Tailored Poly(2‐oxazoline) Polymer Brushes to Control Protein Adsorption and Cell Adhesion

POx bottle‐brush brushes (BBBs) are synthesized by SIPGP of 2‐isopropenyl‐2‐oxazoline and consecutive LCROP of 2‐oxazolines on 3‐aminopropyltrimethoxysilane‐modified silicon substrates. The side chain hydrophilicity and polarity are varied. The impact of the chemical composition and architecture of the BBB upon protein (fibronectin) adsorption and endothelial cell adhesion are investigated and prove extremely low protein adsorption and cell adhesion on BBBs with hydrophilic side chains such as poly(2‐methyl‐2‐oxazoline) and poly(2‐ethyl‐2‐oxazoline). The influence of the POx side chain terminal function upon adsorption and adhesion is minor but the side chain length has a significant effect on bioadsorption.

     

“Clickable” Hydrosoluble PEGylated Cryptophane as a Universal Platform for 129Xe Magnetic Resonance Imaging Biosensors

We describe the synthesis of a highly water‐soluble cryptophane 1 that can be seen as a universal platform for the construction of ¹²⁹Xe magnetic resonance imaging (MRI)‐based biosensors. Compound 1 is easily functionalized by Huisgen cycloaddition and exhibits excellent xenon‐encapsulation properties. In addition, 1 is nontoxic at the concentrations typically used for hyperpolarized ¹²⁹Xe MRI.     

One‐Pot Synthesis of Well‐Defined Amphiphilic and Adaptative Block Copolymers via Versatile Combination of “Click” Chemistry and ATRP

Well‐defined amphiphilic PCL‐b‐PDMAEMA block copolymers were successfully synthesized by a combination of ATRP and “click” chemistry following either a commutative two‐step procedure or a straightforward one‐pot process using CuBr · 3Bpy as the sole catalyst. Compared to the traditional coupling method, combining ATRP and click chemistry even in a “one‐pot” process allows the preparation of PCL‐b‐PDMAEMA diblock copolymers characterized by a narrow molecular weight distribution and quantitative conversion of azides and alkynes into triazole functions. Moreover, the amphiphilic character of these copolymers was demonstrated by surface tension measurements and critical micellization concentration was calculated.

     

Concurrent Block Copolymer Polymersome Stabilization and Bilayer Permeabilization by Stimuli‐Regulated “Traceless” Crosslinking

The fabrication of block copolymer (BCP) vesicles (polymersomes) exhibiting synchronized covalent crosslinking and bilayer permeabilization remains a considerable challenge as crosslinking typically leads to compromised membrane permeability. Herein it is demonstrated how to solve this dilemma by employing a stimuli‐triggered crosslinking strategy with amphiphilic BCPs containing photolabile carbamate‐caged primary amines. Upon self‐assembling into polymersomes, light‐triggered self‐immolative decaging reactions release primary amine moieties and extensive amidation reactions then occur due to suppressed amine pK_a within hydrophobic milieu. This leads to serendipitous vesicle crosslinking and the process is associated with bilayer hydrophobicity‐to‐hydrophilicity transition and membrane permeabilization.     

Synthesis of “Clickable” Nano Metal‐organic Framework by Generic Postsynthetic Modification Route

Organic azides have been somewhat popularized due to their pivotal role in the emerging field of “click chemistry”. A simple approach has been used for the synthesis of uniform nano Fe‐MIL‐88B‐NH₂, and a generic postsynthetic modification route has been developed for the synthesis of azide‐modified nano Fe‐MIL‐88B‐N₃. The approach also has been used to synthesize the azide‐modified IRMOF‐3(‐N₃). These new azide‐modified Fe‐MIL‐88B‐N₃ nanocrystals hold promising potential for the applications in the fields of “click chemistry”, nanotechnology devices and nano composite membranes.     

