On the Mechanism of Copper(I)‐Catalyzed Azide–Alkyne Cycloaddition

The copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction regiospecifically produces 1,4‐disubstituted‐1,2,3‐triazole molecules. This heterocycle formation chemistry has high tolerance to reaction conditions and substrate structures. Therefore, it has been practiced not only within, but also far beyond the area of heterocyclic chemistry. Herein, the mechanistic understanding of CuAAC is summarized, with a particular emphasis on the significance of copper/azide interactions. Our analysis concludes that the formation of the azide/copper(I) acetylide complex in the early stage of the reaction dictates the reaction rate. The subsequent triazole ring‐formation step is fast and consequently possibly kinetically invisible. Therefore, structures of substrates and copper catalysts, as well as other reaction variables that are conducive to the formation of the copper/alkyne/azide ternary complex predisposed for cycloaddition would result in highly efficient CuAAC reactions. Specifically, terminal alkynes with relatively low pK_a values and an inclination to engage in π‐backbonding with copper(I), azides with ancillary copper‐binding ligands (aka chelating azides), and copper catalysts that resist aggregation, balance redox activity with Lewis acidity, and allow for dinuclear cooperative catalysis are favored in CuAAC reactions. Brief discussions on the mechanistic aspects of internal alkyne‐involved CuAAC reactions are also included, based on the relatively limited data that are available at this point.     

Ligand‐free,copper‐catalyzed,one‐pot,three‐component synthesis of novel 1,2,3‐triazole‐linked indoles in magnetized water

Magnetized water (MW) is used as a green and new solvent‐promoting medium for the one‐pot, three‐component synthesis of novel 1,2,3‐triazole‐linked indoles catalyzed by copper iodide. A broad range of 2‐aryl‐1‐(prop‐2‐ynyl)‐1H‐indole‐3‐carbaldehydes were reacted with alkyl halides and sodium azide via copper‐catalyzed azide–alkyne cycloaddition reactions in MW in the absence of any ligand. This method offers the advantages of short reaction times, green procedure, low cost, simple work‐up, quantitative reaction yields, and no need for any organic solvent.     

Accelerated Solvent‐ and Catalyst‐Free Synthesis of 1,2,3‐Triazolium‐Based Poly(Ionic Liquid)s

A straightforward and expeditious monotopic approach for the preparation of 1,2,3‐triazolium‐based poly(ionic liquids) (TPILs) is reported. It is based on the solvent‐ and catalyst‐free polyaddition of an α‐azide‐ω‐alkyne monomer in the presence of methyl iodide or N‐methyl bis[(trifluoromethyl)sulfonyl]imide alkylating agents. Poly(1,2,3‐triazole)s generated in bulk or by thermal azide–alkyne cycloaddition (AAC) are quaternized in‐situ to afford TPILs composed of 1,3,4‐ and 1,3,5‐trisubstituted 1,2,3‐triazolium units. The physical and ion‐conducting properties of the prepared samples are compared with the TPILs composed solely of 1,3,4‐trisubstituted 1,2,3‐triazolium units obtained through a multistep approach involving copper(I)‐catalyzed AAC polyaddition, quaternization of the 1,2,3‐triazole groups, and anion metathesis. TPILs obtained through the monotopic approach display thermal stabilities and ionic conductivities comparable to their pure regioisomeric analogues.

     

Copper(I)‐Catalyzed Interrupted Click/Sulfenylation Cascade: One‐Pot Synthesis of Sulfur Cycle Fused 1,2,3‐Triazoles

Herein, we report a practical protocol for the synthesis of sulfur cycle fused 1,2,3‐triazoles through a copper(I)‐catalyzed tandem click/intramolecular sulfenylation reaction. The reaction proceeded via a copper‐catalyzed alkyne azide cycloaddition, followed by interception of the in situ formed cuprate‐triazole intermediate with p‐toluenesulfonothioate. This reaction shows broad substrate scope, complete regioselectivity, and excellent functional group tolerance under mild reaction conditions.     

