A highly efficient synthesis of (Z)‐1‐aryl‐2‐silyl‐1‐ stannylethenes and their conversion to (E)‐2‐ arylethenyl‐, (Z)‐2‐(2‐pyridyl)ethenyl‐ and allenyl‐silanes

A Pd(dba)₂–P(OEt)₃ combination allowed the silastannation of arylacetylenes, 1‐hexyne or propargyl alcohols with tributyl(trimethylsilyl)stannane to take place at room temperature, producing (Z)‐2‐silyl‐1‐stannyl‐1‐substituted ethenes in high yields. Novel silyl(stannyl)ethenes were fully characterized by ¹H‐, ¹³C‐, ²⁹Si‐ and ¹¹⁹Sn‐NMR as well as infrared and mass analyses. Treatment of a series of (Z)‐1‐aryl‐2‐silyl‐1‐stannylethenes and (Z)‐1‐(3‐pyridyl)‐2‐silyl‐1‐stannylethene with hydrochloric acid or hydroiodic acid in the presence of tetraethylammonium chloride (TEACl) or tetrabutylammonium iodide (TBAI) led to the exclusive formation of (E)‐trimethyl(2‐arylethenyl)silanes with high stereoselectivity. A similar reaction of (Z)‐1‐(2‐anisyl)‐2‐silyl‐1‐stannylethene also produced E‐type trimethyl[2‐(2‐anisyl)ethenyl]silane, while (Z)‐trimethyl [2‐(2‐pyridyl)ethenyl]silane was produced exclusively from (Z)‐1‐(2‐pyridyl)‐2‐silyl‐1‐stannylethene. Protodestannylation of (Z)‐1‐[hydroxy(phenyl)methyl]‐2‐silyl‐1‐stannylethene with trifluoroacetic acid took place via the β‐elimination of hydroxystannane, providing trimethyl(3‐phenylpropa‐1,2‐dienyl)silane quite easily. The destannylation products were also fully characterized. Copyright © 2007 John Wiley & Sons, Ltd.     

Acyclic diene metathesis polymerization of 2,5‐dialkyl‐1,4‐divinylbenzene with molybdenum or ruthenium catalysts: Factors affecting the precise synthesis of defect‐free,high‐molecular‐weight trans‐poly(p‐phenylene vinylene)s

Factors affecting the syntheses of high‐molecular‐weight poly(2,5‐dialkyl‐1,4‐phenylene vinylene) by the acyclic diene metathesis polymerization of 2,5‐dialkyl‐1,4‐divinylbenzenes [alkyl = n‐octyl ( 2 ) and 2‐ethylhexyl ( 3 )] with a molybdenum or ruthenium catalyst were explored. The polymerizations of 2 by Mo(N‐2,6‐Me₂C₆H₃) (CHMe₂ Ph)[OCMe(CF₃)₂]₂ at 25 °C was completed with both a high initial monomer concentration and reduced pressure, affording poly(p‐phenylene vinylene)s with low polydispersity index values (number‐average molecular weight = 3.3–3.65 × 10³ by gel permeation chromatography vs polystyrene standards, weight‐average molecular weight/number‐average molecular weight = 1.1–1.2), but the polymerization of 3 was not completed under the same conditions. The synthesis of structurally regular (all‐trans), defect‐free, high‐molecular‐weight 2‐ethylhexyl substituted poly(p‐phenylene vinylene)s [poly 3 ; degree of monomer repeating unit (DP_n) = ca. 16–70 by ¹H NMR] with unimodal molecular weight distributions (number‐average molecular weight = 8.30–36.3 × 10³ by gel permeation chromatography, weight‐average molecular weight/number‐average molecular weight = 1.6–2.1) and with defined polymer chain ends (as a vinyl group, ? CH?CH₂) was achieved when Ru(CHPh)(Cl)₂(IMesH₂)(PCy₃) or Ru(CH‐2‐OⁱPr‐C₆H₄)(Cl)₂(IMesH₂) [IMesH₂ = 1,3‐bis(2,4,6‐trimethylphenyl)‐2‐imidazolidinylidene] was employed as a catalyst at 50 °C. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6166–6177, 2005     

Synthesis of 2,2,5,5‐Tetrasubstituted 1,4‐Dioxa‐2,5‐disilacyclohexanes via Organotin(IV)‐Catalyzed Transesterification of (Acetoxymethyl)alkoxysilanes

