Development and application of the tartrazine voltammetric sensors based on molecularly imprinted polymers

A modified glassy carbon electrode was prepared as an electrochemical voltammetric sensor based on molecularly imprinted polymer film for tartrazine (TT) detection. The sensitive film was prepared by copolymerization of tartrazine and acrylamide on the carbon nanotube-modified glassy carbon electrode. The performance of the imprinted sensor was investigated by cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy in detail. Under the optimum conditions, two dynamic linear ranges of 8?×?10^?8 to 1?×?10^?6?mol?L^?1 and 1?×?10^?6 to 1?×?10^?5?mol?L^?1 were obtained, with a detection limit of 2.74?×?10^?8?mol?L^?1(S/N?=?3). This sensor was used successfully for tartrazine determination in beverages.     

High Sensitive Detection of Prostate Specific Antigen by Using Ferrocene Cored Asymmetric PAMAM Dendrimer Interface Screen Printed Electrodes

In this study, electrochemical immunosensors were developed for the detection of prostate specific antigen (PSA) using ferrocene (Fc) and polyamidoamine dendrimer (PAMAM) constructs. The biosensor fabrication was designed by modifying the screen‐printed gold electrode (Au) with ferrocene cored dendrimers (FcPAMAM) synthesized in three different generations. The self‐assembled monolayer principle was followed, to obtain sensitive, selective and disposable electrodes. Therefore, the Au electrodes were modified with cysteamine (Cys) to obtain a functional surface for FcPAMAM dendrimers to bind. Dendrimer generations were attached to this surface using a cross‐linker (glutaraldehyde) so that a suitable surface was obtained for binding of biological components. The Monoclonal PSA antibody (anti‐PSA) was immobilized on the Au electrode surface which coated with dendrimer, and (Au/Cys/FcPAMAM/anti‐PSA) biosensing electrode was obtained. The PSA detection performances of electrochemical impedance spectroscopy (EIS) and Amperometry based immunosensors exhibited very low detection limits; 0.001 ng mL^?1 and 0.1 pg mL^?1, respectively. In addition, EIS and Amperometry based biosensors using Au/Cys/FcPAMAM/anti‐PSA sensing electrode were represented excellent linear ranges of 0.01 ng mL^?1 to 100 ng mL^?1 and 0.001 ng mL^?1 to 100 ng mL^?1. In order to determine the applicability recovery and selectivity tests were performed using three different proteins in human serum.     

Electrochemical preparation of a novel type of C-dots/ZrO2 nanocomposite onto glassy carbon electrode for detection of organophosphorus pesticide

A selective, sensitive novel electrochemical sensor for detection of methyl parathion on the preparation of a carbon dots (C-dots)/ZrO₂ nanocomposite was developed. The C-dots/ZrO₂ nanocomposite was fabricated using electrochemical deposition onto a glassy carbon electrode and characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and cyclic voltammetry. The optimum parameters such as effect of pH, accumulation time, accumulation potential, scan rate, effect of amount of C-dots and effect of amount of ZrO₂ were investigated. The C-dots/ZrO₂ modified glassy carbon electrode allowed rapid, selective determination of methyl parathion in rice samples by adsorptive stripping voltammetry. The stripping response was highly linear over the methyl parathion concentrations ranging from 0.2 ng mL^?1 to 48 ng mL^?1, with a detection limit of 0.056 ng mL^?1. This novel electrochemical nanocomposite-based electrochemical sensor was successfully applied for the detection of methyl parathion in rice samples.     

以聚吡咯和纳米金为基质基于电化学交流阻抗测试的乙肝表面抗原免疫传感器研究

A novel simple immunosensing strategy for fabrication of hepatitis B surface antigen detection has been developed via electrochemical impedance spectroscopy （EIS） as a platform. At first, the conductive polymer polypyrrole （PPy） film was electrodeposited on a platinum electrode surface to adsorb the gold nanoparticles （nano-Au） via the opposite-charged adsorption technique, and then hepatitis B surface antibodies were adsorbed onto the surface of nano-Au. The modification procedure was characterized by EIS. Such spectroscopy is attributed to the concomitant conductivity changes of the polymerized pyrrole film and gold nanoparticles. The factors influencing the performance of resulting immunoelectrode were studied in detail. The linear range of the resulting immunoelectrode is from 2.6 to 153.6 ng.mL^-1 with a detection limit of 1.3 ng·mL^-1 at 3σ. In addition, the experiment results indicate that antibody immobilized on this way exhibits a good sensitivity, selectivity, high stability and a long-term maintenance of bioactivity, implying a great promising alternative approach for reagentless immunosensing analysis in the clinical diagnosis.     

