Novel Approach for the Decoration of Magnetic Carbon Nanospheres with Platinum Nanoparticles and Their Enhanced Peroxidase Activity for the Colorimetric Detection of H2O2

Pt/Fe3O4-DIB-DETA-CNS(PFDDC)nanocomposite(DIB=2,4-dihydroxybenzaldehyde;DETA=diethylenetfiamine;CNS=carbon nanosphere)was synthesized by dispersing Pt nanoparticles on magnetic carbon nanospheres. The structure,morphology and composition of the nanocomposite were studied by X-ray diffraction(XRD),transmission electron microscopy(TEM),energy-dispersive X-ray spectroscopy(EDX)and X-ray photoelectron spectroscopy(XPS). In addition,the nanocomposite showed superior peroxidase-like activity towards 3,3',5,5'-tetramethylbenzidine(TMB) with a visual color change in the presence of hydrogen peroxide(H2O2).Therefore,the PFDDC nanocomposite provides a sensing platform for the colorimetric detection of H2O2 with high sensitivity and selectivity.Furthermore,the nanocomposite can be conveniently preserved and separated.These features enable the nanocomposite to colorimetrically detect H2O2 for potential pharmaceutical,environmental and industrial applications.     

The Hybrid of Gold Nanoparticles and 3D Flower‐like MnO2 Nanostructure with Enhanced Activity for Detection of Hydrogen Peroxide

3D Flower‐like manganese dioxide (MnO₂) nanostructure with the ability of catalysis for hydrogen peroxide (H₂O₂) and super large area that can support gold nanoparticles (AuNPs) with enhanced activity of electron transfer have been developed. The nanostructure of hybrids was prepared by directly mixing citric‐capped AuNPs and 3‐aminopropyltriethoxysilane (3‐APTES)‐capped nano‐MnO₂ using an electrostatic adsorption strategy. The Au‐MnO₂ composite was extensively characterized by scanning electron microscope (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), the Brunauer‐Emmett‐Teller (BET) method and X‐ray photoemission spectroscopy (XPS). Electrochemical properties were evaluated through cyclic voltammetry (CV) and amperometric method. The prepared sensor showed excellent electrochemical properties towards H₂O₂ with a wide linear range from 2.5×10⁻³∼1.39 mM and 3.89∼13.89 mM. The detection limit is 0.34 μM (S/N=3) with the sensitivities of 169.43 μA mM⁻¹ cm⁻² and 55.72 μA mM⁻¹ cm⁻². The detection of real samples was also studied. The result exhibited that the prepared sensor can be used for H₂O₂ detection in real samples.     

Template‐free Fabrication of Hierarchical Macro‐/mesoporous N‐doped TiO2/graphene Oxide Composites with Enhanced Visible‐light Photocatalytic Activity

Hierarchical macro‐/mesoporous N‐doped TiO₂/graphene oxide (N‐TiO₂/GO) composites were prepared without using templates by the simple dropwise addition mixed solution of tetrabutyl titanate and ethanol containg graphene oxide (GO) to the ammonia solution, and then calcined at 350 °C. The as‐prepared samples were characterized by scanning electron microscopy (SEM), Brunauer‐Emmett‐Teller (BET) surface area, X‐ray diffraction (XRD), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), and UV‐Vis absorption spectroscopy. The photocatalytic activity was evaluated by the photocatalytic degradation of methyl orange in an aqueous solution under visible‐light irradiation. The results show that N‐TiO₂/GO composites exhibited enhanced photocatalytic activity. GO content exhibited an obvious influence on photocatalytic performance, and the optimal GO addition content was 1 wt%. The enhanced photocatalytic activity could be attributed to the synergetic effects of three factors including the improved visible light absorption, the hierarchical macro‐mesoporous structure, and the efficient charge separation by GO.     

