Pore‐Environment Engineering with Multiple Metal Sites in Rare‐Earth Porphyrinic Metal–Organic Frameworks

Multi‐component metal–organic frameworks (MOFs) with precisely controlled pore environments are highly desired owing to their potential applications in gas adsorption, separation, cooperative catalysis, and biomimetics. A series of multi‐component MOFs, namely PCN‐900(RE), were constructed from a combination of tetratopic porphyrinic linkers, linear linkers, and rare‐earth hexanuclear clusters (RE₆) under the guidance of thermodynamics. These MOFs exhibit high surface areas (up to 2523 cm² g^?1) and unlimited tunability by modification of metal nodes and/or linker components. Post‐synthetic exchange of linear linkers and metalation of two organic linkers were realized, allowing the incorporation of a wide range of functional moieties. Two different metal sites were sequentially placed on the linear linker and the tetratopic porphyrinic linker, respectively, giving rise to an ideal platform for heterogeneous catalysis.     

Metal‐Ion Metathesis in Metal–Organic Frameworks: A Synthetic Route to New Metal–Organic Frameworks

A porous metal–organic framework, Mn(H₃O)[(Mn₄Cl)₃(hmtt)₈] (POST‐65), was prepared by the reaction of 5,5′,10,10′,15,15′‐hexamethyltruxene‐2,7,12‐tricarboxylic acid (H₃hmtt) with MnCl₂ under solvothermal conditions. POST‐65(Mn) was subjected to post‐synthetic modification with Fe, Co, Ni, and Cu according to an ion‐exchange method that resulted in the formation of three isomorphous frameworks, POST‐65(Co/Ni/Cu), as well as a new framework, POST‐65(Fe). The ion‐exchanged samples could not be prepared by regular solvothermal reactions. The complete exchange of the metal ions and retention of the framework structure were verified by inductively coupled plasma–atomic emission spectrometry (ICP‐AES), powder X‐ray diffraction (PXRD), and Brunauer–Emmett–Teller (BET) surface‐area analysis. Single‐crystal X‐ray diffractions studies revealed a single‐crystal‐to‐single‐crystal (SCSC)‐transformation nature of the ion‐exchange process. Hydrogen‐sorption and magnetization measurements showed metal‐specific properties of POST‐65.     

Defect‐Engineered Metal–Organic Frameworks

Defect engineering in metal–organic frameworks (MOFs) is an exciting concept for tailoring material properties, which opens up novel opportunities not only in sorption and catalysis, but also in controlling more challenging physical characteristics such as band gap as well as magnetic and electrical/conductive properties. It is challenging to structurally characterize the inherent or intentionally created defects of various types, and there have so far been few efforts to comprehensively discuss these issues. Based on selected reports spanning the last decades, this Review closes that gap by providing both a concise overview of defects in MOFs, or more broadly coordination network compounds (CNCs), including their classification and characterization, together with the (potential) applications of defective CNCs/MOFs. Moreover, we will highlight important aspects of “defect‐engineering” concepts applied for CNCs, also in comparison with relevant solid materials such as zeolites or COFs. Finally, we discuss the future potential of defect‐engineered CNCs.     

Thermodynamics of Hydrogen Adsorption on Metal‐Organic Frameworks

Interaction between adsorbed hydrogen and the coordinatively unsaturated Mg²⁺ and Co²⁺ cationic centres in Mg‐MOF‐74 and Co‐MOF‐74, respectively, was studied by means of variable‐temperature infrared (VTIR) spectroscopy. Perturbation of the H₂ molecule by the cationic adsorbing centre renders the H? H stretching mode IR‐active at 4088 and 4043 cm^?1 for Mg‐MOF‐74 and Co‐MOF‐74, respectively. Simultaneous measurement of integrated IR absorbance and hydrogen equilibrium pressure for spectra taken over the temperature range of 79–95 K allowed standard adsorption enthalpy and entropy to be determined. Mg‐MOF‐74 showed ΔH⁰=?9.4 kJ mol^?1 and ΔS⁰=?120 J mol^?1 K^?1, whereas for Co‐MOF‐74 the corresponding values of ΔH⁰=?11.2 kJ mol^?1 and ΔS⁰=?130 J mol^?1 K^?1 were obtained. The observed positive correlation between standard adsorption enthalpy and entropy is discussed in the broader context of corresponding data for hydrogen adsorption on cation‐exchanged zeolites, with a focus on the resulting implications for hydrogen storage and delivering.     