(Acetoxymethyl)silanes 2 , 7 a – c , and 10 a – c with at least one alkoxy group, of the general formula (AcOCH₂)Si(OR)_3?n(CH₃)_n (R: Me, Et, iPr; n=0, 1, 2), were synthesized from the corresponding (chloromethyl)silanes 1 , 6 a – c , and 9 a – c by treatment with potassium acetate under phase‐transfer‐catalysis conditions. These compounds were found to provide 2,2,5,5‐organo‐substituted 1,4‐dioxa‐2,5‐disilacyclohexanes 3 , 8 a – c , and 11 a – c if treated with organotin(IV) catalysts such as dioctyltin oxide. The reaction proceeds through transesterification of the acetoxy and alkoxy units followed by ring‐closure to form a dimeric six‐membered ring. The corresponding alkyl acetates are formed as the reaction by‐products. With these mild conditions, the method overcomes the drawbacks of previously reported synthetic routes to furnish 2,2,5,5‐tetramethyl‐1,4‐dioxa‐2,5‐disilacyclohexane ( 3 ) and even allows the synthesis of 1,4‐dioxa‐2,5‐disilacyclohexanes bearing hydrolytically labile alkoxy substituents at the silicon atom in good yields and high purity. These new materials were fully characterized by NMR spectroscopy, elemental analysis, mass spectrometry, and X‐ray analysis (trans‐ 8 a ).     

An Imidazoline–Aminophenol (IAP) Nickel Catalyst: Structure and Catalytic Activity in the Enantioselective 1,4‐Addition of 3′‐Indolyl‐3‐Oxindoles to Nitroethylene

The structure of a nickel complex of imidazoline–aminophenol (IAP) prepared from IAP with Ni(OAc)₂ was elucidated as cis‐bis(imidazolineaminophenoxide) [Ni(IAP)₂]. The [Ni(IAP)₂] complex smoothly promoted catalytic asymmetric 1,4‐addition of 3′‐indolyl‐3‐oxindole to nitroethylene to provide chiral mixed 3,3′‐bisindoles with high enantioselectivities. Mechanistic studies using ESI‐MS analyses suggest that one IAP ligand dissociated from [Ni(IAP)₂] to generate the Ni–enolate of 3′‐indolyl‐3‐oxindole. From the optically active 3,3′‐mixed indole adduct, biologically important 3′‐indolyl‐3‐pyrrolidinoindoline was successfully synthesized in a three‐step reaction sequence.     

Bromine/para‐Toluenesulfonic Acid‐Catalyzed Synthesis of 3,3‐Bis(indole‐3‐yl)indoline‐2‐ (1H)‐ones by Condensing Indoles with Isatins

Under the catalysis of only 3 mol% of Br₂ at room temperature, indoles reacted rapidly with isatins to form biologically important 3,3‐bis(indole‐3‐yl)indoline‐2‐(1H)‐ones with high efficiency and wide substrate scope. Moreover, we demonstrated that p‐toluenesulfonic acid (TsOH) could serve as a surrogate to catalyze this transformation.     

Catalytic Asymmetric Inverse‐Electron‐Demand Oxa‐Diels–Alder Reaction of In Situ Generated ortho‐Quinone Methides with 3‐Methyl‐2‐Vinylindoles

The first catalytic asymmetric inverse‐electron‐demand (IED) oxa‐Diels–Alder reaction of ortho‐quinone methides, generated in situ from ortho‐hydroxybenzyl alcohols, has been established. By selecting 3‐methyl‐2‐vinylindoles as a class of competent dienophiles, this approach provides an efficient strategy to construct an enantioenriched chroman framework with three adjacent stereogenic centers in high yields and excellent stereoselectivities (up to 99 % yield, >95:5 d.r., 99.5:0.5 e.r.). The utilization of ortho‐hydroxybenzyl alcohols as precursors of dienes and 3‐methyl‐2‐vinylindoles as dienophiles, as well as the hydrogen‐bonding activation mode of the substrates met the challenges of a catalytic asymmetric IED oxa‐Diels–Alder reaction.     

Cobalt‐Catalyzed Cross‐Coupling of Functionalized Alkylzinc Reagents with (Hetero)Aryl Halides

A combination of 10 % CoCl₂ and 20 % 2,2′‐bipyridine ligands enables cross‐coupling of functionalized primary and secondary alkylzinc reagents with various (hetero)aryl halides. Couplings with 1,3‐ and 1,4‐substituted cycloalkylzinc reagents proceeded diastereoselectively leading to functionalized heterocycles with high diastereoselectivities of up to 98:2. Furthermore, alkynyl bromides react with primary and secondary alkylzinc reagents providing the alkylated alkynes.     

