The excited states of bipyridyl and phenanthroline complexes of Fe(III), Ru(II) and Ru(III): A molecular orbital study

The semiempirical zero-differential-overlap molecular orbital model which was shown in earlier papers in this series to give a good account of the charge transfer and -* spectra of Fe(II) complexes with conjugated ligands such as 2,2-bipyridyl and 1,10-phenanthroline is extended to complexes having openshell ground states, such as those of Fe(III), and to complexes of Ru(II) and Ru(III). The results are used to assign the observed charge transfer and intra-ligand absorption bands to specific orbital transitions. Observed and calculated intensities are in good agreement: reasons are advanced for the much lower intensity of the charge transfer bands in Ru(III) compared to Ru(II) complexes.     

铜(II)蛋氨酸席夫碱配合物EPR波谱研究

Two kinds of new copper(Ⅱ) complexes with methionine Schiff bases have been synthesized respectively. EPR spectra of these complexes in polycrystalline powder and in three organic solvents were investigated at different temperatures. The bonding characterization of these complexes were discussed .The result shows that the in -place bond and the in -place bond in these complexes all play an important role.     

Tetradentate asymmetric Schiff bases and their Ni(II) and Fe(III) complexes

Three asymmetric Schiff-base tetradentate diimines H₂L¹, H₂L², and H₂L³ [(2-OH)C₆H₄N=CHC₆H₄2-N=CHC₆H₃(2-OH)(5-X), X?=?H, CH₃, Cl respectively] have been synthesized by a two step process. The reaction of 2-hydroxy aniline with 2-nitro-benzaldehyde in EtOH gave the starting Schiff base, 2-hydroxy-N-(2-nitrobenzylidene)aniline (SB-NO₂), which was reduced into the amino derivative (SB-NH₂) in solution. Reacting SB-NH₂ with 2-hydroxybenzaldehyde, 2-hydroxy-5-methylbenzaldehyde and 2-hydroxy-5-chlorobenzaldehyde gave the three new ligands H₂L¹, H₂L², and H₂L³ respectively. Their dimeric, binuclear metal complexes with Ni(II) and Fe(III) have also been synthesized. The ligands and their complexes were characterized by elemental analyses, LC–MS, IR, electronic, ¹H and ¹³C-NMR spectra, TGA, conductivity and magnetic measurements. All of the spectroscopic, analytical and other data indicate octahedral geometry M₂L₂(H₂O)X₂ (M: Ni,Co;X: Cl or H₂O), except for NiL² which is monomeric. Antimicrobial activities of the ligands and the complexes were evaluated against five bacteria. While the ligands and the Ni complexes are inactive towards Pseudomonas aeruginosa and Staphylococcus aureus, Fe complexes are active; only Fe complexes are inactive against Escherichia coli. All of the compounds have antimicrobial activities against Bacillus subtilis, and Yersinia enterecolitica.     

Bioactive Co(II), Ni(II), and Cu(II) Complexes Containing a Tridentate Sulfathiazole-Based (ONN) Schiff Base

New Co(II), Ni(II), and Cu(II) complexes were synthesized with the Schiff base ligand obtained by the condensation of sulfathiazole with salicylaldehyde. Their characterization was performed by elemental analysis, molar conductance, spectroscopic techniques (IR, diffuse reflectance and UV–Vis–NIR), magnetic moments, thermal analysis, and calorimetry (thermogravimetry/derivative thermogravimetry/differential scanning calorimetry), while their morphological and crystal systems were explained on the basis of powder X-ray diffraction results. The IR data indicated that the Schiff base ligand is tridentate coordinated to the metallic ion with two N atoms from azomethine group and thiazole ring and one O atom from phenolic group. The composition of the complexes was found to be of the [ML₂]∙nH₂O (M = Co, n = 1.5 (1); M = Ni, n = 1 (2); M = Cu, n = 4.5 (3)) type, having an octahedral geometry for the Co(II) and Ni(II) complexes and a tetragonally distorted octahedral geometry for the Cu(II) complex. The presence of lattice water molecules was confirmed by thermal analysis. XRD analysis evidenced the polycrystalline nature of the powders, with a monoclinic structure. The unit cell volume of the complexes was found to increase in the order of (2) < (1) < (3). SEM evidenced hard agglomerates with micrometric-range sizes for all the investigated samples (ligand and complexes). EDS analysis showed that the N:S and N:M atomic ratios were close to the theoretical ones (1.5 and 6.0, respectively). The geometric and electronic structures of the Schiff base ligand 4-((2-hydroxybenzylidene) amino)-N-(thiazol-2-yl) benzenesulfonamide (HL) was computationally investigated by the density functional theory (DFT) method. The predictive molecular properties of the chemical reactivity of the HL and Cu(II) complex were determined by a DFT calculation. The Schiff base and its metal complexes were tested against some bacterial strains (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Bacillus subtilis). The results indicated that the antibacterial activity of all metal complexes is better than that of the Schiff base.     

