Temperature-Dependent Photoluminescence of Hexafluorobenzene-Intercalated Phenethylammonium Tin Iodide 2D Perovskite

Tin halide perovskites are potential alternatives of lead halide perovskites. However, the easy oxidation of Sn²⁺ to Sn⁴⁺ brings in a challenge. Recently, layered two-dimensional hybrid tin halide perovskites have been shown to partially resist the oxidation process because of the presence of hydrophobic organic molecules. Consequently, such layered hybrid perovskites are being explored for optoelectronic applications. The optical properties of layered tin halide perovskites depend on the interlayer separation and the dielectric mismatch between the organic and inorganic layers. Intercalation (insertion) of a molecular species between the layers modifies the interlayer interactions affecting the optical properties of layered hybrid perovskites. We investigated the effect of hexafluorobenzene (HFB) intercalation in phenethylammonium tin iodide [(PEA)₂SnI₄] using temperature-dependent (6 K to 300 K) photoluminescence (PL). HFB intercalation increases the bandgap. A strong PL quenching is observed in pristine (PEA)₂SnI₄ below 150 K, probably because of the presence of non-emissive states. HFB intercalation suppresses the influence of such non-emissive states resulting in an increase in PL intensity at the cryogenic temperatures. Our results highlight that a simple molecular intercalation (non-covalent interaction) into layered hybrid perovskites can significantly tailor the electronic and optical properties.     

A Two‐Dimensional Ruddlesden–Popper Perovskite Nanowire Laser Array based on Ultrafast Light‐Harvesting Quantum Wells

Miniaturized nanowire nanolasers of 3D perovskites feature a high gain coefficient; however, room-temperature optical gain and nanowire lasers from 2D layered perovskites have not been reported to date. A biomimetic approach is presented to construct an artificial ligh-harvesting system in mixed multiple quantum wells (QWs) of 2D-RPPs of (BA)₂(FA)_n−1Pb_nBr_3n+1, achieving room-temperature ASE and nanowire (NW) lasing. Owing to the improvement of flexible and deformable characteristics provided by organic BA cation layers, high-density large-area NW laser arrays were fabricated with high photostability. Well-controlled dimensions and uniform geometries enabled 2D-RPPs NWs functioning as high-quality Fabry–Perot (FP) lasers with almost identical optical modes, high quality (Q) factor (ca. 1800), and similarly low lasing thresholds.     

A two‐dimensional organic–inorganic hybrid perovskite‐type semiconductor: poly[(2‐azaniumylethyl)trimethylphosphanium [tetra‐μ‐bromido‐plumbate(II)]]

Recently, with the prevalence of `perovskite fever', organic–inorganic hybrid perovskites (OHPs) have attracted intense attention due to their remarkable structural variability and highly tunable properties. In particular, the optical and electrical properties of organic–inorganic hybrid lead halides are typical of the OHP family. Besides, although three‐dimensional hybrid perovskites, such as [CH₃NH₃]PbX₃ (X = Cl, Br or I), have been reported, the development of new organic–inorganic hybrid semiconductors is still an area in urgent need of exploration. Here, an organic–inorganic hybrid lead halide perovskite is reported, namely poly[(2‐azaniumylethyl)trimethylphosphanium [tetra‐μ‐bromido‐plumbate(II)]], {(C₅H₁₆NP)[PbBr₄]}_n, in which an organic cation is embedded in inorganic two‐dimensional (2D) mesh layers to produce a sandwich structure. This unique sandwich 2D hybrid perovskite material shows an indirect band gap of ～2.700 eV. The properties of this compound as a semiconductor are demonstrated by a series of optical characterizations and indicate potential applications for optical devices.     

