Continuous Porous Aromatic Framework Membranes with Modifiable Sites for Optimized Gas Separation

Continuous microporous membranes are widely studied for gas separation, due to their low energy premium and strong molecular specificity. Porous aromatic frameworks (PAFs) with their exceptional stability and structural flexibility are suited to a wide range of separations. Main-stream PAF-based membranes are usually prepared with polymeric matrices, but their discrete entities and boundary defects weaken their selectivity and permeability. The synthesis of continuous PAF membranes is still a major challenge because PAFs are insoluble. Herein, we successfully synthesized a continuous PAF membrane for gas separation. Both pore size and chemistry of the PAF membrane were modified by ion-exchange, resulting in good selectivity and permeance for the gas mixtures H₂/N₂ and CO₂/N₂. The membrane with Br^? as a counter ion in the framework exhibited a H₂/N₂ selectivity of 72.7 with a H₂ permeance of 51844 gas permeation units (GPU). When the counter ions were replaced by BF₄^?, the membrane showed a CO₂ permeance of 23058 GPU, and an optimized CO₂/N₂ selectivity of 60.0. Our results show that continuous PAF membranes with modifiable pores are promising for various gas separation situations.     

A Uniformly Oriented MFI Membrane for Improved CO2 Separation

Membrane separation of CO₂ from natural gas, biogas, synthesis gas, and flu gas is a simple and energy‐efficient alternative to other separation techniques. But results for CO₂‐selective permeance have always been achieved by randomly oriented and thick zeolite membranes. Thin, oriented membranes have great potential to realize high‐flux and high‐selectivity separation of mixtures at low energy cost. We now report a facile method for preparing silica MFI membranes in fluoride media on a graded alumina support. In the resulting membrane straight channels are uniformly vertically aligned and the membrane has a thickness of 0.5 μm. The membrane showed a separation selectivity of 109 for CO₂/H₂ mixtures and a CO₂ permeance of 51×10^?7 mol m^?2 s^?1 Pa^?1 at ?35 °C, making it promising for practical CO₂ separation from mixtures.     

Co3(HCOO)6 microporous metal-organic framework membrane for separation of CO2/CH4 mixtures

Continuous metal–organic framework‐type Co₃(HCOO)₆ intergrown films with a one‐dimensional zigzag channel system and pore aperture of 5.5 Å are prepared by secondary growth on preseeded macroporous glass‐frit disks and silicon wafers. The adsorption behavior of CO₂ or CH₄ single gases on the Co₃(HCOO)₆ membrane is investigated by in situ IR spectroscopy. It is shown that the isosteric heats of adsorption for CO₂ (17.7 kJ mol^?1) and CH₄ (14.4 kJ mol^?1) do not vary with increasing amount of adsorbed gases. The higher value of isosteric heat for CO₂ is an indication of the stronger interaction between the CO₂ and the Co₃(HCOO)₆ membrane. The Co₃(HCOO)₆ membrane is studied by binary gas permeation of CO₂ and CH₄ at different temperatures (0, 25, and 60 °C). The membrane has CO₂/CH₄ selectivity with a separation factor higher than 10, which is due to the unique structure and molecular sieving effect. Upon increasing the temperature from 0 to 60 °C, the preferred permeance of CO₂ over CH₄ is increased from 1.70×10^?6 to 2.09×10^?6 mol m^?2 s^?1 Pa^?1, while the separation factor for CO₂/CH₄ shows a corresponding decrease from 15.95 to 10.37. The effective pore size of the Co₃(HCOO)₆ material combined with the pore shape do not allow the two molecules to pass simultaneously, and once the CO₂ molecules are diffused in the micropores, the CH₄ is blocked. The supported Co₃(HCOO)₆ membrane retains high mechanical stability after a number of thermal cycles.     

