In Situ Synthesis of an Aptamer-Based Polyvalent Antibody Mimic on the Cell Surface for Enhanced Interactions between Immune and Cancer Cells

An ability to promote therapeutic immune cells to recognize cancer cells is important for the success of cell-based cancer immunotherapy. We present a synthetic method for functionalizing the surface of natural killer (NK) cells with a supramolecular aptamer-based polyvalent antibody mimic (PAM). The PAM is synthesized on the cell surface through nucleic acid assembly and hybridization. The data show that PAM has superiority over its monovalent counterpart in powering NKs to bind to cancer cells, and that PAM-engineered NK cells exhibit the capability of killing cancer cells more effectively. Notably, aptamers can, in principle, be discovered against any cell receptors; moreover, the aptamers can be replaced by any other ligands when developing a PAM. Thus, this work has successfully demonstrated a technology platform for promoting interactions between immune and cancer cells.     

Self‐Assembled Aptamer‐Based Drug Carriers for Bispecific Cytotoxicity to Cancer Cells

Monovalent aptamers can deliver drugs to target cells by specific recognition. However, different cancer subtypes are distinguished by heterogeneous biomarkers and one single aptamer is unable to recognize all clinical samples from different patients with even the same type of cancers. To address heterogeneity among cancer subtypes for targeted drug delivery, as a model, we developed a drug carrier with a broader recognition range of cancer subtypes. This carrier, sgc8c‐sgd5a (SD), was self‐assembled from two modified monovalent aptamers. It showed bispecific recognition abilities to target cells in cell mixtures; thus broadening the recognition capabilities of its parent aptamers. The self‐assembly of SD simultaneously formed multiple drug loading sites for the anticancer drug doxorubicin (Dox). The Dox‐loaded SD (SD–Dox) also showed bispecific abilities for target cell binding and drug delivery. Most importantly, SD–Dox induced bispecific cytotoxicity in target cells in cell mixtures. Therefore, by broadening the otherwise limited recognition capabilities of monovalent aptamers, bispecific aptamer‐based drug carriers would facilitate aptamer applications for clinically heterogeneous cancer subtypes that respond to the same cancer therapy.     

Rapid Formation of a Supramolecular Polypeptide–DNA Hydrogel for In Situ Three‐Dimensional Multilayer Bioprinting

A rapidly formed supramolecular polypeptide–DNA hydrogel was prepared and used for in situ multilayer three‐dimensional bioprinting for the first time. By alternative deposition of two complementary bio‐inks, designed structures can be printed. Based on their healing properties and high mechanical strengths, the printed structures are geometrically uniform without boundaries and can keep their shapes up to the millimeter scale without collapse. 3D cell printing was demonstrated to fabricate live‐cell‐containing structures with normal cellular functions. Together with the unique properties of biocompatibility, permeability, and biodegradability, the hydrogel becomes an ideal biomaterial for 3D bioprinting to produce designable 3D constructs for applications in tissue engineering.     

Non‐Covalent Polyvalent Ligands by Self‐Assembly of Small Glycodendrimers: A Novel Concept for the Inhibition of Polyvalent Carbohydrate–Protein Interactions In Vitro and In Vivo

Polyvalent carbohydrate–protein interactions occur frequently in biology, particularly in recognition events on cellular membranes. Collectively, they can be much stronger than corresponding monovalent interactions, rendering it difficult to control them with individual small molecules. Artificial macromolecules have been used as polyvalent ligands to inhibit polyvalent processes; however, both reproducible synthesis and appropriate characterization of such complex entities is demanding. Herein, we present an alternative concept avoiding conventional macromolecules. Small glycodendrimers which fulfill single molecule entity criteria self‐assemble to form non‐covalent nanoparticles. These particles—not the individual molecules—function as polyvalent ligands, efficiently inhibiting polyvalent processes both in vitro and in vivo. The synthesis and characterization of these glycodendrimers is described in detail. Furthermore, we report on the characterization of the non‐covalent nanoparticles formed and on their biological evaluation.     

In Situ Scatheless Cell Detachment Reveals Correlation between Adhesion Strength and Viability at Single‐Cell Resolution

Single‐cell biology provides insights into some of the most fundamental processes in biology and promotes the understanding of life's mysteries. As the technologies to study single‐cells expand, they will require sophisticated analytical tools to make sense of various behaviors and components of single‐cells as well as their relations in the adherent tissue culture. In this paper, we revealed cell heterogeneity and uncovered the connections between cell adhesion strength and cell viability at single‐cell resolution by extracting single adherent cells of interest from a standard tissue culture by using a microfluidic chip‐based live single‐cell extractor (LSCE). We believe that this method will provide a valuable new tool for single‐cell biology.     

