. Furthermore, afGQDs are biocompatible and eco‐friendly, and the afGQDs with a positive charge can be easily taken up by cells, which makes it possible to sense Cu²⁺ in living cells. The strategy presented here is simple in design, economical, and offers a “mix‐and‐detect” protocol without dye‐modified oligonucleotides or complex chemical modification.     

New imidazole‐functionalized polyfluorene derivatives: convenient postfunctional syntheses,sensitive probes for metal ions and cyanide,and adjustable output signals with diversified fluorescence color

Based on our previous work on the sensitive and selective conjugated fluorescent polymeric sensors toward cyanide, 2,1,3‐benzothiadiazole and 4,7‐bis(thiophen‐2‐yl)‐2,1,3‐benzothiadiazole were incorporated into the polyfluorene backbone to yield three new polymers bearing imidazole moieties in the side chains, with different fluorescence color. The fluorescence could be turned off by Cu²⁺ ions and then recovered on addition of cyanide, making them good cyanide sensors with the detection limit down to 1.9 μM. Moreover, by fully understanding this “turn off–turn on” strategy and using the cooperation of two polymers with different fluorescence color, the emission color of the mixture system of one of the imidazole‐containing polymers and one from the corresponding polymers without imidazole ones, could be adjusted by the concentrations of the added copper and cyanide ions, leading to the output fluorescent signals diversity. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Carbazole‐based colorimetric and fluorescent probe for Cu2+ and its utility in bio‐imaging and real water samples

A new carbazole functionalized Schiff base CBM was synthesized and characterized. CBM can selectively recognize Cu²⁺ via UV–vis and fluorescence signal among common biologically relevant metal ions. When Cu²⁺ was added to CBM, there was a significant enhancement at the maximum absorption wavelength of 393 nm and with a distinct blue shift. The maximum emission peak was significantly attenuated by a factor of about 15 times at 535 nm and the blue shift of emission wavelength was observed. When other metal ions were added, there was no remarkable change at the maximum absorption and emission peak. Under the illumination of 365 nm ultraviolet lamp, the color of the CBM solution changed from light blue to dark blue after the addition of Cu²⁺. The combination mechanism of CBM with Cu²⁺ was nicely explored by density functional theory studies. The probe CBM has good cell permeability, fluorescence electron microscopy experiments show that CBM can be used as a fluorescent probe to detect the presence or absence of Cu²⁺ in Hela cells. Furthermore, the probe CBM can also be used for the detection of copper ions in actual water samples.     

FRET‐based Fluorescent and Colorimetric Probe for Selective Detection of Hg(II) and Cu(II) with Dual‐mode

A dual‐function fluorescence resonance energy transfer (FRET)‐based fluorescent and colorimetric probe was rationally fabricated from an energy donor coumarin moiety and an energy acceptor rhodamine moiety linked by a thiohydrazide arm for selective detection of Hg²⁺ and Cu²⁺. Two distinct mechanisms were used for the selective detection. Results revealed that probe 1 showed high fluorescent selectivity towards Hg²⁺ and evident colorimetric selectivity for Cu²⁺, which was suitable for ‘naked‐eye’ detection.     

An Aurone‐derived Low‐molecular‐weight Fluorescence Probe for the Detection of Hg2+ in Aqueous Solution and Living Cells

A low‐molecular‐weight fluorescent probe 1 (M.W. = 238.24) based on aurone was synthesized, and its application in fluorescent detection of Hg²⁺ in aqueous solution and living cells was reported. It exhibited an “on–off” fluorescent response toward Hg²⁺ in aqueous solution. Both the color and fluorescence changes of the probe were remarkably specific for Hg²⁺ in the presence of other common metal ions, satisfying the selective requirements for biomedical and environmental monitoring application. The probe has been applied in direct measurement of Hg²⁺ content in river water samples and imaging of Hg²⁺ in living cells, which further indicates the potential application values in environmental and biological systems.     

A New Disubstituted Polyacetylene for the Detection of α‐Amino Acids

New imidazole‐functionalized disubstituted polyacetylene was synthesized by utilizing the postfunctional strategy. In addition, its ability to sense copper ions and α‐amino acids by fluorescence quenching has been studied. The quenching of the fluorescence of the imidazole‐functionalized disubstituted polyacetylene was observed at a very low level of Cu²⁺ (7.0 × 10⁻⁷ mol · L⁻¹). The fluorescent intensity decreased rapidly upon the increase of the concentration of the added solution of Cu²⁺. It was expected that the addition of α‐amino acids to the solution of the polyacetylene/Cu²⁺ complex could turn on the fluorescence of the polyacetylene, if α‐amino acids could remove the copper ions from the complex. Glycine, was used for testing: upon the addition of glycine the quenched fluorescence of P1 turned on immediately. The detection limit was as low as 6.0 × 10⁻⁵ mol · L⁻¹.