Multiscale Computational Study on the Adsorption and Separation of CO2/CH4 and CO2/H2 on Li+‐Doped Mixed‐Ligand Metal–Organic Framework Zn2(NDC)2(diPyNI)

The quantum mechanics (QM) method and grand canonical Monte Carlo (GCMC) simulations are used to study the effect of lithium cation doping on the adsorption and separation of CO₂, CH₄, and H₂ on a twofold interwoven metal–organic framework (MOF), Zn₂(NDC)₂(diPyNI) (NDC=2,6‐naphthalenedicarboxylate; diPyNI=N,N′‐di‐(4‐pyridyl)‐1,4,5,8‐naphthalenetetracarboxydiimide). Second‐order Moller–Plesset (MP2) calculations on the (Li⁺–diPyNI) cluster model show that the energetically most favorable lithium binding site is above the pyridine ring side at a distance of 1.817 Å from the oxygen atom. The results reveal that the adsorption capacity of Zn₂(NDC)₂(diPyNI) for carbon dioxide is higher than those of hydrogen and methane at room temperature. Furthermore, GCMC simulations on the structures obtained from QM calculations predict that the Li⁺‐doped MOF has higher adsorption capacities than the nondoped MOF, especially at low pressures. In addition, the probability density distribution plots reveal that CO₂, CH₄, and H₂ molecules accumulate close to the Li cation site. The selectivity results indicate that CO₂/H₂ selectivity values in Zn₂(NDC)₂(diPyNI) are higher than those of CO₂/CH₄. The selectivity of CO₂ over CH₄ on Li⁺‐doped Zn₂(NDC)₂(diPyNI) is improved relative to the nondoped MOF.     

Comparison of Gas Sorption Properties of Neutral and Anionic Metal–Organic Frameworks Prepared from the Same Building Blocks but in Different Solvent Systems

Two different 3D porous metal–organic frameworks, [Zn₄O(NTN)₂]?10 DMA?7 H₂O ( SNU‐150 ) and [Zn₅(NTN)₄(DEF)₂][NH₂(C₂H₅)₂]₂?8 DEF?6 H₂O ( SNU‐151 ), are synthesized from the same metal and organic building blocks but in different solvent systems, specifically, in the absence and the presence of a small amount of acid. SNU‐150 is a doubly interpenetrated neutral framework, whereas SNU‐151 is a non‐interpenetrated anionic framework containing diethylammonium cations in the pores. Comparisons of the N₂, H₂, CO₂, and CH₄ gas adsorption capacities as well as the CO₂ adsorption selectivity over N₂ and CH₄ in desolvated SNU‐150′ (BET: 1852 m² g^?1) and SNU‐151′ (BET: 1563 m² g^?1) samples demonstrate that the charged framework is superior to the neutral framework for gas storage and gas separation, despite its smaller surface area and different framework structure.     

Three novel topologically different metal–organic frameworks built from 3‐nitro‐4‐(pyridin‐4‐yl)benzoic acid

The design and synthesis of metal–organic frameworks (MOFs) have attracted much interest due to the intriguing diversity of their architectures and topologies. However, building MOFs with different topological structures from the same ligand is still a challenge. Using 3‐nitro‐4‐(pyridin‐4‐yl)benzoic acid (HL) as a new ligand, three novel MOFs, namely poly[[(N,N‐dimethylformamide‐κO)bis[μ₂‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ³O,O′:N]cadmium(II)] N,N‐dimethylformamide monosolvate methanol monosolvate], {[Cd(C₁₂H₇N₂O₄)₂(C₃H₇NO)]·C₃H₇NO·CH₃OH}_n, ( 1 ), poly[[(μ₂‐acetato‐κ²O:O′)[μ₃‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ³O:O′:N]bis[μ₃‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ⁴O,O′:O′:N]dicadmium(II)] N,N‐dimethylacetamide disolvate monohydrate], {[Cd₂(C₁₂H₇N₂O₄)₃(CH₃CO₂)]·2C₄H₉NO·H₂O}_n, ( 2 ), and catena‐poly[[[diaquanickel(II)]‐bis[μ₂‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ²O:N]] N,N‐dimethylacetamide disolvate], {[Ni(C₁₂H₇N₂O₄)₂(H₂O)₂]·2C₄H₉NO}_n, ( 3 ), have been prepared. Single‐crystal structure analysis shows that the Cd^II atom in MOF ( 1 ) has a distorted pentagonal bipyramidal [CdN₂O₅] coordination geometry. The [CdN₂O₅] units as 4‐connected nodes are interconnected by L^? ligands to form a fourfold interpenetrating three‐dimensional (3D) framework with a dia topology. In MOF ( 2 ), there are two crystallographically different Cd^II ions showing a distorted pentagonal bipyramidal [CdNO₆] and a distorted octahedral [CdN₂O₄] coordination geometry, respectively. Two Cd^II ions are connected by three carboxylate groups to form a binuclear [Cd₂(COO)₃] cluster. Each binuclear cluster as a 6‐connected node is further linked by acetate groups and L^? ligands to produce a non‐interpenetrating 3D framework with a pcu topology. MOF ( 3 ) contains two crystallographically distinct Ni^II ions on special positions. Each Ni^II ion adopts an elongated octahedral [NiN₂O₄] geometry. Each Ni^II ion as a 4‐connected node is linked by L^? ligands to generate a two‐dimensional network with an sql topology, which is further stabilized by two types of intermolecular OW—HW…O hydrogen bonds to form a 3D supramolecular framework. MOFs ( 1 )–( 3 ) were also characterized by powder X‐ray diffraction, IR spectroscopy and thermogravimetic analysis. Furthermore, the solid‐state photoluminescence of HL and MOFs ( 1 ) and ( 2 ) have been investigated. The photoluminescence of MOFs ( 1 ) and ( 2 ) are enhanced and red‐shifted with respect to free HL. The gas adsorption investigation of MOF ( 2 ) indicates a good separation selectivity (71) of CO₂/N₂ at 273 K (i.e. the amount of CO₂ adsorption is 71 times higher than N₂ at the same pressure).     

