Controlled Anisotropic Growth of Co‐Fe‐P from Co‐Fe‐O Nanoparticles

A facile approach to bimetallic phosphides, Co‐Fe‐P, by a high‐temperature (300 °C) reaction between Co‐Fe‐O nanoparticles and trioctylphosphine is presented. The growth of Co‐Fe‐P from the Co‐Fe‐O is anisotropic. As a result, Co‐Fe‐P nanorods (from the polyhedral Co‐Fe‐O nanoparticles) and sea‐urchin‐like Co‐Fe‐P (from the cubic Co‐Fe‐O nanoparticles) are synthesized with both the nanorod and the sea‐urchin‐arm dimensions controlled by Co/Fe ratios. The Co‐Fe‐P structure, especially the sea‐urchin‐like (Co_0.54Fe_0.46)₂P, shows enhanced catalysis for the oxygen evolution reaction in KOH with its catalytic efficiency surpassing the commercial Ir catalyst. Our synthesis is simple and may be readily extended to the preparation of other multimetallic phosphides for important catalysis and energy storage applications.     

Tris(2,2′-bipyridyl)cobalt(III)-doped silica nanoparticle DNA probe for the electrochemical detection of DNA hybridization

A new and sensitive electrochemical DNA hybridization detection assay, using tris(2,2′-bipyridyl)cobalt(III) [Co(bpy)₃³⁺]-doped silica nanoparticles as the oligonucleotide (ODN) labeling tag, and based on voltammetric detection of Co(bpy)₃³⁺ inside silica nanoparticles, is described. Electro-active Co(bpy)₃³⁺ is not possible for directly linking with DNA, it is doped into the silica nanoparticles in the process of nanoparticles synthesis for DNA labeling with trimethoxysilylpropydiethylenetriamine (DETA) and glutaraldehyde as linking agents. The Co(bpy)₃³⁺ labeled DNA probe is used to hybridize with target DNA immobilized on the surface of glassy carbon electrode. Only the complementary sequence DNA (cDNA) could form a double-stranded DNA (dsDNA) with the DNA probe labeled with Co(bpy)₃³⁺ and give an obvious electrochemical response. A three-base mismatch sequence and non-complementary sequence had negligible response. Due to the large number of Co(bpy)₃³⁺ molecules inside silica nanoparticles linked to oligonucleotide DNA probe, the assay showed a high sensitivity. It allows the detection at levels as low as 2.0×10⁻¹⁰ mol l⁻¹ of the target oligonucleotides.     

Synthesis and characterization of Co (III) salen complex immobilized on cobalt ferrite‐silica nanoparticle and their application in the synthesis of spirooxindoles

The preparation, characterization and catalytic application of Co (III) salen complex loaded on cobalt ferrite‐silica nanoparticle [CoFe₂O₄@SiO₂@ Co (III) salen complex] are described. Co (III) salen complex loaded on ferrite cobalt‐silica nanoparticles is characterized by transmission electron microscopy, scanning electron microscopy coupled with energy‐dispersive X‐ray, vibrating‐sample magnetometer and Fourier transform‐infrared analyses. The thermal stability of the material is also determined by thermal gravimetric analysis. An average crystallite size is determined from the full‐width at half‐maximum of the strongest reflection by using Scherrer's approximation by powder X‐ray diffractometry. The efficiency of CoFe₂O₄@SiO₂@Co (III) salen complex is investigated in the synthesis of spirooxindoles of malononitrile, various isatins with 1,3‐dicarbonyles. The nanocatalyst demonstrated excellent catalytic activity that gave the corresponding coupling products in good to excellent yields. Moreover, the recoverability and reusability of CoFe₂O₄@SiO₂@Co (III) salen complex is investigated where nanocatalyst could be recovered and reused at least five times without any appreciable decrease in activity and selectivity, which confirmed its high efficiency and high stability under the reaction conditions and during recycling stages.     

Tuning the Metal–Support Interaction by Structural Recognition of Cobalt‐Based Catalyst Precursors

Controlling the nature and size of cobalt(II) polynuclear precursors on γ‐alumina and silica‐alumina supports represents a challenge for the synthesis of optimal cobalt‐based heterogeneous catalysts. By density functional theory (DFT) calculations, we show how after drying the interaction of cobalt(II) precursor on γ‐alumina is driven by a structural recognition phenomenon, leading to the formation of an epitaxial Co(OH)₂ precipitate involving a Co–Al hydrotalcite‐like interface. On a silica‐alumina surface, this phenomenon is prevented due to the passivation effect of silica domains. This finding opens new routes to tune the metal–support interaction at the synthesis step of heterogeneous catalysts.     