Enzymatic Synthesis of Acylphloroglucinol 3‐C‐Glucosides from 2‐O‐Glucosides using a C‐Glycosyltransferase from Mangifera indica

A green and cost‐effective process for the convenient synthesis of acylphloroglucinol 3‐C‐glucosides from 2‐O‐glucosides was exploited using a novel C‐glycosyltransferase (MiCGTb) from Mangifera indica. Compared with previously characterized CGTs, MiCGTb exhibited unique de‐O‐glucosylation promiscuity and high regioselectivity toward structurally diverse 2‐O‐glucosides of acylphloroglucinol and achieved high yields of C‐glucosides even with a catalytic amount of uridine 5′‐diphosphate (UDP). These findings demonstrate for the first time the significant potential of a single‐enzyme approach to the synthesis of bioactive C‐glucosides from both natural and unnatural acylphloroglucinol 2‐O‐glucosides.     

The Cobalt Way to Angucyclinones: Asymmetric Total Synthesis of the Antibiotics (+)‐Rubiginone B2, (−)‐Tetrangomycin,and (−)‐8‐O‐Methyltetrangomycin

A cobalt(I)‐mediated convergent and asymmetric total synthesis of angucyclinones with an aromatic B ring has been developed. In the course of our research, we synthesized three naturally occurring anguclinone derivatives, namely, (+)‐rubiginone B₂ ( 1 ), (?)‐8‐O‐methyltetrangomycin ( 2 ), and (?)‐tetrangomycin ( 3 ). By combining 3‐hydroxybenzoic acid, 3‐methoxybenzoic acid, citronellal, and geraniol as starting materials in a convergent way, we were able to synthesize chiral triyne chains, which were cyclized with [CpCo(C₂H₄)₂] (Cp=cyclopentadienyl) by means of an intramolecular [2+2+2] cycloaddition to their corresponding tetrahydrobenzo[a]anthracenes. Successive oxidation and deprotection steps led to the above‐mentioned natural products 1 – 3 .     

A Noble‐Metal‐Free Nickel(II) Polypyridyl Catalyst for Visible‐Light‐Driven Hydrogen Production from Water

The complex [Ni(bpy)₃]²⁺ (bpy=2,2′‐bipyridine) is an active catalyst for visible‐light‐driven H₂ production from water when employed with [Ir(dfppy)₂(Hdcbpy)] [dfppy=2‐(3,4‐difluorophenyl)pyridine, Hdcbpy=4‐carboxy‐2,2′‐bipyridine‐4′‐carboxylate] as the photosensitizer and triethanolamine as the sacrificial electron donor. The highest turnover number of 520 with respect to the nickel(II) catalyst is obtained in a 8:2 acetonitrile/water solution at pH 9. The H₂‐evolution system is more stable after the addition of an extra free bpy ligand, owing to faster catalyst regeneration. The photocatalytic results demonstrate that the nickel(II) polypyridyl catalyst can act as a more effective catalyst than the commonly utilized [Co(bpy)₃]²⁺. This study may offer a new paradigm for constructing simple and noble‐metal‐free catalysts for photocatalytic hydrogen production.     

Cationic Ir/Me‐BIPAM‐Catalyzed Asymmetric Intramolecular Direct Hydroarylation of α‐Ketoamides

Asymmetric intramolecular direct hydroarylation of α‐ketoamides gives various types of optically active 3‐substituted 3‐hydroxy‐2‐oxindoles in high yields with complete regioselectivity and high enantioselectivities (84–98 % ee). This is realized by the use of the cationic iridium complex [Ir(cod)₂](BAr^F₄) and the chiral O‐linked bidentate phosphoramidite (R,R)‐Me‐BIPAM.     

Total Synthesis of (R,R,R)‐α‐Tocopherol Through Asymmetric Cu‐Catalyzed 1,4‐Addition

By introducing a disposable activating substituent at C‐3, the asymmetric 1,4‐addition to a notoriously unreactive 2‐substituted chromenone was achieved with high levels of (2R)‐stereoselectivity in the presence of a chiral Cu^I‐phosphoramidite complex as a catalyst. This paved the way for an efficient and conceptually novel synthesis of (R,R,R)‐α‐tocopherol from readily available starting materials.     