Dimensional Reduction of Cs2AgBiBr6: A 2D Hybrid Double Perovskite with Strong Polarization Sensitivity

By dimensional reduction of the 3D motif of Cs₂AgBiBr₆, a lead‐free 2D hybrid double perovskite, (i‐PA)₂CsAgBiBr₇ ( 1, i‐PA=isopentylammonium), was successfully designed. It adopts a quantum‐confined bilayered structure with alternating organic and inorganic sheets. Strikingly, the unique 2D architecture endows it highly anisotropic nature of physical properties, including electric conductivity and optical absorption (the ratio α_b/α_c=1.9 at 405 nm). Such anisotropy attributes result in the strong polarization‐sensitive responses with large dichroic ratios up to 1.35, being comparable to some 2D inorganic materials. This is the first study on the hybrid double perovskites with strong polarization sensitivity. A crystal device of 1 also exhibits rapid response speed (ca. 200 μs) and excellent stabilities. The family of 2D hybrid double perovskites are promising optoelectronic candidates, and this work paves a new pathway for exploring new green polarization‐sensitive materials.     

(C6H13NH3)2(NH2CHNH2)Pb2I7: A Two‐dimensional Bilayer Inorganic–Organic Hybrid Perovskite Showing Photodetecting Behavior

Inorganic–organic hybrid perovskites, especially two‐dimensional (2D) layered halide perovskites, have attracted significant attention due to their unique structures and attractive optoelectronic properties, which open up a great opportunity for next‐generation photosensitive devices. Herein, we report a new 2D bilayered inorganic–organic hybrid perovskite, (C₆H₁₃NH₃)₂(NH₂CHNH₂)Pb₂I₇ ( HFA , where C₆H₁₃NH₃⁺ is hexylaminium and NH₂CHNH₂⁺ is formamidinium), which exhibits a remarkable photoresponse under broadband light illumination. Structural characterizations demonstrate that the 2D perovskite structure of HFA is constructed by alternant stacking of inorganic lead iodide bilayered sheets and organic hexylaminium layers. Optical absorbance measurements combined with density functional theory (DFT) calculations suggest that HFA is a direct band gap semiconductor with a narrow band gap (E_g) of ≈2.02 eV. Based on these findings, photodetectors based on HFA crystal wafer are fabricated, which exhibit fascinating optoelectronic properties including large on/off current ratios (over 10³), fast response speeds (τ_rise=310 μs and τ_decay=520 μs) and high responsivity (≈0.95 mA W^?1). This work will contribute to the design and development of new two‐dimensional bilayer inorganic–organic hybrid perovskites for high‐performance photosensitive devices.     

Exploring Lead‐Free Hybrid Double Perovskite Crystals of (BA)2CsAgBiBr7 with Large Mobility‐Lifetime Product toward X‐Ray Detection

Halide double perovskites have recently bloomed as the green candidates for optoelectronic applications, such as X‐ray detection. Despite great efforts, the exploration of promising organic–inorganic hybrid double perovskites toward X‐ray detection remains unsuccessful. Now, single crystals of the lead‐free hybrid double perovskite, (BA)₂CsAgBiBr₇ (BA⁺ is n‐butylammonium), featuring the unique 2D multilayered quantum‐confined motif, enable quite large μτ (mobility‐lifetime) product up to 1.21×10^?3 cm² V^?1. This figure‐of‐merit realized in 2D hybrid double perovskites is unprecedented and comparable with that of CH₃NH₃PbI₃ wafers. (BA)₂CsAgBiBr₇ crystals also exhibit other intriguing attributes for X‐ray detection, including high bulk resistivity, low density of defects and traps, and large X‐ray attenuation coefficient. Consequently, a vertical‐structure crystal device under X‐ray source yields a superior sensitivity of 4.2 μC Gy_air^?1 cm^?2.     

Effect of Organic Cation on Optical Properties of [A]Mn(H2POO)3 Hybrid Perovskites

Hybrid organic–inorganic compounds crystallizing in a three-dimensional (3D) perovskite-type architecture have attracted considerable attention due to their multifunctional properties. One of the most intriguing groups is perovskites with hypophosphite linkers. Herein, the optical properties of six hybrid hypophosphite perovskites containing manganese ions are presented. The band gaps of these compounds, as well as the luminescence properties of the octahedrally coordinated Mn²⁺ ions associated with the ⁴T_1g(G) → ⁶A_1g(S) transition are shown to be dependent on the organic cation type and Goldschmidt tolerance factor. Thus, a correlation between essential structural features of Mn-based hybrid hypophosphites and their optical properties was observed. Additionally, the broad infrared luminescence of the studied compounds was examined for potential application in an indoor lighting system for plant growth.     

