Alkyl chain branching in ethylene–vinyl acetate copolymer

Ethylene–vinyl acetate copolymers contain two kinds of side chains: acetoxy branches originating from incorporated vinyl acetate and alkyl branches. The alkyl branching was determined by infrared analysis after converting the ethylene–vinyl acetate copolymer to a hydrocarbon polymer by three steps: hydrolysis, iodation with hydriodic acid containing red phosphorus, and reductive hydrogenation with lithium aluminum hydride. It was found that physical properties such as stiffness were dependent both on the degree of alkyl chain branching and on vinyl acetate content.     

Catalytic synthesis of styryl‐capped isotactic polypropylenes

Bis‐styrenic molecules, 1,4‐divinylbenzene (DVB) and 1,2‐bis(4‐vinylphenyl)ethane (BVPE), were successfully combined with hydrogen (H₂) to form consecutive chain transfer complexes in propylene polymerization mediated by an isospecific metallocene catalyst (i.e., rac‐dimethylsilylbis(2‐methyl‐4‐phenylindenyl)zirconium dichloride, I ) activated with methylaluminoxane (MAO), rendering a catalytic access to styryl‐capped isotactic polypropylenes (i‐PP). The chain transfer reaction took place in a unique way where prior to the ultimate chain transfer DVB/H₂ or BVPE/H₂ caused a copolymerization‐like reaction leading to the formation of main chain benzene rings. A preemptive polymer chain reinsertion was deduced after the consecutive actions of DVB/H₂ or BVPE/H₂, which gave the styryl‐terminated polymer chain alongside a metal‐hydride active species. It was confirmed that the chain reinsertion occurred in a regio‐irregular 1,2‐fashion, which contrasted with a normal 2,1‐insertion of styrene monomer and ensured subsequent continuous propylene insertions, directing the polymerization to repeated DVB or BVPE incorporations inside polymer chain. Only as a competitive reaction, the insertion of propylene into metal‐hydride site broke the chain propagation resumption process while completed the chain transfer process by releasing the styryl‐terminated polymer chain. BVPE was found with much higher chain transfer efficiency than DVB, which was attributed to its non‐conjugated structure with much divided styrene moieties resulting in higher polymerization reactivity but lower chain reinsertion tendency. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3709–3713, 2010     

Carbon–Carbon Bond Formation in a Weak Ligand Field: Leveraging Open‐Shell First‐Row Transition‐Metal Catalysts

Unique features of earth‐abundant transition‐metal catalysts are reviewed in the context of catalytic carbon–carbon bond‐forming reactions. Aryl‐substituted bis(imino)pyridine iron and cobalt dihalide compounds, when activated with alkyl aluminum reagents, form highly active catalysts for the polymerization of ethylene. Open‐shell iron and cobalt alkyl complexes have been synthesized that serve as single‐component olefin polymerization catalysts. Reduced bis(imino)pyridine iron and cobalt dinitrogen compounds have also been discovered that promote the unique [2+2] cycloaddition of unactivated terminal alkenes. Studies of the electronic structure support open‐shell intermediates, a deviation from traditional strong‐field organometallic compounds that promote catalytic C−C bond formation.     

Coordinative Chain Transfer Polymerization of Butadiene with Functionalized Aluminum Reagents

Functionalized aluminum alkyls enable effective coordinative chain transfer polymerization with selective chain initiation by the functionalized alkyl. (ω‐Aminoalkyl)diisobutylaluminum reagents (12 examples studied) obtained by hydroalumination of α‐amino‐ω‐enes with diisobutylaluminum hydride promote the stereoselective catalytic chain growth of butadiene on aluminum in the presence of Nd(versatate)₃, Cp*₂Nd(allyl), or Cp*₂Gd(allyl) precatalysts and [PhNMe₂H⁺]/[B(C₆F₅)₄^?]. Carbazolyl‐ and indolylaluminum reagents result in efficient molecular weight control and chain initiation by the aminoalkyl rather than the isobutyl substituent bound to aluminum. As confirmed for (3‐(9H‐carbazol‐9‐yl)propyl)‐initiated polybutadiene (PBD), for example, by deuterium quenching studies, polymer chain transfer by β‐hydride transfer is negligible in comparison to back‐transfer to aluminum.     