Effect of the pH on the complexation of Cu(II), Ni(II) and Fe(III) Ions by a vine leaf litter extract by fluorescence quenching

An extract of dead vine leaves (vitis viniferal) (VLE) was obtained by the extraction procedure for fulvic acids and its interaction (at a concentration of 25mg/L in 0.1 M KNO₃) with the Cu(II), Ni(II) and Fe(III) ions was studied in the pH range between 3 and 6. This interaction was monitored by synchronous molecular fluorescence, since bands due to the fluorescent ligands undergo quenching upon complex formation. After the chemometric isolation of the quenching profiles from the raw spectra by a self-modeling mixture analysis, SIMPLISMA, they were analyzed by two methods: (i) graphical procedures based on the Stern-Volmer model; and (ii) a non-linear least-squares procedure. For the Cu(II) and Ni(II) ions, the treatment by these two methods provided similar values both for the logarithm of the conditional stability constants (log Kc) and the percentage of fluorescent structures that do not participate in the complexation. The log Kc were (standard deviations in parenthesis): Cu(II) ion, 2.4 (3), 3.37(3), 4.4(1) and 4.92(9), respectively, for pH = 3, 4, 5 and 6; Ni(II)ion, 2.9(1), 3.3(2), and 4.09(3), respectively, for pH = 4, 5 and 6. For Fe(III) an interaction with VLE was observed, but no values for Kc could be obtained.     

大环金属铜(II)、镍(II)配合物的模板合成与晶体结构

用模板法合成了1个大环金属铜(II)配合物[CuLCl₂]·3H₂O (1)和3个大环金属镍(II)配合物[NiLCl₂] (2)，[NiL](ClO₄)₂ (3)和[NiLH₂](ClO₄)₄ (4)(L=3,10-二乙基-1，3，5，8，10，12-六氮杂十四烷)，通过X-射线衍射单晶结构分析测定了它们的晶体结构。晶体结构显示：配合物1和2的金属离子与大环配体的4个氮原子及大环平面轴向的2个氯离子以八面体配位方式配位；配合物3和4的金属离子与大环配体的4个氮原子以平面正方形配位方式配位，配合物4的侧链氮原子的质子化导致侧链结构翻转，使得其侧链与大环平面共面。     

Simple flow injection method for simultaneous spectrophotometric determination of Fe(II) and Fe(III)

The method is based on spectrophotometric determination of Fe(II) and Fe(III) at a single wavelength (530 nm) with the use of a dedicated reversed-flow injection system. In the system, EDTA solution is injected into a carrier stream (HNO₃) and then merged with a sample stream containing a mixture of sulfosalicylic acid and 1,10-phenanthroline as indicators. In an acid environment (pH ≅ 3) the indicators form complexes with both Fe(III) and Fe(II), but EDTA replaces sulfosalicylic acid, forming a more stable colourless complex with Fe(III), whereas Fe(II) remains in a complex with 1,10-phenenthroline. As a result, the area and minimum of the characteristic peak can be exploited as measures corresponding to the Fe(III) and Fe(II) concentrations, respectively. The analytes were not found to affect each other's signals, hence two analytical curves were constructed with the use of a set of standard solutions, each containing Fe(II) and Fe(III). Both analytes were determined in synthetic samples within the concentration ranges of 0.05–4.0 and 0.09–6.0 mg L⁻¹, respectively, with precision less than 1.5 and 2.6% (RSD) and with accuracy less than 4.3 and 5.6% (RE). The method was applied to determination of the analytes in water samples collected from artesian wells and the results of the determination were consistent with those obtained using the ICP-OES technique.     