Synthesis of Small‐Molecule Fluorescent Probes for the In Vitro Imaging of Calcium‐Activated Potassium Channel KCa3.1

Small‐molecule probes for the in vitro imaging of K_Ca3.1 channel‐expressing cells were developed. Senicapoc, showing high affinity and selectivity for the K_Ca3.1 channels, was chosen as the targeting component. BODIPY dyes 15 – 20 were synthesized and connected by a Cu^I‐catalyzed azide–alkyne [3+2]cycloaddition with propargyl ether senicapoc derivative 8 , yielding fluorescently labeled ligands 21 – 26 . The dimethylpyrrole‐based imaging probes 25 and 26 allow staining of K_Ca3.1 channels in NSCLC cells. The specificity was shown by removing the punctate staining pattern by pre‐incubation with senicapoc. The density of K_Ca3.1 channels detected with 25 and by immunostaining was identical. The punctate structure of the labeled channels could also be observed in living cells. Molecular modeling showed binding of the senicapoc‐targeting component towards the binding site within the ion channel and orientation of the linker with the dye along the inner surface of the ion channel.     

In Situ Synthesis of Alkenyl Tetrazines for Highly Fluorogenic Bioorthogonal Live‐Cell Imaging Probes

In spite of the wide application potential of 1,2,4,5‐tetrazines, particularly in live‐cell and in vivo imaging, a major limitation has been the lack of practical synthetic methods. Here we report the in situ synthesis of (E)‐3‐substituted 6‐alkenyl‐1,2,4,5‐tetrazine derivatives through an elimination–Heck cascade reaction. By using this strategy, we provide 24 examples of π‐conjugated tetrazine derivatives that can be conveniently prepared from tetrazine building blocks and related halides. These include tetrazine analogs of biological small molecules, highly conjugated buta‐1,3‐diene‐substituted tetrazines, and a diverse array of fluorescent probes suitable for live‐cell imaging. These highly conjugated probes show very strong fluorescence turn‐on (up to 400‐fold) when reacted with dienophiles such as cyclopropenes and trans‐cyclooctenes, and we demonstrate their application for live‐cell imaging. This work provides an efficient and practical synthetic methodology for tetrazine derivatives and will facilitate the application of conjugated tetrazines, particularly as fluorogenic probes for live‐cell imaging.     

Supramolecular Fluorescent Nanoparticles Constructed via Multiple Non‐Covalent Interactions for the Detection of Hydrogen Peroxide in Cancer Cells

Overabundance of hydrogen peroxide originating from environmental stress and/or genetic mutation can lead to pathological conditions. Thus, the highly sensitive detection of H₂O₂ is important. Herein, supramolecular fluorescent nanoparticles self‐assembled from fluorescein isothiocyanate modified β‐cyclodextrin (FITC‐β‐CD)/rhodamine B modified ferrocene (Fc‐RB) amphiphile were prepared through host–guest interaction between FITC‐β‐CD host and Fc‐RB guest for H₂O₂ detection in cancer cells. The self‐assembled nanoparticles based on a combination of multiple non‐covalent interactions in aqueous medium showed high sensitivity to H₂O₂ while maintaining stability under physiological condition. Owing to the fluorescence resonance energy transfer (FRET) effect, addition of H₂O₂ led to obvious fluorescence change of nanoparticles from red (RB) to green (FITC) in fluorescent experiments. In vitro study showed the fluorescent nanoparticles could be efficiently internalized by cancer cells and then disrupted by endogenous H₂O₂, accompanying with FRET from “on” to “off”. These supramolecular fluorescent nanoparticles constructed via multiple non‐covalent interactions are expected to have potential applications in diagnosis and imaging of diseases caused by oxidative stresses.     

In Situ Electrochemical Synthesis of Oriented and Defect‐Free AEL Molecular‐Sieve Films Using Ionic Liquids

Simply preparing oriented and defect‐free molecular‐sieve films have been a long‐standing challenge both in academia and industry. Most of the early works focus on the careful and multiple controls of the seeds layer or synthesis conditions. Herein, we report a one‐step in situ electrochemical ionothermal method that combines a controllable electric field with ionic liquids. We demonstrate that an in‐plane oriented and defect‐free AEL (one molecular‐sieve framework type) molecular‐sieve film was obtained using an Al electrode as the Al source. The excellent corrosion‐resistant performance of the film makes this technology promising in multiple applications, such as anti‐corrosion coatings.     

In Situ Observation of Hydrogen‐Induced Surface Faceting for Palladium–Copper Nanocrystals at Atmospheric Pressure

Nanocrystal (NC) morphology, which decides the number of active sites and catalytic efficiency, is strongly determined by the gases involved in synthesis, treatment, and reaction. Myriad investigations have been performed to understand the morphological response to the involved gases. However, most prior work is limited to low pressures, which is far beyond realistic conditions. A dynamic morphological evolution of palladium–copper (PdCu) NC within a nanoreactor is reported, with atmospheric pressure hydrogen at the atomic scale. In situ transmission electron microscopy (TEM) videos reveal that spherical PdCu particles transform into truncated cubes at high hydrogen pressure. First principles calculations demonstrate that the surface energies decline with hydrogen pressure, with a new order of γ_H‐001<γ_H‐110<γ_H‐111 at 1 bar. A comprehensive Wulff construction based on the corrected surface energies is perfectly consistent with the experiments. The work provides a microscopic insight into NC behaviors at realistic gas pressure and is promising for the shaping of nanocatalysts by gas‐assisted treatments.     