Xenon Recovery by DD3R Zeolite Membranes: Application in Anaesthetics

Xe is only produced by cryogenic distillation of air, and its availability is limited by the extremely low abundance. Therefore, Xe recovery after usage is the only way to guarantee sufficient supply and broad application. Herein we demonstrate DD3R zeolite as a benchmark membrane material for CO₂/Xe separation. The CO₂ permeance after an optimized membrane synthesis is one order magnitude higher than for conventional membranes and is less susceptible to water vapour. The overall membrane performance is dominated by diffusivity selectivity of CO₂ over Xe in DD3R zeolite membranes, whereby rigidity of the zeolite structure plays a key role. For relevant anaesthetic composition (<5 % CO₂) and condition (humid), CO₂ permeance and CO₂/Xe selectivity stabilized at 2.0×10^?8 mol m^?2 s^?1 Pa^?1 and 67, respectively, during long‐term operation (>320 h). This endows DD3R zeolite membranes great potential for on‐stream CO₂ removal from the Xe‐based closed‐circuit anesthesia system. The large cost reduction of up to 4 orders of magnitude by membrane Xe‐recycling (>99+%) allows the use of the precious Xe as anaesthetics gas a viable general option in surgery.     

Cu3(hexaiminotriphenylene)2: An Electrically Conductive 2D Metal–Organic Framework for Chemiresistive Sensing

The utility of metal–organic frameworks (MOFs) as functional materials in electronic devices has been limited to date by a lack of MOFs that display high electrical conductivity. Here, we report the synthesis of a new electrically conductive 2D MOF, Cu₃(HITP)₂ (HITP=2,3,6,7,10,11‐hexaiminotriphenylene), which displays a bulk conductivity of 0.2 S cm^?1 (pellet, two‐point‐probe). Devices synthesized by simple drop casting of Cu₃(HITP)₂ dispersions function as reversible chemiresistive sensors, capable of detecting sub‐ppm levels of ammonia vapor. Comparison with the isostructural 2D MOF Ni₃(HITP)₂ shows that the copper sites are critical for ammonia sensing, indicating that rational design/synthesis can be used to tune the functional properties of conductive MOFs.     

Tuning CO2 Uptake and Reversible Iodine Adsorption in Two Isoreticular MOFs through Ligand Functionalization