Rashba Band Splitting and Bulk Photovoltaic Effect Induced by Halogen Bonds in Hybrid Layered Perovskites

Non-covalent interactions play an essential role in directing the self-assembly of hybrid organic–inorganic crystals. In hybrid halide perovskites, hydrogen bonding has been the paramount non-covalent interaction. Here, we show another non-covalent interaction, namely, the halogen bond interaction, that directs a symmetry-breaking assembly in a new series of two-dimensional (2D) perovskites (ICH₂CH₂NH₃)₂(CH₃NH₃)_n−1Pb_nI_3n+1 (n is the layer thickness, n=1–4). Structural analysis shows that the halogen bond strength varies with the layer thickness. For the odd number (n=1, 3) layered perovskites, stronger halogen interaction leads to centrosymmetric structures, whereas for the n=2 layered perovskites, weaker halogen bonds result in non-centrosymmetric structures. Transient reflection spectroscopy shows a suppressed radiative recombination rate (k₂≈0) and prolonged spin lifetime for n=2 structure, suggesting an enhanced Rashba band splitting effect. The structural asymmetry is further confirmed with a reversible bulk photovoltaic effect. Our work provides a new design strategy to enable hybrid perovskites with emerging properties and functionalities associated with structural asymmetry.     

Two-Dimensional Guanidine-Based Hybrid Perovskites with Strong Dichroism for Multiwavelength Polarization-Sensitive Detection

Two-dimensional (2D) organic–inorganic hybrid perovskites, benefiting from their natural anisotropy of quantum-well motifs and optical properties, have shown remarkable polarization-dependent responses superior to the 3D counterparts. Here, for the first time, multiwavelength polarization-sensitive detectors were fabricated by using single crystals of a guanidine-based 2D hybrid perovskite, (BA)₂(GA)Pb₂I₇ (where BA⁺ is n-butylammonium and GA⁺ is guanidium). Its unique 2D quantum-well structure results in strong crystallographic-dependence of optical absorption. Strikingly, our crystal-based photodetector exhibits a prominent photocurrent dichroic ratio (I_max/I_min) of ∼2.2 at 520 nm, higher than the typical 2D inorganic materials (GeSe, ∼1.09, PdSe₂, ∼1.8). In addition, notable dichroic ratios of 1.29 and 1.23 at 405 nm and 637 nm are also created for the multiwavelength polarized-light detection. The prominent detecting performances, including low dark current (1.6×10⁻¹¹ A), considerable on/off ratio (∼2×10³), high photodetectivity (∼3.3×10¹¹ Jones) and responsivity (∼12.01 mA W⁻¹), make (BA)₂(GA)Pb₂I₇ a promising candidate for polarized-light detection. This work sheds light on the rational engineering of new 2D hybrid perovskites for the high-performance optoelectronic device applications.     

A Quasi-Two-Dimensional Trilayered CsPbBr3-based Dion-Jacobson Hybrid Perovskite toward High-Performance Photodetection

