Synthesis and properties of novel polyimides from sulfonated binaphthalene dianhydride for proton exchange membranes

A sulfonated dianhydride monomer, 6,6′‐disulfonic‐4,4′‐binaphthyl‐1,1′,8,8′‐tetracarboxylic dianhydride (SBTDA), was successfully synthesized by direct sulfonation of the parent dianhydride, 4,4′‐binaphthyl‐1,1′,8,8′‐tetracarboxylic dianhydride (BTDA), using fuming sulfuric acid as the sulfonating reagent. A series of sulfonated homopolyimides were prepared from SBTDA and various common nonsulfonated diamines. The resulting polymer electrolytes, which contain ion conductivity sites on the deactivated positions of the aryl backbone rings, displayed high proton conductivities of 0.25–0.31 S cm^?1 at 80 °C. The oxidative stability test indicated that the attachment of the ? SO₃H groups onto the dianhydride units did not deteriorate the oxidative stability of the SPI membranes. The better membranes were achieved by the copolymerization of nonsulfonated diamine, SBTDA, and BTDA. Copolymer membrane synthesized from hexane‐1,6‐diamine, SBTDA, and BTDA displayed excellent water stability of more than 1000 h at 90 °C, while its proton conductivity was still at a high level (comparable to that of Nafion 117). Furthermore, the novel block copolymer ( II‐b ) displayed higher proton conductivity compared with the random one ( II‐r ) obviously, probably due to the slightly higher water uptake and better microphase separated morphology. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2820–2832, 2008     

Crosslinking effects on hybrid organic–inorganic proton conducting membranes based on sulfonated polystyrene and polysiloxane

New hybrid semi‐interpenetrating proton‐conducting membranes were obtained using sulfonated polystyrene (SPS) and inorganic–organic polysiloxane phases with the aim of improving the mechanical and thermal characteristics of the pristine polymer and to study the effects of crosslinking in the latter phase in several of their properties, mainly proton conductivity. Siloxane phases were prepared using poly(dimethylsiloxane) (PDMS) and PDMS with tetraethoxysilane (TEOS) or phenyltrimethoxysilane (PTMS) as crosslinking agents. To study the crosslinking effect, membranes were prepared with different TEOS:PDMS and PTMS:PDMS mole ratios. The films obtained were characterized by FTIR, ²⁹Si‐HPDEC MAS‐NMR, ¹³C‐CP‐MAS NMR, elemental and thermal analyses. Certain properties, such as water uptake (WU), ion exchange capacity (IEC) and the state of the water, were determined. The proton conductivity was measured at different temperatures (30°C and 80°C) and relative humidities (50–95%). The water content of the hybrid membranes declined significantly, compared with the SPS membranes, depending on the nature and amount of siloxane phase added. Nonetheless, the conductivity values remained relatively high (>100 mS cm^?1 at 80°C and 95% RH) when compared to Nafion®117 presumably because of the formation of well developed proton channels, which makes them potentially promising as proton exchange membranes for fuel cells. These membranes proved to be thermally stable up to 350°C. Scanning electron microscopy (SEM) and scanning electrochemical microscopy (SECM) were used to characterize the hybrid membranes microstructures; the latter provided contrast for the conductive domains. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoregulation of α‐Chymotrypsin Activity by Spiropyran‐Based Inhibitors in Solution and Attached to an Optical Fiber

Here the synthesis and characterization of a new class of spiropyran‐based protease inhibitor is reported that can be reversibly photoswitched between an active spiropyran (SP) isomer and a less active merocyanine (MC) isomer upon irradiation with UV and visible light, respectively, both in solution and on a surface of a microstructured optical fiber (MOF). The most potent inhibitor in the series ( SP ‐ 3 b ) has a C‐terminal phenylalanyl‐based α‐ketoester group and inhibits α‐chymotrypsin with a K_i of 115 nM . An analogue containing a C‐terminal Weinreb amide ( SP‐2 d ) demonstrated excellent stability and photoswitching in solution and was attached to the surface of a MOF. The SP isomer of Weinreb amide 2 d is a competitive reversible inhibitor in solution and also on fiber, while the corresponding MC isomer was significantly less active in both media. The ability of this new class of spiropyran‐based protease inhibitor to modulate enzyme activity on a MOF paves the way for sensing applications.     