The synthesis and characterization of two isoreticular metal–organic frameworks (MOFs), {[Cd(bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 1 ) and {[Cd(2‐NH₂bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 2 ) [bdc=benzene dicarboxylic acid; 2‐NH₂bdc=2‐amino benzene dicarboxylic acid; 4‐bpmh=N,N‐bis‐pyridin‐4‐ylmethylene‐hydrazine], are reported. Both compounds possess similar two‐fold interpenetrated 3D frameworks bridged by dicarboxylates and a 4‐bpmh linker. The 2D Cd‐dicarboxylate layers are extended along the a‐axis to form distorted square grids which are further pillared by 4‐bpmh linkers to result in a 3D pillared‐bilayer interpenetrated framework. Gas adsorption studies demonstrate that the amino‐functionalized MOF 2 shows high selectivity for CO₂ (8.4 wt % 273 K and 7.0 wt % 298 K) over CH₄, and the uptake amounts are almost double that of non‐functional MOF 1 . Iodine (I₂) adsorption studies reveal that amino‐functionalized MOF 2 exhibits a faster I₂ adsorption rate and controlled delivery of I₂ over the non‐functionalized homolog 1 .     

Studies on the nuclease activity and interactions of the mixed‐polypyridyl [Ni2(1,3‐tpbd)(diimine)2(H2O)2]4+ complexes with thioredoxin reductase

Three new nickel(II) complexes formulated as [Ni₂(1,3‐tpbd)(diimine)₂(H₂O)₂]⁴⁺ [1,3‐tpbd = N,N,N′,N′‐tetrakis(2‐pyridylmethyl)benzene‐1,3‐diamine, where diimine is an N,N‐donor heterocyclic base like 1,10‐phenanthroline (phen),2,2′‐bipyridine (bpy), 4,5‐diazafluoren‐9‐one (dafo)], have been synthesized and structurally characterized by X‐ray crystallography: [Ni₂(1,3‐tpbd)(phen)₂(H₂O)₂]⁴⁺ (1), [Ni₂(1,3‐tpbd)(bpy)₂(H₂O)₂]⁴⁺(2) and [Ni₂(1,3‐tpbd)(dafo)₂(H₂O)₂]⁴⁺ (3). Single‐crystal diffraction reveals that the metal atoms in the complexes are all in a distorted octahedral geometry and in a trans arrangement around 1,3‐tpbd ligand. The interactions of the three complexes with calf thymus DNA (CT‐DNA) have been investigated by UV absorption, fluorescence spectroscopy, circular dichroism and viscosity. The apparent binding constant (K_app) values are calculated to be 1.91 × 10⁵ m ^?1 for 1, 1.18 × 10⁵ m ^?1 for 2, and 1.35 × 10⁵ m ^?1 for 3, following the order 1 > 3 > 2. The higher DNA binding affinity of 1 is due to the involvement in partial insertion of the phen ring between the DNA base pairs. A decrease in relative viscosities of DNA upon binding to 1–3 is consistent with the DNA binding affinities. These complexes efficiently display oxidative cleavage of supercoiled DNA in the presence of H₂O₂ (250 µ m ), with 3 exhibiting the highest nuclease activity. The rate constants for the conversion of supercoiled to nicked DNA are 5.28 × 10^?5 s^?1 (for 1), 6.67 × 10^?5 s^?1 (for 2) and 1.39 × 10^?4 s^?1 (for 3), also indicating that complex 3 shows higher catalytic activity than 1 and 2. Here the nuclease activity is not readily correlated to binding affinity. The inhibitory effect of complexes 1–3 on thioredoxin reductase has also been examined. The IC₅₀ values are calculated to be 26.54 ± 0.57, 31.03 ± 3.33 and 8.69 ± 2.54 µ m , respectively, showing a more marked inhibitory effect on thioredoxin reductase by complex 3 than the other two complexes. Copyright © 2012 John Wiley & Sons, Ltd.     

