A Novel Molecularly Imprinted Photoelectrochemical Sensor Based on g‐C3N4‐AuNPs for the Highly Sensitive and Selective Detection of Triclosan

A novel molecularly imprinted polymer (MIP) photoelectrochemical sensor was fabricated for the highly sensitive and selective detection of triclosan. The MIP photoelectrochemical sensor was fabricated using graphite‐like carbon nitride (g‐C₃N₄) and gold nanoparticles (AuNPs) as photoelectric materials. The MIP/g‐C₃N₄‐AuNPs sensor used photocurrent as the detection signal and was triggered by ultraviolet light (UV‐Light 365 nm). g‐C₃N₄‐AuNPs was immobilized on indium tin oxide electrodes to produce the photoelectrochemically responsive electrode of the MIP/g‐C₃N₄‐AuNPs sensor. A MIP layer of poly‐o‐phenylenediamine was electropolymerized on the g‐C₃N₄‐AuNPs‐modified electrode to act as the recognition element of the MIP/g‐C₃N₄‐AuNPs sensor and to enable the selective adsorption of triclosan to the sensor through specific binding. Under optimal experimental conditions, the designed MIP/g‐C₃N₄‐AuNPs sensor presented high sensitivity for triclosan with a linear range of 2×10⁻¹² to 8×10⁻¹⁰ M and a limit of detection of 6.01×10⁻¹³ M. Moreover, the MIP/g‐C₃N₄‐AuNPs sensor showed excellent selectivity. The sensor had been successfully applied in the analysis of toothpaste samples.     

A novel C2 symmetric chiral stationary phase with N‐[(4‐Methylphenyl)sulfonyl]‐l‐leucine as chiral side chains

In this study, a series of chiral stationary phases based on N‐[(4‐methylphenyl)sulfonyl]‐l ‐leucine amide, whose enantiorecognition property has never been studied, were synthesized. Their enantioseparation abilities were chromatographically evaluated by 67 enantiomers. The chiral stationary phase derived from N‐[(4‐methylphenyl)sulfonyl]‐l ‐leucine showed much better enantioselectivities than that based on N‐(4‐methylbenzoyl)‐l ‐leucine amide. The construction of C₂ symmetric chiral structure greatly improved the enantiorecognition performance of the stationary phase. The C₂ symmetric chiral stationary phase exhibited superior enantioresolutions to other chiral stationary phases for most of the chiral analytes, especially for the chiral analytes with C₂ symmetric structures. By comparing the enantioseparations of the enantiomers with similar structures, the importance of hydrogen bond interaction, π–π interaction, and steric hindrance on enantiorecognition was elucidated. The enantiorecognition mechanism of trans‐N,N′‐(1,2‐diphenyl‐1,2‐ethanediyl)bis‐acetamide, which had an excellent separation factor on the C₂ symmetric chiral stationary phase, was investigated by ¹H‐NMR spectroscopy and 2D ¹H‐¹H nuclear overhauser enhancement spectroscopy.     

Metal/Graphitic Carbon Nitride Composites: Synthesis,Structures, and Applications

Graphitic carbon nitride (g‐C₃N₄) has been widely used in fields related to energy and materials science. However, nanostructured g‐C₃N₄ photocatalysts synthesized by traditional thermal polycondensation methods have the disadvantage of small specific surface areas and wide band gaps; these limit the catalytic activity and application range of g‐C₃N₄. Based on the unique nanostructure of g‐C₃N₄, it is a feasible method to modify g‐C₃N₄ with metals to design novel metal–semiconductor composites. Metals alter the photochemical properties of g‐C₃N₄, in particular, narrow the band gap and expand photoabsorption into the visible range, which improves the photocatalytic performance. This review covers recent progress in metal/g‐C₃N₄ nanocomposites for photocatalysts, organic systems, biosensors, and so on. The aim is to summarize the synthetic methods, nanostructures, and applications of metal/g‐C₃N₄ nanocomposite materials, as well as discuss future research directions in these areas.     

