Multifunctional Active‐Center‐Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost‐effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active‐center‐transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co‐catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co‐catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm^?2 for HER and OER in alkaline medium, respectively.     

Ni3FeN‐Supported Fe3Pt Intermetallic Nanoalloy as a High‐Performance Bifunctional Catalyst for Metal–Air Batteries

Electrocatalysts for both the oxygen reduction and evolution reactions (ORR and OER) are vital for the performances of rechargeable metal–air batteries. Herein, we report an advanced bifunctional oxygen electrocatalyst consisting of porous metallic nickel‐iron nitride (Ni₃FeN) supporting ordered Fe₃Pt intermetallic nanoalloy. In this hybrid catalyst, the bimetallic nitride Ni₃FeN mainly contributes to the high activity for the OER while the ordered Fe₃Pt nanoalloy contributes to the excellent activity for the ORR. Robust Ni₃FeN‐supported Fe₃Pt catalysts show superior catalytic performance to the state‐of‐the‐art ORR catalyst (Pt/C) and OER catalyst (Ir/C). The Fe₃Pt/Ni₃FeN bifunctional catalyst enables Zn–air batteries to achieve a long‐term cycling performance of over 480 h at 10 mA cm⁻² with high efficiency. The extraordinarily high performance of the Fe₃Pt/Ni₃FeN bifunctional catalyst makes it a very promising air cathode in alkaline electrolyte.     

Electrodeposited Cobalt‐Phosphorous‐Derived Films as Competent Bifunctional Catalysts for Overall Water Splitting

One of the challenges to realize large‐scale water splitting is the lack of active and low‐cost electrocatalysts for its two half reactions: H₂ and O₂ evolution reactions (HER and OER). Herein, we report that cobalt‐phosphorous‐derived films (Co‐P) can act as bifunctional catalysts for overall water splitting. The as‐prepared Co‐P films exhibited remarkable catalytic performance for both HER and OER in alkaline media, with a current density of 10 mA cm^?2 at overpotentials of ?94 mV for HER and 345 mV for OER and Tafel slopes of 42 and 47 mV/dec, respectively. They can be employed as catalysts on both anode and cathode for overall water splitting with 100 % Faradaic efficiency, rivalling the integrated performance of Pt and IrO₂. The major composition of the as‐prepared and post‐HER films are metallic cobalt and cobalt phosphide, which partially evolved to cobalt oxide during OER.     

Trimethylaluminum: Bonding by Charge and Current Topology

The charge density distribution of the trimethylaluminum dimer was determined by high‐angle X‐ray diffraction of a single crystal and quantum‐chemical methods and analyzed using the quantum theory of atoms in molecules. The data can be interpreted as Al₂Me₆ being predominantly ionically bonded, with clear indications of topological asymmetry for the bridging Al? C bonds owing to delocalized multicenter bonding. This interpretation is supported by the calculated magnetic response currents. The data shed new light on the bonding situation in this basic organometallic molecule, which was previously described by contradicting interpretations of bonding.     

Catalytic Performance and Characterization of Pt‐Co/Al2O3 Catalysts for CO2 Reforming of CH4 to Synthesis Gas

Pt‐Co/Al₂O₂ catalyst has been studied for CO₂ reforming of CH₄ to synthesis gas. It was found that the catalytic performance of me catalyst was sensitive to calcination temperature. When Co/Al₂O₃ was calcined at 1473 K prior to adding a small amount of Pt to it, the resulting bimetallic catalyst showed high activity, optimal stability and excellent resistance to carbon deposition, which was more effective to the reaction than Co/Al₂O₃ and Pt/Al₂O₃ catalysts. At lower metal loading, catalyst activity decreased in the following order: Pt‐Co/ Al₂O₃ > Pt/Al₂O₃ > Co/Al₂O₃. With 9% Co, the Co/Al₂O₃ calcined at 923 K was also active for CO₂ reforming of CH₄, however, its carbon formation was much more fast man that of the Pt‐Co/Al₂O₃ catalyst. The XRD results indicated that Pt species well dispersed over the bimetallic catalyst. Its high dispersion was related to the presence of CoAl₂O₄, formed during calcining of Co/Al₂O₃ at high temperature before Pt addition. Promoted by Pt, Co/Al₂O₄ in the catalyst could be reduced partially even at 923 K, the temperature of pre‐reduction for the reaction, confirmed by TPR. Based on these results, it was considered that the zerovalent platinum with high dispersion over the catalyst surface and the zerovalent cobalt resulting from Co/Al₂O₄ reduction are responsible for high activity of the Pt‐Co/Al₂O₃ catalyst, and the remain Co/Al₂O₄ is beneficial to suppression of carbon deposition over the catalyst.     