Free radical polymerization with catalytic chain transfer: Using NMR to probe the strength of the cobalt–carbon bond in small molecule model reactions

This work examines cobalt–carbon bond formation between the cobalt (II) macrocycle, (tetrakis(p‐methoxyphenyl)porphyrinato)cobalt (II), (TAP)Co, and a variety of radicals derived from vinyl compounds to facilitate a better understanding of the various factors affecting the cobalt–carbon bond strength in catalytic chain transfer polymerization. The reaction of (TAP)Co with the following vinylic molecules was studied: methacrylonitrile, cyclohexene, methyl methacrylate, styrene, methyl acrylate, vinyl acetate, vinyl benzoate, methyl crotonate, cis‐2‐pentenenitrile, and ethyl α‐hydroxymethacrylate. Different concentrations of each vinylic compound were added to (TAP)Co and 2,2′‐azobis(isobutyronitrile) in CDCl₃ at 60 °C. The ratio of Co(III) to Co(II) and the nature of the radical bound to the cobalt macrocycle were determined via nuclear magnetic resonance measurements. Several factors are shown to affect the reaction of the radical and the cobalt (II) species (and hence the strength of the cobalt–carbon bond in the resulting compound). These factors are as follows: the number of pathways by which a radical may be derived from the vinyl compound; the variety of radicals that can be produced from the vinylic molecule; the stability of the radical(s) generated; and the relative propagation rate of the vinyl compound. A discussion on the relevance of this study to the behavior of different monomers in catalytic chain transfer reactions is included. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6171–6189, 2006     

Visible‐Light Photocatalytic Radical Alkenylation of α‐Carbonyl Alkyl Bromides and Benzyl Bromides

Through the use of [Ru(bpy)₃Cl₂] (bpy=2,2′‐bipyridine) and [Ir(ppy)₃] (ppy=phenylpyridine) as photocatalysts, we have achieved the first example of visible‐light photocatalytic radical alkenylation of various α‐carbonyl alkyl bromides and benzyl bromides to furnish α‐vinyl carbonyls and allylbenzene derivatives, prominent structural elements of many bioactive molecules. Specifically, this transformation is regiospecific and can tolerate primary, secondary, and even tertiary alkyl halides that bear β‐hydrides, which can be challenging with traditional palladium‐catalyzed approaches. The key initiation step of this transformation is visible‐light‐induced single‐electron reduction of C? Br bonds to generate alkyl radical species promoted by photocatalysts. The following carbon? carbon bond‐forming step involves a radical addition step rather than a metal‐mediated process, thereby avoiding the undesired β‐hydride elimination side reaction. Moreover, we propose that the Ru and Ir photocatalysts play a dual role in the catalytic system: they absorb energy from the visible light to facilitate the reaction process and act as a medium of electron transfer to activate the alkyl halides more effectively. Overall, this photoredox catalysis method opens new synthetic opportunities for the efficient alkenylation of alkyl halides that contain β‐hydrides under mild conditions.     

Effects of hydrogen in ethylene polymerization and oligomerization with magnesium chloride‐supported bis(imino)pyridyl iron catalysts

The effects of hydrogen in ethylene polymerization and oligomerization with different bis(imino)pyridyl iron(II) complexes immobilized on supports of type MgCl₂/AlEt_n(OEt)_3–n have been investigated. Hydrogen has a significant activating effect on polymerization catalysts containing relatively bulky bis(imino)pyridyl ligands, but this is not the case in ethylene oligomerization with a catalyst containing relatively little steric bulk in the ligand. It was found that the presence of hydrogen in the latter system led to decreased activity and an overall increase rather than a decrease in product molecular weight, indicating deactivation of active species producing low molecular weight polymer and oligomer. Decreased formation of vinyl‐terminated oligomers in the presence of hydrogen can therefore contribute to the activating effect of hydrogen in ethylene polymerization with immobilized iron catalysts, if it is assumed that hydrogen activation is related to chain transfer after a 2,1‐insertion of a vinyl‐terminated oligomer into the growing polymer chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4054–4061, 2007     

Mechanism of Silver(I)‐Catalyzed Enantioselective Synthesis of Axially Chiral Allenes Based on Propargylamines