     

A New,Highly Potent 1,8‐Naphthalimide‐based Fluorescence “Turn off” Chemosensor Capable of Cu2+ Detection in China's Yellow River Water Samples

A new 1,8‐naphthalimide‐based fluorescence “turn off” chemosensor, N‐phenyl‐4‐(3,3′‐((2‐aminoethyl)azanediyl)dipropanoic acid)‐1,8‐naphthalimide ( MAST ), for the detection of Cu²⁺ was synthesized. Upon treatment with Cu²⁺, in coexistence with various competitive metal ions in HEPES‐buffered dimethylsulfoxide (DMSO) solution (v/v, 1:1; pH 7.4), MAST displayed a high selectivity toward Cu²⁺ with a fluorescence quenching of 83.67%. Additionally, a good linear response of MAST for the detection of Cu²⁺ was obtained in the concentration range of 10 × 10⁻⁶ to 50 × 10⁻⁶ M. A 1:1 stoichiometric interaction of MAST with Cu²⁺ was observed, and the association constant and detection limit were calculated to be 1.37 × 10⁶ and 0.69 × 10⁻⁸ M, respectively. The sensing mechanism of the chemosensor toward Cu²⁺ was proposed due to the effect of the paramagnetic nature of Cu²⁺ and reverse‐photo‐induced electron transfer (PET) process. Ultimately, the proposed chemosensor was applied to quantify Cu²⁺ in real‐world water samples, with excellent recovery rates of 98.00–109.80% observed.     

Influence of Donor on the Sensing Performance of a Series of Through‐Bond Energy Transfer‐Based Two‐photon Fluorescent Cu2+ Probes

Optical properties of a series of molecular two‐photon fluorescent Cu²⁺ probes containing the same acceptor (rhodamine group) are analyzed using time‐dependent density functional theory in combination with analytical response theory. Special emphasis is placed on evolution of the probes' optical properties in the presence of Cu²⁺. In this study, the compound with naphthalene as the donor is shown to be excellent ratiometric fluorescent chemosensor, whereas the compound with quinoline derivative as the donor shows off/on‐typed colorimetric fluorescent response. For the compound with naphthalimide derivative as the donor, changing the connection between the donor and acceptor can efficiently prevent the fluorescent quenching of the probe both in the absence and presence of Cu²⁺. The donor moiety and the connection between donor and acceptor are thus found to play dominant roles on sensing performance of these probes. Moreover, distributions of molecular orbitals involved in the excitation and emission of the probes are analyzed to explore responsive mechanism of the probes. The through‐bond energy transfer process is theoretically demonstrated. Our results are used to elucidate the available experimental measurements. This work is helpful to understand the relationships of structure with optical properties for the studied probes.     

Selective Detection of Hg2+ Ions with Boron Dipyrromethene‐Based Fluorescent Probes Appended with a Bis(1,2,3‐triazole)amino Receptor

By using a copper‐promoted alkyne–azide cycloaddition reaction, two boron dipyrromethene (BODIPY) derivatives bearing a bis(1,2,3‐triazole)amino receptor at the meso position were prepared and characterized. For the analogue with two terminal triethylene glycol chains, the fluorescence emission at 509 nm responded selectively toward Hg²⁺ ions, which greatly increased the fluorescence quantum yield from 0.003 to 0.25 as a result of inhibition of the photoinduced electron transfer (PET) process. By introducing two additional rhodamine moieties at the termini, the resulting conjugate could also detect Hg²⁺ ions in a highly selective manner. Upon excitation at the BODIPY core, the fluorescence emission of rhodamine at 580 nm was observed and the intensity increased substantially upon addition of Hg²⁺ ions due to inhibition of the PET process followed by highly efficient fluorescence resonance energy transfer (FRET) from the BODIPY core to the rhodamine moieties. The Hg²⁺‐responsive fluorescence change of these two probes could be easily seen with the naked eye. The binding stoichiometry between the probes and Hg²⁺ ions in CH₃CN was determined to be 1:2 by Job′s plot analysis and ¹H NMR titration, and the binding constants were found to be (1.2±0.1)×10¹¹ m ^?2 and (1.3±0.3)×10¹⁰ m ^?2, respectively. The overall results suggest that these two BODIPY derivatives can serve as highly selective fluorescent probes for Hg²⁺ ions. The rhodamine derivative makes use of a combined PET‐FRET sensing mechanism which can greatly increase the sensitivity of detection.     