A Highly Sensitive Electrochemical Impedance Spectroscopy Immunosensor for Determination of 1‐Pyrenebutyric Acid Based on the Bifunctionality of Nafion/Gold Nanoparticles Composite Electrode

A simple, highly sensitive and label‐free electrochemical impedance spectroscopy (EIS) immunosensor was developed using Nafion and gold nanoparticles (nano‐Au/Nafion) composites for the determination of 1‐pyrenebutyric acid (PBA). Under the optimal conditions, the amount of immobilized antibody was significantly improved on the nano‐Au/Nafion electrode due to the synergistic effect and biocompatibility of Nafion film and gold nanoparticles composites. The results showed that the sensitivity and stability of nano‐Au/Nafion composite electrode for PBA detection were much better than those of nano‐Au modified glassy carbon electrode (nano‐Au/GCE). The plot of increased electron transfer resistances (R_ets) against the logarithm of PBA concentration is linear over the range from 0.1 to 150 ng·mL^?1 with the detection limit of 0.03 ng·mL^?1. The selectivity and accuracy of the proposed EIS immunosensor were evaluated with satisfactory results.     

CdSe Quantum Dots Based Electrochemiluminescence Immunosensor with Simple Structure for Ultrasensitive Detection of Salbutamol

A rapid and ultrasensitive electrochemiluminescence (ECL) competitive immunoassay based on CdSe quantum dots (QDs) and the shorter chain as possible (cysteamine and glutaraldehyde) has been designed for the detection of salbutamol (SAL). Cysteamine and glutaraldehyde made coating antigen immobilize well on the gold electrode surface through the reaction between functional groups, which brought about the simplicity of the immunosensor to some extent. Transmission electron microscopy image, dynamic light scattering, photoluminescence, ultraviolet‐visible absorption and electrochemical impedance spectra were used to characterize the prepared CdSe QDs and the cysteamine/glutaraldehyde/Ovalbumin‐SAL/anti‐SAL‐QDs immunosensor. In the air‐saturated PBS buffer containing 0.1 M K₂S₂O₈ and 0.1 M KCl (pH 9.0), a strong ECL emission of QDs can be observed which depended linearly on the logarithm of the salbutamol concentration with a wide range from 0.05 ng mL^?1 to 100 ng mL^?1, and a detection limit of 0.0056 ng mL^?1. The sensitivity, repeatability, and specificity of the ECL immunosensor have been evaluated. The sensor has been applied to real samples with satisfactory results. This work will open new ways of detecting food additive residue based on QDs ECL in immunoassays.     

Sensitive Quantification of Fe(III) in Food Samples at Screen Printed Carbon Electrode Modified with Graphene and Piroxicam by Catalytic Adsorptive Voltammetry

A new disposable sensitive voltammetric sensor for the determination of Fe(III) based on a graphene (G) and piroxicam (Pir) modified screen printed carbon electrode (Pir/G/SPCE) has been developed. The developed method is based on accumulation of Fe(III) on the surface of the prepared sensor strip, formation a complex with Pir and subsequent reduction the adsorbed chelated Fe(III) at ?0.03 V (vs. Ag/AgCl) coupled with the catalytic enhancement of bromate. Characterizations of the modified electrode surface were performed by field emission scanning electron microscopy (FE‐SEM), energy dispersive X‐ray spectroscopy (EDX) and electrochemical impedance spectroscopy (EIS). Electrochemical behavior of the modified SPCEs was investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Under the optimum conditions, the catalytic voltammetric method exhibited linear calibration plot in the concentration ranges of 1–100 ng mL^?1 and 100–3500 ng mL^?1 Fe(III) with a limit of detection of 0.3 ng mL^?1. The sensor strip displayed good reproducibility with 1.7 % relative standard deviation (RSD%). The developed method was successfully applied for the determination of iron in food samples such as vegetables, fruit, and cereal.     