Water‐stable Adenine‐based MOFs with Polar Pores for Selective CO2 Capture

Here, we report two novel water‐stable amine‐functionalized MOFs, namely IISERP‐MOF26 ([NH₂(CH₃)₂][Cu₂O(Ad)(BDC)]?(H₂O)₂(DMA), 1 ) and IISERP‐MOF27 ([NH₂(CH₃)₂]_1/2[Zn₄O(Ad)₃(BDC)₂]?(H₂O)₂(DMF)_1/2, 2 ), which show selective CO₂ capture capabilities. They are made by combining inexpensive and readily available terephthalic acid and N‐rich adenine with Cu and Zn, respectively. They possess 1D channels decorated by the free amine group from the adenine and the polarizing oxygen atoms from the terephthalate units. Even more, there are dimethyl ammonium (DMA⁺) cations in the pore rendering an electrostatic environment within the channels. The activated Cu‐ and Zn‐MOFs physisorb about 2.7 and 2.2 mmol g^?1 of CO₂, respectively, with high CO₂/N₂ and moderate CO₂/CH₄ selectivity. The calculated heat of adsorption (HOA=21–23 kJ mol^?1) for the CO₂ in both MOFs suggest optimal physical interactions which corroborate well with their facile on‐off cycling of CO₂. Notably, both MOFs retain their crystallinity and porosity even after soaking in water for 24 hours as well as upon exposure to steam over 24 hours. The exceptional thermal and chemical stability, favorable CO₂ uptakes and selectivity and low HOA make these MOFs promising sorbents for selective CO₂ capture applications. However, the MOF′s low heat of adsorption despite having a highly CO₂‐loving groups lined walls is quite intriguing.     

A Cationic MOF with High Uptake and Selectivity for CO2 due to Multiple CO2‐Philic Sites

The reaction of N‐rich pyrazinyl triazolyl carboxyl ligand 3‐(4‐carboxylbenzene)‐5‐(2‐pyrazinyl)‐1H‐1,2,4‐triazole (H₂cbptz) with MnCl₂ afforded 3D cationic metal–organic framework (MOF) [Mn₂(Hcbptz)₂(Cl)(H₂O)]Cl ? DMF ? 0.5 CH₃CN ( 1 ), which has an unusual (3,4)‐connected 3,4T1 topology and 1D channels composed of cavities. MOF 1 has a very polar framework that contains exposed metal sites, uncoordinated N atoms, narrow channels, and Cl^? basic sites, which lead to not only high CO₂ uptake, but also remarkably selective adsorption of CO₂ over N₂ and CH₄ at 298–333 K. The multiple CO₂‐philic sites were identified by grand canonical Monte Carlo simulations. Moreover, 1 shows excellent stability in natural air environment. These advantages make 1 a very promising candidate in post‐combustion CO₂ capture, natural‐gas upgrading, and landfill gas‐purification processes.     

Post‐Synthetic Reversible Incorporation of Organic Linkers into Porous Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations and Modification of Gas‐Sorption Properties

The porous metal–organic framework (MOF) {[Zn₂(TCPBDA)(H₂O)₂]?30 DMF?6 H₂O}_n ( SNU‐30 ; DMF=N,N‐dimethylformamide) has been prepared by the solvothermal reaction of N,N,N′,N′‐tetrakis(4‐carboxyphenyl)biphenyl‐4,4′‐diamine (H₄TCPBDA) and Zn(NO₃)₂?6 H₂O in DMF/tBuOH. The post‐synthetic modification of SNU‐30 by the insertion of 3,6‐di(4‐pyridyl)‐1,2,4,5‐tetrazine (bpta) affords single‐crystalline {[Zn₂(TCPBDA)(bpta)]?23 DMF?4 H₂O}_n ( SNU‐31 SC ), in which channels are divided by the bpta linkers. Interestingly, unlike its pristine form, the bridging bpta ligand in the MOF is bent due to steric constraints. SNU‐31 can be also prepared through a one‐pot solvothermal synthesis from Zn^II, TCPBDA^4?, and bpta. The bpta linker can be liberated from this MOF by immersion in N,N‐diethylformamide (DEF) to afford the single‐crystalline SNU‐30 SC , which is structurally similar to SNU‐30 . This phenomenon of reversible insertion and removal of the bridging ligand while preserving the single crystallinity is unprecedented in MOFs. Desolvated solid SNU‐30′ adsorbs N₂, O₂, H₂, CO₂, and CH₄ gases, whereas desolvated SNU‐31′ exhibits selective adsorption of CO₂ over N₂, O₂, H₂, and CH₄, thus demonstrating that the gas adsorption properties of MOF can be modified by post‐synthetic insertion/removal of a bridging ligand.     

