Thermoresponsive Supramolecular Dendronized Polymers

Combining the concepts of supramolecular polymers and dendronized polymers provides the opportunity to create bulky polymers with easy structural modification and tunable properties. In the present work, a novel class of side‐chain supramolecular dendronized polymethacrylates is prepared through the host–guest interaction. The host is a linear polymethacrylate (as the backbone) attached in each repeat unit with a β‐cyclodextrin (β‐CD) moiety, and the guest is constituted with three‐fold branched oligoethylene glycol (OEG)‐based first‐ (G1) and second‐generation (G2) dendrons with an adamantyl group core. The host and guest interaction in aqueous solution leads to the formation of the supramolecular polymers, which is supported with ¹H NMR spectroscopy and dynamic light scattering measurements. The supramolecular formation was also examined at different host/guest ratios. The water solubility of hosts and guests increases upon supramolecular formation. The supramolecular polymers show good solubility in water at room temperature, but exhibit thermoresponsive behavior at elevated temperatures. Their thermoresponsiveness is thus investigated with UV/Vis and ¹H NMR spectroscopy, and compared with their counterparts formed from individual β‐CD and the OEG dendritic guest. The effect of polymer concentration and molar ratio of host/guest was examined. It is found that the polar interior of the supramolecules contribute significantly to the thermally‐induced phase transitions for the G1 polymer, but this effect is negligible for the G2 polymer. Based on the temperature‐varied proton NMR spectra, it is found that the host–guest complex starts to decompose during the aggregation process upon heating to its dehydration temperature, and this decomposition is enhanced with an increase of solution temperature.     

Synergistic Assembly of Covalent and Supramolecular Polymers

Integrating irreplaceable features of both covalent chemistry and noncovalent interactions into a single entity to maximize the applicability is highly desired. Here, a discovery of this type of hybrid, developed by Stupp and co‐workers, is developed, where a synergistic combination of covalent and noncovalent compartments enables them to assemble by each other perfectively. The covalent compartments can grow into polymer chains assisted by a supramolecular compartment. The supramolecular compartments can be reversibly removed and re‐formed to reconstitute the hybrid structure. The obtained soft materials can serve as functional platforms for molecular delivery or self‐repairing materials.

     

Metal Coordination Stoichiometry Controlled Formation of Linear and Hyperbranched Supramolecular Polymers

Controlling the topologies of polymers is a hot topic in polymer chemistry because the physical and/or chemical properties of polymers are determined (at least partially) by their topologies. This study exploits the host–guest interactions between dibenzo‐24‐crown‐8 and secondary ammonium salts and metal coordination interactions between 2,6‐bis(benzimidazolyl)‐pyridine units with metal ions (Zn^II and/or Eu^III) as orthogonal non‐covalent interactions to prepare supramolecular polymers. By changing the ratios of the metal ion additives (Zn(NO₃)₂ and Eu(NO₃)₃) linkers to join the host–guest dimeric complex, the linear supramolecular polymers (100 mol% Zn(NO₃)₂ per ligand) and hyperbranched supramolecular polymers (97 mol% Zn(NO₃)₂ and 3 mol% Eu(NO₃)₃ per ligand) are separately and successfully constructed. This approach not only expands topological control over polymeric systems, but also paves the way for the functionalization of smart and adaptive materials.

     

Supramolecular Alternating Polymer from Crown Ether and Pillar[5]arene‐Based Double Molecular Recognition for Preparation of Hierarchical Materials

A novel supramolecular alternating polymer is constructed based on double molecular recognition events of benzo‐21‐crown‐7 with a secondary ammonium salt and of pillar[5]arene with a neutral guest. The resulting polymer is utilized to prepare hierarchical materials with different dimensionalities for the first time. These materials included zero‐dimensional spherical aggregates, one‐dimensional nanofibers, two‐dimensional microstructured films, and three‐dimensional ordered glue. This development will be helpful for designing and preparing supramolecular hierarchical materials with different dimensionalities.     