Heterogeneous versus Homogeneous Copper(II) Catalysis in Enantioselective Conjugate‐Addition Reactions of Boron in Water

We have developed Cu^II‐catalyzed enantioselective conjugate‐addition reactions of boron to α,β‐unsaturated carbonyl compounds and α,β,γ,δ‐unsaturated carbonyl compounds in water. In contrast to the previously reported Cu^I catalysis that required organic solvents, chiral Cu^II catalysis was found to proceed efficiently in water. Three catalyst systems have been exploited: cat. 1: Cu(OH)₂ with chiral ligand L1 ; cat. 2: Cu(OH)₂ and acetic acid with ligand L1 ; and cat. 3: Cu(OAc)₂ with ligand L1 . Whereas cat. 1 is a heterogeneous system, cat. 2 and cat. 3 are homogeneous systems. We tested 27 α,β‐unsaturated carbonyl compounds and an α,β‐unsaturated nitrile compound, including acyclic and cyclic α,β‐unsaturated ketones, acyclic and cyclic β,β‐disubstituted enones, acyclic and cyclic α,β‐unsaturated esters (including their β,β‐disubstituted forms), and acyclic α,β‐unsaturated amides (including their β,β‐disubstituted forms). We found that cat. 2 and cat. 3 showed high yields and enantioselectivities for almost all substrates. Notably, no catalysts that can tolerate all of these substrates with high yields and high enantioselectivities have been reported for the conjugate addition of boron. Heterogeneous cat. 1 also gave high yields and enantioselectivities with some substrates and also gave the highest TOF (43 200 h^?1) for an asymmetric conjugate‐addition reaction of boron. In addition, the catalyst systems were also applicable to the conjugate addition of boron to α,β,γ,δ‐unsaturated carbonyl compounds, although such reactions have previously been very limited in the literature, even in organic solvents. 1,4‐Addition products were obtained in high yields and enantioselectivities in the reactions of acyclic α,β,γ,δ‐unsaturated carbonyl compounds with diboron 2 by using cat. 1, cat. 2, or cat. 3. On the other hand, in the reactions of cyclic α,β,γ,δ‐unsaturated carbonyl compounds with compound 2 , whereas 1,4‐addition products were exclusively obtained by using cat. 2 or cat. 3, 1,6‐addition products were exclusively produced by using cat. 1. Similar unique reactivities and selectivities were also shown in the reactions of cyclic trienones. Finally, the reaction mechanisms of these unique conjugate‐addition reactions in water were investigated and we propose stereochemical models that are supported by X‐ray crystallography and MS (ESI) analysis. Although the role of water has not been completely revealed, water is expected to be effective in the activation of a borylcopper(II) intermediate and a protonation event subsequent to the nucleophilic addition step, thereby leading to overwhelmingly high catalytic turnover.     

Palladium‐Catalyzed Cyclization Reaction of o‐Haloanilines,CO2 and Isocyanides: Access to Quinazoline‐2,4(1H,3H)‐diones

Quinazoline‐2,4(1H,3H)‐diones are core structural subunits frequently found in many biologically important compounds. The reaction of 2‐​aminobenzonitrile and CO₂, which was frequently studied, only provided N3‐unsubstituted quinazoline‐2,4(1H,3H)‐dione compounds. Herein we report palladium‐catalyzed cyclization reactions of o‐haloanilines, CO₂ and isocyanides to prepare N3‐substituted quinazoline‐2,4(1H,3H)‐diones. Electron‐rich o‐bromoanilines participated in the cyclization reaction using Cs₂CO₃ at high temperature, and electron‐deficient o‐bromoaniline or o‐iodoaniline substrates conducted the reaction using CsF as base to deliver corresponding quinazoline‐2,4(1H,3H)‐dione products in good yields.     

Pd‐Catalyzed Selective Bifunctionalization of 3‐Iodo‐o‐Carborane by Pd Migration

A palladium‐catalyzed highly selective 3,4‐bifunctionalization of 3‐I‐o‐carborane has been developed, leading to the preparation of 3‐alkenyl‐4‐R‐o‐carboranes (R=alkyl, alkynyl, aryl, allyl, CN, and amido) in high to excellent yields. This protocol combines the sequential activation of cage B(3)?I and B(4)?H bonds by Pd migration from exo‐alkenyl sp² C to cage B(4), which is driven by thermodynamic force. This represents a brand‐new strategy for selective bifunctionalization of carboranes with two different substituents.     

Potassium tert‐Butoxide Catalyzed Synthesis and Characterization of Novel 3‐Aryl‐3‐(phenylthio)‐1‐(thiophen‐3‐yl)propan‐1‐one Derivatives

A series of thiophenyl‐containing 3‐thiophene derivatives ( 4a – 4i ) were prepared via the reaction of chalcone‐analogua compounds ( 3a – 3i ) and thiophenol in the presence of catalytic amount of KOBu‐t in CH₂Cl₂ with moderate to high yields. The mechanistic pathway of the reaction was explained by the Michael‐type addition of thiophenol to chalcone derivatives ( 3a – 3i ).     