Construction of a 2D Graphene‐Like MoS2/C3N4 Heterojunction with Enhanced Visible‐Light Photocatalytic Activity and Photoelectrochemical Activity

A novel graphene‐like MoS₂/C₃N₄ (GL‐MoS₂/C₃N₄) composite photocatalyst has been synthesized by a facile ethylene glycol (EG)‐assisted solvothermal method. The structure and morphology of this GL‐MoS₂/C₃N₄ photocatalyst have been investigated by a wide range of characterization methods. The results showed that GL‐MoS₂ was uniformly distributed on the surface of GL‐C₃N₄ forming a heterostructure. The obtained composite exhibited strong absorbing ability in the ultraviolet (UV) and visible regions. When irradiated with visible light, the composite photocatalyst showed high activity superior to those of the respective individual components GL‐MoS₂ and GL‐C₃N₄ in the degradation of methyl orange. The enhanced photocatalytic activity of the composite may be attributed to the efficient separation of electron–hole pairs as a result of the matching band potentials between GL‐MoS₂ and GL‐C₃N₄. Furthermore, a photocatalytic mechanism for the composite material has been proposed, and the photocatalytic reaction kinetics has been measured. Moreover, GL‐MoS₂/C₃N₄ could serve as a novel sensor for trace amounts of Cu²⁺ since it exhibited good selectivity for Cu²⁺ detection in water.     

3D Nano‐structure L‐cysteine/AuNPs/Bi2O3 Modified Glass Carbon Electrode as Chemical Sensor for Highly Sensitive and Selective Detection Cu (II)

It was first time using the l‐cysteine self‐assembled on the surface of gold nanoparticles and Bi₂O₃ nano‐structured materials modified GCE composed l‐cysteine/AuNPs/Bi₂O₃/GCE sensor. The sensor possessed three‐dimensional nanostructure and exhibited a higher ratio of activity sites, large active surface, fast electron transfer rate, excellent catalytic, sensing characteristics and larger affinity to Cu (II). The sensor was determined to have an excellent sensitivity and selectivity for the detection of Cu (II). The characterization of sensor as well as the optimization of the analytical procedure was reported. The optimized conditions parameters allowed the detection of Cu (II) concentration following short analysis time, a detection limit of 5×10^?11 M at 80 s of preconcentration time was obtained using the as‐prepared sensor, and also show excellent stability and good repeatability, and, thus, could be used for detection of Cu (II) in environment.     

Self‐Assembled Prussian Blue Nanoparticles Based Electrochemical Sensor for High Sensitive Determination of H2O2 in Acidic Media

In this paper, self‐assembled Prussian blue nanoparticles (PBNPs) on carbon ceramic electrode (CCE) were developed as a high sensitive hydrogen peroxide (H₂O₂) electrochemical sensor. The PBNPs film was prepared by a simple dipping method. The morphology of the PBNPs‐modified CCE was characterized by scanning electron microscopy (SEM). The self‐assembled PB film exhibited sufficient mechanical, electrochemical stability and high sensitivity in compare with other PB based H₂O₂ sensors. The sensor showed a good linear response for H₂O₂ over the concentration range 1 μM–0.26 mM with a detection limit of ca. 0.7 μM (S/N=3), and sensitivity of 754.6 mA M^?1 cm^?2. This work demonstrates the feasibility of self‐assembled PBNPs‐modified CCE for practical sensing applications.     

CuSO4/H2O2‐Induced Rapid Deposition of Polydopamine Coatings with High Uniformity and Enhanced Stability

Mussel‐inspired polydopamine (PDA) deposition offers a promising route to fabricate multifunctional coatings for various materials. However, PDA deposition is generally a time‐consuming process, and PDA coatings are unstable in acidic and alkaline media, as well as in polar organic solvents. We report a strategy to realize the rapid deposition of PDA by using CuSO₄/H₂O₂ as a trigger. Compared to the conventional processes, our strategy shows the fastest deposition rate reported to date, and the PDA coatings exhibit high uniformity and enhanced stability. Furthermore, the PDA‐coated porous membranes have excellent hydrophilicity, anti‐oxidant properties, and antibacterial performance. This work demonstrates a useful method for the environmentally friendly, cost‐effective, and time‐saving fabrication of PDA coatings.     

Preparation and Photocatalytic Activity of Mesoporous TiO2 Photocatalyst Co‐doped with Fe and H3PW12O40