Facile one‐step synthesis of broken case‐like carbon‐doped g‐C3N4 for photocatalytic degradation of benzene

Herein, a novel broken case‐like carbon‐doped g‐C₃N₄ photocatalyst was obtained via a facile one‐pot pyrolysis and cost‐effective method using glyoxal‐modified melamine as a precursor. The obtained carbon/g‐C₃N₄ photocatalyst showed remarkable enhanced photocatalytic activity in the degradation of gaseous benzene compared with that of pristine g‐C₃N₄ under visible light. The pseudo‐first‐order rate constant for gaseous benzene degradation on carbon/g‐C₃N₄ was 0.186 hr^?1, 5.81 times as large as that of pristine g‐C₃N₄. Furthermore, a possible photocatalytic mechanism for the improved photocatalytic performance over carbon/g‐C₃N₄ nanocomposites was proposed.     

Electrochemical Biosensor for Organophosphate Pesticides and Huperzine‐A Detection Based on Pd Wormlike Nanochains/Graphitic Carbon Nitride Nanocomposites and Acetylcholinesterase

A new electrochemical biosensor was developed for organophosphorus pesticides (OPs) and huperzine‐A (hupA) detection based on Pd wormlike nanochains/graphitic carbon nitride (Pd WLNCs/g‐C₃N₄) nanocomposites and acetylcholinesterase (AChE). The morphologies and components of the nanocomposites were analyzed by transmission electron microscopy (TEM) and X‐ray photoelectron spectroscopy (XPS). The Pd WLNCs/g‐C₃N₄ nanocomposites could effectively immobilize enzymes and promote the signal amplification. Under the optimum condition, the proposed biosensor displayed well performance. The linear response ranges for the determination of OPs and hupA were 1.00 nM to 14.96 µM and 3.89 nM to 20.80 µM, respectively. The corresponding detection limits were 0.33 nM and 1.30 nM (S/N=3). Meanwhile, the biosensor owned good reproducibility and stability, and could also be applied to analyze practical samples, which would be a new hopeful method for pesticide analysis.     

Enantioselective Recognition of Dopa Enantiomers in the Presence of Ascorbic Acid or Tyrosine

A simple sensor was obtained through N‐isobutyryl‐L ‐(D )‐cysteine enantiomers self‐assembled monolayer. It was demonstrated that the N‐isobutyryl‐cysteine modified gold electrodes can enantioselectively recognize 3,4‐dihydroxyphenylalanine (dopa) enantiomers. The electrocatalytic behaviors of enantiomers were analyzed with cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Selectivity of the chiral surface was estimated by investigating two mixture enantiomers (dopa‐ascorbic acid and dopa‐tyrosine), it certified that the sensor was only satisfactorily used to specific recognize dopa enantiomers. The possible mechanism for the enantioselective recognition was discussed.     

Electrochemiluminescence biosensor for carcinoembryonic antigen detection based on Au-Ag/g-C3N4 nanocomposites

Herein, an electrochemiluminescence (ECL) aptasensor for carcinoembryonic antigen (CEA) detection was developed based on Au-Ag/g-C₃N₄ nanocomposites (NCs), which were synthesized by decorating graphitic carbon nitride (g-C₃N₄) nanosheets with alloy-structured Au-Ag bimetallic nanoparticles (NPs) via one-step in situ chemical reduction. As ECL sensing platform, Au-Ag/g-C₃N₄ NCs could significantly improve the ECL intensity of luminol due to the good conductivity of Au-Ag NPs, electrocatalytic activity for oxygen evolution reaction (OER) and the ability to adsorb luminol via π stacking interaction. In addition, it could load the thiol terminated aptamers of CEA via Au-S or Ag-S bonds. In the presence of CEA, the ECL response of the proposed biosensor decreased significantly due to the fact that the assembled protein layers hindered the electron transfer and the diffusion of ECL reactants toward the electrode surface. The proposed ECL sensor exhibited a good linear relationship with CEA in the range of 1.0–1.0 × 10^?6 ng/mL with a detection limit of 8.9 × 10^?7 ng/mL. The satisfactory results were obtained in the detection of CEA in human serum samples.     