Synthesis of 2′‐Deoxy‐1′‐homo‐N‐nucleosides with Anti‐Influenza Activity by Catalytic Methyltrioxorhenium (MTO)/H2O2 Oxyfunctionalization

This paper describes a new route for the synthesis of 1′‐homo‐N‐nucleoside derivatives by means of either methyltrioxorhenium (MTO) or supported MTO catalysts, with H₂O₂ as the primary oxidant. Under these selective conditions, the oxyfunctionalization of the heterocyclic ring and the N heteroatom oxidation were operative processes, regardless of the type of substrate used, that is, purine or pyrimidine derivatives. In addition, the oxidation of 1′‐homo‐N‐thionucleosides, showed the occurrence of site‐specific oxidative nucleophilic substitutions of the heterocyclic ring. The MTO/H₂O₂ system showed, in general, high reactivity under both homogeneous and heterogeneous conditions, affording the final products with high conversion values of substrates and from medium to high yields. Many of the novel 1′‐homo‐N‐nucleoside analogues were active against the influenza A virus, without any cytotoxic effects, retaining their activity in both protected and unprotected forms.     

Bis(2‐(6‐methylpyridin‐2‐yl)‐benzimidazolyl)titanium dichloride and titanium bis(6‐benzimidazolylpyridine‐2‐carboxylimidate): Synthesis,characterization, and their catalytic behaviors for ethylene polymerization

A series of 6‐(benzimidazol‐2‐yl)‐N‐organylpyridine‐2‐carboxamide were synthesized and transformed into 6‐benzimidazolylpyridine‐2‐carboxylimidate as dianionic tridentate ligands. Bis(2‐(6‐methylpyridin‐2‐yl)‐benzimidazolyl)titanium dichloride ( C1 ) and titanium bis(6‐benzimidazolylpyridine‐2‐carboxylimidate) ( C2 – C8 ) were synthesized in acceptable yields. These complexes were systematically characterized by elemental and NMR analyses. Crystallographic analysis revealed the distorted octahedral geometry around titanium in both complexes C1 and C4 . Using MAO as cocatalyst, all complexes exhibited from good to high catalytic activities for ethylene polymerization. The neutral bis(6‐benzimidazolylpyridine‐2‐carboxylimidate)titanium ( C2 – C8 ) showed high catalytic activities and good stability for prolonged reaction time and elevated reaction temperature; however, C1 showed a short lifetime in catalysis as being observed at very low activity after 5 min. The elevated reaction temperature enhanced the productivity of polyethylenes with low molecular weights, whereas the reaction with higher ethylene pressure resulted in better catalytic activity and resultant polyethylenes with higher molecular weights. At higher ratio of MAO to titanium precursor, the catalytic system generated better activity with producing polyethylenes with lower molecular weights. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3411–3423, 2008     

Asymmetric Conjugate Reduction of α,β‐Unsaturated Ketones and Esters with Chiral Rhodium(2,6‐bisoxazolinylphenyl) Catalysts

New asymmetric conjugate reduction of β,β‐disubstituted α,β‐unsaturated ketones and esters was accomplished with alkoxylhydrosilanes in the presence of chiral rhodium(2,6‐bisoxazolinylphenyl) complexes in high yields and high enantioselectivity. (E)‐4‐Phenyl‐3‐penten‐2‐one and (E)‐4‐phenyl‐4‐isopropyl‐3‐penten‐2‐one were readily reduced at 60 °C in 95 % ee and 98 % ee, respectively, by 1 mol % of catalyst loading. (EtO)₂MeSiH proved to be the best hydrogen donor of choice. tert‐Butyl (E)‐β‐methylcinnamate and β‐isopropylcinnamate could also be reduced to the corresponding dihydrocinnamate derivatives up to 98 % ee.     

Continuous‐Flow Suzuki‐Miyaura and Mizoroki‐Heck Reactions under Microwave Heating Conditions

Microwave‐assisted continuous‐flow reactions have attracted significant interest from synthetic organic chemists, especially process chemists from practical points of view, due to a less complicated shift to large‐scale synthesis based on simple and continuous access to products with low energy requirements. In this personal account, we focused on the Suzuki‐Miyaura and Mizoroki‐Heck reactions, both of which are significantly important cross‐coupling reactions for the synthesis of various functional materials. Microwave power is effective for heating. Typical homogeneous palladium catalysts, such as PdCl₂(PPh₃)₂, Pd(PPh₃)₄, and Pd(OAc)₂, as well as heterogeneous palladium catalysts, such as Pd‐film, Pd/Al₂O₃, Pd/SiO₂, and Pd supported on polymers, can be used for these reactions.