The silver(I)‐catalyzed synthesis picture of axially chiral allenes based on propargylamines has been outlined using density functional theory (DFT) method for the first time. Our calculations find that, the coordination of silver(I) into triple bond of propargylamines at anti‐position of nitrogen shows a stronger activation on the triple bond than that at cis‐position, which is favorable for the subsequent hydrogen transfer. The NBO charge analysis for the hydrogen transfer affirms the experimental speculation that this step is a hydride transfer process. The energy barrier of the anti‐periplanar elimination of vinyl‐silver is 26.9 kJ·mol^?1 lower than that of the syn‐periplanar elimination, supporting that (?)‐allene is the main product of this reaction. In a word, the most possible route for this reaction is that the silver(I) coordinates into the triple bond of propargylamines at anti‐position of nitrogen, then the formed silver(I) complex undergoes a hydride transfer to give a vinyl‐silver, finally the vinyl‐silver goes through an anti‐periplanar elimination to give (?)‐allene. The hydride transfer with the energy barrier of 44.8 kJ·mol^?1 is the rate‐limiting step in whole catalytic process. This work provides insight into why this reaction has a very high enantioselectivity.     

Aluminum Hydride Catalyzed Hydroboration of Alkynes

An aluminum‐catalyzed hydroboration of alkynes using either the commercially available aluminum hydride DIBAL‐H or bench‐stable Et₃Al?DABCO as the catalyst and H‐Bpin as both the boron reagent and stoichiometric hydride source has been developed. Mechanistic studies revealed a unique mode of reactivity in which the reaction is proposed to proceed through hydroalumination and σ‐bond metathesis between the resultant alkenyl aluminum species and HBpin, which acts to drive turnover of the catalytic cycle.     

Effects of Alkyl Aluminum on SiO2‐Supported Silyl‐Chromate(Cr)/Imido‐Vanadium(V) Bimetallic Catalysts for Producing Bimodal Polyethylene

SiO₂‐supported Cr–V bimetallic catalyst can be used for producing bimodal polyethylene which can be applied for high‐performance pipe material. Alkyl aluminum are used to prereduce the bimetallic catalysts, and the effects of alkyl aluminum for the bimetallic catalyst are fully studied by catalyst characterization, polymerization kinetics, and the properties of polymer product by the comparison with the catalyst without prereduction. The result shows that the optimum polymerization activity is almost double after the catalyst is prereduced by triisobutylaluminum (TIBA), and the needed dosage of alkyl aluminum also is decreased significantly. The alkyl aluminum of the prereduced catalyst can also act as a chain transfer agent, significantly reducing the molecular weight of the polymer. The diethylaluminum chloride (DEAC) is mostly deactivating the Cr species during the ethylene polymerization. The synthesized catalysts, prereduced by TIBA, triethylaluminum (TEA), and DEAC, all exhibited good hydrogen response and comonomer interposition ability, which will be favorable for the further application of the bimetallic catalyst in the industrial field.

     

Selenium‐substituted carbonates as mediators for controlled radical polymerization

A series of selenium‐substituted carbonates, S,Se‐dibenzyl dithioselenocarbonate (DTSC), S,Se‐dibenzyl thiodiselenocarbonate (TDSC), and Se,Se‐dibenzyl triselenocarbonate (TSC), were synthesized and used as mediators in radical polymerization. The results indicate that these selenium‐substituted carbonates can control the polymerization of styrene (St) and methyl acrylate, as evidenced by the number‐average molecular weight that increased linearly with the monomer conversion, molecular weights that agreed well with the predicted values, and successful chain extensions. The treatment of the resultant polystyrene by hydrogen peroxide generated polymers with approximately half‐reduced molecular weights, and the absence of carbonate groups and vinyl double bond‐terminated chain ends. The polymerization with these selenium‐substituted carbonates was the same polymerization mechanism as their analogue, the widely used S,S‐dibenzyl trithiocarbonate. This work provided a flexible protocol to incorporate selenium into the polymer chain backbone. Specifically, the treatment of these polymers by oxidation produced “clickable” vinyl‐terminated chain ends, which provided possibilities for further functionalization, for example, via a thiol‐ene click reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2606–2613     

Synthesis of vinyl‐terminated isotactic poly(propylene)

Isotactic poly(propylene)s with 60–80% vinyl chain‐end selectivity were synthesized with metallocene catalysts. Some of these vinyl‐terminated poly(propylene)s are highly stereoregular (mmmm pentads up to 95%) and have high crystalline melting points in the range of 140–150°C. Chain‐end analysis using ¹³C NMR indicates the vinyl chain‐ends in the polymer are most likely formed through β‐methyl elimination in the chain termination step.     