High‐Efficiency Oxygen Reduction to Hydrogen Peroxide Catalyzed by Nickel Single‐Atom Catalysts with Tetradentate N2O2 Coordination in a Three‐Phase Flow Cell

Carbon‐supported Ni^II single‐atom catalysts with a tetradentate Ni‐N₂O₂ coordination formed by a Schiff base ligand‐mediated pyrolysis strategy are presented. A Ni^II complex of the Schiff base ligand (R,R)‐(?)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediamine was adsorbed onto a carbon black support, followed by pyrolysis of the modified carbon material at 300 °C in Ar. The Ni‐N₂O₂/C catalyst showed excellent performance for the electrocatalytic reduction of O₂ to H₂O₂ through a two‐electron transfer process in alkaline conditions, with a H₂O₂ selectivity of 96 %. At a current density of 70 mA cm^?2, a H₂O₂ production rate of 5.9 mol g_cat.^?1 h^?1 was achieved using a three‐phase flow cell, with good catalyst stability maintained over 8 h of testing. The Ni‐N₂O₂/C catalyst could electrocatalytically reduce O₂ in air to H₂O₂ at a high current density, still affording a high H₂O₂ selectivity (>90 %). A precise Ni‐N₂O₂ coordination was key to the performance.     

A Flexible Pro‐porous Coordination Polymer: Non‐conventional Synthesis and Separation Properties Towards CO2/CH4 Mixtures

The novel coordination polymers [Cu(Hoxonic)(H₂O)]_n ( 1 ) and [Cu(Hoxonic)(bpy)_0.5]_n ? 1.5 n H₂O ( 2?H₂O ) (H₃oxonic: 4,6‐dihydroxy‐1,3,5‐triazine‐2‐carboxylic acid; bpy: 4,4′‐bipyridine) have been isolated and structurally characterised by ab initio X‐ray powder diffraction. The dense phase 1 contains 1D zig‐zag chains in which Hoxonic dianions bridge square‐pyramidal copper(II) ions, apically coordinated by water molecules. On the contrary, 2?H₂O , prepared by solution and solventless methods, is based on 2D layers of octahedral copper(II) ions bridged by Hoxonic ligands, further pillared by bpy spacers. The resulting pro‐porous 3D network possesses small hydrated cavities. The reactivity, thermal, magnetic and adsorptive properties of these materials have been investigated. Notably, the adsorption studies on 2 show that this material possesses unusual adsorption behaviour. Indeed, guest uptake is facilitated by increasing the thermal energy of both the guest and the framework. Thus, neither N₂ at 77 K nor CO₂ at 195 K are incorporated, and CH₄ is only minimally adsorbed at 273 K and high pressures (0.5 mmol g^?1 at 2500 kPa). By contrast, CO₂ is readily incorporated at 273 K (up to 2.5 mmol g^?1 at 2500 kPa). The selectivity of 2 towards CO₂ over CH₄ has been investigated by means of variable‐temperature zero coverage adsorption experiments and measurement of breakthrough curves of CO₂/CH₄ mixtures. The results show the highly selective incorporation of CO₂ in 2 , which can be rationalised on the basis of the framework flexibility and polar nature of its voids.     

Interplay of Magnetic Exchange Interactions and Ni?S?Ni Bond Angles in Polynuclear Nickel(II) Complexes

The ability of bridging thiophenolate groups (RS^?) to transmit magnetic exchange interactions between paramagnetic Ni^II ions is examined. Specific attention is paid to complexes with large Ni? SR? Ni angles. For this purpose, dinuclear [Ni₂L¹(μ‐OAc)?I₂][I₅] ( 2 ) and trinuclear [Ni₃L²(OAc)₂][BPh₄]₂ ( 3 ), where H₂L¹ and H₂L² represent 24‐membered macrocyclic amino‐thiophenol ligands, are prepared and fully characterized by IR‐ and UV/Vis spectroscopy, X‐ray crystallography, static magnetization M measurements and high‐field electron spin resonance (HF‐ESR). The dinuclear complex 2 has a central N₃Ni₂(μ‐S)₂(μ‐OAc)Ni₂N₃ core with a mean Ni? S? Ni angle of 92°. The macrocycle L² supports a trinuclear complex 3 , with distorted octahedral N₂O₂S₂ and N₂O₃S coordination environments for one central and two terminal Ni^II ions, respectively. The Ni? S? Ni angles are at 132.8° and 133.5°. We find that the variation of the bond angles has a very strong impact on the magnetic properties of the Ni complexes. In the case of the Ni₂‐complex, temperature T and magnetic field B dependencies of M reveal a ferromagnetic coupling J=?29 cm^?1 between two Ni^II ions (H=JS₁S₂). HF‐ESR measurements yield a negative axial magnetic anisotropy (D<0) which implies a bistable (easy axis) magnetic ground state. In contrast, for the Ni₃‐complex we find an appreciable antiferromagnetic coupling J′=97 cm^?1 between the Ni^II ions and a positive axial magnetic anisotropy (D>0) which implies an easy plane situation.     