Label-free electrochemical impedance spectroscopy biosensor for the determination of human immunoglobulin G

A simple and sensitive biosensor was developed for the determination of human immunoglobulin G (IgG). Protein A was employed as molecular receptor and electrochemical impedance spectroscopy (EIS) was used as detection technique. The biosensor was obtained by self-assembling protein A on a gold electrode. The surface morphology of the self-assembled layer before and after interaction with IgG was studied by atomic force microscopy. Protein A bound specifically to the Fc portion of IgG, and this caused a change in the resistance of the interfacial electron transfer when using a ferrocyanide redox couple as a probe. The increase of the resistance of the electron transfer was linearly related to the concentration of IgG in the range from 10 ng.mL^?1 to 1.0 μg.mL^?1, with a detection limit of 5 ng.mL^?1. The work demonstrates that protein A is a versatile matrix for the immobilization of antibodies.     

Sandwich Immunoassay for Hepatitis C Virus Non-Structural 5A Protein Using a Glassy Carbon Electrode Modified with an Au-MoO3/Chitosan Nanocomposite

A novel electrochemical immunosensor was prepared for the detection of the hepatitis C virus non-structural 5A protein. A glassy carbon electrode was modified with an Au-MoO₃/Chitosan nanocomposite that warranted good conductivity and biocompatibility. Mesoporous silica with a large specific surface served as a nanocarrier for horseradish peroxidase and the polyclonal antibody as the reporter probe. The immunosensor was characterized by scanning electron microscopy, electrochemical impedance spectroscopy, and cyclic voltammetry. Following the sandwich-type immunoreaction, horseradish peroxidase was efficiently captured on the surface of the electrode to catalyze the decomposition of hydrogen peroxide. The analytical signal was obtained as an amperometric i-t curve (chronoamperometry). The assay reported here had a wide detection range (1 ng mL^?1 ?50 µg mL^?1) and detection limit as low as 1 ng mL^?1 of hepatitis C virus non-structural 5A protein. The electrochemical biosensor experiments showed excellent reproducibility, high selectivity, and outstanding stability for the determination of hepatitis C virus non-structural 5A protein, and it was successfully applied to the detection of the analyte in real serum samples.     

Fe3O4 Nanorods-RGO-ionic Liquid Nanocomposite Based Electrochemical Sensor for Aflatoxin B1 in Ground Paprika

A novel and sensitive method for the determination of aflatoxin B1 (AFA−B1) in ground paprika using a methyltrioctylammonium chloride ionic liquid (IL), iron oxide nanorods (Fe₃O₄ nanorods) and reduced graphene oxide (RGO) fabricated glassy carbon electrode (GCE) was developed. The synthesized nanoparticles, nanocomposites and modified electrode surfaces were characterized by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), thermogravimetric analysis (TGA/DSC) and x-ray diffraction (XRD) analyses. Moreover, the electrochemical performance of the developed sensor was determined by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The obtained results demonstrate that the sensitivity of AFA−B1 is significantly enhanced on RGO-Fe₃O₄ nanorods-IL-GCE in comparison with bare GCE, RGO-GCE and RGO-Fe₃O₄ nanorods-GCE. The redox peak currents of AFA−B1 exhibited good linear relationship with its concentration in the range from 0.02 to 0.33 ng mL⁻¹ with detection limit of (LOD) 0.03 ng mL⁻¹ and limit of quantification (LOQ) 0.36 ng mL⁻¹ respectively (S/N=3). In addition, the fabricated electrode showed good stability and reproducibility. The proposed technique was effectively applied to identify the AFA−B1 in real ground paprika samples with acceptable results.     