Brønsted Acid Catalyzed Friedel–Crafts‐Type Coupling and Dedinitrogenation Reactions of Vinyldiazo Compounds

The direct Friedel–Crafts‐type coupling and dedinitrogenation reactions of vinyldiazo compounds with aromatic compounds using a metal‐free strategy are described. This Brønsted acid catalyzed method is efficient for the formation of α‐diazo β‐carbocations (vinyldiazonium ions), vinyl carbocations, and allylic or homoallylic carbocation species via vinyldiazo compounds. By choosing suitable nucleophilic reagents to selectively capture these intermediates, both trisubstituted α,β‐unsaturated esters, β‐indole‐substituted diazo esters, and dienes are obtained with good to high yields and selectivity. Experimental insights implicate a reaction mechanism involving the selective protonation of vinyldiazo compounds and the subsequent release of dinitrogen to form vinyl cations that undergo intramolecular 1,3‐ and 1,4‐ hydride transfer processes as well as fragmentation.     

Lewis Acid Mediated Vinyl‐Transfer Reaction of Alkynes to N‐Alkylimines by Using the N‐Alkyl Residue as a Sacrificial Hydrogen Donor

A variety of N‐alkyl‐α,α‐dichloroaldimines were vinylated by terminal acetylenes in the presence of Lewis acids such as In(OTf)₃ or BF₃ ? OEt₂ and hexafluoroisopropanol (HFIP) as an additive. The reaction proceeds at ambient temperature and leads to geometrically pure allylic β,β‐dichloroamines. This approach is complementary to previously reported transition‐metal‐catalyzed vinyl‐transfer methods, which are not applicable to aliphatic imines and are restricted to imines that contain an electron‐withdrawing nitrogen substituent. In the present approach, terminal alkynes were used as a source of the vinyl residue, and the N‐alkyl moiety of the imine acts as a sacrificial hydrogen donor. The additional advantage of this methodology is the fact that no external toxic or hazardous reducing agents or molecular hydrogen has to be used. This new methodology nicely combines a C(sp²)? C(sp) bond formation, hydride transfer, and an unusual cleavage of an unactivated C? N bond, thereby giving rise to functionalized primary allylic amines. A detailed experimental study supported by DFT calculations of the mechanism has been done.     

Exploiting catalytic chain transfer polymerization for the synthesis of carboxylated latexes via sulfur‐free RAFT

We present a systematic study of incorporating carboxyl groups into latex particles to enhance colloidal stability and the physical properties of the latex. Statistical copolymers of methacrylic acid and methyl methacrylate) were synthesized via catalytic chain transfer polymerization (CCTP) in emulsion. The vinyl‐terminated oligomers were in turn successfully utilized as chain transfer agents for the formation of diblock and pseudo triblock copolymers via sulfur‐free reversible addition–fragmentation chain transfer polymerization (SF‐RAFT). These copolymers were characterized using ¹H NMR, size exclusion chromatography (SEC), dynamic light scattering (DLS), dynamic mechanical analysis (DMA), contact angle measurements and matrix‐assisted laser desorption/ionization time of flight mass spectroscopy (MALDI‐TOF‐MS) techniques. © 2019 The Authors. Journal of Polymer Science Part A: Polymer Chemistry published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, E1–E9     

From NMP to RAFT and Thiol‐Ene Chemistry by In Situ Functionalization of Nitroxide Chain Ends

A straightforward, novel strategy based on the in situ functionalization of polymers prepared by nitroxide‐mediated polymerization (NMP), for the use as an extension toward block copolymers and post‐polymerization modifications, has been investigated. The nitroxide end group is exchanged for a thiocarbonylthio end group by a rapid transfer reaction with bis(thiobenzoyl) disulfide to generate in situ reversible addition–fragmentation chain transfer (RAFT) macroinitiators. Moreover, not only have these macroinitiators been used in chain extension and block copolymerization experiments by the RAFT process but also a thiol‐terminated polymer is synthesized by aminolysis of the RAFT end group and subsequently reacted with dodecyl vinyl ether by thiol‐ene chemistry.     