基于超分子聚合物的自修复材料

材料的自修复功能对于材料应用具有重要的意义,如键组装/解组装常数、键的方向和链的弛豫时间等因素会影响自修复效率。根据提供修复功能的物质构成形式,可以分为外援型自修复材料和本征型自修复材料,其中本征型自修复材料是当前的热点方向,在本征型自修复材料中,超分子自修复材料以其独特的可逆性组装,以及在快速、可逆、多重响应方面的优势而成为研究重点。本文重点阐述了基于不同结合效应的超分子自修复聚合物的研究进展,并对今后的研究方向作了展望,认为材料的耐环境性能能否达标是未来能否获得应用的关键因素之一。     

Host–Guest Binding‐Site‐Tunable Self‐Assembly of Stimuli‐Responsive Supramolecular Polymers

Despite the remarkable progress made in controllable self‐assembly of stimuli‐responsive supramolecular polymers (SSPs), a basic issue that has not been consideration to date is the essential binding site. The noncovalent binding sites, which connect the building blocks and endow supramolecular polymers with their ability to respond to stimuli, are expected to strongly affect the self‐assembly of SSPs. Herein, the design and synthesis of a dual‐stimuli thermo‐ and photoresponsive Y‐shaped supramolecular polymer (SSP2) with two adjacent β‐cyclodextrin/azobenzene (β‐CD/Azo) binding sites, and another SSP (SSP1) with similar building blocks, but only one β‐CD/Azo binding site as a control, are described. Upon gradually increasing the polymer solution temperature or irradiating with UV light, SSP2 self‐assemblies with a higher binding‐site distribution density; exhibits a flower‐like morphology, smaller size, and more stable dynamic aggregation process; and greater controllability for drug‐release behavior than those observed with SSP1 self‐assemblies. The host–guest binding‐site‐tunable self‐assembly was attributed to the positive cooperativity generated among adjacent binding sites on the surfaces of SSP2 self‐assemblies. This work is beneficial for precisely controlling the structural parameters and controlled release function of SSP self‐assemblies.     

A Robust Nanoporous Supramolecular Metal–Organic Framework Based on Ionic Hydrogen Bonds

Hydrogen‐bond assembly of tripod‐like organic cations [H₃‐MeTrip]³⁺ (1,2,3‐tri(4′‐pyridinium‐oxyl)‐2‐methylpropane) and the hexa‐anionic complex [Zr₂(oxalate)₇]^6? leads to a structurally, thermally, and chemically robust porous 3D supramolecular framework showing channels of 1 nm in width. Permanent porosity has been ascertained by analyzing the material at the single‐crystal level during a sorption cycle. The framework crystal structure was found to remain the same for the native compound, its activated phase, and after guest resorption. The channels exhibit affinities for polar organic molecules ranging from simple alcohols to aniline. Halogenated molecules and I₂ are also taken up from hexane solutions by this unique supramolecular framework.     

Supramolecular Approaches towards Ordered Polymer Materials

Controlled organization of polymer chains into ordered structures is highly important to tune or enhance the properties of the polymeric materials. A supramolecular approach using host–guest chemistry has allowed rational design of chain assemblies with many functional properties. Nanoporous materials with ordered channel structures are particularly useful for attaining precise assemblies of polymer chains through nanoconfinement.     

Supramolecular Polymerization Engineered with Molecular Recognition

Supramolecular polymeric assemblies represent an emerging, promising class of molecular assemblies with enormous versatility compared with their covalent polymeric counterparts. Although a large number of host–guest motifs have been produced over the history of supramolecular chemistry, only a limited number of recognition motifs have been utilized as supramolecular connections in polymeric assemblies. This account describes the molecular recognition of host molecules based on calix[5]arene and bisporphyrin that demonstrate unique guest encapsulations; subsequently, these host–guest motifs are applied to the synthesis of supramolecular polymers that display polymer‐like properties in solution and solid states. In addition, new bisresorcinarenes are developed to form supramolecular polymers that are connected via a rim‐to‐rim hydrogen‐bonded dimeric structure, which is composed of two resorcinarene moieties.