An Efficient Synthesis of Mono and Bis‐1,2,3‐triazole AZT Derivatives via Copper(I)‐catalyzed Cycloaddition

An efficient synthesis of novel mono and bis‐1,2,3‐triazoles 3′‐azido‐2′‐deoxythymidine (AZT) derivatives via copper(I)‐catalyzed 1,3‐dipolar cycloaddition reaction is described. Starting from AZT and terminal alkyne derivatives, mono and bis‐1,2,3‐triazole AZT derivatives are regioselectively obtained in good yields under mild conditions using CuSO4·5H2O and sodium ascorbate as a catalyst system, and t‐BuOH/H₂O (1:1, v/v) as a co‐solvent. The structures of these compounds were elucidated by IR, HR MS and NMR.     

Recognition Properties and Self‐assembly of Planar [M(2‐pyridyl‐1,2,3‐triazole)2]2+ Metallo‐ligands

Molecular recognition continues to be an area of keen interest for supramolecular chemists. The investigated [M( L )₂]²⁺ metallo‐ligands (M=Pd^II, Pt^II, L =2‐(1‐(pyridine‐4‐methyl)‐1 H‐1,2,3‐triazol‐4‐yl)pyridine) form a planar cationic panel with vacant pyridyl binding sites. They interact with planar neutral aromatic guests through π–π and/or metallophilic interactions. In some cases, the metallo‐ligands also interacted in the solid state with Ag^I either through coordination to the pendant pyridyl arms, or through metal–metal interactions, forming coordination polymers. We have therefore developed a system that reliably recognises a planar electron‐rich guest in solution and in the solid state, and shows the potential to link the resultant host–guest adducts into extended solid‐state structures. The facile synthesis and ready functionalisation of 2‐pyridyl‐1,2,3‐triazole ligands through copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) “click” chemistry should allow for ready tuning of the electronic properties of adducts formed from these systems.     

Organocatalytic Asymmetric Friedel–Crafts Reaction of Sesamol with Isatins: Access to Biologically Relevant 3‐Aryl‐3‐hydroxy‐2‐oxindoles

The Friedel–Crafts reaction of electron‐rich phenols with isatins was developed by employing bifunctional thiourea–tertiary amine organocatalysts. Cinchona alkaloid derived thiourea epiCDT‐ 3 a efficiently catalyzed the Friedel–Crafts‐type addition of phenols to isatin derivatives to provide 3‐aryl‐3‐hydroxy‐2‐oxindoles 7 and 9 in good yield (80–95 %) with good enantiomeric excess (83–94 %). Friedel–Crafts adduct 7 t was subjected to a copper(I)‐catalyzed azide–alkyne cycloaddition to obtain biologically important 3‐aryl‐3‐hydroxy‐2‐oxindole 11 in good enantiomeric excess and having a 1,2,3‐triazole moiety.     

Synthesis of Click-Chelator via Cu(I)-Catalyzed Alkyne-Azide Cycloaddition

The click‐ligands based on 1,2,3‐triazole and pyridine unit has been synthesized via Cu(I)‐catalyzed alkyne‐azide cycloaddition from corresponding organic azides and terminal alkynes. The ligand structure was characterized by NMR, IR and elemental analysis as well as single crystal diffractions. The single crystal structure of the complexes from two different ligands coordinating to Cu(II) and Co(II) ions indicated that the N(2) atom in 1,2,3‐triazole unit can act as an efficient donor to metals through the rational molecular design.     

One‐Pot Aminoethylation of Indoles/Pyrroles with Alkynes and Sulfonyl Azides

A general and efficient one‐pot aminoethylation of substituted indoles/pyrroles was accomplished for the synthesis of various tryptamine derivatives employing a combination of alkynes and sulfonyl azides as readily accessible aminoethylating agents. The reaction features a successful integration of copper‐catalyzed alkyne and azide cycloaddition to N‐sulfonyl‐1,2,3‐triazole, rhodium‐catalyzed selective insertion of α‐iminocarbenes onto the C3?H bond of indoles, and reduction of the resultant enamides to tryptamine derivatives employing either NaCNBH₃ or palladium catalyst, in one‐pot. The reaction also showed excellent functional‐group tolerance and allowed the synthesis of various substituted tryptamines in good to excellent yield. This transformation constitutes a one‐pot formal regioselective functionalization of terminal alkynes. Utility of the synthesized tryptamine was further demonstrated in the synthesis of dihydro‐β‐carboline and tryptoline.     