X-ray structurally characterized Mo (VI), Fe (III) and Cu (II) complexes of amide-imine conjugate: (bio)catalytic and histidine recognition studies

An amide-imine conjugate, (E)-N′-((2-hydroxybenzen-1-yl) methylene)-4-methylbenzohydrazide (H₂L^PTASAL), derived from 4-methyl-benzoic acid hydrazide (PTA) and 2-hydroxybenzaldehyde is used to prepare Mo (VI), Cu (II) and Fe (III) complexes. The X-ray structurally characterized complexes have been explored as catalyst for amine assisted asymmetric ring opening (ARO) of epoxide, carbon-heteroatom cross-coupling and ethyl benzene oxidation. In addition, their catecholase like activities have thoroughly been investigated. Moreover, the Cu (II) complex selectively recognizes histidine by fluorescence spectroscopy.     

Coordination compounds of Co(II), Ni(II) and Cu(II) with capric acid hydrazide

The reaction of aquo-ethanolic solutions of Co(II), Ni(II) and Cu(II) salts and ethanolic solution of capric acid hydrazide (L) yielded paramagnetic, high-spin bis- and tris(ligand) chelate complexes. The tris(ligand) complexes, [ML ₃]X ₂·nH₂O [M=Co(II), Ni(II);X=NO ₃ ^– , ClO ₄ ^– , 1/2SO ₄ ^2– ], have an octahedral structure formed on account of the bidentate (NO) coordination of three neutral hydrazide molecules. In the bis(ligand) complexes,ML ₂(NCS)₂ [M=Co(II), Ni(II)] and CuL ₂ X ₂·nH₂O (X=NO ₃ ^– , ClO ₄ ^– and 1/2SO ₄ ^2– ), the oxoanions and NCS^– take also part in coordination. The complexes have been characterized by elemental analysis, IR spectra, magnetic measurements, molar conductivity and TG analysis.

---

Caprinsäurehydrazid-Komplexe von Co(II), Ni(II) und Cu(II)

Zusammenfassung Durch die Reaktion von wäßrig-ethanolischen Lösungen von Co(II)-, Ni(II)-und Cu(II)-Salzen mit einer ethanolischen Lösung von Caprinsäurehydrazid (L) wurden paramagnetische high-spin Bis- und Tris-Ligand-Chelatkomplexe erhalten. Tris-Ligand-Komplexe des Typs [ML ₃ X ₂·nH₂O [M=Co(II), Ni(II);X=NO ₃ ^– , ClO ₄ ^– , 1/2SO ₄ ^2– ], die eine oktaedrische Struktur besitzen, entstehen durch die Koordination von drei neutralen zweizähnigen (NO)-Hydrazidmolekülen. Bei den Bis-Ligand-KomplexenML ₂(NCS)₂ [M=Co(II), Ni(II)], sowie bei den Bis-Ligand-Komplexen CuL ₂ X ₂·nH₂O (X=NO ₃ ^– , ClO ₄ ^– , 1/2SO ₄ ^2– ) nehmen bei der Koordination außer Hydrazid auch die Säurereste teil. Die Komplexe wurden durch Elementaranalyse, IR-Spektren, magnetische Messungen, molare Leitfähigkeit und TG-Analysen charakterisiert.