Quasi-two-dimensional (Q-2D) Dion-Jacobson (DJ) organic-inorganic hybrid perovskites based on CsPbBr₃ are promising candidates for photodetection. Previous studies have predicted that the photoresponse of such materials with high inorganic-layer numbers (n) will be more protruding in this portfolio. However, until now, only bilayered (n=2) CsPbBr₃-based DJ-type hybrid perovskites are obtained and the higher number of layers (n>2) remain completely unexplored, owing to the relatively high formation energies. Here, by incorporating diamine into the 3D CsPbBr₃ motif, a new Q-2D trilayered CsPbBr₃-based DJ-type hybrid perovskite that contains organic cation and inorganic Cs metal, namely (4-AMP)Cs₂Pb₃Br₁₀ ( 1 , 4-AMP²⁺=4-(aminomethyl)piperidinium, n=3), is obtained. Excitingly, 1 exhibits excellent photoresponse, superior to its single-layered and bilayered counterparts. The resulting photodetectors thus exhibit a large on/off ratio (>10³), high photodetectivity (6.5×10¹⁰ Jones) and fast response speed (193 μs). As far as we know, 1 is the first Q-2D CsPbBr₃-based DJ-type hybrid perovskites with high n numbers. Our results may widen the range of the potential material in application of photodetection and will be helpful to design hybrid perovskites for other advanced optoelectronic devices.     

Zero‐Dimensional Hybrid Cd‐Based Perovskites with Broadband Bluish White‐Light Emissions

Recently, low‐dimensional organic‐inorganic hybrid metal halide perovskites acting as single‐component white‐light emitting materials have attracted extensive attention, but most studies concentrate on hybrid lead perovskites. Herein, we present two isomorphic zero‐dimensional (0D) hybrid cadmium perovskites, (HMEDA)CdX₄ (HMEDA=hexamethylenediamine, X=Cl ( 1 ), Br ( 2 )), which contain isolated [CdX₄]^2? anions separated by [HMEDA]²⁺ cations. Under UV light excitation, both compounds display broadband bluish white‐light emission (515 nm for 1 and 445 nm for 2 ) covering the entire visible light spectrum with sufficient photophysical stabilities. Remarkably, compound 2 shows a high color rendering index (CRI) of 83 enabling it as a promising candidate for single‐component WLED applications. Based on the temperature‐dependent, powder‐dependent and time‐resolved PL measurements as well as other detailed studies, the broadband light emissions are attributed to self‐trapped excitons stemming from the strong electron‐phonon coupling.     

(CH3NH3)2PdCl4: A Compound with Two‐Dimensional Organic–Inorganic Layered Perovskite Structure

The synthesis of previously unknown perovskite (CH₃NH₃)₂PdCl₄ is reported. Despite using an organic cation with the smallest possible alkyl group, a 2D organic–inorganic layered Pd‐based perovskites was still formed. This demonstrates that Pd‐based 2D perovskites can be obtained even if the size of the organic cation is below the size limit predicted by the Goldschmidt tolerance‐factor formula. The (CH₃NH₃)₂PdCl₄ phase has a bulk resistivity of 1.4 Ω cm, a direct optical gap of 2.22 eV, and an absorption coefficient on the order of 10⁴ cm^?1. XRD measurements suggest that the compound is moderately stable in air, an important advantage over several existing organic–inorganic perovskites that are prone to phase degradation problems when exposed to the atmosphere. Given the recent interest in organic–inorganic perovskites, the synthesis of this new Pd‐based organic–inorganic perovskite may be helpful in the preparation and understanding of other organic–inorganic perovskites.     

All-Inorganic Lead-Free 0D Perovskites by a Doping Strategy to Achieve a PLQY Boost from <2 % to 90 %

Zero-dimensional (0D) lead-free perovskites have unique structures and optoelectronic properties. Undoped and Sb-doped all inorganic, lead-free, 0D perovskite single crystals A₂InCl₅(H₂O) (A=Rb, Cs) are presented that exhibit greatly enhanced yellow emission. To study the effect of coordination H₂O, Sb-doped A₃InCl₆ (A=Rb, Cs) are also synthesized and further studied. The photoluminescence (PL) color changes from yellow to green emission. Interestingly, the photoluminescence quantum yield (PLQY) realizes a great boost from <2 % to 85–95 % through doping Sb³⁺. We further explore the effect of Sb³⁺ dopants and the origin of bright emission by ultrafast transient absorption techniques. Furthermore, Sb-doped 0D rubidium indium chloride perovskites show excellent stability. These findings not only provide a way to design a set of new high-performance 0D lead-free perovskites, but also reveal the relationship between structure and PL properties.     

