Electrophilic Reactivities of Azodicarboxylates

The kinetics of the reactions of the azodicarboxylates 1 with the enamines 2 have been studied in CH₃CN at 20 °C. The reactions follow a second‐order rate law and can be described by the linear free energy relationship log k₂(20 °C)=s(N+E) (E=electrophilicity parameter, N=nucleophilicity parameter, and s=nucleophile‐specific slope parameter). With E parameters from ?12.2 to ?8.9, the electrophilic reactivities of 1 turned out to be comparable to those of α,β‐unsaturated iminium ions, amino‐substituted benzhydrylium ions, and ordinary Michael acceptors. While the E parameters of the azodicarboxylates 1 determined in this work also hold for their reactions with triarylphosphines, they cannot be used for estimating rate constants for their reactions with amines. Comparison of experimental and calculated rate constants for cycloadditions and ene reactions of azodicarboxylates provides information on the concertedness of these reactions.     

SN2’ versus SN2 Reactivity: Control of Regioselectivity in Conversions of Baylis–Hillman Adducts

TiCl₄‐induced Baylis–Hillman reactions of α,β‐unsaturated carbonyl compounds with aldehydes yield the (Z)‐2‐(chloromethyl)vinyl carbonyl compounds 5 , which react with 1,4‐diazabicyclo[2.2.2]octane (DABCO), quinuclidine, and pyridines to give the allylammonium ions 6 . Their combination with less than one equivalent of the potassium salts of stabilized carbanions (e.g. malonate) yields methylene derivatives 8 under kinetically controlled conditions (S_N2’ reactions). When more than one equivalent of the carbanions is used, a second S_N2’ reaction converts 8 into their thermodynamically more stable allyl isomers 9 . The second‐order rate constants for the reactions of 6 with carbanions have been determined photometrically in DMSO. With these rate constants and the previously reported nucleophile‐specific parameters N and s for the stabilized carbanions, the correlation log k (20 °C)=s(N + E) allowed us to calculate the electrophilicity parameters E for the allylammonium ions 6 (?19<E <?18). The kinetic data indicate the S_N2’ reactions to proceed via an addition–elimination mechanism with a rate‐determining addition step.     

Nucleophilicity parameters of enamides and their implications for organocatalytic transformations

The kinetics of the reactions of eleven substituted enamides with benzhydrylium ions (diarylcarbenium ions) were determined in acetonitrile solution. The second-order rate constants follow the correlation log k(2) (20 °C)=s(N)(E+N), which allowed us to derive reactivity parameters N and s(N). With 4.6相似文献   

Quantification of the Electrophilicities of Diazoalkanes: Kinetics and Mechanism of Azo Couplings with Enamines and Sulfonium Ylides

Kinetics and mechanism of the reactions of methyl diazoacetate, dimethyl diazomalonate, 4-nitrophenyldiazomethane, and diphenyldiazomethane with sulfonium ylides and enamines were investigated by UV-Vis and NMR spectroscopy. Ordinary alkenes undergo 1,3-dipolar cycloadditions with these diazo compounds. In contrast, sulfonium ylides and enamines attack at the terminal nitrogen of the diazo alkanes to give zwitterions, which undergo various subsequent reactions. As only one new bond is formed in the rate-determining step of these reactions, the correlation lg k₂(20 °C)=s_N(N+E) could be used to determine the one-bond electrophilicities E of the diazo compounds from the measured second-order rate constants and the known reactivity indices N and s_N of the sulfonium ylides and enamines. The resulting electrophilicity parameters (−21<E<−18), which are 11–14 orders of magnitude smaller than that of the benzenediazonium ion, are used to define the scope of one-bond nucleophiles which may react with these diazoalkanes.     