Macromolecular brushes synthesized by “grafting from” approach based on “click chemistry” and RAFT polymerization

Well‐defined macromolecular brushes with poly(N‐isopropyl acrylamide) (PNIPAM) side chains on random copolymer backbones were synthesized by “grafting from” approach based on click chemistry and reversible addition‐fragmentation chain transfer (RAFT) polymerization. To prepare macromolecular brushes, two linear random copolymers of 2‐(trimethylsilyloxy)ethyl methacrylate (HEMA‐TMS) and methyl methacrylate (MMA) (poly(MMA‐co‐HEMA‐TMS)) were synthesized by atom transfer radical polymerization and were subsequently derivated to azide‐containing polymers. Novel alkyne‐terminated RAFT chain transfer agent (CTA) was grafted to polymer backbones by copper‐catalyzed 1,3‐dipolar cycloaddition (azide‐alkyne click chemistry), and macro‐RAFT CTAs were obtained. PNIPAM side chains were prepared by RAFT polymerization. The macromolecular brushes have well‐defined structures, controlled molecular weights, and molecular weight distributions (M_w/M_n ≦ 1.23). The RAFT polymerization of NIPAM exhibited pseudo‐first‐order kinetics and a linear molecular weight dependence on monomer conversion, and no detectable termination was observed in the polymerization. The macromolecular brushes can self‐assemble into micelles in aqueous solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 443–453, 2010     

“Raft” Formation by Two‐Dimensional Self‐Assembly of Block Copolymer Rod Micelles in Aqueous Solution

Block copolymers can form a broad range of self‐assembled aggregates. In solution, planar assemblies usually form closed structures such as vesicles; thus, free‐standing sheet formation can be challenging. While most polymer single crystals are planar, their growth usually occurs by uptake of individual chains. Here we report a novel lamella formation mechanism: core‐crystalline spherical micelles link up to form rods in solution, which then associate to yield planar arrays. For the system of poly(ethylene oxide)‐block‐polycaprolactone in water, co‐assembly with homopolycaprolactone can induce a series of morphological changes that yield either rods or lamellae. The underlying lamella formation mechanism was elucidated by electron microscopy, while light scattering was used to probe the kinetics. The hierarchical growth of lamellae from one‐dimensional rod subunits, which had been formed from spherical assemblies, is novel and controllable in terms of product size and aspect ratio.     

Heterograft copolymers of poly(ε‐caprolactone) prepared by combination of ATRA “grafting onto” and ATRP “grafting from” processes

This paper aims at reporting on the synthesis of a heterograft copolymer by combining the “grafting onto” process based on atom transfer radical addition (ATRA) and the “grafting from” process by atom transfer radical polymerization (ATRP). The statistical copolymerization of ε‐caprolactone (εCL) and α‐chloro‐ε‐caprolactone (αClεCL) was initiated by 2,2‐dibutyl‐2‐stanna‐1,3‐dioxepane (DSDOP), followed by ATRA of parts of the chlorinated units of poly(αClεCL‐co‐εCL) on the terminal double bond of α‐MeO,ω‐CH₂?CH? CH₂? CO₂‐poly(ethylene oxide) (PEO). The amphiphilic poly(εCL‐g‐EO) graft copolymer collected at this stage forms micelles as supported by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The unreacted pendant chloro groups of poly(εCL‐g‐EO) were used to initiate the ATRP of styrene with formation of copolymer with two populations of randomly distributed grafts, that is PEO and polystyrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6015–6024, 2006     

“Clickable” polymers via a combination of RAFT polymerization and isocyanate chemistry

We describe a facile, one‐pot, two‐step polymerization towards synthesizing block co‐polymers bearing reactive isocyanate functional groups. Reversible addition fragmentation chain transfer (RAFT) polymerization is used to mediate the co‐polymerization of isocyanate‐bearing monomers dimethyl meta‐isopropenyl benzyl isocyanate (TMI) and 2‐isocyanatoethyl methacrylate (ICEMA) with styrene and methyl methacrylate (MMA), respectively. ICEMA was incorporated into the polymer at a faster rate than TMI and its unhindered isocyanate group was found to be more reactive than the hindered isocyanate group of TMI. Both the TMI/styrene and the MMA/ICEMA systems maintain the reactivity of the isocyanate functionality, which was exploited by attaching representative hydroxyl‐bearing small and large molecules as well as solid substrates to the block co‐polymers. Thus, we demonstrate the versatility of the block co‐polymer system as a basis for forming branched polymers or as grafts for a solid substrate. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of comb‐like copolymers with amphiphilic poly(ethylene oxide)‐b‐polystyrene graft chains by combination of “graft from” and “graft onto” strategies