A New Fluorescent Chemosensor for Metal Ions Based upon 1,8‐Naphthalimide and 8‐Hydroxyquinoline

A new fluorescent chemosensor based upon 1,8‐naphthalimide and 8‐hydroxyquinoline was synthesized, and its fluorescent properties in the presence of different metal cations (Hg²⁺, Ag⁺, Zn²⁺, Fe²⁺, Cd²⁺, Pb²⁺, Ca²⁺, Cu²⁺, Mg²⁺, and Ba²⁺) were investigated. It displayed fluorescence quenching with some heavy and transition metal (HTM) ions, and the quenching strongly depended on the nature of HTM ions.     

New Insight in Copper‐Ion Binding to Human Islet Amyloid: The Contribution of Metal‐Complex Speciation To Reveal the Polypeptide Toxicity

Type‐2 diabetes (T2D) is considered to be a potential threat on a global level. Recently, T2D has been listed as a misfolding disease, such as Alzheimer's and Parkinson's diseases. Human islet amyloid polypeptide (hIAPP) is a molecule cosecreted in pancreatic β cells and represents the main constituent of an aggregated amyloid found in individuals affected by T2D. The trace‐element serum level is significantly influenced during the development of diabetes. In particular, the dys‐homeostasis of Cu²⁺ ions may adversely affect the course of the disease. Conflicting results have been reported on the protective role played by complex species formed by Cu²⁺ ions with hIAPP or its peptide fragments in vitro. The histidine (His) residue at position 18 represents the main binding site for the metal ion, but contrasting results have been reported on other residues involved in metal‐ion coordination, in particular those toward the N or C terminus. Sequences that encompass regions 17–29 and 14–22 were used to discriminate between the two models of the hIAPP coordination mode. Due to poor solubility in water, poly(ethylene glycol) (PEG) derivatives were synthesized. A peptide fragment that encompasses the 17–29 region of rat amylin (rIAPP) in which the arginine residue at position 18 was substituted by a histidine residue was also obtained to assess that the PEG moiety does not alter the peptide secondary structure. The complex species formed by Cu²⁺ ions with Ac‐PEG‐hIAPP(17–29)‐NH₂, Ac‐rIAPP(17–29)R18H‐NH₂, and Ac‐PEG‐hIAPP(14–22)‐NH₂ were studied by using potentiometric titrations coupled with spectroscopic methods (UV/Vis, circular dichroism, and EPR). The combined thermodynamic and spectroscopic approach allowed us to demonstrate that hIAPP is able to bind Cu²⁺ ions starting from the His18 imidazole nitrogen atom toward the N‐terminus domain. The stability constants of copper(II) complexes with Ac‐PEG‐hIAPP(14–22)‐NH₂ were used to simulate the different experimental conditions under which aggregate formation and oxidative stress of hIAPP has been reported. Speciation unveils: 1) the protective role played by increased amounts of Cu²⁺ ions on the hIAPP fibrillary aggregation, 2) the effect of adventitious trace amounts of Cu²⁺ ions present in phosphate‐buffered saline (PBS), and 3) a reducing fluorogenic probe on H₂O₂ production attributed to the polypeptide alone.     

Reversible and Selective Fluorescence Detection of Histidine Using a Naphthalimide‐Based Chemosensing Ensemble

We described a new ensemble‐approach‐based chemosensor, NCH‐Cu²⁺, for highly selective and reversible detection of histidine (His) in aqueous solution and live cells. The ligand NCH exhibited specific binding with Cu²⁺ ions over other metal ions, accompanied with a 92.2 % fluorescence quenching. The decomplexation of NCH‐Cu²⁺ ensemble by His led to the liberation of the fluorophore, NCH, and thus the fluorescence was recovered. The specific fluorescence enhancement of NCH‐Cu²⁺ towards His showed a good linearity with a detection of limit at 70 nm . Quantification of intracellular His at the single cell level was achieved by microscopy and flow cytometry. Besides the UV/Vis and emission titration, reversibility of the NCH‐Cu²⁺ towards His was further confirmed by imaging and cytometry analysis. In addition, microscopy studies revealed that NCH‐Cu²⁺ was distributed in the lysosome of live cells, where it could be employed as a fluorescent biosensor for imaging of His at subcellular level.     