Quantification of Ion‐Pairing Effects on the Nucleophilic Reactivities of Benzoyl‐ and Phenyl‐Substituted Carbanions in Dimethylsulfoxide

Second‐order rate constants for the reactions of acceptor‐substituted phenacyl (PhCO?CH^??Acc) and benzyl anions (Ph?CH^??Acc) with diarylcarbenium ions and quinone methides (reference electrophiles) have been determined in dimethylsulfoxide (DMSO) solution at 20 °C. By studying the kinetics in the presence of variable concentrations of potassium, sodium and lithium salts (up to 10^?2 mol L^?1), the influence of ion‐pairing on the reaction rates was examined. As the concentration of K⁺ did not have any influence on the rate constants at carbanion concentrations in the range of 10^?4–10^?3 mol L^?1, the acquired rate constants could be assigned to the reactivities of the free carbanions. The counter ion effects increase, however, in the series K⁺<Na⁺<Li⁺, and the sensitivity of the carbanion reactivities toward variation of the counter ion strongly depends on the structure of the carbanions. The reactivity parameters N and s_N of the free carbanions were derived from the linear plots of log k₂ against the electrophilicity parameters E of the reference electrophiles, according to the linear‐free energy relationship log k₂(20 °C)=s_N(N+E). These reactivity parameters can be used to predict absolute rate constants for the reactions of these carbanions with other electrophiles of known E parameters.     

Solvation Accounts for the Counterintuitive Nucleophilicity Ordering of Peroxide Anions

The nucleophilic reactivities (N , s _N) of peroxide anions (generated from aromatic and aliphatic peroxy acids or alkyl hydroperoxides) were investigated by following the kinetics of their reactions with a series of benzhydrylium ions (Ar₂CH⁺) in alkaline aqueous solutions at 20 °C. The second‐order rate constants revealed that deprotonated peroxy acids (RCO₃⁻), although they are the considerably weaker Brønsted bases, react much faster than anions of aliphatic hydroperoxides (ROO⁻). Substitution of the rate constants of their reactions with benzhydrylium ions into the linear free energy relationship lg k =s _N(N +E ) furnished nucleophilicity parameters (N , s _N) of peroxide anions, which were successfully applied to predict the rates of Weitz–Scheffer epoxidations. DFT calculations with inclusion of solvent effects by means of the Integral Equation Formalism version of the Polarizable Continuum Model were performed to rationalize the observed reactivities.     

Hydrocarbation of CC Bonds: Quantification of the Nucleophilic Reactivity of Ynamides

Donor‐substituted diarylcarbenium ions Ar₂CH⁺ react with ynamides to give 1‐amido‐substituted allyl cations (α,β‐unsaturated iminium ions). Kinetic studies show that these adducts, which correspond to the addition of a C? H bond across the C?C bond, are formed stepwise with initial formation of keteniminium ions and subsequent 1,3‐hydride shifts. The linear correlations between the second‐order rate constants (lg k₂, 20 °C) with the electrophilicity parameters E of the diarylcarbenium ions allow us to include ynamides in our comprehensive nucleophilicity scale and thus predict potential electrophilic reaction partners.     

Fine‐Tuning the Nucleophilic Reactivities of Boron Ate Complexes Derived from Aryl and Heteroaryl Boronic Esters

Boron ate complexes derived from thienyl and furyl boronic esters and aryllithium compounds have been isolated and characterized by X‐ray crystallography. Products and mechanisms of their reactions with carbenium and iminium ions have been analyzed. Kinetics of these reactions were monitored by UV/Vis spectroscopy, and the influence of the aryl substituents, the diol ligands (pinacol, ethylene glycol, neopentyl glycol, catechol), and the counterions on the nucleophilic reactivity of the boron ate complexes were examined. A Hammett correlation confirmed the polar nature of their reactions with benzhydrylium ions, and the correlation lg k(20 °C)=s_N(E+N) was employed to determine the nucleophilicities of the boron ate complexes and to compare them with those of other borates and boronates. The neopentyl and ethylene glycol derivatives were found to be 10⁴ times more reactive than the pinacol and catechol derivatives.     

Nucleophilicities of Para‐Substituted Phenoxide Ions in Water and Correlation Analysis