Synthesis of pH‐responsive magnetic yolk–shell nanoparticles: A comparison between conventional etching and new deswelling approaches

Iron oxide (Fe₃O₄) magnetic nanoparticles as movable cores were used to synthesize yolk–shell nanoparticles with pH‐responsive shell composed of ethylene glycol dimethacrylate (EGDMA)‐crosslinked poly(acrylic acid) (PAA) via two different routes. In the first more common route, Fe₃O₄ nanoparticles were coated with silica layer via the Stöber process to yield Fe₃O₄@SiO₂ core–shell nanoparticles, subsequently used as seeds in the distillation precipitation copolymerization of AA and EGDMA to yield Fe₃O₄@SiO₂@P(AA‐EGDMA). The silica layer was selectively removed through alkali etching to yield Fe₃O₄@air@P(AA‐EGDMA). In the second route, Fe₃O₄ nanoparticles without any stabilization were used as seeds in the distillation precipitation copolymerization of AA and EGDMA to yield Fe₃O₄@P(AA‐EGDMA) core–shell nanoparticles. The nanoparticles were subsequently dispersed in acidic medium of pH = 2. Yolk–shell Fe₃O₄@air@P(AA‐EGDMA) nanoparticles were formed through deswelling of crosslinked PAA because of protonation of carboxyl groups at low pH values. Various techniques were utilized to investigate the characteristics of the synthesized core–shell nanoparticles. Formation of yolk–shell nanostructure was observed for both synthesis routes, namely etching of silica layer and deswelling approaches, from vibrating sample magnetometry and transmission electron microscopy results. Both types of nanoparticles showed pH‐responsive behaviour, i.e. decrease in absorption with increase in pH, as examined using UV–visible spectroscopy.     

A General Catalyst Based on Cobalt Core–Shell Nanoparticles for the Hydrogenation of N-Heteroarenes Including Pyridines

Herein, we report the synthesis of specific silica-supported Co/Co₃O₄ core–shell based nanoparticles prepared by template synthesis of cobalt-pyromellitic acid on silica and subsequent pyrolysis. The optimal catalyst material allows for general and selective hydrogenation of pyridines, quinolines, and other heteroarenes including acridine, phenanthroline, naphthyridine, quinoxaline, imidazo[1,2-a]pyridine, and indole under comparably mild reaction conditions. In addition, recycling of these Co nanoparticles and their ability for dehydrogenation catalysis are showcased.     

Selective Transformation of Syngas into Gasoline‐Range Hydrocarbons over Mesoporous H‐ZSM‐5‐Supported Cobalt Nanoparticles

Bifunctional Fischer–Tropsch (FT) catalysts that couple uniform‐sized Co nanoparticles for CO hydrogenation and mesoporous zeolites for hydrocracking/isomerization reactions were found to be promising for the direct production of gasoline‐range (C_5–11) hydrocarbons from syngas. The Brønsted acidity results in hydrocracking/isomerization of the heavier hydrocarbons formed on Co nanoparticles, while the mesoporosity contributes to suppressing the formation of lighter (C_1–4) hydrocarbons. The selectivity for C_5–11 hydrocarbons could reach about 70 % with a ratio of isoparaffins to n‐paraffins of approximately 2.3 over this catalyst, and the former is markedly higher than the maximum value (ca. 45 %) expected from the Anderson–Schulz–Flory distribution. By using n‐hexadecane as a model compound, it was clarified that both the acidity and mesoporosity play key roles in controlling the hydrocracking reactions and thus contribute to the improved product selectivity in FT synthesis.     

The first urea‐based ionic liquid‐stabilized magnetic nanoparticles: an efficient catalyst for the synthesis of bis(indolyl)methanes and pyrano[2,3‐d]pyrimidinone derivatives

Urea‐based ionic liquid stabilized on silica‐coated Fe₃O₄ magnetic nanoparticles, {Fe₃O₄@SiO₂@(CH₂)₃‐Urea‐SO₃H/HCl}, as an unexceptionable and smooth releasing urea fertilizer in alkali soils was synthesized and fully characterized using Fourier transform infrared, UV–visible and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, scanning and transmission electron microscopies, atomic force microscopy and thermogravimetric analysis. The nanostructure catalyst as a novel, green and efficient catalyst was applied for the synthesis of bis(indolyl)methane derivatives via the condensation reaction between 2‐methylindole and aldehydes at room temperature under solvent‐free conditions. Also, pyrano[2,3‐d]pyrimidinone derivatives were prepared in the presence of the nanomagnetic urea‐based catalyst by the one‐pot three‐component condensation reaction of 1,3‐dimethylbarbituric acid, aldehydes and malononitrile under solvent‐free conditions at 60 °C. To the best of our knowledge, this is the first report of the synthesis of urea‐based ionic liquid stabilized on silica‐coated Fe₃O₄ magnetic nanoparticles. So the present work can open up a new and promising insight in the course of rational design, synthesis and applications of task‐specific fertilizer‐based nanomagnetic ionic liquids with desirable properties as unexceptionable substances for sustainable processes. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of Imidazo[1,2‐a]pyridines Using Fe3O4@SiO2 as an Efficient Nanomagnetic Catalyst via a One‐Pot Multicomponent Reaction