Metal–Covalent Organic Frameworks (MCOFs): A Bridge Between Metal–Organic Frameworks and Covalent Organic Frameworks

Many sophisticated chemical and physical properties of porous materials strongly rely on the presence of the metal ions within the structures. Whereas homogeneous distribution of metals is conveniently realized in metal–organic frameworks (MOFs), the limited stability potentially restricts their practical implementation. From that perspective, the development of metal–covalent organic frameworks (MCOFs) may address these shortcomings by incorporating active metal species atop highly stable COF backbones. This Minireview highlights examples of MCOFs that tackle important issues from their design, synthesis, characterization to cutting‐edge applications.     

Advances of Metal‐Organic Frameworks in Energy and Environmental Applications

Nowadays, energy shortage and environmental pollution issues are increasingly severe and urgent to be solved. The effective storage and use of environmentally friendly fuels and removal of harmful gases from the environment are great challenges and of great importance both for the environment protection and for human health. Porous metal‐organic frameworks (MOFs) are highly ordered crystalline materials formed by the self‐assembly process of metal ions and organic ligands. Their good features such as ultrahigh porosity, large surface area, structural diversity and functionalities make them promising candidates for applications in energy and environmental fields. MOF thin films and MOF composites have also been investigated to further enhance the properties and introduce new functionalities. This review provides an overview of the synthesis methods of pristine MOFs, MOF thin films and MOF composites, and significant advances of MOFs in energy and environment applications such as energy storage (H₂, CH₄), CO₂ capture and separation, adsorption removal and sensing of harmful gases in the environment.     

Multi‐shelled Hollow Metal–Organic Frameworks

Hollow metal–organic frameworks (MOFs) are promising materials with sophisticated structures, such as multiple shells, that cannot only enhance the properties of MOFs but also endow them with new functions. Herein, we show a rational strategy to fabricate multi‐shelled hollow chromium (III) terephthalate MOFs (MIL‐101) with single‐crystalline shells through step‐by‐step crystal growth and subsequent etching processes. This strategy relies on the creation of inhomogeneous MOF crystals in which the outer layer is chemically more robust than the inner layer and can be selectively etched by acetic acid. The regulation of MOF nucleation and crystallization allows the tailoring of the cavity size and shell thickness of each layer. The resultant multi‐shelled hollow MIL‐101 crystals show significantly enhanced catalytic activity during styrene oxidation. The insight gained from this systematic study will aid in the rational design and synthesis of other multi‐shelled hollow structures and the further expansion of their applications.     

Surface‐Specific Functionalization of Nanoscale Metal–Organic Frameworks

A method for modifying the external surfaces of a series of nanoscale metal–organic frameworks (MOFs) with 1,2‐dioleoyl‐sn‐glycero‐3‐phosphate (DOPA) is presented. A series of zirconium‐based nanoMOFs of the same topology (UiO‐66, UiO‐67, and BUT‐30) were synthesized, isolated as aggregates, and then conjugated with DOPA to create stably dispersed colloids. BET surface area analysis revealed that these structures maintain their porosity after surface functionalization, providing evidence that DOPA functionalization only occurs on the external surface. Additionally, dye‐labeled ligand loading studies revealed that the density of DOPA on the surface of the nanoscale MOF correlates to the density of metal nodes on the surface of each MOF. Importantly, the surface modification strategy described will allow for the general and divergent synthesis and study of a wide variety of nanoscale MOFs as stable colloidal materials.     