Interface Engineering of MoS2/Ni3S2 Heterostructures for Highly Enhanced Electrochemical Overall‐Water‐Splitting Activity

To achieve sustainable production of H₂ fuel through water splitting, low‐cost electrocatalysts for the hydrogen‐evolution reaction (HER) and the oxygen‐evolution reaction (OER) are required to replace Pt and IrO₂ catalysts. Herein, for the first time, we present the interface engineering of novel MoS₂/Ni₃S₂ heterostructures, in which abundant interfaces are formed. For OER, such MoS₂/Ni₃S₂ heterostructures show an extremely low overpotential of ca. 218 mV at 10 mA cm^?2, which is superior to that of the state‐of‐the‐art OER electrocatalysts. Using MoS₂/Ni₃S₂ heterostructures as bifunctional electrocatalysts, an alkali electrolyzer delivers a current density of 10 mA cm^?2 at a very low cell voltage of ca. 1.56 V. In combination with DFT calculations, this study demonstrates that the constructed interfaces synergistically favor the chemisorption of hydrogen and oxygen‐containing intermediates, thus accelerating the overall electrochemical water splitting.     

Carbon/titanium oxide supported bimetallic platinum/iridium nanocomposites as bifunctional electrocatalysts for lithium-air batteries

Platinum (Pt) and iridium (Ir) catalysts are well known to strongly enhance the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) kinetics, respectively. Pt–Ir-based bimetallic compounds along with carbon-supported titanium oxides (C–TiO₂) have been synthesized for the application as electrocatalysts in lithium oxygen batteries. Transition metal oxide-based bimetallic nanocomposites (Pt–Ir/C–TiO₂) were prepared by an incipient wetness impregnation technique. The as-prepared electrocatalysts were composed of a well-dispersed homogenous alloy of nanoparticles as confirmed by X-ray diffraction patterns and Fourier transform scanning electron microscopy analyses. The electrochemical characterizations reveal that the Pt–Ir/C–TiO₂ electrocatalysts were bifunctional with high activity for both ORR and OER. When applied as an air cathode catalyst in lithium-air batteries, the electrocatalyst improved the battery performance in terms of capacity, reversibility, and cycle life compared to that of cathodes without any catalysts.     

Unusual Metal–Metal Bonding in a Dinuclear Pt–Au Complex: Snapshot of a Transmetalation Process

The dinuclear Pt–Au complex [(CNC)(PPh₃)Pt Au(PPh₃)](ClO₄) ( 2 ) (CNC=2,6‐diphenylpyridinate) was prepared. Its crystal structure shows a rare metal–metal bonding situation, with very short Pt–Au and Au–C_ipso(CNC) distances and dissimilar Pt–C_ipso(CNC) bonds. Multinuclear NMR spectra of 2 show the persistence of the Pt–Au bond in solution and the occurrence of unusual fluxional behavior involving the [Pt^II] and [Au^I] metal fragments. The [Pt^II]??? [Au^I] interaction has been thoroughly studied by means of DFT calculations. The observed bonding situation in 2 can be regarded as a model for an intermediate in a transmetalation process.     