A one‐pot multicomponent synthesis of imidazo[1,2‐a]pyridine derivatives by using pyridin‐2‐amines, aldehydes, and terminal alkynes in the presence of a catalytic amount of silica‐supported iron oxide (Fe₃O₄@SiO₂) nanoparticles in refluxing EtOH in good‐to‐excellent yields is reported.     

Silica/Poly(1,5‐dioxepan‐2‐one) Hybrid Nanoparticles by “Direct” Surface‐Initiated Polymerization

Summary: Biodegradable poly(1,5‐dioxepan‐2‐one) (PDXO) was grown directly from Si OH groups of a silica nanoparticle by surface‐initiated, ring‐opening polymerization (SI‐ROP) of 1,5‐dioxepan‐2‐one (DXO). The direct SI‐ROP of DXO was achieved by heating a mixture of Sn(Oct)₂, DXO, and the silica nanoparticles (316 nm in diameter) in anhydrous toluene. The resulting silica/PDXO hybrid nanoparticles were characterized by means of ¹H NMR spectroscopy, IR spectroscopy, thermogravimetric analysis, and field‐emission scanning electron microscopy.

The procedure for the surface‐initiated, ring‐opening polymerization of 1,5‐dioxepan‐2‐one on silica nanoparticles reported here.     

Imprinted silica nanoparticles coated with N‐propylsilylmorpholine‐4‐carboxamide for the determination of m‐cresol in synthetic and real samples

m‐Cresol‐imprinted silica nanoparticles coated with N‐propylsilylmorpholine‐4‐carboxamide have been developed that contain specific pockets for the selective uptake of m‐cresol. Silica nanoparticles were synthesized by a sol–gel process followed by functionalization of their surface with N‐propylsilylmorpholine‐4‐carboxamide. The formation of m‐cresol‐imprinted silica nanoparticles was confirmed by UV‐Vis spectrophotometry, infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. Electron microscopic studies revealed the formation of monodispersed imprinted silica nanoparticles with spherical shape and an average size of 83 nm. The developed nanoparticles were filled in a syringe and used for the extraction of m‐cresol from aqueous samples followed by quantification using high‐performance liquid chromatography with diode array detection. Various adsorption experiments showed that developed m‐cresol‐imprinted silica nanoparticles exhibited a high adsorption capacity and selectivity and offered a fast kinetics for rebinding m‐cresol. The chromatographic quantification was achieved using mobile phase consisting of acetonitrile/water (70:30 v/v) at an isocratic flow rate of 1.0 mL/min using a reversed‐phase C₁₈ column and detection at λ_max = 275 nm. The limits of detection and quantification were 1.86 and 22.32 ng/mL, respectively, for the developed method. The percent recoveries ranged from 96.66–103.33% in the spiked samples. This combination of this nanotechnique with molecular imprinting was proved as a reliable, sensitive and selective method for determining the target from synthetic and real samples.     

Synthesis,characterization and application of sulfonic acid supported on ferrite–silica superparamagnetic nanoparticles

In this study, the synthesis of sulfonic acid supported on ferrite–silica superparamagnetic nanoparticles (Fe₃O₄@SiO₂@SO₃H) as a nanocatalyst with large density of acidic groups is suggested. This nanocatalyst was prepared in three steps: preparation of colloidal iron oxide magnetic nanoparticles (Fe₃O₄ MNPs), coating of silica on Fe₃O₄ MNPs (Fe₃O₄@SiO₂) and incorporation of sulfonic acid as a functional group on the surface of Fe₃O₄@SiO₂ nanoparticles (Fe₃O₄@SiO₂@SO₃H). The properties of the prepared magnetic nanoparticles were characterized using transmission electron microscopy, infrared spectroscopy, vibrating sample magnetometry, X‐ray diffraction and thermogravimetric analysis. Finally, the applicability of the synthesized magnetic nanoparticles was tested as a heterogeneous solid acid nanocatalyst for one‐pot synthesis of diindolyloxindole derivatives in aqueous medium. Oxindole derivatives were produced by the coupling of indole and isatin compounds with good to high yields (60–98%). Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation of a variety of fluoroalkyl end‐capped N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomer/silica nanocomposites possessing no weight loss characteristic at 800°C