     

Linear Supramolecular Polymers via Connecting Telechelic Polycaprolactone through Alkynylplatinum(II) Terpyridine Molecular Tweezer/Pyrene Recognition Motif

By anchoring alkynylplatinum(II) terpyridine molecular tweezer/pyrene recognition motif on the chain‐ends of telechelic polycaprolactone, high‐molecular‐weight supramolecular polymers have been successfully constructed via noncovalent chain extension, which demonstrate fascinating rheological and thermal properties. Moreover, the resulting assemblies exhibit interesting temperature‐ and solvent‐responsive behaviors, which are promising for the development of adaptive functional materials.

     

Supramolecular Copolymerization by Sequence Reorganization of a Supramolecular Homopolymer

The homopolymeric sequence formed by the head‐to‐head association of tetrakisporphyrin 1 is completely dissociated by the competitive association of the ditopic guest G2 , resulting in the supramolecular copolymer poly‐ 1 ? G2 with an alternatingly repeating host–guest sequence. The 1:1 stoichiometry of 1 and G2 is confirmed by a Job plot using UV/Vis titration and diffusion‐ordered NMR spectroscopy (DOSY). The solution viscometry for poly‐ 1 and poly‐ 1 ? G2 suggests that the supramolecular chain of poly‐ 1 behaves like a rod, whereas the supramolecular copolymer chain of poly‐ 1 ? G2 behaves like a swelled fat chain, which is entangled in the semi‐dilute regime. Atomic force microscopy shows that the supramolecular polymer poly‐ 1 ? G2 is highly oriented through the interdigitation of the long alkyl chains.     

Synthesis of Doubly Ethyl‐Bridged Bis(p‐sulfonatocalix[4]arene) and Its Supramolecular Polymerization with Viologen Dimer

A water‐soluble supramolecular polymer with a high degree of polymerization and viscosity has been constructed based on the strong host–guest interaction between p‐sulfonatocalix[4]arenes (SC4As) and viologen. A homoditopic doubly ethyl‐bridged bis(p‐sulfonatocalix[4]arene) (d‐SC4A) was prepared and its binding behavior towards methyl viologen compared with the singly ethyl‐bridged bis(p‐sulfonatocalix[4]arene) (s‐SC4A) by NMR spectroscopy and isothermal titration calorimetry. By employing a viologen dimer (bisMV⁴⁺) as the homoditopic guest, two linear AA/BB‐type supramolecular polymers, d‐SC4A?bisMV⁴⁺ and s‐SC4A?bisMV⁴⁺, were successfully constructed. Compared with s‐SC4A?bisMV⁴⁺, d‐SC4A?bisMV⁴⁺ shows much higher solubility and viscosity, and has also been characterized by viscosity, diffusion‐ordered NMR spectroscopy, dynamic light scattering, and atomic force microscopy measurements. Furthermore, the polymer is responsive to electrostimulus as viologen is electroactive, which was studied by cyclic voltammetry. This study represents a proof‐of‐principle as the polymer can potentially be applied as a self‐healing and degradable polymeric material.     

Exploiting Cavities in Supramolecular Gels

Endowing supramolecular gelators with cavities opens up a number of opportunities not possible with other gel systems. The well‐established host–guest chemistry of cavitands can be utilized to build up and break down gel structures, introduce responsive functionalities, or enhance selectivity in applications such as catalysis and extraction. Cavity‐containing gelators provide an excellent case study for how different aspects of supramolecular chemistry can be used intelligently to create responsive materials.     

Deep Eutectic Supramolecular Polymers: Bulk Supramolecular Materials

Application of new strategies for supramolecular self‐assembly can significantly impact the properties and/or functions of supramolecular polymers. To realize a facial strategy for the development of solvent‐free supramolecular polymers in bulk, “deep eutectic solvents” were employed. Cyclodextrins and natural acids were used to prepare deep eutectic supramolecular polymers ( DESP s). Deep eutectic solvents have special characteristics that endow DESP s with unique macroscopic properties and excellent processability. DESP s exhibit supramolecular adhesion and temperature‐dependent behavior originating from the combined effects of deep eutectic solvents and supramolecular polymerization. Because DESP s are solvent‐free and display interesting macroscopic properties, they have potential as new adaptive materials.