Calix[4]Resorcinarene Macrocycles Interactions with Cd2+, Hg2+, Pb2+, and Cu2+ Cations: A QCM‐I and Langmuir Ultra‐thin Monolayers Study

Stable ultra‐thin Langmuir monolayers of calix[4]resorcinarene derivatives, namely: C‐dec‐9‐enylcalix[4]resorcinarene‐O‐(R+)‐α‐methylbenzylamine (Ionophore I ), and C‐dec‐9‐enylcalix[4]resorcinarene‐O‐(S‐)‐α‐methylbenzylamine (Ionophore II ), were prepared at the air‐water interface. Their interactions with a series of heavy metals (HM) ions (Cu²⁺, Pb²⁺, Hg²⁺ and Cd²⁺) present in the aqueous subphase were investigated by measuring surface pressure‐area isotherms, at different concentrations. The surface pressure‐area (Π‐A) isotherms were stable and demonstrated the HM amounts influence on the limiting area (A_lim) values, therefore confirming the examined macrocycles capability to host the metallic toxicants. Additionally, a HM concentration dependence was realized and interpreted by a selective tendency of both ionophores towards Cu²⁺ and Cd²⁺ ions over Pb²⁺ and Hg²⁺, especially at high concentrations. The HM ions interactions with the applied calix[4]resorcinarene Langmuir ultra‐thin monolayers were interpreted based on the Gibbs‐Shishkovsky adsorption equation. Moreover, quartz crystal microbalance with impedance measurement (QCM‐I), was applied for the detection of HM ions in solutions. The QCM‐I results showed the effectiveness of the coated QCM‐I crystals in detecting the ions at different concentrations. The detection limit values were in the order of 0.16, 0.3, 0.65, 1.1 ppm (Ionophore I), as well 0.11, 0.45, 0.2, 0.89 (Ionophore II) for the Cu²⁺, Pb²⁺, Hg²⁺ and Cd²⁺ cations, respectively. Additionally, a selective tendency of both ionophores towards copper ions was shown.     

A fluorescent probe based on N-butylbenzene-1,2-diamine for Cu(II) and its imaging in living cells

A fluorescent probe LZ-N with naphthalimide as fluorophore and N-butylbenzene-1,2-diamine as a new recognition moiety for copper ion was designed and synthesized. The probe LZ-N exhibits high selectivity for Cu²⁺ ion in aqueous media (CH₃CN:H₂O = 1:1) over all the other metal ions in our study, more than 20-fold fluorescence enhancement by coordinating with Cu²⁺, and the maximum emission intensity independence in the range of pH 2.06–9.25. The results of ¹H-NMR titration, time-resolved fluorescence decay measurement, and computational optimization illuminate the mechanisms of Cu²⁺ and probe LZ-N. Confocal fluorescence images and cell viability values test show the high fluorescence enhancement of probe LZ-N for exogenous Cu²⁺ in living cells.     

Green Synthesis of Red‐Emitting Carbon Nanodots as a Novel “Turn‐on” Nanothermometer in Living Cells

Temperature measurements in biology and medical diagnostics, along with sensitive temperature probing of living cells, is of great importance; however, it still faces significant challenges. Herein, a novel “turn‐on” carbon‐dot‐based fluorescent nanothermometry device for spatially resolved temperature measurements in living cells is presented. The carbon nanodots (CNDs) are prepared by a green microwave‐assisted method and exhibit red fluorescence (λ_em=615 nm) with high quantum yields (15 %). Then, an on–off fluorescent probe is prepared for detecting glutathione (GSH) based on aggregation‐induced fluorescence quenching. Interestingly, the quenched fluorescence could be recovered by increasing temperature and the CNDs–GSH mixture could behave as an off–on fluorescent probe for temperature. Thus, red‐emitting CNDs can be utilized for “turn‐on” fluorescent nanothermometry through the fluorescence quenching and recovery processes, respectively. We employ MC3T3‐E1 cells as an example model to demonstrate the red‐emitting CNDs can function as “non‐contact” tools for the accurate measurement of temperature and its gradient inside a living cell.     

A S2O32−‐Enhanced Fluorogenic Chemosensor for Fe3+ in Aqueous Media Based on a Boron–Fluorine Derivative

A fluorescent “turn‐on” probe for Fe³⁺ was investigated in an aqueous system based on a boron 2‐(2′‐pyridyl) imidazole complex (BOPIM‐dma). BOPIM‐dma shows weak or no fluorescence in polar solvents due to twisted intramolecular charge transfer, but the addition of Fe³⁺ to BOPIM‐dma leads to fluorescence switch‐on responses. The binding is highly selective to Fe³⁺ over other metal ions, indicating that BOPIM‐dma is a chemodosimeter for Fe³⁺. Furthermore, the existence of S₂O₃²⁻ could much enhance and stabilize the emission significantly, indicating that the BOPIM‐dma/Fe³⁺/S₂O₃²⁻ complexes are a strong fluorescence system, and can be used as a sensitive detector for Fe³⁺, with the limit of detection of 6.0 × 10⁻⁷ mol L⁻¹.