Morphological investigations of block sulfonated poly(arylene ether ketone) copolymers as potential proton exchange membranes

A series of block sulfonated poly(arylene ether ketone) (SPAEK) copolymers with different block lengths and ionic contents were synthesized by a two‐stage process. The morphology of these block SPAEK copolymers was investigated by various methods, such as differential scanning calorimetry (DSC), transmission electron microscope (TEM), and small angle X‐ray scattering (SAXS). Dark colored ionic domains of hundreds of nanometers spreading as a cloud‐like belt were observed in TEM images. The sizes of the ionic domains as a function of block copolymer composition were determined from SAXS curves. The results for the evolution of ionic domains revealed that the block copolymers exhibited more clearly phase‐separated microstructure with increasing ionic contents and hydrophobic sequence lengths. Proton conductivity is closely related to the microstructure, especially the presence of large interconnected ionic domains or ionic channels. Block SPAEK membranes have interconnected ionic clusters to provide continuous hydrophilic channels, resulting in higher proton conductivity. Copyright © 2010 John Wiley & Sons, Ltd.     

金属有机框架材料在质子交换膜燃料电池中的潜在应用

金属有机框架亦称作多孔配位网状结构,是一种多孔晶态材料,具有结构可设计、孔壁可功能化修饰、高度晶态化、比表面积大及优良的导电性等诸多优点,使其在能源转换及储存方面备受关注。本文详细介绍了新型金属有机框架质子导体及电催化剂在燃料电池方面的相关研究;综述了国内外近年来在金属有机框架质子交换膜和氧还原电催化领域所取得的一些重要进展,例如金属有机框架质子交换膜电导率可高达1.82 S·cm^-1（70℃,90% RH）,金属有机框架电催化剂作为阴极在膜电极测试中可产生0.91 W·cm^-2（0.6 V）的峰值功率密度;并指出了金属有机框架在质子交换膜和电催化剂研究中存在的问题,这为今后开发高电导性质子交换膜和高催化活性电催化提供了新思路。     

Proton conducting composite membranes from polysulfone and heteropolyacid for fuel cell applications

The viability of using composite membranes of heteropolyacid (HPA)/polysulfone (PSF), HPA/sulfonated polysulfone (SPSF) for use in proton exchange membrane fuel cells (PEMFC) was investigated. PSF and its sulfonated polymer, SPSF was solution‐blended with phosphotungstic acid, a commercially available HPA. Fourier transform infrared (FTIR) spectroscopy of the HPA–40/SPSF composite exhibited band shifts showing a possibility of intermolecular hydrogen bonding interaction between the HPA additive and the sulfonated polymer. The composite membranes exhibited improved mechanical strength and low water uptake. The conductivity of the composite membrane, HPA–40/SPSF, consisting of 40 wt % HPA and 60 wt % SPSF [with a degree of Sulfonation (DS) of 40%] exhibited a conductivity 0.089 S/cm at room temperature that linearly increased upto 0.14 S/cm at 120 °C, whereas the widely used commercial membrane Nafion 117, exhibited a room temperature conductivity of 0.1 S/cm that increased to only 0.12 S/cm at 120 °C. In contrast, the composite of HPA–40/PSF exhibited a proton conductivity of 0.02 S/cm at room temperature that increased only to 0.07 S/cm at a temperature of 100 °C. The incorporation of HPA into SPSF not only rendered the membranes suitable for elevated temperature operation of PEMFC but also provides an inexpensive alternative compared to Nafion. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1538–1547, 2005     

Synthesis and properties of novel sulfonated polyimides containing 1,5‐naphthylene moieties