Facilitating a high‐performance photocatalyst for Suzuki reaction: Palladium nanoparticles immobilized on reduced graphene oxide‐doped graphitic carbon nitride

We prepared a non‐covalently coupled hybrid of reduced graphene oxide (rGO)‐doped graphitic carbon nitride (g‐C₃N₄) by freezing‐assisted assembly and calcination. Fourier transform infrared, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy confirmed that rGO was incorporated into the bulk g‐C₃N₄, which was an ideal support for loading Pd nanoparticles. The Pd nanoparticles with an average size of 4.57 nm were uniformly dispersed on the rGO‐doped g‐C₃N₄ surface. The layered structure provided large contact area of g‐C₃N₄ with rGO, further accelerating the electron transfer rate and inhibiting electron–hole recombination. Consequently, compared with Pd/rGO/g‐C₃N₄ and Pd/g‐C₃N₄, the Pd/rGO‐doped g‐C₃N₄ showed a prominent catalytic activity for visible‐light‐driven photocatalytic Suzuki–Miyaura coupling at ambient temperature. The Pd/rGO‐doped g‐C₃N₄ exhibited very high stability after six consecutive cycles with minimal loss of catalytic activity.     

Weak C—H...O and C—H...π hydrogen bonds and π–π stacking interactions in a series of four N′‐[(E)‐(aryl)methylidene]‐N‐methyl‐2‐oxo‐1,3‐oxazolidine‐4‐carbohydrazides

Oxazolidin‐2‐ones are widely used as protective groups for 1,2‐amino alcohols and chiral derivatives are employed as chiral auxiliaries. The crystal structures of four differently substituted oxazolidinecarbohydrazides, namely N′‐[(E)‐benzylidene]‐N‐methyl‐2‐oxo‐1,3‐oxazolidine‐4‐carbohydrazide, C₁₂H₁₂N₃O₃, (I), N′‐[(E)‐2‐chlorobenzylidene]‐N‐methyl‐2‐oxo‐1,3‐oxazolidine‐4‐carbohydrazide, C₁₂H₁₂ClN₃O₃, (II), (4S)‐N′‐[(E)‐4‐chlorobenzylidene]‐N‐methyl‐2‐oxo‐1,3‐oxazolidine‐4‐carbohydrazide, C₁₂H₁₂ClN₃O₃, (III), and (4S)‐N′‐[(E)‐2,6‐dichlorobenzylidene]‐N,3‐dimethyl‐2‐oxo‐1,3‐oxazolidine‐4‐carbohydrazide, C₁₃H₁₃Cl₂N₃O₃, (IV), show that an unexpected mild‐condition racemization from the chiral starting materials has occurred in (I) and (II). In the extended structures, the centrosymmetric phases, which each crystallize with two molecules (A and B) in the asymmetric unit, form A+B dimers linked by pairs of N—H...O hydrogen bonds, albeit with different O‐atom acceptors. One dimer is composed of one molecule with an S configuration for its stereogenic centre and the other with an R configuration, and possesses approximate local inversion symmetry. The other dimer consists of either R,R or S,S pairs and possesses approximate local twofold symmetry. In the chiral structure, N—H...O hydrogen bonds link the molecules into C(5) chains, with adjacent molecules related by a 2₁ screw axis. A wide variety of weak interactions, including C—H...O, C—H...Cl, C—H...π and π–π stacking interactions, occur in these structures, but there is little conformity between them.     

Ultrathin g‐C3N4 Nanosheets Coupled with AgIO3 as Highly Efficient Heterostructured Photocatalysts for Enhanced Visible‐Light Photocatalytic Activity

The photocatalytic activity of graphite‐like carbon nitride (g‐C₃N₄) could be enhanced by heterojunction strategies through increasing the charge‐separation efficiency. As a surface‐based process, the heterogeneous photocatalytic process would become more efficient if a larger contact region existed in the heterojunction interface. In this work, ultrathin g‐C₃N₄ nanosheets (g‐C₃N₄‐NS) with much larger specific surface areas are employed instead of bulk g‐C₃N₄ (g‐C₃N₄‐B) to prepare AgIO₃/g‐C₃N₄‐NS nanocomposite photocatalysts. By taking advantage of this feature, the as‐prepared composites exhibit remarkable performances for photocatalytic wastewater treatment under visible‐light irradiation. Notably, the optimum photocatalytic activity of AgIO₃/g‐C₃N₄‐NS composites is almost 80.59 and 55.09 times higher than that of pure g‐C₃N₄‐B towards the degradation of rhodamine B and methyl orange pollutants, respectively. Finally, the stability and possible photocatalytic mechanism of the AgIO₃/g‐C₃N₄‐NS system are also investigated.     