Second‐order rate constants for the reactions of 2‐aryl‐4,6‐dinitrobenzotriazole 1‐oxides 1a‐d with some 4‐X‐substituted phenoxide ions 2a‐d (X = OCH₃, H, Cl, and CN) have been measured in aqueous solution at 20°C. The pK_a values for the σ‐complexation processes of a series of benzotriazole 1a‐d measured in water have been used to determine their electrophilicity parameters E according to the correlation E = –3.20 – 0.662 pK_a (F. Terrier, S. Lakhdar, T. Boubaker, and R. Goumont, J Org Chem, 2005 , 70, 6242–6253). For these reactions, plots of log k versus the electrophilicity parameters E of the benzotriazoles 1a‐d were linear, allowing to derive the nucleophilicity parameters N and s for phenoxide ions as defined by the Mayr equation log k₁ (20°C) = s (E + N) (H. Mayr, M. Patz. Angew Chem, Int Ed Engl 1994 , 33, 938–957). The N values are found to cover a range of nucleophilicity from 6.85 to 10.22, going from 4‐cyanophenoxide 2d for the least reactive ion to 4‐methoxyphenoxide 2a for the most reactive nucleophile. Good linear correlations were found between the nucleophilicity parameters N of phenoxide ions 2a‐d and the pK_a values of their conjugate acids (N = –3.05 + 1.25 pK_a) and the constants of the substituents X (N = 9.21 – 2.51).     

Mechanism and Linear Free Energy Relationships in Michael‐Type Addition of 4‐Substituted Anilines to Activated Olefin in Acetonitrile

Kinetic studies for the Michael‐type reactions of ethyl‐3‐(4′‐N,N‐dimethylaminophenyl)‐2‐(nonafluorobutane)sulfonylpro‐penoate 1 with 4‐X‐substituted anilines 2a–e (X = OCH₃, CH₃, H, F, and Cl) have been investigated in acetonitrile at 20°C. A quadratic dependence of the pseudo–first‐order rate constants (k_obsd) versus [ 2a–e ] has been observed and has been interpreted in terms of a dimer nucleophile mechanism. The finding of a relatively large negative ρ value (?3.09) for the Hammett plot suggests that the intermediate ( I^± ) is highly zwitterionic in nature. A linear correlation (r² = 0.9989) between the Hammett's substituent constants σ and nucleophilicity parameters N of 4‐X‐substituted anilines in acetonitrile has been observed. The electrophilicity parameters E of the olefin 1 is evaluated, using the correlations σ versus N and log k versus σ and compared with the electrophilicities of analogously Michael acceptors.     

Kinetic Studies on SNAr Reactions of Substituted Benzofurazan Derivatives: Quantification of the Electrophilic Reactivities and Effect of Amine Nature on Reaction Mechanism

Kinetics of the nucleophilic aromatic substitution reactions of 7‐L‐4‐nitrobenzofurazans 1 ( 1a : L = Cl and 1b : L = OCH₃) and secondary cyclic amines (morpholine, piperidine, and pyrolidine) 2a–c have been measured in acetonitrile solution at 20°C. The derived values of second‐order rate constants (k ₁) have been employed to determine the electrophilicity parameters E for both benzofurazans 1a and 1b according to the linear free enthalpy relationship: log k (20°C) = s_N(E + N ) (Eq. 1 ). The second‐order rate constants for reactions of benzofurazans 1 with a series of 4‐X‐substituted anilines 3a–d (X = OH, OCH₃, CH₃, and H) have also been measured in MeCN and found to agree within a factor of 0.14–50 with those calculated by Eq. 1 from the electrophilicity parameters E measured in this work and the known nucleophile‐specific parameters N and s _N of anilines 3 . On the other hand, the reactions of these benzofurazans 1 with anilines 3 exhibit linear Brønsted‐type plots with β_nuc = 1.27 for 1a and 1.01 for 1b , which are considerably greater than those (0.57 for 1a and 0.62 for 1b ) obtained with the secondary cyclic amines 2 . These high values of β_nuc have been interpreted in terms of a single electron transfer mechanism. Secondary evidence for the validity of this mechanism is provided by the agreement between the rate constants, k ₁, for substitution of benzofurazans 1 by the anilines 3 and their oxidation potentials E °.     

Kinetics of Hydride Abstractions from 2‐Arylbenzimidazolines

The rates of the hydride abstractions from the 2‐aryl‐1,3‐dimethyl‐benzimidazolines 1a – f by the benzhydrylium tetrafluoroborates 3a – e were determined photometrically by the stopped‐flow method in acetonitrile at 20 °C. The reactions follow second‐order kinetics, and the corresponding rate constants k₂ obey the linear free energy relationship log k₂(20 °C)= s(N+E), from which the nucleophile‐specific parameters N and s of the 2‐arylbenzimidazolines 1a – c have been derived. With nucleophilicity parameters N around 10, they are among the most reactive neutral C? H hydride donors which have so far been parameterized. The poor correlation between the rates of the hydride transfer reactions and the corresponding hydricities (ΔH⁰) indicates variable intrinsic barriers.     