A series of novel sulfonated polyimides (equivalent weight per sulfonic acid = 310–744 g/equiv) containing 10–70 mol % 1,5‐naphthylene moieties were synthesized as potential electrolyte materials for high‐temperature polymer electrolyte fuel cells. The polycondensation of 1,4,5,8‐naphthalene tetracarboxylic dianhydride, 4,4′‐diamino‐2,2′‐biphenyldisulfonic acid, and 1,5‐diaminonaphthalene gave the title polymer electrolytes. The polyimide electrolytes were high‐molecular‐weight (number‐average molecular weight = 36.0–350.7 × 10³ and weight‐average molecular weight = 70.4–598.5 × 10³) and formed flexible and tough films. The thermal properties (decomposition temperature > 260 °C, no glass‐transition temperature), stability to oxidation, and water absorption were analyzed and compared with those of perfluorosulfonic acid polymers. The polyimide containing 20 mol % 1,5‐naphthylene moieties showed higher proton conductivity (0.3 S cm^?1) at 120 °C and 100% relative humidity than perfluorosulfonic acid polymers. The temperature and humidity dependence of the proton conductivity was examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3901–3907, 2003     

Synthesis and properties of polyimides bearing acid groups on long pendant aliphatic chains

A series of novel polyimide electrolytes having long pendant sulfo‐ or phosphoalkoxy groups were synthesized for fuel‐cell applications. Sulfodecyloxy‐, phosphodecyloxy‐, and sulfophenoxydodecyloxy‐substituted benzidine monomers were synthesized from dihydroxybenzidine. These monomers were copolymerized with naphthalene tetracarboxylic dianhydride and fluorenylidene dianiline to give the corresponding polyimides. A flexible, ductile, and self‐standing membrane was obtained via casting from the polyimide solution. Because the acid groups were on long pendant side chains and away from the main chains, the polyimide membrane showed improved oxidative and hydrolytic stability in comparison with the polyimides with sulfonic acid groups on the main chains or on the short side chains. High thermal stability (no glass‐transition temperature and a decomposition temperature > 200 °C) was also obtained. The polyimide membrane displayed high proton conductivity of 10^?1 S cm^?1 at 120 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3995–4005, 2006     

Synthesis and properties of polyimide ionomers containing sulfoalkoxy and fluorenyl groups

A series of sulfopropylated and sulfobutylated polyimide copolymers containing fluorenyl groups, SPI‐4, were synthesized to investigate the effect of alkyl side chains on the properties (stability, mechanical strength, water uptake, and proton conductivity) of the polymimide electrolyte membranes. SPI‐4 showed much better hydrolytic stability (in 10% MeOH aq at 100 °C) than the main chain sulfonated polyimide, SPI‐1. Tough, flexible, and ductile membranes were obtained from these copolymers. At high relative humidity all the SPI‐4 membranes showed high mechanical properties (>34 MPa of the maximum stress) and proton conductivity (>0.1 Scm^?1). These properties are comparable to or even better than those of the perfluorosulfonic acid ionomer (Nafion 112). The new polyimide ionomers have proved to be a possible candidate as polymer electrolyte membrane for PEFCs and DMFCs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4439–4445, 2005     

多磺化侧链型聚芳醚的合成及性能

本文通过对聚合物的结构设计,采用亲和取代的途径制备了含有甲氧基侧链的聚芳醚聚合物,然后去醚化得到了侧链含有羟基的聚芳醚材料,最后通过接枝的方法将磺酸基团引入聚合物成功的制备出多磺化侧链型聚芳醚质子交换膜材料。此类材料表现出好的热化学稳定性, 80 oC时的质子传导率可达到0.192 S/cm,超过了Nafion 117 薄膜的传导率.同时此类材料表现出低的尺寸稳定性。因此此类材料很有希望在质子交换膜领域得到应用     