A variety of fluoroalkyl end‐capped N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomer [R_F‐(DOBAA)_n‐ R_F]/silica nanocomposites, in which the oligomer contents are 18–96%, were prepared by reactions of the corresponding fluorinated oligomer with tetraethoxysilane and silica nanoparticles under alkaline conditions. Each fluorinated oligomer/silica composite thus obtained is nanometer size‐controlled very fine particles (22–68 nm) possessing a good dispersibility and stability in a variety of solvents including water. Interestingly, the weight loss of R_F‐(DOBAA)_n‐R_F/silica nanocomposites, in which the oligomer contents are 18–72%, were not observed at all even at 800°C, as well as the original silica nanoparticles, although the corresponding sub‐micrometer size‐controlled R_F‐ (DOBAA)_n‐R_F/silica composites (particle size: 359 nm) decomposed completely at 800°C to afford the weight loss in proportion to the content of R_F‐(DOBAA)_n‐R_F oligomer in composites. On the other hand, a slight weight loss of R_F‐(DOBAA)_n‐R_F/silica nanocomposites, in which the oligomer contents are 75–94%, was observed at 800°C compared to that of the original silica nanoparticles. Copyright © 2008 John Wiley & Sons, Ltd.     

Copper‐supported β‐cyclodextrin‐functionalized magnetic nanoparticles: Efficient multifunctional catalyst for one‐pot ‘green’ synthesis of 1,2,3‐triazolylquinazolinone derivatives

The green synthesis of 2‐(4‐((1‐phenyl‐1H‐1,2,3‐triazol‐4‐yl)oxy)phenyl)quinazolin‐4(3H)‐one derivatives is reported. The catalyst for this synthesis is copper‐supported β‐cyclodextrin‐functionalized magnetic silica–iron oxide nanoparticles ([Cu@BCD@SiO₂@SPION]). [Cu@BCD@SiO₂@SPION] simultaneously catalyses ‘click’ reaction, oxidation of C? N bond and multicomponent reaction. The desired 1,2,3‐triazolylquinazolinone product is easily obtained in water at room temperature under mild reaction conditions. Another advantage of the catalyst is its reusability. It can simply be isolated using an external magnet and reused in reactions with no significant decrease in catalyst efficiency. Transmission electron microscopy, scanning electron microscopy, vibrating sample magnetometry and Fourier transform infrared spectroscopy are used for exact characterization of the [Cu@BCD@SiO₂@SPION] catalyst.     

Synthesis and characterization of silica‐graft‐polystyrene hybrid nanoparticles: Effect of constraint on the glass‐transition temperature of spherical polymer brushes

The effect of the chain constraint on the glass‐transition temperature of polystyrene (pS) was studied in the context of polymer tethering to curved surfaces. The synthesis and characterization of silica‐graft‐polystyrene (SiO₂‐g‐pS) hybrid nanoparticles is reported. Silica nanoparticles possessing covalently bound pS chains were prepared by the atom transfer radical polymerization of styrene from functionalized colloidal surfaces. These hybrid nanoparticles serve as interesting examples of spherical polymer brushes, as a high density of grafted pS was achieved on the inorganic colloid. The confirmation of a brushlike extension of immobilized chains in a good solvent was obtained with dynamic light scattering in toluene of SiO₂‐g‐pS colloids possessing various molar masses of tethered pS. The solid‐state morphology of SiO₂‐g‐pS ultrathin films was assessed with transmission electron microscopy, and this confirmed that the silica colloids were well‐dispersed in a matrix of the tethered polymer. Differential scanning calorimetry was used to study the effects of tethering and chain immobilization on the glass‐transition temperature of pS. The measured glass‐transition temperature of annealed bulk films of the hybrid nanoparticles was elevated with respect to the value for pure bulk pS. The enhancements ranged from 13 to 2 K for SiO₂‐g‐pS brushes possessing tethered pS with number‐average molecular weights of 5230 and 32,670 g/mol, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2667–2676, 2002     

Chloroaluminate ionic liquid‐modified silica‐coated magnetic nanoparticles: Efficient and reusable catalyst for selective synthesis of mono‐ and bis‐dihydropyrano[3,2‐b]chromenediones

