How Many Phosphoric Acid Units Are Required to Ensure Uniform Occlusion of Sterically Stabilized Nanoparticles within Calcite?

Polymerization‐induced self‐assembly (PISA) mediated by reversible addition–fragmentation chain transfer (RAFT) polymerization offers a platform technology for the efficient and versatile synthesis of well‐defined sterically stabilized block copolymer nanoparticles. Herein we synthesize a series of such nanoparticles with tunable anionic charge density within the stabilizer chains, which are prepared via statistical copolymerization of anionic 2‐(phosphonooxy)ethyl methacrylate (P) with non‐ionic glycerol monomethacrylate (G). Systematic variation of the P/G molar ratio enables elucidation of the minimum number of phosphate groups per copolymer chain required to promote nanoparticle occlusion within a model inorganic crystal (calcite). Moreover, the extent of nanoparticle occlusion correlates strongly with the phosphate content of the steric stabilizer chains. This study is the first to examine the effect of systemically varying the anionic charge density of nanoparticles on their occlusion efficiency and sheds new light on maximizing the loading of guest nanoparticles within calcite host crystals.     

Spatially Controlled Occlusion of Polymer‐Stabilized Gold Nanoparticles within ZnO

In principle, incorporating nanoparticles into growing crystals offers an attractive and highly convenient route for the production of a wide range of novel nanocomposites. Herein we describe an efficient aqueous route that enables the spatially controlled occlusion of gold nanoparticles (AuNPs) within ZnO crystals at up to 20 % by mass. Depending on the precise synthesis protocol, these AuNPs can be (i) solely located within a central region, (ii) uniformly distributed throughout the ZnO host crystal or (iii) confined to a surface layer. Remarkably, such efficient occlusion is mediated by a non‐ionic water‐soluble polymer, poly(glycerol monomethacrylate)₇₀ (G₇₀), which is chemically grafted to the AuNPs; pendent cis‐diol side groups on this steric stabilizer bind Zn²⁺ cations, which promotes nanoparticle interaction with the growing ZnO crystals. Finally, uniform occlusion of G₇₀‐AuNPs within this inorganic host leads to faster UV‐induced photodegradation of a model dye.     

Particle-rod hybrids: growth of arachidic acid molecular rods from capped cadmium selenide nanoparticles

This communication describes a spin-coating method to nucleate organic molecular rods of uniform size from an inorganic nanoparticle at a solid surface. The particle-rod hybrid structure spontaneously forms when a film is spin coated from a mixed 2-propanol solution of arachidic acid (AA) and nanoparticles of cadmium selenide capped by mercaptoundecanoic acid (MUA-CdSe) on graphite. AFM images show that MUA-CdSe nanoparticles nucleate single crystalline rods of AA with a cross section of a single unit cell of the C-form. The solution-based process potentially allows the precise tuning of the wetting profile of the solution on the surface-attached nanoparticle, which provides the reservoir for the growth of the single crystalline rods. The results suggest that nanoparticles can be regarded as nanoseeds for the nucleation of guest crystals. It should be possible to further functionalize the AA rods by electrostatic complexation with metal or organic ions.     

Direct Observation of the Distribution of Gelatin in Calcium Carbonate Crystals by Super‐Resolution Fluorescence Microscopy

Biological organic–inorganic hybrid materials often achieve excellent properties and provide inspiration for the design of advanced materials. The organic phase plays a key role in determining the properties of biogenic materials, and the spatial arrangement of organic and inorganic phases provides direct evidence for interaction between the two phases. Super‐resolution fluorescence microscopy was used to visualize the gelatin distribution in two different crystalline polymorphs of calcium carbonate (vaterite and calcite) and to investigate the process by which gelatin is excluded from the crystals. The results demonstrated that gelatin is distributed through vaterite microspheres in the form of nanoparticles, whereas it tends to accumulate on the edges of the calcite rhombohedra.     