Polyaniline Nanowire Arrays Deposited on Porous Carbon Derived from Raffia for Electrochemical Detection of Imidacloprid

An electrochemical sensor based on raffia derived porous carbon (RPC) and polyaniline (PANI) composite functional glass carbon electrode (GCE) was constructed for imidacloprid (IMI) determination. PANI nanowire arrays were deposited on RPC surface uniformly without aggregations. The electrochemical response of IMI at RPC@PANI/GCE is about four times than that at bare GCE, indicating high electrocatalytic activity of RPC@PANI towards IMI reduction. The prepared sensor also offers a wide linear range of 0.1–70 μg mL⁻¹ for IMI determination with a limit of detection (LOD) of 0.03 μg mL⁻¹. In addition, it offers high recoveries with testing real samples.     

Fabrication of Immunosensor Based on Polyaniline,Fullerene‐C60 and Palladium Nanoparticles Nanocomposite: An Electrochemical Detection Tool for Prostate Cancer

Present work demonstrates the fabrication of new and facile sandwich‐type electrochemical immunosensor based on palladium nanoparticles (PdNPs), polyaniline (PANI) and fullerene‐C₆₀ nanocomposite film modified glassy carbon electrode (PdNP@PANI‐C₆₀/GCE) for ultrasensitive detection of Prostate‐specific antigen (PSA) biomarker. PdNP@PANI‐C₆₀ was electrochemically synthesized on GCE and used as an electroactive substrate. PdNP@PANI‐C₆₀ was characterized by scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDS), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Primary antibody anti‐PSA (Ab1) was covalently immobilized on PdNP@PANI‐C₆₀/GCE using NHS/EDC linkers. In the presence of PSA antigen, horseradish peroxidase secondary antibody (HRP‐Ab2) was brought into the surface of the electrode, developing stable amplified signals of H₂O₂ reduction. Under the optimal conditions, a linear curve for determination of PSA at the proposed immunosensor was 1.6×10^?4 ng.mL^?1 to 38 ng.mL^?1 with a limit of detection (LOD) of 1.95×10^?5 ng.mL^?1. The proposed immunosensor was successfully validated in serum and urine samples towards PSA detection with satisfactory and acceptable results.     

Voltammetric Immunoassay for the Detection of Protein Biomarkers

A strategy for a fast (ca. 20 min), specific, electrochemical immunoassay for the cardiac biomarker creatine kinase (CK) and the human cytokine interleukin 10 (IL10) has been developed in this paper. The polyaniline modified gold surface formed from electrochemical reduction of diazonium salt supplies a solid substrate to link the activated carboxylic acid groups from the antibodies, which were labelled with ferrocene. The direct electrochemistry of ferrocene allows the analysis of protein markers with good sensitivity. The creatine kinase sensor demonstrates limit of detection of 0.5 pg mL^?1 in a physiological Krebs‐Henseleit solution. The anti‐IL10 antibody retained fluorescence activity after further coupling to ferrocene and covalent immobilization on to a gold electrode, showing a linear detection range for IL‐10 from 0.001 ng mL^?1 to 50 ng mL^?1 in PBS. We attribute the high sensitivity to the well‐controlled modified surface which results in end–on antibodies that can specifically capture the antigen with ease.     

A Hydrogen Peroxide Sensor Based on Silver Nanoparticles Biosynthesized by Bacillus subtilis

In this study, silver nanoparticles （AgNPs） were biosynthesized by Bacillus subtilis and used to construct a nonenzymatic hydrogen peroxide （H202） sensor, Scanning electron microscopy, transmission electron microscopy and energy dispersive spectroscopy confirmed that the AgNPs were prepared successfully with spherical morphol- ogy. The electrochemical properties of the resulted sensor were investigated by cyclic voltammetry, chronoam- perometry and electrochemical impedance spectroscopy. It was found that the sensor exhibited good electrocatalytic activity towards H202 reduction with a wider linear range from 0.05 to 120 mmol.L-1, a detection limit of 8 gmol.L-1 and a fast response time less than 2 s. The sensor exhibited good selectivity for H202 determination in the presence of glucose, acetaminophen, ascorbic acid and uric acid.     