Determining the Origin of Rate‐Independent Chemoselectivity in CuAAC Reactions: An Alkyne‐Specific Shift in Rate‐Determining Step

We report a kinetic and spectroscopic analysis of alkyne‐dependent chemoselectivity in the copper‐catalyzed azide–alkyne click (CuAAC) reaction. Studies of six alkyne subtypes reveal that the rate‐determining step (RDS) of an aromatic ynamine class is shifted from acetylide formation to the azide ligation/migratory insertion event allowing chemoselectivity independent of overall rate.     

Living cationic polymerization of a vinyl ether with an unprotected pendant alkynyl group and their use for the protecting group‐free synthesis of macromonomer‐type glycopolymers via CuAAC with maltosyl azides

An asymmetric bifunctional monomer having both an unprotected alkynyl group and a vinyl ether (VE) group (3‐[2‐(2‐vinyloxyethoxy)‐ethoxy]‐propyne [VEEP]) was newly designed and found that the polymerization of VEEP smoothly proceeded in a controlled manner under a living cationic polymerization condition to give alkyne‐substituted polyVE (polyVEEP) without any protection of the pendant alkynyl function. Next, the use of an initiator with a methacryloyl moiety for the living cationic polymerization of VEEP afforded macromonomer‐type polyVE (MA‐PVEEP) carrying pendant alkynyl groups. The potential ability of the resultant macromonomer as an alkyne‐substituted polymer for the copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC) was also confirmed. A novel macromonomer‐type glycopolymer [MA‐P(VE‐Mal)] having pendant maltose residues and a terminal methacryloyl group was successfully synthesized by CuAAC of MA‐PVEEP with maltosyl azide. Thus, a new pathway to the controlled synthesis of macromonomer‐type glycopolymers of free from any protecting/deprotecting processes was demonstrated. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 681–688     

Synthesis and crosslinking behavior of a novel linear polymer bearing 1,2,3‐triazol and benzoxazine groups in the main chain by a step‐growth click‐coupling reaction

The click‐coupling reaction was applied to polycondensation, to synthesize a high‐molecular weight prepolymer having benzoxazine moieties in the main chain. For the polycondensation, a bifunctional N‐propargyl benzoxazine was synthesized from bisphenol A, propargylamine, and formaldehyde. The propargyl group was efficiently used for the copper(I)‐catalyzed alkyne‐azide “click” reaction with p‐xylene‐α,α′‐diazide, to give the corresponding linear polycondensate having 1,2,3‐triazole junctions. The polycondensation proceeded in N,N‐dimethylformamide (DMF) at room temperature. By this highly efficient “click‐” polycondensation reaction, the benzoxazine ring in the monomer was successfully introduced into the polymer main chain without any side reaction. The obtained polymer (=prepolymer) underwent thermal crosslinking to afford the corresponding product, which was insoluble in a wide range of organic solvents and exhibited higher thermal stability than the polymer before crosslinking. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2316–2325, 2008     

Organometallic Rotaxanes with a Triazole Group in the Axle Component and Their Behavior as Ligands of PtII Complexes

Two ferrocenylmethyl ammonium salts were used as axle components of pseudorotaxanes with dibenzo[24]crown‐8. The pseudorotaxane with an alkyne terminal group in the axle component underwent a Cu‐catalyzed Huisgen coupling reaction (click reaction) with an alkyl azide to afford cationic [2]rotaxanes with a triazole group in the axle molecule. The rotaxane reacted with Ac₂O to produce neutral rotaxanes with an amide group in the axle component. Both cationic and neutral rotaxanes were treated with K[PtCl₃(CH₂?CH₂)] to form the Pt^II‐containing rotaxanes.     