Controlled Deformation of Soft Nanogel Particles Generates Artificial Biominerals with Ordered Internal Structure

Biominerals can exhibit exceptional mechanical properties owing to their hierarchically-ordered organic/inorganic nanocomposite structure. However, synthetic routes to oriented artificial biominerals of comparable complexity remain a formidable technical challenge. Herein we design a series of soft, deformable nanogels that are employed as particulate additives to prepare nanogel@calcite nanocomposite crystals. Remarkably, such nanogels undergo a significant morphological change—from spherical to pseudo-hemispherical—depending on their degree of cross-linking. This deformation occurs normal to the growth direction of the (104) face of the calcite and the underlying occlusion mechanism is revealed by in situ atomic force microscopy studies. This model system provides new mechanistic insights regarding the formation of oriented structures during biomineralization and offers new avenues for the design of synthetic nanocomposites comprising aligned anisotropic nanoparticles.     

Functionalization of iron oxide magnetic nanoparticles with poly(methyl methacrylate) brushes via grafting‐from atom transfer radical polymerization

A key problem with nanomaterials is the difficulty of controlling the dispersion of nanoparticles inside an organic medium. To overcome this problem, functionalization of the nanoparticle surface is required. Poly(methyl methacrylate) (PMMA) brushes were grown on the surface of iron oxide magnetic nanoparticles with atom transfer radical polymerization and a grafting‐from approach. Modified magnetic nanoparticles with a graft density of 0.1 PMMA chains/nm² were obtained. Cu(II), used as a deactivating complex, allowed good control of the polymerization along with a narrow polydispersity of the polymer chains. The functionalized magnetic nanoparticles were characterized with Fourier transform infrared spectroscopy, thermogravimetric analysis, gel permeation chromatography, and atomic force microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 925–932, 2007     

Silica nanoparticle crystals and ordered coatings using lys-sil and a novel coating device

Silica nanoparticles with a narrow particle size distribution and controlled diameters of 10-20 nm are synthesized via hydrolysis and hydrothermal aging of tetraethylorthosilicate in an aqueous L-lysine solution. Cryo-transmission electron microscopy (cryo-TEM) reveals that the silica nanoparticles assemble to form close-packed nanoparticle crystals over short length scales on carbon-coated grids. Evaporative drying of the same sols results in nanoparticle stability and remarkable long-range facile ordering of the silica nanoparticles over scales greater than 10 microm. Whereas small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS) discount the possibility of a core (silica)-shell (lysine) structure, the possibility remains for lysine occlusion within the silica nanoparticles and concomitant hydrogen bonding effects driving self-assembly. Facile ordering of the silica nanoparticles into multilayer and monolayer coatings over square-centimeter areas by evaporation-induced self-assembly is demonstrated using a novel dip-coating device.     

Incorporation of nanogels within calcite single crystals for the storage,protection and controlled release of active compounds

Nanocarriers have tremendous potential for the encapsulation, storage and delivery of active compounds. However, current formulations often employ open structures that achieve efficient loading of active agents, but that suffer undesired leakage and instability of the payloads over time. Here, a straightforward strategy that overcomes these issues is presented, in which protein nanogels are encapsulated within single crystals of calcite (CaCO₃). Demonstrating our approach with bovine serum albumin (BSA) nanogels loaded with (bio)active compounds, including doxorubicin (a chemotherapeutic drug) and lysozyme (an antibacterial enzyme), we show that these nanogels can be occluded within calcite host crystals at levels of up to 45 vol%. Encapsulated within the dense mineral, the active compounds are stable against harsh conditions such as high temperature and pH, and controlled release can be triggered by a simple reduction of the pH. Comparisons with analogous systems – amorphous calcium carbonate, mesoporous vaterite (CaCO₃) polycrystals, and calcite crystals containing polymer vesicles – demonstrate the superior encapsulation performance of the nanogel/calcite system. This opens the door to encapsulating a broad range of existing nanocarrier systems within single crystal hosts for the efficient storage, transport and controlled release of various active guest species.

