Axial Ligand and Spin‐State Influence on the Formation and Reactivity of Hydroperoxo–Iron(III) Porphyrin Complexes

The present study focuses on the formation and reactivity of hydroperoxo–iron(III) porphyrin complexes formed in the [Fe^III(tpfpp)X]/H₂O₂/HOO^? system (TPFPP=5,10,15,20‐tetrakis(pentafluorophenyl)‐21H,23H‐porphyrin; X=Cl^? or CF₃SO₃^?) in acetonitrile under basic conditions at ?15 °C. Depending on the selected reaction conditions and the active form of the catalyst, the formation of high‐spin [Fe^III(tpfpp)(OOH)] and low‐spin [Fe^III(tpfpp)(OH)(OOH)] could be observed with the application of a low‐temperature rapid‐scan UV/Vis spectroscopic technique. Axial ligation and the spin state of the iron(III) center control the mode of O? O bond cleavage in the corresponding hydroperoxo porphyrin species. A mechanistic changeover from homo‐ to heterolytic O? O bond cleavage is observed for high‐ [Fe^III(tpfpp)(OOH)] and low‐spin [Fe^III(tpfpp)(OH)(OOH)] complexes, respectively. In contrast to other iron(III) hydroperoxo complexes with electron‐rich porphyrin ligands, electron‐deficient [Fe^III(tpfpp)(OH)(OOH)] was stable under relatively mild conditions and could therefore be investigated directly in the oxygenation reactions of selected organic substrates. The very low reactivity of [Fe^III(tpfpp)(OH)(OOH)] towards organic substrates implied that the ferric hydroperoxo intermediate must be a very sluggish oxidant compared with the iron(IV)–oxo porphyrin π‐cation radical intermediate in the catalytic oxygenation reactions of cytochrome P450.     

Mechanistic Insight into Peroxo‐Shunt Formation of Biomimetic Models for Compound II,Their Reactivity toward Organic Substrates,and the Influence of N‐Methylimidazole Axial Ligation

High‐valent iron‐oxo species have been invoked as reactive intermediates in catalytic cycles of heme and nonheme enzymes. The studies presented herein are devoted to the formation of compound II model complexes, with the application of a water soluble (TMPS)Fe^III(OH) porphyrin ([meso‐tetrakis(2,4,6‐trimethyl‐3‐sulfonatophenyl)porphinato]iron(III) hydroxide) and hydrogen peroxide as oxidant, and their reactivity toward selected organic substrates. The kinetics of the reaction of H₂O₂ with (TMPS)Fe^III(OH) was studied as a function of temperature and pressure. The negative values of the activation entropy and activation volume for the formation of (TMPS)Fe^IV?O(OH) point to the overall associative nature of the process. A pH‐dependence study on the formation of (TMPS)Fe^IV?O(OH) revealed a very high reactivity of OOH^? toward (TMPS)Fe^III(OH) in comparison to H₂O₂. The influence of N‐methylimidazole (N‐MeIm) ligation on both the formation of iron(IV)‐oxo species and their oxidising properties in the reactions with 4‐methoxybenzyl alcohol or 4‐methoxybenzaldehyde, was investigated in detail. Combined experimental and theoretical studies revealed that among the studied complexes, (TMPS)Fe^III(H₂O)(N‐MeIm) is highly reactive toward H₂O₂ to form the iron(IV)‐oxo species, (TMPS)Fe^IV?O(N‐MeIm). The latter species can also be formed in the reaction of (TMPS)Fe^III(N‐MeIm)₂ with H₂O₂ or in the direct reaction of (TMPS)Fe^IV?O(OH) with N‐MeIm. Interestingly, the kinetic studies involving substrate oxidation by (TMPS)Fe^IV?O(OH) and (TMPS)Fe^IV?O(N‐MeIm) do not display a pronounced effect of the N‐MeIm axial ligand on the reactivity of the compound II mimic in comparison to the OH^? substituted analogue. Similarly, DFT computations revealed that the presence of an axial ligand (OH^? or N‐MeIm) in the trans position to the oxo group in the iron(IV)‐oxo species does not significantly affect the activation barriers calculated for C?H dehydrogenation of the selected organic substrates.     