Synthesis and crystal structures of two structurally related kryptoracemates

Kryptoracemates are racemic compounds (pairs of enantiomers) that crystallize in Sohnke space groups (space groups that contain neither inversion centres nor mirror or glide planes nor rotoinversion axes). Thus, the two symmetry‐independent molecules cannot be transformed into one another by any symmetry element present in the crystal structure. Usually, the conformation of the two enantiomers is rather similar if not identical. Sometimes, the two enantiomers are related by a pseudosymmetry element, which is often a pseudocentre of inversion, because inversion symmetry is thought to be favourable for crystal packing. We obtained crystals of two kryptoracemates of two very similar compounds differing in just one residue, namely rac‐N‐[(1S ,2R ,3S )‐2‐methyl‐3‐(5‐methylfuran‐2‐yl)‐1‐phenyl‐3‐(pivalamido)propyl]benzamide, C₂₇H₃₂N₂O₃, (I), and rac‐N‐[(1S ,2S ,3R )‐2‐methyl‐3‐(5‐methylfuran‐2‐yl)‐1‐phenyl‐3‐(propionamido)propyl]benzamide dichloromethane hemisolvate, C₂₅H₂₈N₂O₃·0.5CH₂Cl₂, (II). The crystals of both compounds contain both enantiomers of these chiral molecules. However, since the space groups [P 2₁2₁2₁ for (I) and P 1 for (II)] contain neither inversion centres nor mirror or glide planes nor rotoinversion axes, there are both enantiomers in the asymmetric unit, which is a rather uncommon phenomenon. In addition, it is remarkable that (II) contains two pairs of enantiomers in the asymmetric unit. In the crystal, molecules are connected by intermolecular N—H…O hydrogen bonds to form chains or layered structures.     

基于杯[4]芳烃和S-联萘酚的荧光传感器的合成及其对N-Boc保护谷氨酸阴离子的对应选择性识别性能研究

合成了一种基于杯[4]芳烃和S-联萘酚单元的新型手性大环受体4,并用荧光光谱和核磁氢谱研究了该受体与阴离子的键合性质。非线性曲线拟合结果表明受体4与N-Boc保护L-和D-谷氨酸阴离子都能通过多重氢键形成1:1的络合物,而且对N-Boc保护谷氨酸阴离子对映体显示了较好的对应选择性识别性能（Kass(L) / Kass(D) = 4.65）。不同的荧光响应表明受体4可以用作N-Boc保护谷氨酸阴离子的对应选择性的荧光化学传感器。     

Label‐free Electrochemiluminescent Enantioselective Sensor for Distinguishing between Chiral Metallosupramolecular Complexes

Chiral molecular recognition of DNA is important for rational drug design and for developing structural probes of DNA conformation. Developing a convenient and inexpensive assay for sensitive and selective identification of DNA‐specific binding compounds with rapid, easy manipulation is in ever‐increasing demand. Here, we present a “turn‐on” and label‐free electrochemiluminescent (ECL) biosensor for distinguishing chiral metallosupramolecular complexes based on DNA three‐way junction formation selectively induced by the analyte. The fabricated ECL sensor shows excellent performance in the chiral discrimination of two enantiomers with an enantioselective recognition ratio of up to 4.4. More importantly, as a “turn‐on” detection system, the ECL chiral sensor does not suffer from false positives and limited signal range of “signal‐off” systems. Therefore, this concept may provide a new insight into the design of efficient sensors for distinguishing chiral molecules and for investigating the interactions between DNA and small molecules.     