Nanocarriers have tremendous potential for the encapsulation, storage and delivery of active compounds.     

Functional delivery vehicle of organic nanoparticles in inorganic crystals

Encapsulation of bioactive substances for extended shelf life and controlled, targeted release is critical for their applications in food and drug delivery. Here, a new method has been developed to encapsulate bioactive molecules in the crystal composites, showing greatly enhanced stability and unique pH-triggered response. Chlorophyll, a model bioactive, is first loaded in shellac nanoparticles via co-precipitation with a high encapsulation efficiency, and then the chlorophyll-loaded nanoparticles are incorporated into calcite crystals grown from a gel media containing the nanoparticles. Under the protection of shellac nanoparticles and calcite crystals, chlorophyll shows excellent stability even under light. Encapsulated chlorophyll could only be released by first dissolving the calcite crystals under acidic condition and then dissolving the shellac nanoparticles under alkaline condition. The unique pH-triggered release mimics the pH change from acidic in the stomach to alkaline in the intestine and is thus well suited for controlled, targeted intestinal release. This work suggests that the crystal composites are an ideal delivery vehicle for the functional design of bioactive molecules.     

Generation of core/shell iron oxide magnetic nanoparticles with polystyrene brushes by atom transfer radical polymerization

The functionalization of nanoparticle surfaces is required to improve the dispersion of an inorganic material inside an organic matrix. In this work, polystyrene (PS) brushes were grown on the surface of iron oxide magnetic nanoparticles with atom transfer radical polymerization and a grafting‐from approach. After polymerization, the magnetic nanoparticles had a graft density of 0.9 PS chains/nm². A sacrificial initiator was used to obtain a satisfactory result for the control of the polymerization, as its addition had to generate a sufficient concentration of persistent radicals (deactivator). A variety of techniques, such as Fourier transform infrared spectroscopy, thermogravimetric analysis, gel permeation chromatography, water contact‐angle measurements, and atomic force microscopy, were used to characterize the nanoparticles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4744–4750, 2007     

Gold Nanoparticle‐Based Redox Signal Enhancement for Sensitive Detection of Human Chorionic Gonadotropin Hormone

A sensitive immunosensor for the detection of pregnancy marker, human chorionic gonadotropin hormone (hCG), was developed using the direct electrical detection of Au nanoparticles. We utilized disposable screen‐printed carbon strips (SPCSs) for the development of our immunosensor, which provided cost‐effective tests with the required antigen sample volume as small as 2 μL. After the recognition reaction between the surface‐immobilized primary antibody and hCG, the captured antigen was sandwiched with a secondary antibody that was labeled with Au nanoparticles. Au nanoparticles were exposed to a preoxidation process at 1.2 V for 40 s, which was subsequently followed with a reduction scan on the same surface using differential pulse voltammetry (DPV). We could observe Au nanoparticle‐labeled antigen‐antibody complexes immobilized on the surface of SPCS using scanning electron microscopy (SEM). Additionally, the number of Au nanoparticles on the immunosensor was determined using SEM images, and showed a linear relationship with the current intensity obtained from the DPV measurements with a detection limit of 36 pg/mL hCG (612 fM, 3.6×10^?4 IU/mL). Our immunosensor system, a combination of the screen‐printing technology with Au nanoparticles provides a promising biosensor for various applications in life sciences.     