A novel method for preparation the comb‐like copolymers with amphihilic poly(ethylene oxide)‐block‐poly(styrene) (PEO‐b‐PS) graft chains by “graft from” and “graft onto” strategies were reported. The ring‐opening copolymerization of ethylene oxide (EO) and ethoxyethyl glycidyl ether (EEGE) was carried out first using α‐methoxyl‐ω‐hydroxyl‐poly(ethylene oxide) (mPEO) and diphenylmethyl potassium (DPMK) as coinitiation system, then the EEGE units on resulting linear copolymer mPEO‐b‐Poly(EO‐co‐EEGE) were hydrolyzed and the recovered hydroxyl groups were reacted with 2‐bromoisobutyryl bromide. The obtained macroinitiator mPEO‐b‐Poly(EO‐co‐BiBGE) can initiate the polymerization of styrene by ATRP via the “Graft from” strategy, and the comb‐like copolymers mPEO‐b‐[Poly(EO‐co‐Gly)‐g‐PS] were obtained. Afterwards, the TEMPO‐PEO was prepared by ring‐opening polymerization (ROP) of EO initiated by 4‐hydroxyl‐2,2,6,6‐tetramethyl piperdinyl‐oxy (HTEMPO) and DPMK, and then coupled with mPEO‐b‐[Poly(EO‐co‐Gly)‐g‐PS] by atom transfer nitroxide radical coupling reaction in the presence of cuprous bromide (CuBr)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) via “Graft onto” method. The comb‐like block copolymers mPEO‐b‐[Poly(EO‐co‐Gly)‐g‐(PS‐b‐PEO)] were obtained with high efficiency (≥90%). The final product and intermediates were characterized in detail. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1930–1938, 2009     

Synthesis of β‐Cyclodextrin Containing Copolymer via “Click” Chemistry and Its Self‐Assembly in the Presence of Guest Compounds

We report the synthesis of a hydrophilic copolymer with one polyethylene glycol (PEG) block and one β‐cyclodextrin (β‐CD) containing block by a “click” reaction between azido‐substituted β‐CD and propargyl flanking copolymer. ¹H NMR study suggested a highly efficient conjugation of β‐CD units by this approach. The obtained copolymer was used as a host macromolecule to construct assemblies in the presence of hydrophobic guests. For assemblies containing a hydrophobic polymer, their size can be simply adjusted by simply changing the content of hydrophobic component. By serving as a guest molecule, hydrophobic drugs can also be loaded accompanying the formation of nanoparticles, and the drug payload is releasable. Therefore, the copolymer synthesized herein can be employed as a carrier for drug delivery.     

“Cell adhesion resistant,UV curable,polymer zinc oxide nanocomposite materials for intraocular lens application”

Foldable acrylic lenses are used for surgical replacement of diseased intraocular lens in treatment of cataract. One of the main postsurgical complications of this treatment method is postcapsular opacification caused by proliferating epithelial cells. The most common approach taken by research community to address this issue has been modification of lens surface with hydrophobic or hydrophilic moieties to manipulate surface cell interaction. In the present study, inherently cell repellent photopolymer resins are presented. Taking advantage of zinc oxide antiproliferative properties, its nanocomposite resins were made and investigated. Hydrophobically modified zinc oxide nanoparticles and poly(phenylethylacrylate‐co‐phenylethyl methacrylate) were made, and their nanocomposite films were prepared by UV polymerization. Films made with 5 wt% ZnO nanoparticles in them resisted fibroblast attachment substantially. In addition, these films filtered harmful UV light and showed other necessary properties like visible light transparency, glass transition temperatures, mechanical strength, and biocompatibility necessary for making intraocular lenses.     

Lactose as a “Trojan Horse” for Quantum Dot Cell Transport

A series of glycan‐coated quantum dots were prepared to probe the effect of glycan presentation in intracellular localization in HeLa and SV40 epithelial cells. We show that glycan density mostly impacts on cell toxicity, whereas glycan type affects the cell uptake and intracellular localization. Moreover, we show that lactose can act as a “Trojan horse” on bi‐functionalized QDs to help intracellular delivery of other non‐internalizable glycan moieties and largely avoid the endosomal/lysosomal degradative pathway.     

Signatures of a Concentration‐Dependent Flory χ Parameter: Swelling and Collapse of Coils and Brushes

The quality of solvents of polymers is often described in terms of the Flory χ parameter typically assumed to depend only on the temperature, T. In certain polymer‐solvent systems fitting the experimental data enforces the replacement of (χT) by a concentration‐dependent χ_eff. In turn, this modifies the swelling and collapse behavior. These effects are studied, in the framework of a mean‐field theory, for isolated coils and for planar brushes. The ϕ dependence of χ_eff gives rise to three main consequences: (i) shift in the cross‐over between Gaussian and self‐avoidance regimes; (ii) a possibility of first‐order collapse transition for isolated flexible coils; (iii) the possibility of a first‐order phase transition leading to a vertical phase separation within the brush. The discussion relates these effects directly to thermodynamic measurements and does not involve a specific microscopic model. The implementation for the case of poly(N‐isopropylamide) (PNIPAM) brushes is discussed.