Molecular Disorder Induces an Unusual Phase Transition in a Potential 2D Chiral Ferroelectric Perovskite

Two-dimensional hybrid halide perovskites with single chiral and ferroelectricity together with various structural phase transitions provide the possibility for more diverse functional properties. Here, we present a 2D chiral hybrid halide perovskite ferroelectric, [C₆H₅(CH₂)₄NH₃]₂CdCl₄ (4PBA−CdCl₄, 4PBA=4-phenylbutylamine) that experiences two continuous phase transitions from centrosymmetric triclinic P to polar chiral monoclinic P2 and then to another centrosymmetric tetragonal P4/mmm with increasing temperature, accompanied by symmetry breaking, due to the prominent octahedral distortion and disorder transformation of organic 4PBA cations. In the polar chiral phase, 4PBA−CdCl₄ gives a significant CD signal and has a moderate ferroelectric polarization of 0.35 μC/cm². In addition, 4PBA−CdCl₄ occupies a wide band gap of 4.376 eV that is chiefly contributed by the inorganic CdCl₆ octahedron. This finding offers an alternative pathway for designing new phase transitions and related physical properties in hybrid halide perovskites and other hybrid crystals.     

Expanded Analogs of Three-Dimensional Lead-Halide Hybrid Perovskites

Replacing the Pb−X octahedral building unit of A^IPbX₃ perovskites (X=halide) with a pair of edge-sharing Pb−X octahedra affords the expanded perovskite analogs: A^IIPb₂X₆. We report seven members of this new family of materials. In 3D hybrid perovskites, orbitals from the organic molecules do not participate in the band edges. In contrast, the more spacious inorganic sublattice of the expanded analogs accommodates larger pyrazinium-based cations with low-lying π* orbitals that form the conduction band, substantially decreasing the band gap of the expanded lattice. The molecular nature of the conduction band allows us to electronically dope the materials by reducing the organic molecules. By synthesizing derivatives with A^II=pyridinium and ammonium, we can isolate the contributions of the pyrazinium-based orbitals in the band gap transition of A^IIPb₂X₆. The organic-molecule-based conduction band and the inorganic-ion-based valence band provide an unusual electronic platform with localized states for electrons and more disperse bands for holes upon optical or thermal excitation.     

Air‐Stable,Lead‐Free Zero‐Dimensional Mixed Bismuth‐Antimony Perovskite Single Crystals with Ultra‐broadband Emission

Lead‐free zero‐dimensional (0D) organic‐inorganic metal halide perovskites have recently attracted increasing attention for their excellent photoluminescence properties and chemical stability. Here, we report the synthesis and characterization of an air‐stable 0D mixed metal halide perovskite (C₈NH₁₂)₄Bi_0.57Sb_0.43Br₇?H₂O, in which individual [BiBr₆]^3? and [SbBr₆]^3? octahedral units are completely isolated and surrounded by the large organic cation C₈H₁₂N⁺. Upon photoexcitation, the bulk crystals exhibit ultra‐broadband emission ranging from 400 to 850 nm, which originates from both free excitons and self‐trapped excitons. This is the first example of 0D perovskites with broadband emission spanning the entire visible spectrum. In addition, (C₈NH₁₂)₄Bi_0.57Sb_0.43Br₇?H₂O exhibits excellent humidity and light stability. These findings present a new direction towards the design of environmentally‐friendly, high‐performance 0D perovskite light emitters.     