Electrochemical Immunosensor Made with Zein-based Nanofibers for On-site Detection of Aflatoxin B1

A disposable electrochemical immunosensor for on-site detection of aflatoxin B1(AFB1), one of the most toxic mycotoxins in agri-food products, was fabricated through a low-cost cut-printing method and then modified with zein/polypyrrole(PPy) electrospun nanofibers onto which anti-AFB1 monoclonal antibodies were immobilized covalently. Fabrication was possible with an innovative and simple approach to adsorb nanofibers onto the working electrode during electrospinning. Electrochemical impedance spectroscopy was employed as the principle of detection, and the data collected with a portable potentiostat were treated with information visualization techniques. The nanostructured immunosensor showed a high sensitivity for AFB1 with a linear detection range from 0.25 to 10 ng mL⁻¹ and a theoretical limit of detection of 0.092 ng mL⁻¹, which is adequate to detect AFB1 in food, according to regulatory agencies.     

Polyaniline Sheathed Black Phosphorous: A Novel,Advanced Platform for Electrochemical Sensing Applications

Despite its excellent properties, the inherent unstable nature of black phosphorus (BP) in ambient atmosphere has severely restricted its use in electrochemical sensing applications. In this work, polyaniline (PANI) sheathed BP was prepared via the electrochemical polymerisation of aniline on BP coated screen printed carbon electrode (i. e., SPCE/BP) which resulted in an efficient, stable electrochemical platform (i. e., SPCE/BP@PANI) with improved properties which was evaluated for electrochemical detection of two model bioanalytes namely, ascorbic acid (AA) and Hydrazine (Hy). The formation of PANI on the SPCE/BP exhibited a pair of stable and well‐defined redox peaks indicating the better adsorption energy and fast electron transfer nature of BP as compared to other 2D materials like graphene and transitional metal dichalcogenides. FESEM and XPS studies revealed the formation and uniform growth of PANI on BP surface without any aggregation. Electrochemical impedance spectroscopy analyses revealed that SPCE/BP@PANI can act as a suitable electrocatalyst material for the sensing of AA and Hy. Thus, SPCE/BP@PANI electrode exhibited low limit of detection (D_L; 1.69 μM), excellent reproducibility and better selectivity towards AA oxidation over glucose, sucrose, urea, citric acid, sodium, nitrate, nitrite and magnesium with a sensitivity of 3.38 A M^?1 cm^?2 (R²=0.98) in the dynamic range of 10–1100 μM. The excellent analytical performance of the BP@PANI is plausible due to better adsorption energy and fast electron transfer of BP. Further, SPCE/BP@PANI was also used for successful detection of AA in processed fruit juice with good recovery. Under the optimal DPV conditions, the modified electrode was extended for detection of Hy in a linear range of 100–1500 μM with sensitivity of 0.09 A M^?1 cm^?2 (R²=0.99) and D_L=89 μM validating the potential of BP based composites in wide range of electrochemical applications.     

Potentiometric Immunosensor Based on Immobilization of Hepatitis B Surface Antibody on Platinum Electrode Modified Silver Colloids and Polyvinyl Butyral as Matrixes

A highly sensitive immunosensor based on immobilization of hepatitis B surface antibody (HBsAb) on platinum electrode (Pt) modified silver colloids and polyvinyl butyral (PVB) as matrixes has been developed for potentiometric immunoanalysis to detect hepatitis B surface antigen (HBsAg) in this study. HBsAb molecules were immobilized successfully on nanometer‐sized silver colloid particles associated with polyvinyl butyral on a platinum electrode surface. The modification procedure was electrochemically monitored by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The HBsAb‐silver‐PVB‐modified electrode exhibited direct electrochemical behavior toward HBsAg. The factors influencing the performance of the resulting immunosensor were studied in detail. More than 94.7% of the results of human serum samples obtained by this method were in agreement with those obtained by enzyme‐linked immunosorbent assays (ELISAs). The resulting immunosensor exhibited a sigmoid curve with log HBsAg concentration, high sensitivity (39.8 mV/decade), wide linear range from 16.0 to 800 ng mL^?1 with a detection limit of 3.6 ng mL^?1, fast potentiometric response (<3 min) and long‐term stability (>4 months). The response mechanism of the immunosensors was also studied with AC impedance techniques.     