Solid‐State NMR and DFT Combined for the Surface Study of Functionalized Silicon Nanoparticles

Silicon nanoparticles (NPs) serve a wide range of optical, electronic, and biological applications. Chemical grafting of various molecules to Si NPs can help to passivate their reactive surfaces, “fine‐tune” their properties, or even give them further interesting features. In this work, ¹H, ¹³C, and ²⁹Si solid‐state NMR spectroscopy has been combined with density functional theory calculations to study the surface chemistry of hydride‐terminated and alkyl‐functionalized Si NPs. This combination of techniques yields assignments for the observed chemical shifts, including the contributions resulting from different surface planes, and highlights the presence of physisorbed water. Resonances from near‐surface ¹³C nuclei were shown to be substantially broadened due to surface disorder and it is demonstrated that in an ambient environment hydride‐terminated Si NPs undergo fast back‐bond oxidation, whereas long‐chain alkyl‐functionalized Si NPs undergo slow oxidation. Furthermore, the combination of NMR spectroscopy and DFT calculations showed that the employed hydrosilylation reaction involves anti‐Markovnikov addition of the 1‐alkene to the surface of the Si NPs.     

Versatile Homoallylic Boronates by Chemo‐, SN2′‐, Diastereo‐ and Enantioselective Catalytic Sequence of Cu−H Addition to Vinyl‐B(pin)/Allylic Substitution

A highly chemo‐, diastereo‐ and enantioselective catalytic method that efficiently combines a silyl hydride, vinyl‐B(pin) (pin=pinacolato) and (E)‐1,2‐disubstituted allylic phosphates is introduced. Reactions, best promoted by a Cu‐based complex with a chiral sulfonate‐containing N‐heterocyclic carbene, are broadly applicable. Aryl‐, heteroaryl‐, alkenyl‐, alkynyl‐ and alkyl‐substituted allylic phosphates may thus be converted to the corresponding homoallylic boronates and then alcohols (after C−B bond oxidation) in 46–91 % yield and in up to >98 % S_N2′:S_N2 ratio, 96:4 diastereomeric ratio and 98:2 enantiomeric ratio. The reasons why an NHC−Cu catalyst is uniquely effective (vs. the corresponding phosphine systems) and the basis for different trends in stereoselectivity are provided with the aid of DFT calculations.     

Chain Transfer to Toluene in Styrene Coordination Polymerization

The chain‐transfer reaction is rather important in coordination polymerization regarding catalytic efficiency, adjustment of molecular weight, and control of chain structure. To date, chain transfer to H₂ and Al, Mg, and Zn alkyl compounds and β‐H elimination are the commonly encountered modes. Now a novel chain transfer to toluene is reported. By introducing fluorine atoms into the β‐diketimine ligands, an inert catalytic system for styrene (St) coordination polymerization was transferred into the highly active one. The activity increased with an increase in the number of fluorines in the ligands. Surprisingly, the molecular weights of resultant polystyrenes are very low (M_n=2000–6600 Da) despite of St loadings, corresponding up to 121 chains per active species. The mechanisms were investigated by DFT simulation, MALDI‐TOF MS, isotope tracing experiment and 2D NMR spectrum analyses, which revealed that the fluorine activated the polymerization and directed chain transfer to toluene.     

Computational Insight into Nickel‐Catalyzed Carbon–Carbon versus Carbon–Boron Coupling Reactions of Primary,Secondary, and Tertiary Alkyl Bromides

The nickel‐catalyzed alkyl–alkyl cross‐coupling (C?C bond formation) and borylation (C?B bond formation) of unactivated alkyl halides reported in the literature show completely opposite reactivity orders in the reactions of primary, secondary, and tertiary alkyl bromides. The proposed Ni^I/Ni^III catalytic cycles for these two types of bond‐formation reactions were studied computationally by means of DFT calculations at the B3LYP level. These calculations indicate that the rate‐determining step for alkyl–alkyl cross‐coupling is the reductive elimination step, whereas for borylation the rate is determined mainly by the atom‐transfer step. In borylation reactions, the boryl ligand involved has an empty p orbital, which strongly facilitates the reductive elimination step. The inability of unactivated tertiary alkyl halides to undergo alkyl–alkyl cross‐coupling is mainly due to the moderately high reductive elimination barrier.