New Mechanistic Aspects of the Fenton Reaction

The kinetics of the Fenton reaction was studied in detail. A second reaction step in the presence of excess H₂O₂ is attributed to formation of the complex Fe^III(^?O₂H)_aq. Therefore, the reaction of Fe(H₂O)₆²⁺ with Fe^III(^?O₂H)_aq in the presence of Fe^II to form Fe^III_aq (k=(7.7±1.5)×10⁵ M ^?1 s^?1) may contribute to the overall Fenton reaction, and could account for some of the debate in the literature concerning its detailed mechanism. If this is correct for LFe^III(^?O₂H)_aq also, then it might be of significant biological importance. The activation parameters ΔH^≠, ΔS^≠, and ΔV^≠ for the Fenton reaction were measured under various experimental conditions, and are used in the mechanistic interpretation.     

Dendritic Iron Porphyrins with a Tethered Axial Ligand as New Model Compounds for Heme Monooxygenases

The novel iron(III) porphyrin dendrimers of generation zero ([ 1 ⋅Fe^III]Cl), one ([ 2 ⋅Fe^III]Cl), and two ([ 3 ⋅Fe^III]Cl) (Fig. 1) were prepared (Schemes 1 and 3) as models of heme monooxygenases. They feature controlled axial ligation at the Fe center by one imidazole tethered to the porphyrin core and possess a vacant coordination site available for ligand binding and catalysis. The high purity of the dendrimers and the absence of structural defects was demonstrated by matrix‐assisted laser‐desorption‐ionization time‐of‐flight (MALDI‐TOF) mass spectrometry (Fig. 3). The electronic properties of the Fe^III porphyrin dendrimers and comparison compounds [ 4 ⋅Fe^III]Cl and [ 12 ⋅Fe^III(1,2‐Me₂Im)]Cl (1,2‐Me₂Im=1,2‐dimethylimidazole) were investigated by UV/VIS and EPR (electronic paramagnetic resonance) spectroscopy, as well as by measurements of the magnetic moments by the Evans‐Scheffold method. Epoxidation of olefins and oxidation of sulfides to sulfoxides, catalyzed by the new dendritic metalloporphyrins, were investigated in CH₂Cl₂ with iodosylbenzene as the oxidant (Tables 1 and 2). The total turnover numbers were found to increase with the size of the dendrimer, due to improved catalyst stability at higher dendritic generations (Figs. 4 and 5). The second‐generation complex [ 3 ⋅Fe^III]Cl was, therefore, the most efficient catalyst in the series, despite the fact that its active site is considerably hindered by the encapsulation inside the sterically demanding, fluctuating dendritic wedges. Very high product selectivities were observed in all oxidation reactions, regardless of dendrimer generation.     

High Sensitive Microsensor Based on Organic‐Inorganic Composite for Two‐Dimensional Mapping of H2O2 by SECM

The present work describes the development of a selective, sensitive and stable sensing microsensor for scanning electrochemical microscopy (SECM) to measure H₂O₂ during electrochemical reduction of oxygen. The microsensor is based on graphene and Poly(3,4‐ethylenedioxythiophene) composite as support to iron (III) hexacyanoferrate (II) (PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor). The electrochemical properties of the PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor were investigated by cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). The PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor showed an excellent electrocatalytic activity toward hydrogen peroxide (H₂O₂) reduction with a diminution of the overpotential of about 500 mV in comparison to the process at a bare gold microelectrode. The microsensor presented excellent performance for two dimensional mapping of H₂O₂ by SECM in 0.1 mol L^?1 phosphate buffer solution (pH 7.0). Under optimized conditions, a linear response range from 1 up to 1000 µmol L^?1 was obtained with a sensitivity of 0.08 nA L µmol^?1 and limit of detection of 0.5 µmol L^?1.     

A Structural and Functional Model for the Tris-Histidine Motif in Cysteine Dioxygenase