A Universal and Facile Way for the Development of Superior Bifunctional Electrocatalysts for Oxygen Reduction and Evolution Reactions Utilizing the Synergistic Effect

Increasing energy demands have stimulated intense research activities on reversible electrochemical conversion and storage systems with high efficiency, low cost, and environmental benignity. It is highly challenging but desirable to develop efficient bifunctional catalysts for both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). A universal and facile method for the development of bifunctional electrocatalysts with outstanding electrocatalytic activity for both the ORR and OER in alkaline medium is reported. A mixture of Pt/C catalyst with superior ORR activity and a perovskite oxide based catalyst with outstanding OER activity was employed in appropriate ratios, and prepared by simple ultrasonic mixing. Nanosized platinum particles with a wide range of platinum to oxide mass ratios was realized easily in this way. The as‐formed Pt/C–oxide composites showed better ORR activity than a single Pt/C catalyst and better OER activity than a single oxide to bring about much improved bifunctionality (ΔE is only ≈0.8 V for Pt/C–BSCF; BSCF=Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ), due to the synergistic effect. The electronic transfer mechanism and the rate‐determining step and spillover mechanism were two possible origins of such a synergistic effect. Additionally, the phenomenon was found to be universal, although the best performance could be reached at different platinum to oxide mass ratios for different oxide catalysts. This work thus provides an innovative strategy for the development of new bifunctional electrocatalysts with wide application potentials in high‐energy and efficient electrochemical energy storage and conversion.     

A Low‐Temperature Molecular Precursor Approach to Copper‐Based Nano‐Sized Digenite Mineral for Efficient Electrocatalytic Oxygen Evolution Reaction

In the urge of designing noble metal‐free and sustainable electrocatalysts for oxygen evolution reaction (OER), herein, a mineral Digenite Cu₉S₅ has been prepared from a molecular copper(I) precursor, [{(PyHS)₂Cu^I(PyHS)}₂](OTf)₂ ( 1 ), and utilized as an anode material in electrocatalytic OER for the first time. A hot injection of 1 yielded a pure phase and highly crystalline Cu₉S₅, which was then electrophoretically deposited (EPD) on a highly conducting nickel foam (NF) substrate. When assessed as an electrode for OER, the Cu₉S₅/NF displayed an overpotential of merely 298±3 mV at a current density of 10 mA cm^?2 in alkaline media. The overpotential recorded here supersedes the value obtained for the best reported Cu‐based as well as the benchmark precious‐metal‐based RuO₂ and IrO₂ electrocatalysts. In addition, the choronoamperometric OER indicated the superior stability of Cu₉S₅/NF, rendering its suitability as the sustainable anode material for practical feasibility. The excellent catalytic activity of Cu₉S₅ can be attributed to the formation of a crystalline CuO overlayer on the conductive Cu₉S₅ that behaves as active species to facilitate OER. This study delivers a distinct molecular precursor approach to produce highly active copper‐based catalysts that could be used as an efficient and durable OER electro(pre)catalysts relying on non‐precious metals.     

Ultrathin Coating of Confined Pt Nanocatalysts by Atomic Layer Deposition for Enhanced Catalytic Performance in Hydrogenation Reactions

Metal‐support interfaces play a prominent role in heterogeneous catalysis. However, tailoring the metal‐support interfaces to realize full utilization remains a major challenge. In this work, we propose a graceful strategy to maximize the metal‐oxide interfaces by coating confined nanoparticles with an ultrathin oxide layer. This is achieved by sequential deposition of ultrathin Al₂O₃ coats, Pt, and a thick Al₂O₃ layer on carbon nanocoils templates by atomic layer deposition (ALD), followed by removal of the templates. Compared with the Pt catalysts confined in Al₂O₃ nanotubes without the ultrathin coats, the ultrathin coated samples have larger Pt–Al₂O₃ interfaces. The maximized interfaces significantly improve the activity and the protecting Al₂O₃ nanotubes retain the stability for hydrogenation reactions of 4‐nitrophenol. We believe that applying ALD ultrathin coats on confined catalysts is a promising way to achieve enhanced performance for other catalysts.     

