Electroanalysis of Bisphenols A,F, and Z Using Graphene Based Stochastic Microsensors

Two stochastic microsensors based on immobilization of the complex between protoporphyrin IX and cobalt on nanographene paste and on the reduced graphene oxide paste were proposed for the simultaneous identification and quantification of bisphenols A (BPA), F (BPF) and Z (BPZ) from water samples. The signatures obtained for the BPA, BPF, and BFZ when both stochastic microsensors were used shown that the microsensors can be used for the discrimination between the three bisphenols in water samples. Very low limits of determination were obtained for the three bisphenols: 1fmol/L for BPA and BPF when the microsensor based on the immobilization of the complex between protoporphyrin IX and cobalt on nanographene paste was used, and 10fmol/L for BPZ when the microsensor based on the immobilization of the complex between protoporphyrin IX and cobalt on reduced graphene oxide paste was used. The linear concentration ranges covered by the proposed stochastic microsensors were: between 10^?15 and 10^?5 mol/L for BPA, between 10^?15 and 10^?7 mol/L for BPF, and between 10^?13 and 10^?10 mol/L for BPZ. The recoveries of the bisphenols in water samples were higher than 99.50 %, with RSD values lower than 1.00 %.     

Molecular Recognition of Aflatoxin M1 in Water and Milk Samples

Two stochastic microsensors based on diamond paste modified with 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) were proposed for the molecular recognition of aflatoxin M1 in water and milk samples. Two types of diamond were used: a monocrystalline diamond powder (1 μm) (DP) and a nanopowder of monocrystalline diamond (10 nm) (nDP) for the design of the stochastic microsensors. The microsensors were incorporated as combined stochastic microsensors (a microcell containing the stochastic microsensor and the Pt wire, and a Ag/AgCl sensor) in a platform used for monitoring of waste waters and milk samples. The platforms were used for the fast screening of water and milk samples for the qualitative and quantitative analysis of aflatoxin M1 at very low concentration levels (up to 0.001 fg/L). The linear concentration ranges were wide, being able to cover concentrations between 0.001 fg/L to 20 μg/L. The highest sensitive microsensor (sensitivity of 4.74×10¹⁰ s mg^?1 L) was the one based on nDP. The results provided by the platforms were in agreement with those obtained by utilization of standard method (ISO certified methods (HPLC/fluorescence method)), recoveries being higher than 99.00 % and RSD lower than 1.00 % proving that the method can be reliable used for molecular recognition of aflatoxin M1 in water and milk samples.     

Flow-injection chemiluminescence determination of penicillin antibiotics in drugs and human urine using luminol-Ag(III) complex system

A chemiluminescent (CL) system based on the reaction of an Ag(III) complex with luminol in alkaline medium is presented. Gamma order of magnitude penicillin species antibiotics could dramatically enhance CL intensities. Coupled with flow injection analysis (FIA), a novel sensitive chemiluminescent analytical technique for some penicillin antibiotics in drugs and urine samples is introduced. Under optimum conditions, benzylpenicillin sodium, amoxicillin, ampicillin and cloxacillin sodium were determinated. Detection limits of this method are 70 ng/mL for benzylpenicillin sodium, 67 ng/mL for amoxicillin, 169 ng/mL for ampicillin and 64 ng/mL for cloxacillin sodium. For the spiked urine samples, the recoveries of the four drugs were in the range of 106–112% for benzylpenicillin sodium, 104–110% for amoxicillin, 104–106% for ampicillin, and 103–105% for cloxacillin sodium. Based on the fluorescence spectra, free radical trapping experiment, and chemiluminescent spectra, a possible reaction mechanism is suggested.     