An Electrochemical Immunosensor Based on SPA and rGO-PEI-Ag-Nf for the Detection of Arsanilic Acid

A sensitive electrochemical immunosensor was prepared for rapid detection of ASA based on arsanilic acid (ASA) monoclonal antibody with high affinity. In the preparation of nanomaterials, polyethyleneimine (PEI) improved the stability of the solution and acted as a reducing agent to generate reduced graphene oxide (rGO) with relatively strong conductivity, thereby promoting the transfer of electrons. The dual conductivity of rGO and silver nanoparticles (AgNPs) improved the sensitivity of the sensor. The synthesis of nanomaterials were confirmed by UV-Vis spectroscopy, X-ray diffraction, transmission electron microscopy and scanning electron microscopy. In the optimal experiment conditions, the sensor could achieve the detection range of 0.50–500 ng mL⁻¹ and the limit of detection (LOD) of 0.38 ng mL⁻¹ (S/N = 3). Moreover, the sensor exhibited excellent specificity and acceptable stability, suggesting that the proposed sensor possessed a good potential in ASA detection. Thus, the as-prepared biosensor may be a potential way for detecting other antibiotics in meat and animal-derived foods.     

Graphene‐Nafion Composite Film Modified Electrode for Voltammetric Sensor for Determination of Dihydromyricetin

A simple but highly snesitive electrochemical sensor for the determination of dihydromyricetin (DMY) based on graphene‐Nafion nanocomposite film modified Glassy carbon electrode (GCE) was reported. The characteristic of the sensor was examined by scanning electron microscopic (SEM) and electrochemical impedance spectroscopy (EIS). Compares with bare GCE, pre‐anodized glassy carbon electrode (GCE(ox)) and Nafion modified electrode, the sensor exhibited the more superior ability of detecting DMY, due to the synergetic graphene and Nafion. Other, the dependence of the current on pH, instrumental parameters, accumulation time and potential were investigated to optimize the experimental conditions in the determination of DMY. Under the selected conditions, the response peak currents were linear relationship with the DMY concentrations in the range of 8.0 × 10^?8 ～ 2.0 × 10^?5 mol L^?1 with a detection limit of 2.0 × 10^?8 mol L^?1. And, the method was also applied successfully to detect DMY in Ampelopsis grossedentata samples.     

Direct Electrochemical Nano‐immunosensor for Microcystin‐LR in Seawater

Microcystins are potent hepatotoxins produced by cyanobacteria, which proliferate in wastewaters with high nutrient content. Due to their high toxicity and potential risk to human health, even at low concentrations, the development of a sensitive and rapid method for the monitoring of microcystin‐LR (MC‐LR) in water samples is of great importance. In this context, a new direct electrochemical nano‐immunosensor for MC‐LR detection using the liquid crystal (E)‐1‐decyl‐4‐[(4‐decyloxyphenyl)diazenyl]pyridinium bromide (Br‐Py) as a redox probe and gold nanoparticles stabilized in bovine serum albumin (AuNP‐BSA) is described herein. The microcystin‐LR antibody (anti‐MC‐LR) was covalently immobilized using N‐(3‐dimethylaminopropyl)‐N‐ethylcarbodiimide hydrochloride (EDC) and N‐hydroxysuccinimide (NHS) on an AuNP‐BSA/BrPy film. The proposed sensor response is based on the inhibition of the Br‐Py electrochemical signal after the specific interaction of MC‐LR with immobilized anti‐MC‐LR on the electrode surface. The electrochemical behavior of the immunosensor was studied by square‐wave voltammetry (SWV) and electrochemical impedance spectroscopy (EIS). Under optimized conditions, using SWV and an incubation time of 15 min, the immunosensor exhibits a linear response to MC‐LR concentrations of 0.05 to 500.0 ng mL⁻¹ with a detection limit of 0.05 ng mL⁻¹. The anti‐MC‐LR/AuNP‐BSA/Br‐Py/GCE was successfully applied in the determination of MC‐LR in spiked seawater samples.