Simulation of the self‐assembly of poly(α‐glutamate) and dodecyltrimethylammonium: Diffusive role of the surfactant cations

The self‐assembly process of stoichiometric complexes formed by poly(α‐glutamate) and dodecyltrimethylammonium molecular cations has been studied at the atomistic by molecular dynamics simulations. The results presented in this work depict a time‐dependent succession of events. Among them, the formation of the assembled complex is an extraordinarily fast event. On the other side, the surfactant units do not influence the kinetics of the polypeptide folding process, showing that the characteristic independent organization experimentally detected for the charged groups and aliphatic tails has its reflection during the assembly process. Through these results, it is possible to infer new strategies to engineer the final nano‐organization that these stoichiometric complexes can adopt. The instantaneous assembly of the oppositely charged components allows a further kinetic control over the polypeptide folding process, which is expected to take place in time scales that are between 10 and 100 times larger than those explored in this work. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 917–924, 2008     

Facile In Situ Synthesis of Hierarchical Porous Ni/Ni(OH)2 Hybrid Sponges with Excellent Electrochemical Energy‐Storage Performances for Supercapacitors

Herein, we report the in situ growth of single‐crystalline Ni(OH)₂ nanoflakes on a Ni support by using facile hydrothermal processes. The as‐prepared Ni/Ni(OH)₂ sponges were well‐characterized by using X‐ray diffraction (XRD), SEM, TEM, and X‐ray photoelectron spectroscopy (XPS) techniques. The results revealed that the nickel‐skeleton‐supported Ni(OH)₂ rope‐like aggregates were composed of numerous intercrossed single‐crystal Ni(OH)₂ flake‐like units. The Ni/Ni(OH)₂ hybrid sponges served as electrodes and displayed ultrahigh specific capacitance (SC=3247 F g^?1) and excellent rate‐capability performance, likely owing to fast electron and ion transport, sufficient Faradic redox reaction, and robust structural integrity of the Ni/Ni(OH)₂ hybrid electrode. These results support the promising application of Ni(OH)₂ nanoflakes as advanced pseudocapacitor materials.     

A Novel Type of Vesicles Based on Ionic and π–π Interactions

Electrostatic self‐assembly can be used to form supramolecular vesicles in aqueous solution. Vesicles consist of cationic G8 poly(amidoamine) dendrimers and the trivalent sulfonate dye Ar27. No classical amphiphiles are present but the interplay of electrostatics, π–π interaction and geometric factors influences the structure formation. Labeled guest molecules, both small molecules and peptides, can be included inside these vesicles and vesicles imaged by fluorescence techniques. The structure was studied by dynamic and static light scattering, small‐angle neutron scattering, confocal laser scanning microscopy, and fluorescence correlation spectroscopy. The study indicates the prospect of constructing functional nanoobjects by the self‐assembly of charged molecules in aqueous solution.

     

Self‐Templating and In Situ Assembly of a Cubic Cluster‐of‐Clusters Architecture Based on a {Mo24Fe12} Inorganic Macrocycle

Engineering self‐templating inorganic architectures is critical for the development of bottom‐up approaches to nanoscience, but systems with a hierarchy of templates are elusive. Herein we describe that the cluster‐anion‐templated (CAT) assembly of a {CAT}?{Mo₂₄Fe₁₂} macrocycle forms a giant ca. 220 nm³ unit cell containing 16 macrocycles clustered into eight face‐shared tetrahedral cluster‐of‐clusters assemblies. We show that {CAT}?{Mo₂₄Fe₁₂} with different CATs gives the compounds 1 – 4 for CAT=Anderson {FeMo₆} ( 1 ), Keggin {PMo₁₂} ( 2 ), Dawson {P₂W₁₈} ( 3 ), and {Mo₁₂O₃₆(HPO₃)₂} ( 4 ) polyoxometalates. “Template‐free” assembly can be achieved, whereby the macrocycle components can also form a template in situ allowing template to macrocycle to superstructure formation and the ability to exchange the templates. Furthermore, the transformation of template clusters within the inorganic macrocycle {Mo₂₄Fe₁₂} allows the self‐generation of an uncapped {Mo₁₂O₃₆(HPO₃)₂} in compound 4 .     

Coordination‐Driven In Situ Self‐Assembly Strategy for the Preparation of Metal–Organic Framework Hybrid Membranes

Metal–organic frameworks (MOFs) have emerged as porous solids of a superior type for the fabrication of membranes. However, it is still challenging to prepare a uniformly dispersed robust MOF hybrid membrane. Herein, we propose a simple and powerful strategy, namely, coordination‐driven in situ self‐assembly, for the fabrication of MOF hybrid membranes. On the basis of the coordination interactions between metal ions and ligands and/or the functional groups of the organic polymer, this method was confirmed to be feasible for the production of a stable membrane with greatly improved MOF‐particle dispersion in and compatibility with the polymer, thus providing outstanding separation ability. As an experimental proof of concept, a high‐quality ZIF‐8/PSS membrane was fabricated that showed excellent performance in the nanofiltration and separation of dyes from water.