The synthesis, characterization and catalytic activity of chloroaluminate ionic liquid‐modified silica‐coated magnetic nanoparticles ([SiPrPy]AlCl₄@MNPs) are described. The prepared magnetic nanocatalyst was characterized using Fourier transform infrared spectroscopy, elemental analysis, vibrating sample magnetometry, scanning and transmission electron microscopies, X‐ray diffraction and inductively coupled plasma analysis. The results showed that the ionic liquid had been successfully immobilized onto the magnetic support, and the resulting nanoparticles exhibited high catalytic activity for the synthesis of a diverse range of dihydropyrano[3,2‐b ]chromenediones via a one‐pot, three‐component and solvent‐free reaction of aromatic aldehydes, 1,3‐diones and kojic acid. This catalytic system also showed excellent activity in the selective synthesis of mono‐ and bis‐dihydropyrano[3,2‐b ]chromenediones from dialdehydes. The procedure gave the products in excellent yields and in very short reaction times. Moreover, the catalyst could be reused eight times without loss of its catalytic activity.     

Ionic liquid‐functionalized mesoporous silica nanoparticles ([pmim]FeCl4/MSNs): Efficient nanocatalyst for solvent‐free synthesis of N,N′‐diaryl‐substituted formamidines

We report the synthesis of ionic liquid‐functionalized mesoporous silica nanoparticles ([pmim]FeCl₄/MSNs) via a method of post‐grafting on parent MSNs. This hybrid material was characterized using scanning and transmission electron microscopies, energy‐dispersive X‐ray spectroscopy, nitrogen adsorption–desorption analysis, Fourier transform infrared spectroscopy, powder X‐ray diffraction and thermal analyses. The material was utilized as an efficient heterogeneous catalyst for the synthesis of N ,N ′‐diaryl‐substituted formamidines through the reaction of triethyl orthoformate with arylamines under solvent‐free conditions. The catalyst was recovered easily and reused several times without significant loss of its catalytic activity.     

Different Synthesis Protocols for Co3O4–CeO2 Catalysts—Part 1: Influence on the Morphology on the Nanoscale

Co₃O₄‐modified CeO₂ (Co/Ce 1:4) was prepared by a combination of sol–gel processing and solvothermal treatment. The distribution of Co was controlled by means of the synthesis protocol to yield three different morphologies, namely, Co₃O₄ nanoparticles located on the surface of CeO₂ particles, coexistent Co₃O₄ and CeO₂ nanoparticles, or Co oxide structures homogeneously distributed within CeO₂. The effect of the different morphologies on the properties of Co₃O₄–CeO₂ was investigated with regard to the crystallite phase(s), particle size, surface area, and catalytic activity for CO oxidation. The material with Co₃O₄ nanoparticles finely dispersed on the surface of CeO₂ particles had the highest catalytic activity.     

Electrochemical Preparation of N‐Doped Cobalt Oxide Nanoparticles with High Electrocatalytic Activity for the Oxygen‐Reduction Reaction

Nitrogen‐doped CoO (N‐CoO) nanoparticles with high electrocatalytic activity for the oxygen‐reduction reaction (ORR) were fabricated by electrochemical reduction of CoCl₂ in acetonitrile solution at cathodic potentials. The initially generated, highly reactive nitrogen‐doped Co nanoparticles were readily oxidized to N‐CoO nanoparticles in air. In contrast to their N‐free counterparts (CoO or Co₃O₄), N‐CoO nanoparticles with a N content of about 4.6 % exhibit remarkable ORR electrocatalytic activity, stability, and immunity to methanol crossover in an alkaline medium. The Co?N_x active sites in the CoO nanoparticles are held responsible for the high ORR activity. This work opens a new path for the preparation of nitrogen‐doped transition metal oxide nanomaterials, which are promising electrocatalysts for fuel cells.     

Active Salt/Silica‐Templated 2D Mesoporous FeCo‐Nx‐Carbon as Bifunctional Oxygen Electrodes for Zinc–Air Batteries

Two types of templates, an active metal salt and silica nanoparticles, are used concurrently to achieve the facile synthesis of hierarchical meso/microporous FeCo‐N_x‐carbon nanosheets (meso/micro‐FeCo‐N_x‐CN) with highly dispersed metal sites. The resulting meso/micro‐FeCo‐N_x‐CN shows high and reversible oxygen electrocatalytic performances for both ORR and OER, thus having potential for applications in rechargeable Zn–air battery. Our approach creates a new pathway to fabricate 2D meso/microporous structured carbon architectures for bifunctional oxygen electrodes in rechargeable Zn–air battery as well as opens avenues to the scale‐up production of rationally designed heteroatom‐doped catalytic materials for a broad range of applications.