SrNb0.1Co0.7Fe0.2O3−δ Perovskite as a Next‐Generation Electrocatalyst for Oxygen Evolution in Alkaline Solution

The perovskite SrNb_0.1Co_0.7Fe_0.2O_3?δ (SNCF) is a promising OER electrocatalyst for the oxygen evolution reaction (OER), with remarkable activity and stability in alkaline solutions. This catalyst exhibits a higher intrinsic OER activity, a smaller Tafel slope and better stability than the state‐of‐the‐art precious‐metal IrO₂ catalyst and the well‐known BSCF perovskite. The mass activity and stability are further improved by ball milling. Several factors including the optimized e_g orbital filling, good ionic and charge transfer abilities, as well as high OH^? adsorption and O₂ desorption capabilities possibly contribute to the excellent OER activity.     

Multifunctional Active-Center-Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost-effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active-center-transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co-catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co-catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm⁻² for HER and OER in alkaline medium, respectively.     

Atomically Dispersed Iron–Nitrogen Species as Electrocatalysts for Bifunctional Oxygen Evolution and Reduction Reactions

Rational design of non‐noble materials as highly efficient, economical, and durable bifunctional catalysts for oxygen evolution and reduction reactions (OER/ORR) is currently a critical obstacle for rechargeable metal‐air batteries. A new route involving S was developed to achieve atomic dispersion of Fe‐N_x species on N and S co‐decorated hierarchical carbon layers, resulting in single‐atom bifunctional OER/ORR catalysts for the first time. The abundant atomically dispersed Fe‐N_x species are highly catalytically active, the hierarchical structure offers more opportunities for active sites, and the electrical conductivity is greatly improved. The obtained electrocatalyst exhibits higher limiting current density and a more positive half‐wave potential for ORR, as well as a lower overpotential for OER under alkaline conditions. Moreover, a rechargeable Zn–air battery device comprising this hybrid catalyst shows superior performance compared to Pt/C catalyst. This work will open a new avenue to design advanced bifunctional catalysts for reversible energy storage and conversion devices.     

Regulating the Spin State of FeIII by Atomically Anchoring on Ultrathin Titanium Dioxide for Efficient Oxygen Evolution Electrocatalysis

Ferric oxides and (oxy)hydroxides, although plentiful and low‐cost, are rarely considered for oxygen evolution reaction (OER) owing to the too high spin state (e_g filling ca. 2.0) suppressing the bonding strength with reaction intermediates. Now, a facile adsorption–oxidation strategy is used to anchor Fe^III atomically on an ultrathin TiO₂ nanobelt to synergistically lower the spin state (e_g filling ca. 1.08) to enhance the adsorption with oxygen‐containing intermediates and improve the electro‐conductibility for lower ohmic loss. The electronic structure of the catalyst is predicted by DFT calculation and perfectly confirmed by experimental results. The catalyst exhibits superior performance for OER with overpotential 270 mV @10 mA cm^?2 and 376 mV @100 mA cm^?2 in alkaline solution, which is much better than IrO₂/C and RuO₂/C and is the best iron‐based OER catalyst free of active metals such as Ni, Co, or precious metals.     

Effect of Oxide Coverage on the Growth of Amorphous Al2Pt Phase on an Al Surface

 In the present experiments the high temperature successive deposition (HTSD) of Al and Pt and the half shadowing technique producing wedge shaped area with increasing quantity of deposited Pt are applied for studying the initial stages of solid phase reaction producing amorphous Al₂Pt phase. The nucleation of Al₂Pt phase results in a decoration pattern which could be related to the characteristic local oxide coverage of the Al crystal surface developing by kinetic segregation of oxygen species during the Al film deposition. In the area of larger amount of deposited Pt, where the Al₂Pt phase is continuous Kirkendall voids are present. The samples were investigated in plane by transmission electron microscopy (TEM) and selected area electron diffraction (SAED) and analysed by energy dispersive X-ray spectroscopy (EDX).     