Self‐Assembly of 3,6‐Bis(4‐triazolyl)pyridazine Ligands with Copper(I) and Silver(I) Ions: Time‐Dependant 2D‐NOESY and Ultracentrifuge Measurements

Two 3,6‐bis(R‐1H‐1,2,3‐triazol‐4‐yl)pyridazines (R=mesityl, monodisperse (CH₂ CH₂O)₁₂CH₃) were synthesized by the copper(I)‐catalyzed azide–alkyne cycloaddition and self‐assembled with tetrakis(acetonitrile)copper(I) hexafluorophosphate and silver(I) hexafluoroantimonate in dichloromethane. The obtained copper(I) complexes were characterized in detail by time‐dependent 1D [¹H, ¹³C] and 2D [¹H‐NOESY] NMR spectroscopy, elemental analysis, high‐resolution ESI‐TOF mass spectrometry, and analytical ultracentrifugation. The latter characterization methods, as well as the comparison to analog 3,6‐di(2‐pyridyl)pyridazine (dppn) systems and their corresponding copper(I) and silver(I) complexes indicated that the herein described 3,6‐bis(1H‐1,2,3‐triazol‐4‐yl)pyridazine ligands form [2×2] supramolecular grids. However, in the case of the 3,6‐bis(1‐mesityl‐1H‐1,2,3‐triazol‐4‐yl)pyridazine ligand, the resultant red‐colored copper(I) complex turned out to be metastable in an acetone solution. This behavior in solution was studied by NMR spectroscopy, and it led to the conclusion that the copper(I) complex transforms irreversibly into at least one different metal complex species.     

Efficient Atropodiastereoselective Access to 5,5′‐Bis‐1,2,3‐triazoles: Studies on 1‐Glucosylated 5‐Halogeno 1,2,3‐Triazoles and Their 5‐Substituted Derivatives as Glycogen Phosphorylase Inhibitors

Whereas copper‐catalyzed azide–alkyne cycloaddition (CuAAC) between acetylated β‐D ‐glucosyl azide and alkyl or phenyl acetylenes led to the corresponding 4‐substituted 1‐glucosyl‐1,2,3‐triazoles in good yields, use of similar conditions but with 2 equiv CuI or CuBr led to the 5‐halogeno analogues (>71 %). In contrast, with 2 equiv CuCl and either propargyl acetate or phenyl acetylene, the major products (>56 %) displayed two 5,5′‐linked triazole rings resulting from homocoupling of the 1‐glucosyl‐4‐substituted 1,2,3‐triazoles. The 4‐phenyl substituted compounds (acetylated, O‐unprotected) and the acetylated 4‐acetoxymethyl derivative existed in solution as a single form (d.r.>95:5), as shown by NMR spectroscopic analysis. The two 4‐phenyl substituted structures were unambiguously identified for the first time by X‐ray diffraction analysis, as atropisomers with aR stereochemistry. This represents one of the first efficient and highly atropodiastereoselective approaches to glucose‐based bis‐triazoles as single atropisomers. The products were purified by standard silica gel chromatography. Through Sonogashira or Suzuki cross‐couplings, the 1‐glucosyl‐5‐halogeno‐1,2,3‐triazoles were efficiently converted into a library of 1,2,3‐triazoles of the 1‐glucosyl‐5‐substituted (alkynyl, aryl) type. Attempts to achieve Heck coupling to methyl acrylate failed, but a stable palladium‐associated triazole was isolated and analyzed by ¹H NMR and MS. O‐Unprotected derivatives were tested as inhibitors of glycogen phosphorylase. The modest inhibition activities measured showed that 4,5‐disubstituted 1‐glucosyl‐1,2,3‐triazoles bind weakly to the enzyme. This suggests that such ligands do not fit the catalytic site or any other binding site of the enzyme.     

Reaction of Alkynes and Azides: Not Triazoles Through Copper–Acetylides but Oxazoles Through Copper–Nitrene Intermediates

Well‐defined copper(I) complexes of composition [Tpm*^,BrCu(NCMe)]BF₄ (Tpm*^,Br=tris(3,5‐dimethyl‐4‐bromo‐pyrazolyl)methane) or [Tpa^*Cu]PF₆ (Tpa^*=tris(3,5‐dimethyl‐pyrazolylmethyl)amine) catalyze the formation of 2,5‐disubstituted oxazoles from carbonyl azides and terminal alkynes in a direct manner. This process represents a novel procedure for the synthesis of this valuable heterocycle from readily available starting materials, leading exclusively to the 2,5‐isomer, attesting to a completely regioselective transformation. Experimental evidence and computational studies have allowed the proposal of a reaction mechanism based on the initial formation of a copper–acyl nitrene species, in contrast to the well‐known mechanism for the copper‐catalyzed alkyne and azide cycloaddition reactions (CuAAC) that is triggered by the formation of a copper–acetylide complex.     