Stimulus‐Responsive Metal–Organic Frameworks

Materials that can recognize the changes in their local environment and respond by altering their inherent physical and/or chemical properties are strong candidates for future “smart” technology materials. Metal–organic frameworks (MOFs) have attracted a great deal of attention in recent years owing to their designable architecture, host–guest chemistry, and softness as porous materials. Despite this fact, studies on the tuning of the properties of MOFs by external stimuli are still rare. This review highlights the recent developments in the field of stimulus‐responsive MOFs or so‐called smart MOFs. In particular, the various stimuli used and the utility of stimulus‐responsive smart MOFs for various applications such as gas storage and separation, sensing, clean energy, catalysis, molecular motors, and biomedical applications are highlighted by using representative examples. Future directions in the developments of stimulus‐responsive smart MOFs and their applications are proposed from a personal perspective.     

Synthesis,Structures, and Luminescent Properties of two 3, 5‐Dimethyl‐1‐H‐1, 2,4‐triazole‐Based Zinc Metal‐Organic Frameworks with Aromatic Carboxylate as Coligand

Two metal‐organic frameworks, [Zn(dmtrz)(btrc)_1/3]_n ( 1 ) and [Zn₂(dmtrz)₂(btec)(H₂O)₂]_n ( 2 ) (dmtrz = 3, 5‐dimethyl‐1‐H‐1, 2,4‐triazole, btrc = 1, 3,5‐benzenetricarboxylate, btec = 1, 2,4, 5‐benzenetetracarboxylate), were synthesized by hydrothermal reaction. The crystal structure analysis reveals that compound 1 is a dense 3D framework with Schläfli symbols of {4³}₂{4⁶ · 6⁶ · 8³}₃, which is a loh1 structure. Compound 2 is a 2D network. In addition, the photoluminescence of two compounds were studied in solid state at room temperature, together with their thermal analysis.     

Multi‐Photon Absorption in Metal–Organic Frameworks

Multi‐photon absorption (MPA) is among the most prominent nonlinear optical (NLO) effects and has applications, for example in telecommunications, defense, photonics, and bio‐medicines. Established MPA materials include dyes, quantum dots, organometallics and conjugated polymers, most often dispersed in solution. We demonstrate how metal–organic frameworks (MOFs), a novel NLO solid‐state materials class, can be designed for exceptionally strong MPA behavior. MOFs consisting of zirconium‐ and hafnium‐oxo‐clusters and featuring a chromophore linker based on the tetraphenylethene (TPE) molecule exhibit record high two‐photon absorption (2PA) cross‐section values, up to 3600 GM. The unique modular building‐block principle of MOFs allows enhancing and optimizing their MPA properties in a theory‐guided approach by combining tailored charge polarization, conformational strain, three‐dimensional arrangement, and alignment of the chromophore linkers in the crystal.     

Solvent‐Dependent Cation Exchange in Metal–Organic Frameworks

We investigated which factors govern the critical steps of cation exchange in metal–organic frameworks by studying the effect of various solvents on the insertion of Ni²⁺ into MOF‐5 and Co²⁺ into MFU‐4l. After plotting the extent of cation insertion versus different solvent parameters, trends emerge that offer insight into the exchange processes for both systems. This approach establishes a method for understanding critical aspects of cation exchange in different MOFs and other materials.     

Multifunctional,Defect‐Engineered Metal–Organic Frameworks with Ruthenium Centers: Sorption and Catalytic Properties

A mixed‐linker solid‐solution approach was employed to modify the metal sites and introduce structural defects into the mixed‐valence Ru^II/III structural analogue of the well‐known MOF family [M₃^II,II(btc)₂] (M=Cu, Mo, Cr, Ni, Zn; btc=benzene‐1,3,5‐tricarboxylate), with partly missing carboxylate ligators at the Ru₂ paddle‐wheels. Incorporation of pyridine‐3,5‐dicarboxylate (pydc), which is the same size as btc but carries lower charge, as a second, defective linker has led to the mixed‐linker isoreticular derivatives of Ru‐MOF, which display characteristics unlike those of the defect‐free framework. Along with the creation of additional coordinatively unsaturated sites, the incorporation of pydc induces the partial reduction of ruthenium. Accordingly, the modified Ru sites are responsible for the activity of the “defective” variants in the dissociative chemisorption of CO₂, the enhanced performance in CO sorption, the formation of hydride species, and the catalytic hydrogenation of olefins.     