Proton‐conductive membranes based on blends of polyimides

We prepared novel proton‐conductivity membranes based on blends of sulfonated polyimides. The blend membranes were prepared from a sulfonated homopolyimide and a sulfonated copolyimide with a solvent‐casting method. The proton conductivities of the blend membranes were measured as functions of the temperature with four‐point‐probe electrochemical impedance spectroscopy. The conductivity of the membranes strongly depended on the sulfonated homopolyimide content and increased with an increase in the content. The proton conductivity of all the blended membranes indicated a higher value than that determined in Nafion at 80 °C, and this may mean that the proton transfer in the blend membranes is responsible for the ionic channels induced by the hydrophobic and hydrophilic domains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1325–1332, 2007     

新颖无机质子传导材料的研究进展

质子传导在燃料电池、气体传感及电致显色等领域有重要的研究前景.尤其是在燃料电池领域,由于其具有低污染、高效率、操作简单和寿命长等优点而被广泛应用.本文介绍了质子传导在质子交换膜燃料电池中的重要作用及工作原理,分析了质子交换膜的质子传导机理,并简要分析总结了近年来关于无机及其复合质子导体材料的研究进展.     

Synthesis of highly sulfonated poly(arylene ether sulfone) random (statistical) copolymers via direct polymerization

Novel biphenol‐based wholly aromatic poly (arylene ether sulfones) containing pendant sulfonate groups were prepared by direct aromatic nucleophilic substitution polycondensation of disodium 3,3′‐disulfonate‐4,4′‐dichlorodiphenyl sulfone (SDCDPS), 4,4′‐dichlorodiphenylsulfone (DCDPS) and biphenol. Copolymerization proceeded quantitatively to high molecular weight in N‐methyl‐2‐pyrrolidinone at 190°C in the presence of anhydrous potassium carbonate. Tough membranes were successfully cast from the control and the copolymers, which had a SDCDPS/DCDPS mole ratio of either 40:60 or 60:40 using N,N‐dimethylactamide; the 100% SDCDPS homopolymer was water soluble. Short‐term aging (30 min) indicates that the desired acid form membranes are stable to 220°C in air and conductivity values at 25°C of 0.110 (40%) and 0.170 S/cm (60%) were measured, which are comparable to or higher than the state‐of‐the art fluorinated copolymer Nafion 1135 control. The new copolymers, which contain ion conductivity sites on deactivated rings, are candidates as new polymeric electrolyte materials for proton exchange membrane (PEM) fuel cells. Further research comparing their membrane behavior to post‐sulfonated systems is in progress.     

Copoly(arylene ether nitrile) and copoly(arylene ether sulfone) ionomers with pendant sulfobenzoyl groups for proton conducting fuel cell membranes

Three series of fully aromatic ionomers with naphthalene moieties and pendant sulfobenzoyl side chains were prepared via K₂CO₃ mediated nucleophilic aromatic substitution reactions. The first series consisted of poly(arylene ether)s prepared by polycondensations of 2,6‐difluoro‐2′‐sulfobenzophenone (DFSBP) and 2,6‐dihydroxynaphthalene or 2,7‐dihydroxynaphthalene (2,7‐DHN). In the second series, copoly(arylene ether nitrile)s with different ion‐exchange capacities (IECs) were prepared by polycondensations of DFSBP, 2,6‐difluorobenzonitrile (DFBN), and 2,7‐DHN. In the third series, bis(4‐fluorophenyl)sulfone was used instead of DFBN to prepare copoly(arylene ether sulfone)s. Thus, all the ionomers had sulfonic acid units placed in stable positions close to the electron withdrawing ketone link of the side chains. Mechanically strong proton‐exchange membranes with IECs between 1.1 and 2.3 meq g⁻¹ were cast from dimethylsulfoxide solutions. High thermal stability was indicted by high degradation temperatures between 266 and 287 °C (1 °C min⁻¹ under air) and high glass transition temperatures between 245 and 306 °C, depending on the IEC. The copolymer membranes reached proton conductivities of 0.3 S cm⁻¹ under fully humidified conditions. At IECs above ∼1.6 meq g⁻¹, the copolymer membranes reached higher proton conductivities than Nafion^® in the range between −20 and 120 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Nanostructured Proton-Conducting Membranes for Fuel Cell Applications