     

A Review on Coordination Properties of Al(III) and Fe(III) toward Natural Antioxidant Molecules: Experimental and Theoretical Insights

This review focuses on the ability of some natural antioxidant molecules (i.e., hydroxycinnamic acids, coumarin-3-carboxylic acid, quercetin, luteolin and curcumin) to form Al(III)- and Fe(III)-complexes with the aim of evaluating the coordination properties from a combined experimental and theoretical point of view. Despite the contributions of previous studies on the chemical properties and biological activity of these metal complexes involving such natural antioxidants, further detailed relationships between the structure and properties are still required. In this context, the investigation on the coordination properties of Al(III) and Fe(III) toward these natural antioxidant molecules might deserve high interest to design water soluble molecule-based metal carriers that can improve the metal’s intake and/or its removal in living organisms.     

Formation of iron(III) cluster complexes with a new (N2O2) Schiff base

Two new series of Fe(III) Schiff-base complexes have been prepared and characterized by elemental and thermogravimetric analyses, IR, electronic, ESR and Mössbauer spectra. The Fe(III) complexes possess octahedral, pseudo-octahedral or pseudo-tetrahedral geometries around Fe(III), depending on the nature of the Schiff-base ligand used.     

New method for simultaneous determination of Fe(II) and Fe(III) in water using flow injection technique

The method exploits the possibilities of flow injection gradient titration in a system of reversed flow with spectrophotometric detection. In the developed approach a small amount of titrant (EDTA) is injected into a stream of sample containing a mixture of indicators (sulfosalicylic acid and 1,10-phenanthroline). In acid environment sulfosalicylic acid forms a complex with Fe(III), whereas 1,10-phenanthroline forms a complex with Fe(II). Measurements are performed at wavelength λ = 530 nm when radiation is absorbed by both complexes. After injection EDTA replaces sulfosalicylic acid and forms with Fe(III) more stable colourless complex. As a result, a characteristic “cut off” peak is registered with a width corresponding to the Fe(III) concentration and with a height corresponding to the Fe(II) concentration. Calibration was performed by titration of four two-component standard solutions of the Fe(II)/Fe(III) concentrations established in accordance with 2² factorial plan. The method was tested with the use of synthetic samples and then it was applied to the analysis of water samples taken from artesian wells. Under optimized experimental conditions Fe(II) and Fe(III) were determined with precision less than 0.8 and 2.5% (RSD) and accuracy less than 3.2 and 5.1% (relative error) within the concentration ranges of 0.1-3.0 and 0.9-3.5 mg L⁻¹ of both analytes, respectively.     

Thermal Analysis of Fe(III) Complexes with Salicylaldehyde Semi-, Thiosemi- and S-methylisothiosemi-carbazones

The paper describes the results of differential thermal analysis of the octahedral Fe(III) complexes of the general formula [Fe(HLⁿ)₂]Cl and Fe(HL³)L³, as well as of the corresponding ligands H₂Lⁿ (H₂Lⁿ — tridentate salicylaldehyde semi thiosemi- and S-methylisothiosemi-carabazones with n=1, 2 and 3 respectively). The decomposition of the complexes involving sulphur-containing ligands (H₂L² and H₂L³) starts with sulphur elimination. In case of the complexes [Fe(HL²)]Cl and [Fe(HL³)]Cl sulphur evolves independently, whereas with Fe(HL³)L³ it is eliminated within the SCH₃ group. In the former case, sulphur elimination takes place at the same temperature for both complexes. The change in the coordination mode, being a consequence of the replacement of O by S, has no essential effect on thermal stability of the coordination polyhedron. The complexes involving ONN coordination, realized with the H₂L³ ligand, exhibit a comparatively highest thermal stability of the coordination polyhedron.This revised version was published online in November 2005 with corrections to the Cover Date.     

Determination of Fe(II), Cu(II) and Ag(I) by using silica gel loaded with 1,10-phenanthroline

The modified silica gel with 1,10-phenanthroline adsorbed was obtained. The adsorption from aqueous solutions onto loaded silica gel of Fe(II), Cu(II) and Ag(I) and their complexes was studied. The loaded silica gel was applied to Fe(II), Cu(II) and Ag(I) reflectance spectroscopy determinations in water (detection limits 0.08, 0.03 and 0.01 ppm respectively). Visual test scales for Fe, Cu and Ag ion determinations in water were worked out.     