Composite hollow fiber membranes for CO2 capture

Composite hollow fibers membranes were prepared by coating poly(phenylene oxide) (PPO) and polysulfone (PSf) hollow fibers with high molecular polyvinylamine (PVAm). Two procedures of coating hollow fibers outside and respective inside were investigated with respect to intrinsic PVAm solution properties and hollow fibers geometry and material.The influence of operating mode (sweep or vacuum) on the performances of membranes was investigated. Vacuum operating mode gave better results than using sweep because part of the sweep gas permeated into feed and induced an extra resistance to the most permeable gas the CO₂. The composite PVAm/PSf HF membranes having a 0.7–1.5 μm PVAm selective layer, showed CO₂/N₂ selectivity between 100 and 230. The selectivity was attributed to the CO₂ facilitated transport imposed by PVAm selective layer. The CO₂ permeance changed from 0.006 to 0.022 m³(STP)/(m² bar h) in direct correlation with CO₂ permeance and separation mechanism of the individual porous supports used for membrane fabrication. The multilayer PVAm/PPO membrane using as support PPO hollow fibers with a 40 nm PPO dense skin layer, surprisingly presented an increase in selectivity with the increase in CO₂ partial pressure. This trend was opposite to the facilitated transport characteristic behaviour of PVAm/porous PSf. This indicated that PVAm/PPO membrane represents a new membrane, with new properties and a hybrid mechanism, extremely stable at high pressure ratios. The CO₂/N₂ selectivity ranged between 20 and 500 and the CO₂ permeance from 0.11 to 2.3 m³(STP)/(m² bar h) depending on the operating conditions.For both PVAm/PSf and PVAm/PPO membranes, the CO₂ permeance was similar with the CO₂ permeance of uncoated hollow fiber supports, confirming that the CO₂ diffusion rate limiting step resides in the properties of the relatively thick support, not at the level of 1.2 μm thin and water swollen PVAm selective layer. A dynamic transfer of the CO₂ diffusion rate limiting step between PVAm top layer and PPO support was observed by changing the feed relative humidity (RH%). The CO₂ diffusion rate was controlled by the PPO support when using humid feed. At low feed humidity the 1.2 μm PVAm top layer becomes the CO₂ diffusion rate limiting step.     

Flexible and Rigid Amine‐Functionalized Microporous Frameworks Based on Different Secondary Building Units: Supramolecular Isomerism,Selective CO2 Capture,and Catalysis

We report the synthesis, structural characterization, and porous properties of two isomeric supramolecular complexes of ([Cd(NH₂?bdc)(bphz)_0.5]?DMF?H₂O}_n (NH₂?bdc=2‐aminobenzenedicarboxylic acid, bphz=1,2‐bis(4‐pyridylmethylene)hydrazine) composed of a mixed‐ligand system. The first isomer, with a paddle‐wheel‐type Cd₂(COO)₄ secondary building unit (SBU), is flexible in nature, whereas the other isomer has a rigid framework based on a μ‐oxo‐bridged Cd₂(μ‐OCO)₂ SBU. Both frameworks are two‐fold interpenetrated and the pore surface is decorated with pendant ?NH₂ and ?N?N? functional groups. Both the frameworks are nonporous to N₂, revealed by the type II adsorption profiles. However, at 195 K, the first isomer shows an unusual double‐step hysteretic CO₂ adsorption profile, whereas the second isomer shows a typical type I CO₂ profile. Moreover, at 195 K, both frameworks show excellent selectivity for CO₂ among other gases (N₂, O₂, H₂, and Ar), which has been correlated to the specific interaction of CO₂ with the ?NH₂ and ?N?N? functionalized pore surface. DFT calculations for the oxo‐bridged isomer unveiled that the ?NH₂ group is the primary binding site for CO₂. The high heat of CO₂ adsorption (ΔH_ads=37.7 kJ mol^?1) in the oxo‐bridged isomer is realized by NH₂???CO₂/aromatic π???CO₂ and cooperative CO₂???CO₂ interactions. Further, postsynthetic modification of the ?NH₂ group into ?NHCOCH₃ in the second isomer leads to a reduced CO₂ uptake with lower binding energy, which establishes the critical role of the ?NH₂ group for CO₂ capture. The presence of basic ?NH₂ sites in the oxo‐bridged isomer was further exploited for efficient catalytic activity in a Knoevenagel condensation reaction.     