The iron(II) complexes [Fe(L)(MeCN)₃](SO₃CF₃)₂ (L are two derivatives of tris(2-pyridyl)-based ligands) have been synthesized as models for cysteine dioxygenase (CDO). The molecular structure of one of the complexes exhibits octahedral coordination geometry and the Fe−N_py bond lengths [1.953(4)–1.972(4) Å] are similar to those in the Cys-bound Fe^II-CDO; Fe−N_His: 1.893–2.199 Å. The iron(II) centers of the model complexes exhibit relatively high Fe^III/II redox potentials (E_1/2=0.988–1.380 V vs. ferrocene/ferrocenium electrode, Fc/Fc⁺), within the range for O₂ activation and typical for the corresponding nonheme iron enzymes. The reaction of in situ generated [Fe(L)(MeCN)(SPh)]⁺ with excess O₂ in acetonitrile (MeCN) yields selectively the doubly oxygenated phenylsulfinic acid product. Isotopic labeling studies using ¹⁸O₂ confirm the incorporation of both oxygen atoms of O₂ into the product. Kinetic and preliminary DFT studies reveal the involvement of an Fe^III peroxido intermediate with a rhombic S= Fe^III center (687–696 nm; g≈2.46–2.48, 2.13–2.15, 1.92–1.94), similar to the spectroscopic signature of the low-spin Cys-bound Fe^IIICDO (650 nm, g≈2.47, 2.29, 1.90). The proposed Fe^III peroxido intermediates have been trapped, and the O−O stretching frequencies are in the expected range (approximately 920 and 820 cm⁻¹ for the alkyl- and hydroperoxido species, respectively). The model complexes have a structure similar to that of the enzyme and structural aspects as well as the reactivity are discussed.     

Unusual Stabilization of an Intermediate Spin State of Iron upon the Axial Phenoxide Coordination of a Diiron(III)–Bisporphyrin: Effect of Heme–Heme Interactions

The binding of a series of substituted phenols as axial ligands onto a diiron(III)? bisporphyrin framework have been investigated. Spectroscopic characterization revealed high‐spin states of the iron centers in all of the phenolate complexes, with one exception in the 2,4,6‐trinitrophenolate complex of diiron(III)? bisporphyrin, which only stabilized the pure intermediate‐spin (S=3/2) state of the iron centers. The average Fe? N (porphyrin) and Fe? O (phenol) distances that were observed with the 2,4,6‐trinitrophenolate complex were 1.972(3) Å and 2.000(2) Å, respectively, which are the shortest and longest distances reported so far for any Fe^III? porphyrin with phenoxide coordination. The alternating shift pattern, which shows opposite signs of the chemical shifts for the meta versus ortho/para protons, is attributed to negative and positive spin densities on the phenolate carbon atoms, respectively, and is indicative of π‐spin delocalization onto the bound phenolate. Electrochemical data reveals that the E_1/2 value for the Fe^III/Fe^II couple is positively shifted with increasing acidity of the phenol. However, a plot of the E_1/2 values for the Fe^III/Fe^II couple versus the pK_a values of the phenols shows a linear relationship for all of the complexes, except for the 2,4,6‐trinitrophenolate complex. The large deviation from linearity is probably due to the change of spin for the complex. Although 2,4,6‐trinitrophenol is the weakest axial ligand in the series, its similar binding with the corresponding Fe^III? monoporphyrin only results in stabilization of the high‐spin state. The porphyrin macrocycle in the 2,4,6‐trinitrophenolate complex of diiron(III)? bisporphyrin is the most distorted, whilst the “ruffling” deformation affects the energy levels of the iron d orbitals. The larger size and weaker binding of 2,4,6‐trinitrophenol, along with heme? heme interactions in the diiron(III)? bisporphyrin, are responsible for the larger ring deformations and eventual stabilization of the pure intermediate‐spin states of the iron centers in the complex.     

Chemoselective Hydrogenation of Nitroaromatics at the Nanoscale Iron(III)–OH–Platinum Interface

Catalytic hydrogenation of nitroaromatics is an environment‐benign strategy to produce industrially important aniline intermediates. Herein, we report that Fe(OH)_x deposition on Pt nanocrystals to give Fe(OH)_x/Pt, enables the selective hydrogenation of nitro groups into amino groups without hydrogenating other functional groups on the aromatic ring. The unique catalytic behavior is identified to be associated with the Fe^III‐OH‐Pt interfaces. While H₂ activation occurs on exposed Pt atoms to ensure the high activity, the high selectivity towards the production of substituted aniline originates from the Fe^III‐OH‐Pt interfaces. In situ IR, X‐ray photoelectron spectroscopy (XPS), and isotope effect studies reveal that the Fe³⁺/Fe²⁺ redox couple facilitates the hydrodeoxygenation of the ‐NO₂ group during hydrogenation catalysis. Benefitting from Fe^III‐OH‐Pt interfaces, the Fe(OH)_x/Pt catalysts exhibit high catalytic performance towards a broad range of substituted nitroarenes.     