Surface facets dependent oxygen evolution reaction of single Cu2O nanoparticles

Understanding and establishing the structure-activity relation of nanoparticles is a prerequisite for rational design of high-performance electrocatalysts. Cu₂O nanoparticles enclosed with different crystal facets, namely, o-Cu₂O NPs with {111} facets, c-Cu₂O NPs with {100} facets are prepared and their electrocatalytic properties for oxygen evolution reaction (OER) in alkaline condition are evaluated at single nanoparticle level with a combination of scanning electrochemical cell microscopy and scanning electron microscopy. It is found that the o-Cu₂O NPs have significantly superior OER electrocatalytic activity compared to c-Cu₂O, which is almost inert. The estimated turnover frequency (TOF) at 1.97 V vs. RHE on {111} facet increases from 4 s^?1 to 115 s^?1 with the octahedron edge length decreasing from 1.3 µm to 100 nm. Deposition of carbon on c-Cu₂O surface barely promotes the activity, suggesting the inherent poor electric conductivity within the nanocrystal is most likely the reason for low activity. This work provides direct probing to single transition metal oxide crystals with dramatically different activity.     

理性设计核-壳Rh@沸石催化材料用于二烯烃选择加氢反应

Selective hydrogenation of dienes and alkynes to monoenes is an important topic of research in the fields of pharmacology and organic synthesis. Catalyst design plays a key role in this process, where a general principle involves controlling the steric diene adsorption by modifying the surface of the metal nanoparticles. For example, upon introducing Bi species into Rh nanoparticles, the resulting RhBi/SiO₂ showed 90% selectivity to 2-hexene, with 95% conversion of 1, 4-hexadiene under ambient conditions, because of the suppressed adsorption of the internal C＝C bond. However, the catalyst activity decreased remarkably; that is, the activity of the unmodified Rh/SiO₂ was about 27 times higher than that of RhBi/SiO₂. Controlled steric adsorption of the diene molecules could also be achieved by the constructing porous channels around the metal nanoparticles. For example, metal-organic framework (ZIF-8) or mesoporous silica (MCM-41) encapsulated noble metals showed high selectivity for the hydrogenation of terminal C＝C bonds. However, these catalysts had poor durability under the thermal/hydrothermal reaction/regeneration conditions. In contrast, zeolites have superior durability under harsh reaction conditions, but they are rarely used in semi-hydrogenation reactions. We recently found that metal nanoparticles fixed within zeolite crystals (e.g., ZSM-5 and Beta) efficiently catalyze the selective hydrogenation of molecules bearing multiple reducible groups. Thus inspired, we developed a catalyst by fixing Rh nanoparticles within zeolite crystals via an inter-zeolite transformation method. The Rh@CHA catalyst was synthesized by introducing Rh species into the parent Y zeolite (Rh@Y) and transformation of the Y zeolite to chabazite (CHA zeolite) under hydrothermal conditions. X-ray diffraction patterns, N₂ sorption isotherms, scanning/transmission electron microscopy images, and model reactions (hydrogenation of probe molecules) confirmed the successful fixation of the Rh nanoparticles inside the CHA zeolite crystals. As expected, the Rh@CHA catalyst was highly selective for the hydrogenation of dienes. For example, Rh@CHA showed a 2-hexene selectivity of 86.7%, with 91.2% conversion of 1, 4-hexadiene. In contrast, the generally supported Rh nanoparticle catalyst (Rh/CHA) showed a low 2-hexene selectivity of 37.2% under identical reaction conditions. Considering that Rh@CHA and Rh/CHA comprise the same CHA zeolite crystals and have similar Rh nanoparticle sizes, the remarkably high selectivity of Rh@CHA is assigned to the steric adsorption of dienes on the Rh surface controlled by the micropores of the CHA zeolite. This work demonstrates that a zeolite-fixed metal core-shell structure is a powerful tool for developing efficient catalysts to be used in diene hydrogenation.     