Metal–Organic Frameworks for Oxygen Storage

We present a systematic study of metal–organic frameworks (MOFs) for the storage of oxygen. The study starts with grand canonical Monte Carlo simulations on a suite of 10 000 MOFs for the adsorption of oxygen. From these data, the MOFs were down selected to the prime candidates of HKUST‐1 (Cu‐BTC) and NU‐125, both with coordinatively unsaturated Cu sites. Oxygen isotherms up to 30 bar were measured at multiple temperatures to determine the isosteric heat of adsorption for oxygen on each MOF by fitting to a Toth isotherm model. High pressure (up to 140 bar) oxygen isotherms were measured for HKUST‐1 and NU‐125 to determine the working capacity of each MOF. Compared to the zeolite NaX and Norit activated carbon, NU‐125 has an increased excess capacity for oxygen of 237 % and 98 %, respectively. These materials could ultimately prove useful for oxygen storage in medical, military, and aerospace applications.     

Switching in Metal–Organic Frameworks

In recent years, metal–organic frameworks (MOFs) have become an area of intense research interest because of their adjustable pores and nearly limitless structural diversity deriving from the design of different organic linkers and metal structural building units (SBUs). Among the recent great challenges for scientists include switchable MOFs and their corresponding applications. Switchable MOFs are a type of smart material that undergo distinct, reversible, chemical changes in their structure upon exposure to external stimuli, yielding interesting technological applicability. Although the process of switching shares similarities with flexibility, very limited studies have been devoted specifically to switching, while a fairly large amount of research and a number of Reviews have covered flexibility in MOFs. This Review focuses on the properties and general design of switchable MOFs. The switching activity has been delineated based on the cause of the switching: light, spin crossover (SCO), redox, temperature, and wettability.     

Metal‐Organic Frameworks as Platform for Lewis‐Acid‐Catalyzed Organic Transformations

Metal‐organic frameworks (MOFs) are highly promising Lewis acid catalysts; they either inherently possess Lewis acid sites (LASs) on it or the LASs can be generated through various post‐synthetic methods, the later can be performed in MOFs in a trivial fashion. MOFs are suitable platform for catalysis because of its highly crystalline and porous nature. Moreover, with recent advancements, thermal and chemical stability is not a problem with many MOFs. In this Minireview, an enormous versatility of MOFs, in terms of their microporosity/mesoporosity, size/shape selectivity, chirality, pore size, etc., has been highlighted. These are advantageous for designing and performing various targeted organic transformations. Although, many organic transformations catalyzed by MOFs with LASs have been reported in the recent past. In this Minireview, we have restricted ourselves to four important organic reactions: (i) cyanosilylation, (ii) Diels–Alder reaction, (iii) C?H activation, and (iv) CO₂‐addition. The discussion focuses mostly on the recent reports (42 examples).     

In Situ Modification of Metal–Organic Frameworks in Mixed‐Matrix Membranes

Processable films of metal–organic frameworks (MOFs) have been long sought to advance the application of MOFs in various technologies from separations to catalysis. Herein, MOF–polymer mixed‐matrix membranes (MMMs) are described, formed on several substrates using a wide variety of MOF materials. These MMMs can be delaminated from their substrates to create free‐standing MMMs that are mechanically stable and pliable. The MOFs in these MMMs remain highly crystalline, porous, and accessible for further chemical modification through postsynthetic modification (PSM) and postsynthetic exchange (PSE) processes. Overall, the findings here demonstrate a versatile approach to preparing stable functional MMMs that should contribute significantly to the advancement of these materials.