Chitosan Based Diamond Paste Stochastic Microsensors Modified with Gold Nanoparticles Detect Hepatitis C Virus Core Antigen

Three types of chitosan (chitosan I (n=371–744), chitosan II (n=682–930), and chitosan III (n=868–1365)) as well as gold nanoparticles (10 nm diameter) were used to modify diamond paste for the design of new stochastic microsensors. Hepatitis C virus core antigen was used as model analyte to prove the stochastic behavior of the proposed microsensors. The microsensors cover a linear range of concentration between 40 fg/mL and 4 ng/mL. The highest sensitivity (1.38×10⁵ s^?1/mg/mL) and the lower limit of determination (40 fg/mL) were obtained for chitosan III based microsensor. The hepatitis C virus core antigen was assayed from whole blood samples with recoveries higher than 98.00 %.     

Trace determination of beta-lactam antibiotics in surface water and urban wastewater using liquid chromatography combined with electrospray tandem mass spectrometry

A sensitive and reliable method using liquid chromatography-electrospray tandem mass spectrometry has been developed and validated for the trace determination of beta-lactam antibiotics in natural and wastewater matrices. Water samples were enriched by solid-phase extraction. The analytes included amoxicillin (AMOX), ampicillin (AMP), oxacillin (OXA), cloxacillin (CLOX) and cephapirin (CEP). Average recoveries of beta-lactams (BLs) in fortified samples were generally above 75% (except amoxicillin) with the standard deviations lower than 10% in water matrices. Amoxicillin was not quantified due to poor recovery (less than 40%) in the investigated water matrices. Matrix effects were found to be minimal when measuring these compounds in water matrices. The accuracy, within- and between-run precision of the assay fell within acceptable ranges of 15% absolute. The method detection limit (MDL) was estimated to range between 8 and 10 ng/L in surface water, 13 and 18 ng/L in the influent and 8 and 15 ng/L in the effluent from a wastewater treatment plant. A large number of actual water samples were analyzed using this method in order to evaluate the occurrence of the beta-lactams in a river and a wastewater treatment plant in northern Colorado. Most of the samples were negative for all analytes. These compounds were found at 15-17 ng/L in the three influent samples and at 9-11 ng/L in three surface water samples out of a total of 200 samples. This indicates that contamination by beta-lactam antibiotics is of minor importance to the small mixed-watershed.     

Use of SDS micelles for improving sensitivity, resolution, and speed in the analysis of beta-lactam antibiotics in environmental waters by SPE and CE

This study dealt with the potential of MEKC with LIF detection involving derivatization with sulfoindocyanine succinimidyl ester (Cy5) for the separation and determination of beta-lactam antibiotics (ampicillin, amoxicillin, cephradine, and cephalexin) in environmental water samples. Water samples of 50 mL were enriched by SPE by passage through a weak base-cation Amberlite(R) IRA-93 exchange column. SDS micelles play important roles in the whole analytical process by improving the yield (sensitivity) and the kinetics of the labeling reaction, the elution of the retained antibiotics from the SPE preconcentration system and the electrophoretic resolution of their Cy5-derivatives. The optimum procedure includes a derivatization step of the antibiotics at 25 degrees C for 10 min and direct injection for MEKC analysis, which is conducted within about 15 min using 15 mM SDS in the running buffer (35 mM sodium borate at pH 9.3). LODs from 30 to 45 ng/L and RSDs (within-day precision) from 3.5 to 5.9% were obtained for the antibiotics in water samples with average recoveries ranging from 96.4 to 99.4%. These results indicate that the method proposed is a straightforward and sensitive tool for the determination of these antibiotics in environmental water samples providing similar quantitative results to those using more expensive equipment like LC-electrospray MS/MS.     