How Small Amounts of Impurities Are Sufficient to Catalyze the Interconversion of Carbonyl Compounds and Iminium Ions,or Is There a Metathesis through 1,3‐Oxazetidinium Ions? Experiments,Speculations, and Calculations

Under the ‘best anhydrous’ conditions, we were able to achieve, the bicyclic oxazolidinones derived from proline and pivalaldehyde (or cyclohexanone) equilibrate with added carbonyl compounds in (D₆)DMSO and in (D₆)benzene. With (¹⁸O)cyclohexanone, no incorporation of the label into the 1,3‐oxazolidinone ring was observed (in‐situ NMR investigations; Figs. 1, 3, and 4). Since an iminium‐carboxylate zwitterion might be involved in this process, we also studied the reaction of N‐isopropylidene‐pyrrolidinium perchlorate with cyclohexanone in anhydrous CDCl₃ (Fig. 5). We speculated that an interconversion between iminium and carbonyl species might occur in the absence of H₂O or other impurities, i.e., formally a metathesis through 1,3‐oxazetidinium ions (Schemes 2 and 3). A theoretical investigation with various DFT methods, ranging all the way to CCSD(T)/aug‐cc‐pVTZ//MP2/def2‐QZVPP, shows (Figs. 8–11) that oxazetidinium ions are stable species (more or less equi‐energetic with the reactants iminium ion+carbonyl system), but that the transition states leading to these cations are too high in energy for a reaction taking place in the gas phase at room temperature. Further investigations are proposed to study the iminium? carbonyl interconversion mechanism.     

Electrophilicities of Bissulfonyl Ethylenes

Kinetics of the reactions of bissulfonyl ethylenes with various carbanions, a sulfur ylide, and siloxyalkenes have been investigated photometrically at 20 °C. The second‐order rate constants have been combined with the known nucleophile‐ specific parameters N and s_N for the nucleophiles to calculate the empirical electrophilicity parameters E of bissulfonyl ethylenes according to the linear free energy relationship log k(20 °C)=s_N(N+E). Structure‐reactivity relationships are discussed, and it is shown that the electrophilicity parameters E derived in this work can be employed to define the synthetic potential of bissulfonyl ethylenes as Michael acceptors.     

Hydride‐Donor Abilities of 1,4‐Dihydropyridines: A Comparison with π Nucleophiles and Borohydride Anions

How are dihydropyridines like indoles? Both groups of compounds have similar nucleophilicity parameters N and are therefore suitable substrates for iminium‐catalyzed reactions of α,β‐unsaturated aldehydes. The N parameters of 1,4‐dihydropyridines were derived from the rates of hydride transfer reactions to benzhydrylium ions (see scheme).

     

Nucleophilic Substitution Reactions of 2‐Methoxy‐3‐X‐5‐nitrothiophenes: Effect of Substituents and Structure–Reactivity Correlations

A kinetic study is reported for reactions of 2‐methoxy‐3‐X‐5‐nitrothiophenes 1a–d (X = SO₂CH₃, CO₂CH₃, CONH₂, H) with piperidine in different solvents at 20°C. It is shown that the reactions take place through a S_NAr mechanism with the initial nucleophilic addition step being rate limiting. The satisfactory Hammett correlations (log k₁ vs. σ) obtained in the present system confirms that a 3‐X substituent exerts an effect on the 2‐position of the same type as that exerted from the 5‐position. The second‐order rate constants associated with these reactions are employed to determine the electrophilicity parameters E of the thiophenes 1a–d according to the relationship log k (20°C) = s(E + N) (Angew. Chem., Int. Ed. Engl. 1994, 33, 938–957). The E values of 1a–d are found to cover a range from ?21.33 to ?17.18, going from 1d , the least reactive, to 1a , the most reactive thiophene. Interestingly, a linear correlation (r² = 0.9910) between the electrophilicity parameters E determined in this work and the Hammett's σ constants values has been observed and discussed. On the other hand, we have found that the reported rate constants of some thiophenes 1 complexation by the methoxide ion in methanol are 3.5–73.5 times higher than predicted by Mayr's approach.     