Palladium Nanoparticles Supported on Titanium‐Doped Graphitic Carbon Nitride for Formic Acid Dehydrogenation

Pd nanoparticles (NPs) supported on Ti‐doped graphitic carbon nitride (g‐C₃N₄) were synthesized by a deposition–precipitation route and a subsequent reduction with NaBH₄. The features of the NPs were studied by XRD, TEM, FTIR, XPS, EXAFS and N₂‐physisorption measurements. It was found that the NPs had an average size of 2.9 nm and presented a high dispersion on the surface of Ti‐doped g‐C₃N₄. Compared to Pd loaded on pristine g‐C₃N₄, the Pd NPs supported on Ti‐doped g‐C₃N₄ exhibited a high catalytic activity in formic acid dehydrogenation in water at room temperature. The enhanced activity could be attributed to the small Pd NPs size, as well as the strong interaction between Pd NPs and Ti‐doped g‐C₃N₄.     

A Rapid Microwave‐Assisted Thermolysis Route to Highly Crystalline Carbon Nitrides for Efficient Hydrogen Generation

Highly crystalline graphitic carbon nitride (g‐C₃N₄) with decreased structural imperfections benefits from the suppression of electron–hole recombination, which enhances its hydrogen generation activity. However, producing such g‐C₃N₄ materials by conventional heating in an electric furnace has proven challenging. Herein, we report on the synthesis of high‐quality g‐C₃N₄ with reduced structural defects by judiciously combining the implementation of melamine–cyanuric acid (MCA) supramolecular aggregates and microwave‐assisted thermolysis. The g‐C₃N₄ material produced after optimizing the microwave reaction time can effectively generate H₂ under visible‐light irradiation. The highest H₂ evolution rate achieved was 40.5 μmol h⁻¹, which is two times higher than that of a g‐C₃N₄ sample prepared by thermal polycondensation of the same supramolecular aggregates in an electric furnace. The microwave‐assisted thermolysis strategy is simple, rapid, and robust, thereby providing a promising route for the synthesis of high‐efficiency g‐C₃N₄ photocatalysts.     

A Sensor for Serotonin and Dopamine Detection in Cancer Cells Line Based on the Conducting Polymer−Pd Complex Composite

An electrochemical sensor based on the conducting polymer composite with a palladium complex (Pd(C₂H₄N₂S₂)₂) was developed for the detection of serotonin and dopamine simultaneously in the breast cancer cell and human plasma samples. The proposed sensor was fabricated using the Pd(C₂H₄N₂S₂)₂ complex‐anchored poly2,2 : 5,2‐terthiophene‐3‐(p‐benzoic acid) (pTBA) layer on the AuNPs decorated reduced graphene oxide (AuNPs@rGO) substrate, which revealed the enhanced anodic current of the target species. The sensor probe was characterized by electrochemical and surface analysis methods. The experimental parameters affecting the sensor performance were optimized, in terms of AuNPs@rGO concentration, the number of electropolymerization cycle for pTBA, immobilization time of Pd(C₂H₄N₂S₂)₂, and pH. The dynamic ranges for serotonin and dopamine were obtained from 0.02 to 200 μM, and from 0.1 to 200 μM with the detection limit of 2.5, and 24.0 nM, respectively. The reliability of proposed sensor was evaluated using cancer cell lines for the clinical applications.     

A Novel Solid‐state Electrochemiluminescent Enantioselective Sensor for Ascorbic Acid and Isoascorbic Acid

A novel, stable, solid‐state and stereoselective electrochemiluminescence (ECL) sensor has been designed to enantioselectively discriminate ascorbic acid (AA) and isoascorbic acid (IAA) by immobilizing Ru(bpy)₃²⁺ (Ru), thiolated β‐cyclodextrin (β‐CD‐SH) and gold/platinum hybrid nanoparticles supported on multiwalled carbon nanotube/silica coaxial nanocables (GP‐CSCN) on glassy carbon electrode. All chemical compounds could be immobilized on the surface of electrode stably through nafion film, and high stereoselectivity could be introduced to the sensor via the synergistic effects of the β‐CD‐SH and GP‐CSCN nanomaterials. When the developed sensor interacted with AA and IAA, obvious difference of ECL intensities was observed, and a larger intensity was obtained from AA, which indicated that this strategy could be employed to enantioselectively recognize AA and IAA. As a result, ECL technique might act as a promising method for recognition of chiral compounds.     