Chemoselective Hydrogenation of Nitroaromatics at the Nanoscale Iron(III)–OH–Platinum Interface

Catalytic hydrogenation of nitroaromatics is an environment-benign strategy to produce industrially important aniline intermediates. Herein, we report that Fe(OH)_x deposition on Pt nanocrystals to give Fe(OH)_x/Pt, enables the selective hydrogenation of nitro groups into amino groups without hydrogenating other functional groups on the aromatic ring. The unique catalytic behavior is identified to be associated with the Fe^III-OH-Pt interfaces. While H₂ activation occurs on exposed Pt atoms to ensure the high activity, the high selectivity towards the production of substituted aniline originates from the Fe^III-OH-Pt interfaces. In situ IR, X-ray photoelectron spectroscopy (XPS), and isotope effect studies reveal that the Fe³⁺/Fe²⁺ redox couple facilitates the hydrodeoxygenation of the -NO₂ group during hydrogenation catalysis. Benefitting from Fe^III-OH-Pt interfaces, the Fe(OH)_x/Pt catalysts exhibit high catalytic performance towards a broad range of substituted nitroarenes.     

A Tale of Two Complexes: Electro-Assisted Oxidation of Thioanisole by an “O2 Activator/Oxidizing Species” Tandem System of Non-Heme Iron Complexes

We report two new Fe^III complexes [L¹Fe^III(H₂O)](OTf)₂ and [L²Fe^III(OTf)] , obtained by replacing pyridines by phenolates in a known non-heme aminopyridine iron complex. While the original, starting aminopyridine [(L₅ ² )Fe^II(MeCN)](PF₆) complex is stable in air, the potentials of the new Fe^III/II couples decrease to the point that [L²Fe^II] spontaneously reduces O₂ to superoxide. We used it as an O₂ activator in an electrochemical setup, as its presence allows to generate superoxide at a much more accessible potential (>500 mV gain). Our aim was to achieve substrate oxidation via the reductive activation of O₂. While L²Fe^III(OTf) proved to be a good O₂ activator but a poor oxidation system, its association with another complex (TPEN)Fe^II(PF₆)₂ generates a complementary tandem couple for electro-assisted oxidation of substrates, working at a very accessible potential: upon reduction, L²Fe^III(OTf) activates O₂ to superoxide and transfers it to (TPEN)Fe^II(PF₆)₂ leading in fine to the oxidation of thioanisole.     

Binding of Multivalent Anionic Porphyrins to V3 Loop Fragments of an HIV‐1 Envelope and Their Antiviral Activity

Interactions of multivalent anionic porphyrins and their iron(III) complexes with cationic peptides, V3_Ba‐L and V3_IIIB, which correspond to those of the V3 loop regions of the gp120 envelope proteins of the HIV‐1_Ba‐L and HIV‐1_IIIB strains, respectively, are studied by UV/Vis, circular dichroism, ¹H NMR, and EPR spectroscopy, a microcalorimetric titration method, and anti‐HIV assays. Tetrakis(3,5‐dicarboxylatophenyl)porphyrin (P1), tetrakis[4‐(3,5‐dicarboxylatophenylmethoxy)phenyl]porphyrin (P2), and their ferric complexes (Fe^IIIP1 and Fe^IIIP2) were used as the multivalent anionic porphyrins. P1 and Fe^IIIP1 formed stable complexes with both V3 peptides (binding constant K>10⁶ M ^?1) through combined electrostatic and van der Waals interactions. Coordination of the His residues in V3_Ba‐L to the iron center of Fe^IIIP1 also played an important role in the complex stabilization. As P2 and Fe^IIIP2 form self‐aggregates in aqueous solution even at low concentrations, detailed analysis of their interactions with the V3 peptides could not be performed. To ascertain whether the results obtained in the model system are applicable to a real biological system, anti‐HIV‐1_BA‐L and HIV‐1_IIIB activity of the porphyrins is examined by multiple nuclear activation of a galactosidase indicator (MAGI) and 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assays. There is little correlation between chemical analysis and actual anti‐HIV activity, and the size rather than the number of the anionic groups of the porphyrin is important for anti‐HIV activity. All the porphyrins show high selectivity, low cytotoxicity, and high viral activity. Fe^IIIP1 and Fe^IIIP2 are used for the pharmacokinetic study. Half‐lives of these iron porphyrins in serum of male Wistar rats are around 4 to 6 h owing to strong interaction of these porphyrins with serum albumin.     