Pillar[5]arene‐Mediated Synthesis of Gold Nanoparticles: Size Control and Sensing Capabilities

We present a simple procedure for the synthesis of quasi‐spherical Au nanoparticles in a wide size range mediated by macrocyclic host molecules, ammonium pillar[5]arene (AP[5]A). The strategy is based on a seeded growth process in which the water‐soluble pillar[5]arene undergoes complexation of the Au salt through the ammonium groups, thereby avoiding Au nucleation, while acting as a stabilizer. The presence of the pillar[5]arene onto the Au nanoparticle particle surface is demonstrated by surface‐enhanced Raman scattering (SERS) spectroscopy, and the most probable conformation of the molecule when adsorbed on the Au nanoparticles surface is suggested on the basis of theoretical calculations. In addition, we analyze the host–guest interactions of the AP[5]A with 2‐naphthoic acid (2NA) by using ¹H NMR spectroscopy and the results are compared with theoretical calculations. Finally, the promising synergetic effects of combining supramolecular chemistry and metal nanoparticles are demonstrated through SERS detection in water of 2NA and a polycyclic aromatic hydrocarbon, pyrene (PYR).     

Functional delivery vehicle of organic nanoparticles in inorganic crystals

This work has developed a functional delivery vehicle of an organic-inorganic hybrid consisted of organic nanoparticles in inorganic crystals, which greatly improves the stability of the bioactive and implements a unique pH-triggered release.     

Chitosan-mediated and spatially selective electrodeposition of nanoscale particles

Nanoscale particles offer a variety of interesting properties, and there is growing interest in their assembly into higher ordered structures. We report that the pH-responsive aminopolysaccharide chitosan can mediate the electrodeposition of model nanoparticles. Chitosan is known to electrodeposit at the cathode surface in response to a high localized pH. To demonstrate that chitosan can mediate nanoparticle deposition, we suspended fluorescently labeled latex nanoparticles (100 nm diameter spheres) in a chitosan solution (1%) and performed electrodeposition (0.05 mA/cm2 for several minutes). Results demonstrate that chitosan is required for nanoparticle electrodeposition; chitosan confers spatial selectivity to electrodeposition; and nanoparticles distribute throughout the electrodeposited chitosan film. Additionally, we observed that the deposited films reversibly swell upon rehydration. This work indicates that chitosan provides a simple means to assemble nanoparticles at addressable locations and provides further evidence that stimuli-responsive biological materials may facilitate fabrication at the microscale.     

Enhanced plasmon resonance light scattering signals of colloidal gold resulted from its interactions with organic small molecules using captopril as an example

Gold nanoparticles are known for their plasmon resonance absorption (PRA) depending on their size. Our this investigation shows that plasma resonance light scattering (PRLS) signals in the corresponding PRA region could be measured using a common spectrofluorometer, and be enhanced when aggregation of gold nanoparticles occurs due to their interaction with organic small molecules (OSMs). Using captopril (Cap) as an example, we investigated the interactions of gold nanoparticles with OSMs in order to propose a general method of OSMs such as typical clinic organic drugs. In aqueous medium of pH 2.09, there are about 2.2 × 10³ Cap molecules covalently binding to the surface of a 10-nm diameter gold nanoparticle through the thiol functional group of Cap, and thus forms a core-shell assembly of [(Au)₃₁₀₀₀]@[(Cap)₂₂₀₀], displaying strong enhanced PRLS signals in the PRA region of gold colloid. The PRLS intensities characterized at 553.0 nm were found to be proportional to the concentration of Cap over the range of 0.1-1.7 mg L⁻¹ with the determination limit (3σ) of 32.0 μg L⁻¹. With that, Cap in pharmaceutical preparations could be determined with the recovery of 97.0-104.5% and R.S.D. of less than 2.4%.     

Optimizing the Size of Platinum Nanoparticles for Enhanced Mass Activity in the Electrochemical Oxygen Reduction Reaction

High oxygen reduction (ORR) activity has been for many years considered as the key to many energy applications. Herein, by combining theory and experiment we prepare Pt nanoparticles with optimal size for the efficient ORR in proton‐exchange‐membrane fuel cells. Optimal nanoparticle sizes are predicted near 1, 2, and 3 nm by computational screening. To corroborate our computational results, we have addressed the challenge of approximately 1 nm sized Pt nanoparticle synthesis with a metal–organic framework (MOF) template approach. The electrocatalyst was characterized by HR‐TEM, XPS, and its ORR activity was measured using a rotating disk electrode setup. The observed mass activities (0.87±0.14 A mg_Pt^?1) are close to the computational prediction (0.99 A mg_Pt^?1). We report the highest to date mass activity among pure Pt catalysts for the ORR within similar size range. The specific and mass activities are twice as high as the Tanaka commercial Pt/C catalysis.     