Parallux beta-lactam: a capillary-based fluorescent immunoassay for the determination of penicillin-G, ampicillin, amoxicillin, cloxacillin, cephapirin, and ceftiofur in bovine milk

An analytical system was developed for detection of antibiotic residues in bovine milk. The method is based on competitive fluorescent immunoassays in glass capillary tubes (U.S. Patent No. 5,624,850). The system consists of an assay cartridge containing 4 glass capillaries, a reagent tray with 4 wells of dried reagents, and a Parallux processor, which processes the assay, reads fluorescent output, and reports test results. Minimum sensitivity for detection of 6 beta-lactam antibiotics in bovine milk was determined to be penicillin-G, 3.2 ppb; ampicillin, 2.9 ppb; amoxicillin, 3.6 ppb; cloxacillin, 7.4 ppb; cephapirin, 16.3 ppb; and ceftiofur, 33.7 ppb. The assay system was also specific and sensitive for detection of incurred residues at U.S. Food and Drug Administration tolerance levels: penicillin-G, 5 ppb; ampicillin, 10 ppb; amoxicillin, 10 ppb; cloxacillin, 10 ppb; cephapirin, 20 ppb; and ceftiofur, 50 ppb. There was no interference in detection of minimum sensitivity levels of antibiotic by the presence of somatic cells at approximately 1 x 10(6) cells/mL. Milk containing 3 x 10(6) cells/mL bacteria commonly found in mastitic milk also showed no interference when tolerance levels of antibiotic were present. There was no detectable interference on results by a wide variety of non-beta-lactam drugs.     

Simultaneous determination of β-lactamic antibiotics by a new high-performance low-pressure chromatographic system using a multisyringe burette coupled to a monolithic column (MSC)

A technique based on multisyringe chromatography (MSC) was developed to determine three beta-lactamic antibiotics. Amoxicillin (AMOXI), ampicillin (AMPI) and cephalexin (CEPHA) were analyzed using a system with a very simple design and very low-cost equipment consisting of a multisyringe module, three low-pressure solenoid valves, a monolithic Chromolith Flash RP-18e column and a diode array spectrophotometric detector monitoring at 250 nm. Mobile phases containing methanol:acetic acid (0.1 M)-sodium acetate (0.1 M), pH 6.2, were tested for various ratios of methanol:acetic acid-sodium acetate, but a ratio of 10:90 gave optimum results with a flow rate of 2 ml min(-1). Validation parameters were evaluated for amoxicillin. The response to amoxicillin was linear over the range 0.04-0.4 mg/mL, with a correlation coefficient of 0.9996; precisions, evaluated as the repeatability for 0.04, 0.16 and 0.4 mg/mL amoxicillin, were 0.6%, 0.1% and 0.6%, respectively. Recovery from a generic formulation of amoxicillin was evaluated. The method showed selectivity in the presence of excipients commonly used in capsules, and satisfactory specificity was observed for amoxicillin and hydrolytic degradation products. The linearity was also evaluated for cephalexin and ampicillin. The conditions selected for MSC separation were compared with those for a HPLC system, and similar results were obtained in terms of chromatographic parameters but a difference in retention times was observed.     

Identification of dimer impurities in ampicillin and amoxicillin by capillary LC and tandem mass spectrometry

A micro-scale liquid chromatography electrospray ionization tandem mass spectrometric method was developed for the identification of polymerized impurities in ampicillin and amoxicillin in aqueous solution. Ampicillin and amoxicillin are broad-spectrum antibiotics and widely used for the treatment of human and animal infections. In this study ampicillin, amoxicillin, and their dimers were trapped in a 5-cm capillary column containing C18 sorbents. The analytes were separated on a reversed-phase column and introduced into the mass spectrometer via a nanospray ion source. An isocratic mobile phase consisting of 1% formic acid-acetonitrile (50:50, v/v) was used. For identification, the fragment ions of the analytes were monitored. The aim of the present study was to develop an optimized quality control method for the analysis of high molecular weight impurities of ampicillin and amoxicillin.     