Summary: Composite polymer membranes based on sulfonated poly(arylene ether sulfone) (SPSU) containing benzimidazole derivatives (BIzD) and heteropolyacid for use in fuel cells were prepared. The effects of both the increment in BBIzD component and the procedure of mixing on the morphology and proton conductivity were investigated. The heteropolyacid (HPA) extracted in water decreased with the addition of BBIzD in the composite. The interactions developed among the sulfonate groups, the benzimidazole derivatives and the HPA were verified by Fourier transform infrared (FTIR). The network of interactions established in the composite membrane based on SPSU containing benzimidazole derivatives and phosphotungstic acid (HPW) in the ratio of SPSU/BBIzC₄(8:1) in equivalents and SPSU/HPW(7:3) in mass resulted in a very high proton conductivity at 110 °C.     

Triazole Functionalized Sol-Gel Membranes,Effect of Crosslink Density and Heterocycle Content on Water Free Proton Conduction and Membrane Mechanical Properties

Freestanding, ion conducting, membranes were synthesized by incorporating triazole-containing tetracyclosiloxanes into a polyethylene glycol-tetraethyl orthosilicate (PEG-TEOS) based sol-gel matrix. These membranes show comparable or higher proton conductivities than their linear, liquid, polysiloxane analogs and fall within an order of magnitude of the target ion mobilities for use in proton exchange membrane fuel cells (PEMFC's). The absence of any unbound PEG or cyclic siloxane was confirmed by proton nuclear magnetic resonance (¹H-NMR), while the chemical structure and composition of the membranes was corroborated by Fourier transform infrared (FTIR) spectroscopy. Thermogravimetric analysis (TGA) indicated that the membranes are stable up to 180°C and differential scanning calorimetry (DSC) analysis showed complete suppression of PEG crystallization after incorporation of the triazole-functionalized cyclosiloxanes. An increase in the molecular weight of the PEG chains used to create the sol-gel matrix produced membranes with increased flexibility and higher proton conductivities at temperatures below 100 °C. Pulse field gradient echo (PFG) NMR studies showed an increase in the apparent diffusion coefficient of the sol-gel threaded cyclosiloxane motifs compared to the linear polysiloxanes, indicating a significant reduction on the coupling between mechanical strength and ion transport capability.     

Synthesis and Characterization of Sulfonated Polyimides Containing Trifluoromethyl Groups as Proton Exchange Membranes

A novel sulfonated diamine, 4,4′‐bis(4‐amino‐3‐trifluoromethylphenoxy) biphenyl 3,3′‐disulfonic acid (F‐BAPBDS), was successfully synthesized by nucleophilic aromatic substitution of 4,4′‐dihydroxybiphenyl with 2‐chloro‐5‐nitrobenzotrifluoride, followed by reduction and sulfonation. A series of sulfonated polyimides of high molecular weight (SPI‐x, x represents the molar percentage of the sulfonated monomer) were prepared by copolymerization of 1,4,5,8‐naphathlenetetracarboxylic dianhydride (NTDA) with F‐BAPBDS and nonsulfonated diamine. Flexible and tough membranes of high mechanical strength were obtained by solution casting and the electrolyte properties of the polymers were intensively investigated. The copolymer membranes exhibited excellent oxidative stability due to the introducing of the CF₃ groups. The SPI membranes displayed desirable proton conductivity (0.52×10⁻¹–0.97×10⁻¹ S·cm⁻¹) and low methanol permeability (less than 2.8×10⁻⁷ cm²·s⁻¹). The highest proton conductivity (1.89×10⁻¹ S·cm⁻¹) was obtained for the SPI‐90 membrane at 80°C, with an IEC of 2.12 mequiv/g. This value is higher than that of Nafion 117 (1.7×10⁻¹ S·cm⁻¹). Furthermore, the hydrolytic stability of the obtained SPIs is better than the BDSA and ODADS based SPIs due to the hydrophobic CF₃ groups which protect the imide ring from being attacked by water molecules, in spite of its strong electron‐withdrawing behaviors.