Crystallization of Methylammonium Lead Halide Perovskites by Optical Trapping

Single crystals of organolead halide perovskites attract much attention to electrooptical and photovoltaic applications. They are usually prepared in precursor solutions incubated at controlled temperatures or under optimized vapor atmosphere conditions, and thus, multiple perovskite crystals are nucleated all over the solution. Multiple nucleation of crystals prevents efficient use of precursors in the preferential growth of large single crystals. An innovative approach is presented for spatiotemporally controlled, selective nucleation and growth of single crystals of lead halide perovskites by optical trapping with a focused laser beam. Upon such trapping in unsaturated precursor solutions, nucleation of MAPbX₃ (MA=CH₃NH₃⁺; X=Cl^?, Br^?, or I^?) is induced at the focal spot through increase in the concentration of perovskite precursors in the focal volume. The rate at which the nucleated crystal grows depends upon whether the perovskite absorbs the trapping laser or not. These findings suggest that optical trapping would be useful to prepare various perovskite single crystals and modify their optical and electronic properties; thereby, offering new methods for engineering of perovskite crystals.     

All‐Inorganic Lead‐Free 0D Perovskites by a Doping Strategy to Achieve a PLQY Boost from <2 % to 90 %

Zero‐dimensional (0D) lead‐free perovskites have unique structures and optoelectronic properties. Undoped and Sb‐doped all inorganic, lead‐free, 0D perovskite single crystals A₂InCl₅(H₂O) (A=Rb, Cs) are presented that exhibit greatly enhanced yellow emission. To study the effect of coordination H₂O, Sb‐doped A₃InCl₆ (A=Rb, Cs) are also synthesized and further studied. The photoluminescence (PL) color changes from yellow to green emission. Interestingly, the photoluminescence quantum yield (PLQY) realizes a great boost from <2 % to 85–95 % through doping Sb³⁺. We further explore the effect of Sb³⁺ dopants and the origin of bright emission by ultrafast transient absorption techniques. Furthermore, Sb‐doped 0D rubidium indium chloride perovskites show excellent stability. These findings not only provide a way to design a set of new high‐performance 0D lead‐free perovskites, but also reveal the relationship between structure and PL properties.     

Impact of Structural Disorder on Excitonic Behaviors and Dynamics in 2D Organic-Inorganic Hybrid Perovskites

Two thin-film 2D organic-inorganic hybrid perovskites, i.e., 2-phenylethylammonium lead iodide (PEPI) and 4-phenyl-1-butylammonium lead iodide (PBPI) were synthesized and investigated by steady-state absorption, temperature-dependent photoluminescence, and temperature-dependent ultrafast transient absorption spectroscopy. PBPI has a longer organic chain (via introducing extra ethyl groups) than PEPI, thus its inorganic skeleton can be distorted, bringing on structural disorder. The comparative analyses of spectral profiles and temporal dynamics revealed that the greater structural disorder in PBPI results in more defect states serving as trap states to promote exciton dynamics. In addition, the fine-structuring of excitonic resonances was unveiled by temperature-dependent ultrafast spectroscopy, suggesting its correlation with inorganic skeleton rather than organic chain. Moreover, the photoexcited coherent phonons were observed in both PEPI and PBPI, pointing to a subtle impact of structural disorder on the low-frequency Raman-active vibrations of inorganic skeleton. This work provides valuable insights into the optical properties, excitonic behaviors and dynamics, as well as coherent phonon effects in 2D hybrid perovskites.     

Low-Dimensional Organic Tin Bromide Perovskites and Their Photoinduced Structural Transformation

Hybrid organic–inorganic metal halide perovskites possess exceptional structural tunability, with three- (3D), two- (2D), one- (1D), and zero-dimensional (0D) structures on the molecular level all possible. While remarkable progress has been realized in perovskite research in recent years, the focus has been mainly on 3D and 2D structures, with 1D and 0D structures significantly underexplored. The synthesis and characterization of a series of low-dimensional organic tin bromide perovskites with 1D and 0D structures is reported. Using the same organic and inorganic components, but at different ratios and reaction conditions, both 1D (C₄N₂H₁₄)SnBr₄ and 0D (C₄N₂H₁₄Br)₄SnBr₆ can be prepared in high yields. Moreover, photoinduced structural transformation from 1D to 0D was investigated experimentally and theoretically in which photodissociation of 1D metal halide chains followed by structural reorganization leads to the formation of a more thermodynamically stable 0D structure.