The mesoporous titanium dioxide (MTiO₂) photocatalysts co‐doped with Fe and H₃PW₁₂O₄₀ were synthesized by template method using tetrabutyl titanate (Ti(OC₄H₉)₄), Fe(NO₃)k₃9H₂Oand H₃PW₁₂O₄₀ as precursors and Pluronic P123 as template. The as‐prepared photocatalyst was characterized by N₂ adsorption‐desorption measurements, X‐ray diffraction (XRD), scanning electron microscopy (SEM) and UV‐vis adsorption spectroscopy, and the photocatalytic activities of the prepared samples under UV and visible light were estimated by measuring the degradation rate of methyl blue (MB) (50 mg/L) in an aqueous solution. The characterizations indicated that the photocatalysts possessed a homogeneous pore diameter of ca. 10 nm with high surface area of ca. 150 m²/g. The results of MB photodecomposition showed that co‐doped mesoporous TiO₂ exhibited higher photocatalytic activities than un‐doped, single‐doped mesoporous TiO₂ under UV and visible light irradiation. It was shown that the co‐doped MTiO₂ could be activated by visible light and could thus be used as an effective catalyst in photo‐oxidation reactions. The synergistic effect of Fe and H₃PW₁₂O₄₀ co‐doping played an important role in improving the photocatalytic activity.     

Enhanced Performance of Organic/Inorganic Hybrid Nanomaterials bearing Impregnated [PdL2] Complexes as Counter‐Electrode Catalyst for Dye‐Sensitized Solar Cells

N‐coordinate Pd²⁺ complexes [PdL₂] (L: N‐N‐quinoline‐8‐yl‐R‐benzenesulfonamides) ( 6–10 ) and [PdL₂] complexes assembled on multi‐wall carbon nanotubes (MWCNTs) hybrid nanomaterials were fabricated and characterized by various techniques. The [PdL₂] impregnated MWCNTs materials ( 11–15 ) were applied as a counter electrode (CE) catalyst for triiodide to iodide reduction reaction in the dye‐sensitized solar cells (DSSC) and investigated electro‐catalytic activities. The MWCNTs‐supported [PdL₂] CEs ( 11–15 ) are exhibits as Pt‐free CE with good power conversion efficiencies (PCEs), and compared to platinum and bare MWCNTs CEs and the PCE of bare MWCNTs was clearly improved by means of [PdL₂] complexes ( 6–10 ). The DSSCs based on the hybrid counter electrodes (CEs) ( 11–15 ) and bare MWCNTs are indicated a relative efficiency ( ? _rel ) of 64.27%, 54.07%, 53.75%, 51.52% 44.82% and 27.27% concerning a Pt CE control device set at 100%. The report emphasizes that [PdL₂] impregnated MWCNTs type counter electrodes (CEs) ( 11–15 ) are promising as effectively catalyst in working device design, particularly taking into account the eco‐friendly approach of the hybrids.     

Synthesis and Crystal Structure Determination of [H2‐cryptand 222](Br3)2: A Unique Tribromide Catalyst for the Catalytic Chemoselective N‐Boc Protection of Amines

The organic tribromide, [H₂‐cryptand 222](Br₃)₂ was synthesized and characterized by X‐ray crystallography, and was utilized as an active catalyst for the N‐boc protection of amines. The method is general for the preparation of N‐boc derivatives of aliphatic (acyclic and cyclic), aromatic, primary and secondary amines. We also applied our new reaction protocols for the N‐boc protection of some new amines and spectral and physical data for the obtained products are reported.     

Enhanced Catalytic Activity and SO2/H2O Tolerance for Selective Catalytic Reduction of NOx with NH3 over Titanate Nanotubes Supported MnOx–CeO2 Catalyst at Low Temperature

Catalysis Surveys from Asia - An environment-friendly selective catalytic reduction (SCR) catalyst with high catalytic activity and strong anti-poisoning performance at low temperature is strongly...     

新型CeO2/HBEA催化剂上NH3低温还原NO活性及抗毒性能研究

采用等体积浸渍法制备了CeO2/HBEA催化剂,用于NH3选择性催化还原NO.考察了CeO2负载量、焙烧温度、氧浓度、空速、以及SO2和水蒸气等因素对催化剂活性的影响,并运用BET、X射线衍射(XRD)、扫描电镜(SEM)、热重分析(TGA)、傅里叶红外(FTIR)等手段对该催化剂进行表征,研究了催化剂的晶相、微观形貌与抗毒机制.结果显示:CeO2/HBEA催化剂具有良好的脱硝活性,高活性温度窗口在220～400℃,当反应温度为220℃、空速为12 000 h-1时,NO的转化率达96.49%.H2O的存在对催化剂的脱硝活性无明显影响.SO2一定程度抑制该催化剂的低温脱硝活性,但随着温度的升高,其脱硝活性得到一定恢复.所制备的CeO2/HBEA催化剂有良好的低温活性,能适应较高的空速,且具有较强的抗硫性和抗水中毒性能,有一定的应用前景.     