Nucleophilicities and carbon basicities of pyridines

Rate and equilibrium constants for the reactions of pyridines with donor‐substituted benzhydrylium ions have been determined spectrophotometrically. The correlation equation log k(20 °C)=s(N+E), in which s and N are nucleophile‐specific parameters and E is an electrophile‐specific parameter, has been used to determine the nucleophilicity parameters of various pyridines in CH₂Cl₂ and aqueous solution and to compare them with N of other nucleophiles. It is found that the nucleophilic organocatalyst 4‐(dimethylamino)pyridine (DMAP) and tertiary phosphanes have comparable nucleophilicities and carbon basicities despite widely differing Brønsted basicities. For that reason, these reactivity parameters are suggested as guidelines for the development of novel organocatalysts. The Marcus equation is employed for the determination of the intrinsic barriers of these reactions.     

Exploration of the Synthetic Potential of Electrophilic Trifluoromethylthiolating and Difluoromethylthiolating Reagents

The electrophilicity parameters (E) of some trifluoromethylthiolating and difluoromethylthiolating reagents were determined by following the kinetics of their reactions with a series of enamines and carbanions with known nucleophilicity parameters (N, s_N), using the linear free‐energy relationship log k₂=s_N(N+E). The electrophilic reactivities of these reagents cover a range of 17 orders of magnitude, with Shen and Lu's reagent 1 a being the most reactive and Billard's reagent 1 h being the least reactive electrophile. While the observed electrophilic reactivities (E) of the amido‐derived trifluoromethylthiolating reagents correlate well with the calculated Gibbs energies for heterolytic cleavage of the X?SCF₃ bonds (Tt⁺DA), the cumol‐derived reagents 1 f and 1 g are more reactive than expected from the thermodynamics of the O?S cleavage. The E parameters of the tri/difluoromethylthiolating reagents derived in this work provide an ordering principle for their use in synthesis.     

Kinetics and quantification of the electrophilic reactivities of substituted thiophenes and structure‐reactivity relationships

Second‐order rate constants (k₁) have been measured spectrophotometrically for reactions of 2‐methoxy‐3‐X‐5‐nitrothiophene 1a‐c (X = NO₂, CN, and COCH₃) with secondary cyclic amines (pyrrolidine 2a , piperidine 2b , and morpholine 2 c ) in CH₃CN and 91:9 (v/v) CH₃OH/CH₃CN at 20°C. The experimental data show that the rate constants (k₁) values exhibit good correlation with the parameters of nucphilicity (N) of the amines 2a‐c and are consistent with the Mayr's relationship log k (20°C) = s(E + N). We have shown that the electrophilicity parameters E derived for 1a–c and those reported previously for the thiophenes 1d‐g (X = SO₂CH₃, CO₂CH₃, CONH₂, and H) are linearly related to the pK_a values for their gem‐dimethoxy complexes in methanol. Using this correlation, we successfully evaluated the electrophilicity E values of 12 structurally diverse electrophiles in methanol for the first time. In addition, a satisfactory linear correlation (r² = 0.9726) between the experimental (log k_exp) and the calculated (log k_calcd) values for the σ‐complexation reactions of these 12 electrophiles with methoxide ion in methanol has been observed and discussed.     

Structure-nucleophilicity relationships for enamines

The kinetics of the reactions of benzhydryl cations with 22 enamines, three pyrroles, and three indoles were investigated photometrically in dichloromethane. The nucleophilicity parameters N and slope parameters s of these electron-rich pi-systems were derived from equation log k (20 degrees C)=s(E+N) and compared with the nucleophilicities of other pi-systems (silyl enol ethers, silyl ketene acetals) and carbanions. It is shown that the nucleophilic reactivities of enamines cover more than ten orders of magnitude, comparable to enol ethers on the low reactivity end and to carbanions on the high reactivity end. Since the products of N-attack are thermodynamically less stable than the reactants, the observed rate constants refer to the formation of the carbon bond;carbon bonds. In some cases, equilibrium constants for the formation of iminium ions were measured, which allow one to determine the intrinsic rate constants of these reactions.