Influence of the preparation conditions of Pd‐ZrO2 and AuPd‐ZrO2 nanoparticle–decorated functionalised MWCNTs: Electron spectroscopy study aided with the QUASES

The Pd, AuPd, and ZrO₂ nanoparticle–decorated functionalised multiwalled carbon nanotubes (f‐MWCNTs) were reported as efficient catalysts of formic acid (FA) electro‐oxidation. Different preparation conditions influence their chemical and structural properties analysed by X‐ray photoelectron spectroscopy aided with the quantitative analysis of surfaces by electron spectroscopy. Different reduction procedures such as NaBH₄, a polyol microwave‐assisted method (PMWA), and a high pressure microwave reactor (HPMWR) were applied for decorating ZrO₂/f‐MWCNTs with Pd and AuPd nanoparticles. The ZrO₂ nanoparticles are attached through oxygen groups to the surface of f‐MWCNTs. In NaBH₄ and HPMWR procedures, Pd nanoparticles precipitate predominantly on ZrO₂ of nearly nominal stoichiometry, whereas in PMWA procedure, Pd and AuPd nanoparticles precipitate predominantly on the surface of f‐MWCNTs, bridging with oxygen groups and ZrO_x (x < 2) and leading to Pd‐O‐Zr phase formation. Strong reducing procedures (NaBH₄ and FA) led to smaller Pd nanoparticle size, Pd oxide content, and PdO_x overlayer thickness in contrary to weak reduction procedures (HPMWR and PMWA). The highest content of Pd‐O‐Zr phase appeared for Pd predominant precipitation on ZrO₂ nanoparticles (HPMWR) in contrary to Pd and AuPd predominant precipitation on surface of f‐MWCNTs (NaBH₄ ~ FA > PMWA). Larger content of Pd‐O‐Zr phase in AuPd‐decorated ZrO₂/f‐MWCNTs in contrary to Pd‐decorated sample (PMWA) could be justified by different electronic properties of nanoparticles. The FA treatment of Pd and AuPd‐ZrO₂/f‐MWCNTs samples provided decreasing Pd oxide content, overlayer thickness, nanoparticle size, increasing nanoparticle surface coverage and density, amount of Pd‐O‐Zr, what results from reduction of oxygen groups bridging with Pd and ZrO_x nanoparticles, also through Pd‐O‐Zr phase.     

Selective Synthesis of Silver Nanoparticles onto Potassium Hexaniobate: Structural Organisation with Bactericidal Properties

Silver‐based nanocomposites are known to act as biocides against a series of microorganisms and are largely studied as an alternative to substitute conventional antibiotics that show decreasing efficacy. In this work, an eco‐friendly method to synthesize silver nanoparticles assembled on the surface of hexaniobate crystals is reported. By means of ion exchange, K⁺ ions of layered potassium hexaniobate were partially substituted by Ag⁺ ions and the resulting material was exposed to UV light. The irradiation allowed the reduction of silver ions with consequent formation of silver nanoparticles located only on the hexaniobate surface, whereas Ag⁺ ions located in the interlayer space remained in the ionic form. Increasing UV‐light exposure times allowed controlling of the silver nanoparticle size. The antibacterial effects of the pristine potassium hexaniobate and of silver‐containing hexaniobate samples were tested against Escherichia coli (E. coli). The antibacterial efficacy was determined to be related to the presence of silver in hexaniobate. An increasing activity against E. coli was observed with the decrease in silver nanoparticles size, suggesting that silver nanoparticles of distinct sizes interact differently with bacterial cell walls.