Synthesis of 2D/2D Structured Mesoporous Co3O4 Nanosheet/N‐Doped Reduced Graphene Oxide Composites as a Highly Stable Negative Electrode for Lithium Battery Applications

Mesoporous Co₃O₄ nanosheets (Co₃O₄‐NS) and nitrogen‐doped reduced graphene oxide (N‐rGO) are synthesized by a facile hydrothermal approach, and the N‐rGO/Co₃O₄‐NS composite is formulated through an infiltration procedure. Eventually, the obtained composites are subjected to various characterization techniques, such as XRD, Raman spectroscopy, surface area analysis, X‐ray photoelectron spectroscopy (XPS), and TEM. The lithium‐storage properties of N‐rGO/Co₃O₄‐NS composites are evaluated in a half‐cell assembly to ascertain their suitability as a negative electrode for lithium‐ion battery applications. The 2D/2D nanostructured mesoporous N‐rGO/Co₃O₄‐NS composite delivered a reversible capacity of about 1305 and 1501 mAh g^?1 at a current density of 80 mA g^?1 for the 1st and 50th cycles, respectively. Furthermore, excellent cyclability, rate capability, and capacity retention characteristics are noted for the N‐rGO/Co₃O₄‐NS composite. This improved performance is mainly related to the existence of mesoporosity and a sheet‐like 2D hierarchical morphology, which translates into extra space for lithium storage and a reduced electron pathway. Also, the presence of N‐rGO and carbon shells in Co₃O₄‐NS should not be excluded from such exceptional performance, which serves as a reliable conductive channel for electrons and act as synergistically to accommodate volume expansion upon redox reactions. Ex‐situ TEM, impedance spectroscopy, and XPS, are also conducted to corroborate the significance of the 2D morphology towards sustained lithium storage.     

Ti0.99Pd0.01O2−δ: A New Pt‐free Catalyst for High Rates of H2+O2 Recombination with High CO Tolerant Capacity

A platinum‐free H ₂ /O ₂ recombination catalyst , Ti_0.99Pd_0.01O_2?δ, is synthesized by a solution combustion method where Pd²⁺ ions adsorb protonic H₂^δ+ ion and oxygen on the oxide ion vacancy sites (see picture). The rate of H₂+O₂ recombination at 50 °C is 15 μmoles g^?1 s^?1, which is much higher than that of Pt‐containing catalysts.

     

CrCl3·6H2O/Hydrogenated Bis‐Schiff Base as a New Efficient Catalyst System for Synthesis of Bis(indoly) Methane

CrCl₃·6H₂O/hydrogenated bis‐Schiff base is found to be an effective catalyst system for synthesis of bis(indoly) methane via electrophilic addition reaction of indoles with aldehydes using acetonitrile as the solvent. The yields of isolated products are from good to excellent.     

A sensitive quantitative assay for the determination of propafenone and two metabolites, 5‐hydroxypropafenone and N‐depropylpropafenone,in human K2EDTA plasma using LC–MS/MS with ESI operated in positive mode

Propafenone is a potent antiarrhythmic agent; clinically propafenone has been used for a number of cardiac arrhythmias because it possesses multiple modes of action, via beta adrenergic receptor blockade and calcium antagonistic activity. Propafenone (PPF) exhibits extensive saturable presystemic biotransformation (first‐pass effect) resulting in two active metabolites: 5‐hydroxypropafenone (5‐OH PPF) formed by CYP2D6 and N‐ depropylpropafenone (NDP) formed by both CYP3A4 and CYP1A2 enzymes. A specific and sensitive LC–MS/MS method was developed and validated for quantitation of PPF, 5‐OH PPF and NDP using turboion spray in a positive ion mode. A solid‐phase extraction was employed for the extraction from human plasma. Chromatographic separation of analytes was achieved using an ACE‐5 C₈ (50 × 4.6 mm) column with a gradient mobile phase comprising ammonium acetate containing 0.01% TFA in purified water and acetonitrile. The retention times achieved were 1.36, 1.23, 1.24 min and 1.34 min for PPF, 5‐OH PPF, NDP and IS (carbamazepine), respectively. Quantitation was performed by monitoring multiple reaction monitoring transition pairs of m /z 342.30 to m /z 116.20, m /z 358.30 to m /z 116.20, m /z 300.30 to m /z 74.20 and m /z 237.20 to m /z 194.10, respectively. The developed method was validated for various parameters. The calibration curves of PPF and 5‐OH PPF showed linearity from 1 to 500 ng/mL, with a lower limit of quantitation of 1.0 ng/mL and for NDP linearity from 0.1 to 25 ng/mL with a lower limit of quantitation of 0.1 ng/mL. The bias and precision for intra‐ and‐inter batch assays were <10 and 5%, respectively. The developed assay was used to evaluate pharmacokinetic properties of propafenone and its major metabolites in healthy human subjects.     