An Alkyne‐Appended,Click‐Ready PtII Complex with an Unusual Arrangement in the Solid State

To better understand the range of cellular interactions of Pt^II‐based chemotherapeutics, robust and efficient methods to track and analyze Pt targets are needed. A powerful approach is to functionalize Pt^II compounds with alkyne or azide moieties for post‐treatment conjugation through the azide–alkyne cycloaddition (click) reaction. Herein, we report an alkyne‐appended cis‐diamine Pt^II compound, cis‐[Pt(2‐(5‐hexynyl)amido‐1,3‐propanediamine)Cl₂] ( 1 ), the X‐ray crystal structure of which exhibits a combination of unusual radially distributed CH/π(CC) interactions, Pt Pt bonding, and NH:O/NH:Cl hydrogen bonds. In solution, 1 exhibits no Pt alkyne interactions and binds readily to DNA. Subsequent click reactivity with nonfluorescent dansyl azide results in a 70‐fold fluorescence increase. This result demonstrates the potential for this new class of alkyne‐modified Pt compound for the comprehensive detection and isolation of Pt‐bound biomolecules.     

An Alkyne‐Appended,Click‐Ready PtII Complex with an Unusual Arrangement in the Solid State

To better understand the range of cellular interactions of Pt^II‐based chemotherapeutics, robust and efficient methods to track and analyze Pt targets are needed. A powerful approach is to functionalize Pt^II compounds with alkyne or azide moieties for post‐treatment conjugation through the azide–alkyne cycloaddition (click) reaction. Herein, we report an alkyne‐appended cis‐diamine Pt^II compound, cis‐[Pt(2‐(5‐hexynyl)amido‐1,3‐propanediamine)Cl₂] ( 1 ), the X‐ray crystal structure of which exhibits a combination of unusual radially distributed CH/π(C?C) interactions, Pt? Pt bonding, and NH:O/NH:Cl hydrogen bonds. In solution, 1 exhibits no Pt? alkyne interactions and binds readily to DNA. Subsequent click reactivity with nonfluorescent dansyl azide results in a 70‐fold fluorescence increase. This result demonstrates the potential for this new class of alkyne‐modified Pt compound for the comprehensive detection and isolation of Pt‐bound biomolecules.     

A CdII‐Based Metal‐Organic Framework with pcu Topology as Turn‐On Fluorescent Sensor for Al3+

A new metal‐organic framework (MOF) {[Cd₂(bbib)₂(ndc)₂]?2DMF}_n ( JXUST‐1 ) (bbib=1,3‐bis(benzimidazolyl)benzene, H₂ndc=1,4‐naphthalenedicarboxylic acid, DMF=N,N‐dimethylformamide) has been solvothermally synthesized and characterized by single‐crystal X‐ray diffraction, PXRD, TGA, IR and elemental analysis. JXUST‐1 exhibits a three‐dimensional 6‐connected pcu topology with a Schläfli symbol {4¹².6³} constructed by [Cd₂(CO₂)₃] secondary building units. Fluorescence studies show that this MOF can sensitively and selectively recognize Al³⁺ via a fluorescence enhancement effect, and the detection limit is 0.048 ppm. Furthermore, JXUST‐1 displays relatively good thermal and chemical stabilities as well as reusability. All these results suggest JXUST‐1 to be a highly selective and recyclable luminescent sensing material for the detection of Al³⁺.     

Crystal growth in alumina/poly(ethylene terephthalate) nanocomposite films

The crystal growth and morphology in 150‐nm‐thick PET nanocomposite thin films with alumina (Al₂O₃) nanoparticle fillers (38 nm size) were investigated for nanoparticle loadings from 0 to 5 wt %. Transmission electron microscopy of the films showed that at 1 wt % Al₂O₃, the nanoparticles were well dispersed in the film and the average size was close to the reported 38 nm. Above 2 wt % Al₂O₃, the nanoparticles started to agglomerate. The crystal growth and morphological evolution in the PET nanocomposite films kept at an isothermal temperature of 217 °C were monitored as a function of the holding time using in situ atomic force microscopy. It was found that the crystal nucleation and growth of PET was strongly dependent on the dispersed particles in the films. At 1 wt % Al₂O₃, the overall crystal growth rate of PET lamellae was slower than that of the PET homopolymer films. Above 2 wt % Al₂O₃, the crystal growth rate increased with nanoparticle loading because of heterogeneous nucleation. In addition, in these PET nanocomposite thin films, the Al₂O₃ nanoparticles induced preferentially oriented edge‐on lamellae with respect to the surface, which was not the case in unfilled PET as determined by grazing‐incidence X‐ray diffraction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 747–757, 2007