Electrochemical study of a nonheme Fe(ii) complex in the presence of dioxygen. Insights into the reductive activation of O2 at Fe(ii) centers

Recent efforts to model the reactivity of iron oxygenases have led to the generation of nonheme Fe^III(OOH) and Fe^IV(O) intermediates from Fe^II complexes and O₂ but using different cofactors. This diversity emphasizes the rich chemistry of nonheme Fe(ii) complexes with dioxygen. We report an original mechanistic study of the reaction of [(TPEN)Fe^II]²⁺ with O₂ carried out by cyclic voltammetry. From this Fe^II precursor, reaction intermediates such as [(TPEN)Fe^IV(O)]²⁺, [(TPEN)Fe^III(OOH)]²⁺ and [(TPEN)Fe^III(OO)]⁺ have been chemically generated in high yield, and characterized electrochemically. These electrochemical data have been used to analyse and perform simulation of the cyclic voltammograms of [(TPEN)Fe^II]²⁺ in the presence of O₂. Thus, several important mechanistic informations on this reaction have been obtained. An unfavourable chemical equilibrium between O₂ and the Fe^II complex occurs that leads to the Fe^III-peroxo complex upon reduction, similarly to heme enzymes such as P450. However, unlike in heme systems, further reduction of this latter intermediate does not result in O–O bond cleavage.     

Modeling Heme Peroxidase: Heme Saddling Facilitates Reactions with Hyperperoxides To Form High-Valent FeIV-Oxo Species

Saddle-shaped hemes have been discovered in the structures of most peroxidases. How such a macrocycle deformation affects the reaction of Fe^III hemes with hydrogen peroxide (H₂O₂) to form high-valent Fe-oxo species remains uncertain. Through examination of the ESI-MS spectra, absorption changes and ¹H NMR chemical shifts, we investigated the reactions of two Fe^III porphyrins with different degrees of saddling deformation, namely Fe^III(OETPP)ClO₄ ( 1^OE ) and Fe^III(OMTPP)ClO₄ ( 1^OM ), with tert-butyl hydroperoxide (tBuOOH) in CH₂Cl₂ at −40 °C, which quickly resulted in O−O bond homolysis from a highly unstable Fe^III-alkylperoxo intermediate, Fe^III-O(H)OR ( 2 ) into Fe^IV-oxo porphyrins ( 3 ). Insight into the reaction mechanism was obtained from [tBuOOH]-dependent kinetics. At −40 °C, the reaction of 1^OE with tBuOOH exhibited an equilibrium constant (K_a=362.3 M⁻¹) and rate constant (k=1.87×10⁻² s^M−>1) for the homolytic cleavage of the 2 O−O bond that were 2.1 and 1.4 times higher, respectively, than those exhibited by 1^OM (K_a=171.8 M⁻¹ and k=1.36×10⁻² s⁻¹). DFT calculations indicated that an Fe^III porphyrin with greater saddling deformation can achieve a higher HOMO ([Fe(d ,d )-porphyrin(a_2u)]) to strengthen the orbital interaction with the LUMO (O−O bond σ*) to facilitate O−O cleavage.     

From the {FeIII2Ln2} Butterfly's Perspective: the Magnetic Benefits and Challenges of Cooperativity within 3 d–4 f Based Coordination Clusters

In this Review we discuss the tuning handles which can be used to steer the magnetic properties of Fe^III-4 f “butterfly” compounds. The majority of presented compounds were produced in the context of project A3 “Di- to tetranuclear compounds incorporating highly anisotropic paramagnetic metal ions” within the SFB/TRR88 “3MET”. These contain {Fe^III₂Ln₂} cores encapsulated in ligand shells which are easy to tune in a “test-bed” system. We identify the following advantages and variables in such systems: (i) the complexes are structurally simple usually with one crystallographically independent Fe^III and Ln^III, respectively. This simplifies theory and anaylsis; (ii) choosing Fe allows ⁵⁷Fe Mössbauer spectroscopy to be used as an additional technique which can give information about oxidation levels and spin states, local moments at the iron nuclei and spin-relaxation and, more importantly, about the anisotropy not only of the studied isotope, but also of elements interacting with this isotope; (iii) isostructural analogues with all the available (i. e. not Pm) 4 f ions can be synthesised, enabling a systematic survey of the influence of the 4 f ion on the electronic structure; (iv) this cluster type is obtained by reacting [Fe^III₃O(O₂CR)₆(L)₃](X) (X=anion, L=solvent such as H₂O, py) with an ethanolamine-based ligand L′ and lanthanide salts. This allows to study analogues of [Fe^III₂Ln₂(μ₃-OH)₂(L′)₂(O₂CR)₆] using the appropriate iron trinuclear starting materials. (v) the organic main ligand can be readily functionalised, facilitating a systematic investigation of the effect of organic substituents on the ligands on the magnetic properties of the complexes. We describe and discuss 34 {M^III₂Ln₂} (M=Fe or in one case Al) butterfly compounds which have been reported up to 2020. The analysis of these gives perspectives for designing new SMM systems with specific electronic and magnetic signatures     