Self‐Assembly of Polyoxometalate‐Supported Ln‐H nydroxo/Oxo Clusters with 1D Extended Structure: [LnIII(H2O)7Cr(OH)6Mo6O18]n·4nH2O (Ln = Ce,Sm, Eu)

Three novel polyoxometalate compounds consisting of Anderson‐type anions and trivalent lanthanide cations, [Ln(H₂O)₇Cr(OH)₆Mo₆O₁₈]_n·4nH₂O (Ln = Ce 1 ; Sm 2 ; Eu 3 ), have been synthesized in aqueous solution and characterized by single crystal X‐ray diffraction, elemental analyses, IR spectra, and TG analyses. Single crystal X‐ray diffractions reveal that the structures of the 1:1 composite compound formed by the heteropolyanion [Cr(OH)₆Mo₆O₁₈]^3? as the building unit and the [Ln(H₂O)₇]³⁺ complex fragment as the linker, which exhibit a type of zig‐zag chain with alternating cations and anions through the Mo‐Ot′‐Ln‐Ot′‐Mo linkage in the crystal. The magnetic properties of 1 ? 3 have been studied by measuring their magnetic susceptibility over the temperature range of 2‐300 K. The UV‐vis spectra of 1 give the Mo‐O and Cr^III‐O charge transfer transitions at 203 and 543 nm, respectively. In addition, the fluorescent characteristic transition of the Eu³⁺ ions in compound 3 is reported.     

Recyclable and reusable NiCl2(PPh3)2/CuI/PEG‐400/H2O system for the sonogashira coupling reaction of aryl iodides with alkynes

A stable and highly efficient NiCl2(PPh₃)₂/CuI/PEG‐400/H₂O catalytic system for the Sonogashira reaction has been developed. In the presence of NiCl₂(PPh₃)₂ and CuI, the coupling reaction of aryl iodides with terminal alkynes was carried out smoothly in a mixture of poly(ethylene glycol) (PEG‐400) and water at 100°C with K₂CO₃ as base to afford a variety of arylacetylenes in good to excellent yields. The isolation of the products was readily performed by extraction with petroleum ether, and the NiCl₂(PPh₃)₂/CuI/PEG‐400/H₂O system could be easily recycled and reused six times without significant loss of catalytic activity. Our system not only avoids the use of easily volatile organic solvents but also solves the basic problem of catalyst reuse. Copyright © 2015 John Wiley & Sons, Ltd.     

Ionic Porous Aromatic Framework as a Self-Degraded Template for the Synthesis of a Magnetic γ-Fe2O3/WO3·0.5H2O Hybrid Nanostructure with Enhanced Photocatalytic Property

An ionic porous aromatic framework is developed as a self-degraded template to synthesize the magnetic heterostructure of γ-Fe₂O₃/WO₃·0.5H₂O. The Fe₃O₄ polyhedron was obtained with the two-phase method first and then reacted with sodium tungstate to form the γ-Fe₂O₃/WO₃·0.5H₂O hybrid nanostructure. Under the induction effect of the ionic porous network, the Fe₃O₄ phase transformed to the γ-Fe₂O₃ state and complexed with WO₃·0.5H₂O to form the n-n heterostructure with the n-type WO₃·0.5H₂O on the surface of n-type γ-Fe₂O₃. Based on a UV-Visible analysis, the magnetic photocatalyst was shown to have a suitable band gap for the catalytic degradation of organic pollutants. Under irradiation, the resulting γ-Fe₂O₃/WO₃·0.5H₂O sample exhibited a removal efficiency of 95% for RhB in 100 min. The charge transfer mechanism was also studied. After the degradation process, the dispersed powder can be easily separated from the suspension by applying an external magnetic field. The catalytic activity displayed no significant decrease after five recycles. The results present new insights for preparing a hybrid nanostructure photocatalyst and its potential application in harmful pollutant degradation.