Development and validation of a NANOGold™ immunoassay for the detection of vascular endothelial growth factor (VEGF) in human serum using inductively coupled plasma mass spectrometry

This work aimed to develop and validate a NANOGold? based assay, quantified using inductively coupled plasma mass spectrometry (ICP‐MS), for the detection of human vascular endothelial growth factor (hVEGF) in serum. The initial assay range based on calibration standards was 62.5–2000 pg/mL with a detection limit of approximately 30 pg/mL. After validation using spiked validation controls, a quantification range between 175 and 1928 pg/mL was obtained. The inter‐assay precision was between 2.3 and 18.9% with accuracy between ?8.8 and ?3.1%. Additional performance parameters, including dilutional linearity, matrix specificity and time‐factored drift, were within ±20%, as defined by the validation acceptance criteria for the validation of macromolecule immunoassays used within our clinical environment. Serum samples from healthy donors were analysed to determine the endogenous levels of VEGF present; these ranged from 164 to 580 pg/mL with a mean of 273 pg/mL. The intra‐ and inter‐assay precision obtained from the healthy donor samples were 1.3–10.7% and 4.2–17.5%, respectively. This demonstration of a validated immunoassay opens further possibilities, utilising the simultaneous detection capabilities of ICP‐MS for the detection of multiple analytes in a single validated immunoassay, for routine use within a clinical environment. Copyright © 2010 John Wiley & Sons, Ltd.     

Confirmatory determination of six penicillins in honey by liquid chromatography/electrospray ionization-tandem mass spectrometry

A confirmatory method for 6 penicillin antibiotics (amoxicillin, ampicillin, penicillin G, oxacillin, cloxacillin, and dicloxacillin) in honey is presented that allows determination and confirmation of identity of the antibiotics at trace levels. The method includes the use of a stable isotope-labeled internal standard benzyl (d7-phenyl) penicillate and removal of sugar and other substances by solvent and solid-phase extraction. The honey extracts are then analyzed for penicillin residues by liquid chromatography/electrospray ionization-tandem mass spectrometry. Mass spectral acquisition was achieved in an electrospray positive ion mode by applying multiple reaction monitoring of 2 or 3 fragment ion transitions to provide a high degree of sensitivity and specificity. Typical recoveries of 6 penicillins at fortification levels of 6, 16, 40, and 80 microg/kg ranged from 51.4 to 132.9%. The recoveries varied with the individual penicillins and were affected by different honey matrixes. The ion ratios were consistent and could be used for confirmation of identity of the penicillins. The method limits of detection (microg/kg) were 0.25 for amoxicillin, 0.19 for ampicillin, 0.068 for penicillin G, 0.028 for oxacillin, 0.052 for cloxacillin, and 0.085 for dicloxacillin. The method limits of confirmation (microg/kg) were 0.44 for amoxicillin, 0.52 for ampicillin, 0.23 for penicillin G, 0.14 for oxacillin, 0.14 for cloxacillin, and 0.15 for dicloxacillin when a sample size of 5 g honey was used.     

固相萃取-胶束电动色谱法测定牛奶中的4种β-内酰胺类抗生素

建立了同时分离检测牛奶中的氨苄西林、阿莫西林、青霉素V和头孢氨苄4种β-内酰胺类抗生素的固相萃取-胶束电动色谱法。牛奶样品经沉淀蛋白后,采用HLB固相萃取柱净化浓缩;以含十二烷基硫酸钠(SDS)的磷酸盐为缓冲液,胶束电动色谱分离,210 nm波长下检测。分离电压为18 kV,于9 min内达到基线分离。各组分在0.5～20 mg/L范围内呈良好的线性关系,相关系数(r2)为0.9943～0.9976;检出限为0.16～0.20 mg/L;除了阿莫西林外,回收率均大于70%。该方法准确可靠,重复性好,灵敏度高,可以用于牛奶中β-内酰胺类抗生素的定量检测。     

Post-column reaction detection of biotin in human plasma ultrafiltrate based on laser-induced fluorescence energy transfer in the far-red spectral region