Fe6.67(PO4)5.35(HPO4)0.65 and Fe6.23(PO4)4.45(HPO4)1.55: two new mixed‐valence iron phosphates

Two new mixed‐valence iron phosphates, namely heptairon pentaphosphate hydrogen phosphate, Fe_6.67(PO₄)_5.35(HPO₄)_0.65, and heptairon tetraphosphate bis(hydrogen phosphate), Fe_6.23(PO₄)_4.45(HPO₄)_1.55, have been synthesized hydrothermally at 973 K and 0.1 GPa. The structures are similar to that of Fe^II₃Fe^III₄(PO₄)₆ and are characterized by infinite chains of Fe polyhedra parallel to the [101] direction. These chains are formed by the Fe1O₆ and Fe2O₆ octahedra, alternating with the Fe4O₅ distorted pentagonal bipyramids, according to the stacking sequence ...Fe1–Fe1–Fe4–Fe2–Fe2.... The Fe3O₆ octahedra and PO₄ tetrahedra connect the chains together. Fe^II is localized on the Fe3 and Fe4 sites, whereas Fe^III is found in the Fe1 and Fe2 sites, according to bond‐valence calculations. Refined site occupancies indicate the presence of vacancies on the Fe4 site, explained by the substitution mechanism Fe^II + 2(PO₄³⁻) = vacancies + 2(HPO₄²⁻).     

Highly Efficient FeIII-initiated Self-cycled Fenton System in Piezo-catalytic Process for Organic Pollutants Degradation

Piezo-catalytic self-Fenton (PSF) system has been emerging as a promising technique for wastewater treatment, while the competing O₂ reductive hydrogen peroxide (H₂O₂) production and Fe^III reduction seriously limited the reaction kinetics. Here, we develop a two-electron water oxidative H₂O₂ production (WOR−H₂O₂) coupled with Fe^III reduction over a Fe^III/BiOIO₃ piezo-catalyst for highly efficient PSF. It is found that the presence of Fe^III can simultaneously initiate the WOR−H₂O₂ and reduction of Fe^III to Fe^II, thereby enabling a rapid reaction kinetics towards subsequent Fenton reaction of H₂O₂/Fe^II. The Fe^III initiating PSF system offers exceptional self-recyclable degradation of pollutants with a degradation rate constant for sulfamethoxazole (SMZ) over 3.5 times as that of the classic Fe^II-PSF system. This study offers a new perspective for constructing efficient PSF systems and shatters the preconceived notion of Fe^III in the Fenton reaction.     

Synthesis of Dendritic Metalloporphyrins with Distal H‐Bond Donors as Model Systems for Hemoglobin