Enantiomorphs of a carbene–ruthenium(II)–porphyrin complex with four `chiral pillars'

The chiral metalloporphyrin (dibenzoylmethylene‐κC)(ethanol‐κO){5,10,15,20‐tetrakis[(1S,4R,5R,8S)‐1,2,3,4,5,6,7,8‐octahydro‐1,4:5,8‐dimethanoanthracen‐9‐yl]porphyrinato‐κ⁴N}ruthenium(II)–ethanol–dichloromethane (1/2/2), [Ru(C₈₄H₇₆N₄)(C₁₅H₁₀O₂)(C₂H₆O)]·2C₂H₆O·2CH₂Cl₂, and its enantiomorph were prepared from enantiomerically pure porphyrins. The enantiomers are potential versatile catalysts for asymmetric cyclopropanation, aziridination or epoxidation. In each compound, the rather large dibenzoylcarbene group is squeezed between four columnar 1,2,3,4,5,6,7,8‐octahydro‐1,4:5,8‐dimethanoanthracen‐9‐yl groups at the meso positions resulting in a doming deformation of the porphyrin core. The dibenzoylcarbene group has an anti conformation. The benzoyl O atoms make short van der Waals contacts (< 2.6 Å) with the methine groups of the chiral columnar substituents at the 10 and 20 positions of the porphyrin rings. A hydrogen‐bonded supramolecular chain is formed parallel to the b axis by interactions between the benzoyl O atom and the hydroxy groups of the coordinated and uncoordinated ethanol molecules.     

Synthesis and chiral recognition properties of poly(N‐propargylamide) gels derived from ornithine and lysine

Copolymerization of ornithine‐ and lysine‐derived N‐propargylamides, N‐α‐tert‐butoxycarbonyl‐N‐δ‐fluorenylmethoxycarbonyl‐L ‐ornithine N′‐propargylamide ( 1 ), N‐α‐tert‐butoxycarbonyl‐N‐ε‐fluorenylmethoxycarbonyl‐L ‐lysine N′‐propargylamide ( 2 ), N‐α‐fluorenylmethoxycarbonyl‐N‐δ‐tert‐butoxycarbonyl‐L ‐ornithine N′‐propargylamide ( 3 ), and N‐α‐fluorenylmethoxycarbonyl‐N‐ε‐tert‐butoxycarbonyl‐L ‐lysine N′‐propargylamide (4) with dipropargyl adipate was carried out using (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃] as a catalyst in THF to obtain polymer gels in 80–93% yields. The gels adsorbed N‐benzyloxycarbonyl L ‐alanine, N‐benzyloxycarbonyl L ‐alanine methyl ester, and (S)‐(+)‐1‐phenyl‐1,2‐ethanediol preferably than the corresponding optical isomers. The order of chiral discrimination was poly( 1 ) > poly( 4 ) > poly( 2 ), poly( 3 ) gels. The fluorenylmethoxycarbonyl groups of the gels could be partly removed by piperidine treatment, leading to increase of adsorptivity but decrease of chiral recognition ability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4175–4182, 2008     

Preparation and Pb (II) adsorption in aqueous of 2D/2D g‐C3N4/MnO2 composite

A novel g‐C₃N₄/MnO₂ composite was prepared by in situ deposition of MnO₂ on graphitic carbon nitride (g‐C₃N₄) nanosheets, and its adsorption properties were evaluated for removal of Pb (II) in aqueous. Fourier transform‐infrared, spectrometer scanning electron microscopy and transmission electron microscopy characterization showed the g‐C₃N₄/MnO₂ composite had a two‐dimensional/two‐dimensional (2D/2D) structure with ample active sites. The Brunauer–Emmett–Teller specific surface area of g‐C₃N₄/MnO₂ composites (234.9 m²/g) was 13.5 times larger than that of g‐C₃N₄ (17.37 m²/g), providing better conditions for adsorption. The adsorption kinetic data were better fitted with the pseudo‐second‐order model. The Langmuir model was more suitable for describing the experimental equilibrium data of g‐C₃N₄/MnO₂, and the maximum adsorption capacity was 204.1 mg/g for Pb (II). The adsorption of g‐C₃N₄/MnO₂ composite for Pb (II) was an endothermic and spontaneous process, and reached adsorption equilibrium rapidly within initial 150 min. This composite was an excellent adsorbent because of its higher adsorption capacity and facile preparation progress.