Ru(III), Cr(III), Fe(III) complexes of Schiff base ligands bearing phenoxy Groups: Application as catalysts in the synthesis of vitamin K3

Two polydentade Schiff base ligands and their Ru(III), Cr(III) and Fe(III) complexes were synthesized and characterized by elemental analysis (C, H, N), UV/Vis, FT IR, ¹H and ¹³C NMR, LC–MS/MS, molar conductivity and magnetic susceptibility techniques. The absorption bands in the electronic spectra and magnetic moment measurements verified an octahedral environment around the metal ions in the complexes. The thermal stabilities were investigated using TGA. The synthesized complexes were used in the catalytic oxidation of 2-methyl naphthalene (2MN) to 2-methyl-1,4-naphthoquinone; vitamin K₃, menadione, 2MNQ; using hydrogen peroxide, acetic acid and sulfuric acid. L₁-Fe(III) complex showed very efficient catalytic activity with 58.54% selectivity in the conversions of 79.11%.     

Novel Isatin-Schiff Base Cu (II) and Ni(II) Complexes. X-ray Crystal Structure of Bis[3-(4-hexylphenylimino)-1H-indol-2(3H)-one]-dichlorocopper(II) Complex

Schiff bases of isatin were reported to possess antibacterial, antifungal, antiviral, anti-HIV, antiprotozoal, and anthelmintic activities1. They also exhibit significantanticonvulsant activity, apart from other pharmacological properties2. Conductingsubs…     

Comparative study on the photophysical properties between carbene-based Fe (II) and Ru (II) complexes

The comparative study on the photophysical properties between cheap metal Fe (II) complexes and noble metal Ru (II) complexes with identical ligand coordination is performed by the combination of density functional theory (DFT) and time-dependent density functional theory (TDDFT) to evaluate the potential alternative applications of Fe (II) complexes. RuBIP (BIP = 2,6-bis (imidazol-2- ylidene)pyridine) is theoretically established that the radiative lifetime of the second lowest triplet state is more consistence with experimental value. However, FeBIP retains nonluminous because of low-lying ³MC originated from weak d orbital splitting. FeBIPC (FeBIP with carboxylic acid groups) has twice longer lifetime than its parent complex FeBIP due to the great decrease of the energy gap between ³MLCT and ³MC. What's more, the lifetimes of Fe (II) complexes detected in the experiments are more accessible to nonradiative decay lifetimes of ³MC. The carboxylic acid groups are beneficial for the improvement of luminescent possibility and controllability of Fe (II) complexes, while there is still a huge challenge for effective material replacement comparing with Ru (II) complexes.     

Simultaneous determination of Fe(II) and Fe(III) by kinetic spectrophotometric H-point standard addition method

The H-point standard addition method (HPSAM) for simultaneous determination of Fe(II) and Fe(III) is described. The method is based on the difference in the rate of complex formation of iron in two different oxidation states with Gallic acid (GA) at pH 5. Fe(II) and Fe(III) can be determined in the range of 0.02–4.50 μg ml⁻¹ and 0.05–5.00 μg ml⁻¹, respectively, with satisfactory accuracy and precision in the presence of other metal ions, which rapidly form complexes with GA under working conditions. The proposed method was successfully applied for simultaneous determination of Fe(II) and Fe(III) in several environmental and synthetic samples with different concentration ratios of Fe(II) and Fe(III).     

Fe(III)-pyruvate and Fe(III)-citrate induced photodegradation of glyphosate in aqueous solutions

The photolysis of Fe(III)-pyruvate and Fe(III)-citrate complexes in water produces hydroxyl radicals in the presence of dissolved oxygen, and can promote the oxidation of organic compounds. The photodegradation of glyphosate with Fe(III)-pyruvate and Fe(III)-citrate complexes was investigated under irradiation at λ?≥?365?nm. The effect of initial concentration of glyphosate, the initial pH value, and the Fe(III)/carboxylate ratio were examined. Upon irradiation of glyphosate aqueous solution with the complexes in the acidic range of natural waters, the bioavailable orthophosphate could be released from degradation of glyphosate. The amount of orthophosphate increased with increasing Fe(III)/carboxylate ratio.