Two Robust Porous Metal–Organic Frameworks Sustained by Distinct Catenation: Selective Gas Sorption and Single‐Crystal‐to‐Single‐Crystal Guest Exchange

Assembly of copper(I) halide with a new tripodal ligand, benzene‐1,3,5‐triyl triisonicotinate (BTTP4), afforded two porous metal–organic frameworks, [Cu₂I₂(BTTP4)]?2 CH₃CN ( 1? 2 CH₃CN) and [CuBr(BTTP4)]?(CH₃CN ? CHCl₃ ? H₂O) ( 2? solvents), which have been characterized by IR spectroscopy, thermogravimetry (TG), single‐crystal, and powder X‐ray diffraction (PXRD) methods. Compound 1.CH3CN is a polycatenated 3D framework that consists of 2D (6,3) networks through inclined catenation, whereas 2 is a doubly interpenetrated 3D framework possessing the ThSi₂‐type ( ths ) (10,3)‐b topology. Both frameworks contain 1D channels of effective sizes 9×12 and 10×10 Ų, which amounts to 43 and 40 % space volume accessible for solvent molecules, respectively. The TG and variable‐temperature PXRD studies indicated that the frameworks can be completely evacuated while retaining the permanent porosity, which was further verified by measurement of the desolvated complex [Cu₂I₂(BTTP4)] ( 1′ ). The subsequent guest‐exchange study on the solvent‐free framework revealed that various solvent molecules can be adsorbed through a single‐crystal‐to‐single‐crystal manner, thus giving rise to the guest‐captured structures [Cu₂I₂(BTTP4)]?C₆H₆ ( 1.benzene ), [Cu₂I₂(BTTP4)]?2 C₇H₈ ( 1.2toluene ), and [Cu₂I₂(BTTP4)]?2 C₈H₁₀ ( 1.2ethyl benzene ). The gas‐adsorption investigation disclosed that two kinds of frameworks exhibited comparable CO₂ storage capacity (86–111 mL g^?1 at 1 atm) but nearly none for N₂ and H₂, thereby implying its separation ability of CO₂ over N₂ and H₂. The vapor‐adsorption study revealed the preferential inclusion of aromatic guests over nonaromatic solvents by the empty framework, which is indicative of selectivity toward benzene over cyclohexane.     

New Nanostructured Materials: Synthesis of Dodecanuclear NiII Complexes and Surface Deposition Studies

Microwave‐assisted synthesis has been used to obtain the family of dodecanuclear Ni^II complexes [Ni₁₂(NO₃)(MeO)₁₂(MeC₆H₄CO₂)₉(MeOH)₁₀(H₂O)₂][ClO₄]₂ ( 1 ), [Ni₁₂(NO₃)(MeO)₁₂(BrC₆H₄CO₂)₉(MeOH)₁₀(H₂O)₂][ClO₄]₂ ( 2 ), [Ni₁₂(CO₃)(MeO)₁₂(MeC₆H₄CO₂)₉(MeOH)₁₀(H₂O)₂]₂[SO₄] ( 3 ) and [Ni₁₂(NO₃)(MeO)₁₂(MeC₆H₄CO₂)₉(MeOH)₈(H₂O)₇][NO₃]₂ ( 4 ). They contain three {Ni₄O₄} cubane units which template around a central μ₆ anion, either NO₃^? or CO₃^2?. Their magnetic properties have been studied by superconducting quantum interference device (SQUID) magnetometry and high‐field EPR measurements. The nanostructuration of the Ni₁₂ species on mica surfaces is studied by AFM and grazing‐incidence X‐ray diffraction, which reveal the formation of polycrystalline thin layers.