3‐miktoarm star terpolymers using triple click reactions: Diels–Alder,copper‐catalyzed azide‐alkyne cycloaddition,and nitroxide radical coupling reactions

Well‐defined linear furan‐protected maleimide‐terminated poly(ethylene glycol) (PEG‐MI), tetramethylpiperidine‐1‐oxyl‐terminated poly(ε‐caprolactone) (PCL‐TEMPO), and azide‐terminated polystyrene (PS‐N₃) or ‐poly(N‐butyl oxanorbornene imide) (PONB‐N₃) were ligated to an orthogonally functionalized core ( 1 ) in a two‐step reaction mode through triple click reactions. In a first step, Diels–Alder click reaction of PEG‐MI with 1 was performed in toluene at 110 °C for 24 h to afford α‐alkyne‐α‐bromide‐terminated PEG (PEG‐alkyne/Br). As a second step, this precursor was subsequently ligated with the PCL‐TEMPO and PS‐N₃ or PONB‐N₃ in N,N‐dimethylformamide at room temperature for 12 h catalyzed by Cu(0)/Cu(I) through copper‐catalyzed azide‐alkyne cycloaddition and nitroxide radical coupling click reactions, yield resulting ABC miktoarm star polymers in a one‐pot mode. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Metal‐Free Synthesis of Functional 1‐Substituted‐1,2,3‐Triazoles from Ethenesulfonyl Fluoride and Organic Azides

The boom in growth of 1,4‐disubstituted triazole products, in particular, since the early 2000’s, can be largely attributed to the birth of click chemistry and the discovery of the Cu^I‐catalyzed azide–alkyne cycloaddition (CuAAC). Yet the synthesis of relatively simple, albeit important, 1‐substituted‐1,2,3‐triazoles has been surprisingly more challenging. Reported here is a straightforward and scalable click‐inspired protocol for the synthesis of 1‐substituted‐1,2,3‐triazoles from organic azides and the bench stable acetylene surrogate ethenesulfonyl fluoride (ESF). The new transformation tolerates a wide selection of substrates and proceeds smoothly under metal‐free conditions to give the products in excellent yield. Under controlled acidic conditions, the 1‐substituted‐1,2,3‐triazole products undergo a Michael addition reaction with a second equivalent of ESF to give the unprecedented 1‐substituted triazolium sulfonyl fluoride salts.     

Novel Hyperbranched Poly([1,2,3]‐triazole)s Derived from AB2 Monomers by a 1,3‐Dipolar Cycloaddition

Summary: Novel hyperbranched poly([1,2,3]‐triazole)s were synthesized from several AB₂ monomers by a 1,3‐dipolar cycloaddition reaction. The compound 3,5‐bis(propargyloxy)benzyl azide was polymerized thermally at room temperature leading to 1,4‐ and 1,5‐disubstituted poly([1,2,3]‐triazole) and catalytically leading only to the 1,4‐disubstituted poly([1,2,3]‐triazole). Only the thermal reaction led to fully soluble products. The AB₂ monomers containing an internal alkyne A unit could be autopolymerized thermally under mild reaction conditions leading to soluble, high‐molecular‐weight hyperbranched poly([1,2,3] triazole)s. All products were characterized by detailed NMR investigations.

Synthesis route for polymers 8a and 8b .     

In‐column preparation of a brush‐type chiral stationary phase using click chemistry and a silica monolith

Brush‐type chiral stationary phases (CSP) have been prepared both from a silica monolith and, separately, from 10 μm porous silica beads via a process of in‐column modification including attachment of the chiral selector via copper‐catalyzed azide–alkyne cycloaddition. Azide functionalities were first introduced on the pore surface of each type of support by reaction with 3‐(azidopropyl)trimethoxysilane, followed by immobilization of a proline‐derived chiral selector containing an alkyne moiety. This functionalization reaction was carried out in dimethylformamide (DMF) in the presence of catalytic amounts of copper (I) iodide. The separation performance of these triazole linked stationary phases was demonstrated in enantioseparations of four model analytes, which afforded separation factors as high as 11.4.