ϕ vs. z plots, for brushes with N = 300, σ/a² = 18 (σ/R = 0.019) characterized by different χ_eff.     

Tetraphenylethylene‐based Glycoconjugate as a Fluorescence “Turn‐On” Sensor for Cholera Toxin

Tetraphenylethylene (TPE)‐based glycoconjugates were easily synthesized by copper(I)‐catalyzed “click reactions” between propargyl‐attached TPE and azido‐functionalized sugars. The TPE compound bearing lactosyl moieties ( Lac‐TPE ) was found to be a fluorescence “turn‐on” sensor for cholera toxin by virtue of aggregation‐induced emission characteristics of the TPE motif owing to the specific interaction of lactose with the cholera toxin B subunit, whilst a cellobiose‐functionalized TPE derivative did not show any response to the toxin. Therefore, Lac‐TPE shows promising applications in the detection of cholera toxin, as well as in the investigation of carbohydrate–protein interaction.     

Generation of Pseudocontact Shifts in Proteins with Lanthanides Using Small “Clickable” Nitrilotriacetic Acid and Iminodiacetic Acid Tags

Pseudocontact shifts (PCS) induced by paramagnetic lanthanide ions provide unique long‐range structural information in nuclear magnetic resonance (NMR) spectra, but the site‐specific attachment of lanthanide tags to proteins remains a challenge. Here we incorporated p‐azido‐phenylalanine (AzF) site‐specifically into the proteins ubiquitin and GB1, and ligated the AzF residue with alkyne derivatives of small nitrilotriacetic acid and iminodiacetic acid tags using the Cu^I‐catalysed “click” reaction. These tags form lanthanide complexes with no or only a small net charge and produced sizeable PCSs with paramagnetic lanthanide ions in all mutants tested. The PCSs were readily fitted by single magnetic susceptibility anisotropy tensors. Protein precipitation during the click reaction was greatly alleviated by the presence of 150 mM NaCl.     

A Perylene Bisimide Cyclophane as a “Turn‐On” and “Turn‐Off” Fluorescence Probe

A rigid, covalently linked perylene‐3,4:9,10‐tetracarboxylic acid bisimide (PBI) cyclophane was synthesized by imidization of a bay‐substituted perylene bisanhydride with p‐xylylenediamine. The interchromophoric distance of approximately 6.5 Å establishes an ideal rigid cavity for the encapsulation of large aromatic compounds such as perylene and anthracene with binding constants up to 4.6×10⁴ M ^?1 (in CHCl₃). For electron‐poor guest molecules, the complexation process is accompanied by a significantly increased fluorescence, whereas the emission intensity is dramatically quenched by more electron‐rich guests because of the formation of charge‐transfer complexes. Furthermore, the influence of the PBI core twist on the binding constant results in a remarkable selectivity towards more flexible aromatic guest molecules.     

Regenerable‐Catalyst‐Aided,Opened to Air and Sunlight‐Driven “CuAAC&ATRP” Concurrent Reaction for Sequence‐Controlled Copolymer

An ideal stimuli‐responsive controlled/living radical polymerization should have the ability to manipulate the reaction through spatiotemporal “on/off” controls, achieving the polymerization under fully open conditions and allowing for precise control over macromolecular architecture with defined molecular weights and monomer sequence. In this contribution, the photo (sunlight)‐induced electron transfer atom transfer radical‐polymerization (PET‐ATRP) can be realized to be reversibly activated and deactivated under fully open conditions utilizing one‐component copper(II) thioxanthone carboxylate as multifunctional photocatalyst and oxygen scavenger. The polymerization behaviors are investigated, presenting controlled features with first‐order kinetics and linear relationships between molecular weights and monomer conversions. More importantly, “CuAAC&ATRP” concurrent reaction combining PET‐ATRP, photodriven deoxygenation, and photoactivated CuAAC click reaction is successfully employed to synthesize the sequence‐defined multiblock functional copolymers, in which the iterative monomer additions can be easily manipulated under fully open conditions.