We report the synthesis of the first‐ (G1) and second‐generation (G2) dendritic Fe^II porphyrins 1?Fe – 4?Fe (G1) and 6?Fe (G2) bearing distal H‐bond donors ideally positioned for stabilization of Fe^II? O₂ adducts by H‐bonding (Fig. 1). A first approach towards the construction of these novel biomimetic systems failed unexpectedly: the Suzuki cross‐coupling between appropriately functionalized Zn^II porphyrins and ortho‐ethynylated aryl derivatives, serving as anchors for the distal H‐bond donor moieties, was unsuccessful (Schemes 1, 3, and 5), presumably due to steric hindrance resulting from unfavorable coordination of the ethynyl residue to the Pd species in the catalytic cycle (Scheme 6). The target molecules were finally prepared by a route in which the ortho‐ethynylated meso‐aryl ring is introduced during porphyrin construction in a mixed condensation involving the two dipyrrylmethanes 33 and 34 , and aldehyde 36 (Schemes 7 and 8). Following attachment of the dendrons (Scheme 11), the distal H‐bond donors were introduced by Sonogashira cross‐coupling (Scheme 12), and subsequent metallation afforded the dendritic Fe^II porphyrins 1?Fe – 6?Fe . ¹H‐NMR Spectroscopy proved the location of the H‐bond donor moiety atop the porphyrin surface, and X‐ray crystal‐structure analysis of model system 45 (Fig. 2) revealed that this moiety would not sterically interfere with gas binding. With 1,2‐dimethyl‐1H‐imidazole (DiMeIm) as ligand, the dendritic Fe^II porphyrins formed five‐coordinate high‐spin complexes (Figs. 3 and 4) and addition of CO led reversibly to the corresponding stable six‐coordinate gas complexes (Fig. 6). Oxygenation, however, did not result in defined Fe^II? O₂ complexes as rapid decomposition to Fe^III species took place immediately, even in the case of the G2 dendrimer 6?Fe (DiMeIm) (Fig. 7). In contrast, stable gas adducts are formed between dendritic Co^II porphyrins and O₂ in the presence of DiMeIm as axial ligand, as revealed by electron paramagnetic resonance (EPR). The possible stabilization of these complexes through H‐bonding involving the distal ligand is currently under investigation in multidimensional and multifrequency pulse EPR experiments.     

Hydroxylation of Aromatics by H2O2 Catalyzed by Mononuclear Non-heme Iron Complexes: Role of Triazole Hemilability in Substrate-Induced Bifurcation of the H2O2 Activation Mechanism

Rieske dioxygenases are metalloenzymes capable of achieving cis-dihydroxylation of aromatics under mild conditions using O₂ and a source of electrons. The intermediate responsible for this reactivity is proposed to be a cis-Fe^V(O)(OH) moiety. Molecular models allow the generation of a Fe^III(OOH) species with H₂O₂, to yield a Fe^V(O)(OH) species with tetradentate ligands, or {Fe^IV(O); OH^.} pairs with pentadentate ones. We have designed a new pentadentate ligand, mtL₄², bearing a labile triazole, to generate an “in-between” situation. Two iron complexes, [(mtL₄²)FeCl](PF₆) and [(mtL₄²)Fe(OTf)₂]), were obtained and their reactivity towards aromatic substrates was studied in the presence of H₂O₂. Spectroscopic and kinetic studies reflect that triazole is bound at the Fe^II state, but decoordinates in the Fe^III(OOH). The resulting [(mtL₄²)Fe^III(OOH)(MeCN)]²⁺ then lies on a bifurcated decay pathway (end-on homolytic vs. side-on heterolytic) depending on the addition of aromatic substrate: in the absence of substrate, it is proposed to follow a side-on pathway leading to a putative (N₄)Fe^V(O)(OH), while in the presence of aromatics it switches to an end-on homolytic pathway yielding a {(N₅)Fe^IV(O); OH^.} reactive species, through recoordination of triazole. This switch significantly impacts the reaction regioselectivity.     

Mössbauer Spectroscopic Investigation of FeII and FeIII 3,4,5‐Trihydroxybenzoates (Gallates) – Proposed Model Compounds for Iron‐Gall Inks

Iron gallates with iron in the oxidation states Fe²⁺ and Fe³⁺ were prepared and studied by Mössbauer spectroscopy, X‐ray diffraction, and IR spectroscopy. Fe^III 3,4,5‐trihydroxybenzoate (gallate) Fe(C₇O₅H₄) · 2H₂O, whose structure was first determined by Wunderlich, was obtained by the reaction of gallic acid and metallic iron or by oxidation of the Fe^II gallate, which was obtained by the reaction of ferrous sulfate with 3,4,5‐trihydroxybezoic acid (gallic acid) under anoxic conditions. Trials to reproduce the hydrothermal preparation method of Feller and Cheetham show that the result depends crucially on the free gas volume in the reaction vessel. If there is no free volume one obtains the same Fe^III gallate as in the other preparation methods. With a large free volume another compound was found to form whose composition and structure could not be determined. It could be specified only by Mössbauer spectroscopy. Fe^III gallate, the Fe^II gallate, and the new phase show magnetic ordering at liquid helium temperature.