High performance liquid chromatography followed by post-column reaction detection in the far-red spectral region provides added sensitivity and selectivity. A homogeneous fluorescence energy transfer assay in the competitive mode based on the binding of biotin and streptavidin was developed as an on-line post-column reaction detection system. The labels used for energy transfer were R-Phycoerythrin conjugated to biotin and Cyanine 5 labeled with streptavidin. The energy transfer peak was measured at 670 nm and excitation was achieved using the 488 nm line of an argon ion laser. The biotin concentration in plasma ultrafiltrate ranged from 0.024 to 6.12 ng/mL (n = 6). The precision of the two controls, 0.24 and 2. 44 ng/mL, was found to be 18.70% and 9.92% relative standard deviation respectively. Accuracy was 10.47% and 1.95% difference from spiked, respectively (n = 6). The limit of detection was 21.70 pg/mL (8.90 x 10(-11)M) calculated based on a factor of 2x the standard deviation of the blank (n = 6). The correlation coefficient for the calibration curve was found to be 0.9995. Recovery from plasma ultrafiltrate at 2.44 ng/mL was 103.40% (n = 6). Detection selectivity was indicated by the absence of background fluorescence in six different plasma samples collected from six individual donors. Endogenous levels were detected in two of the six pools of plasma ultrafiltrates.     

Determination of some frequently used antibiotics in waste waters using solid phase extraction followed by high performance liquid chromatography with diode array and mass spectrometry detection

This study is focused on the determination of some important antibiotics from different classes in waste water samples using solid phase extraction followed by high performance liquid chromatography with two detectors, diode array and mass spectrometer in positive ionisation mode. The investigated antibiotics include three penicillins (amoxicillin, ampicillin, penicillin G), two cephalosporins (ceftazidime, ceftriaxone), and two tetracyclines (tetracycline, doxycycline). The studied antibiotics were extracted from waste water samples using hydrophilic-lipophilic balanced cartridges. The extraction of antibiotics from water matrices was tested at several pH values. The best recoveries were obtained at pH 3 and 7 respectively. Depending on the nature of antibiotic, the limits of detection and quantification were obtained in the range of 0.07–0.92 µg mL^?1 and 0.21–2.77 µg mL^?1 respectively. Influent and effluent waste water samples were collected from a Waste Water Treatment Plant from Romania in order to detect the studied antibiotics. The antibiotics detected in the influent waste water samples were ceftriaxone (334 µg L^?1), tetracycline (146 µg L^?1) and doxycycline (110 µg L^?1). In effluent waste water samples no target antibiotics were detected.      

Charm Safe-Level beta-Lactam Test for amoxicillin, ampicillin, ceftiofur, cephapirin, and penicillin G in raw commingled milk

The Charm Safe-Level beta-Lactam Test was evaluated by a U.S. Food and Drug Administration (FDA) test protocol administered by the AOAC-Research Institute. The sensitivity and selectivity of the test were evaluated with >800 negative raw commingled and drug-fortified milk samples by the manufacturer and an independent laboratory. Probit analysis by the independent laboratory determined the following 90% positive levels with 95% confidence: amoxicillin, 5.6 ppb; ampicillin, 8.5 ppb; cephapirin, 13.7 ppb; ceftiofur, 46.2 ppb; and penicillin G, 3.6 ppb. These values were within a range of +/- 20% of the manufacturer's data. Selection of negative samples met confidence specifications. Ruggedness parameters were studied and defined, and the stability of frozen milk was verified. There were no interferences from somatic cells (1,000,000 somatic cell count/mL) or bacteria (300,000 colony-forming units/mL), or from 27 other non-beta-lactam animal drugs. Test performance with raw milk samples containing incurred penicillin, ampicillin, and amoxicillin was consistent with the dose responses determined with fortified milk samples. Incurred cephalosporin in raw milk samples was detected at lower levels than was cephalosporin in fortified milk samples, presumably because of the presence of metabolite, as verified by other test methods. Quality control data support consistency in manufacture between batches and the stability of refrigerated test reagents for up to 1 year. Successful fulfillment of these criteria led to FDA certification of the test when used with a reader in U.S. milk testing programs.     

Sensitive monitoring of penicillin antibiotics in milk and honey treated by stir bar sorptive extraction based on monolith and LC‐electrospray MS detection

In the present study, a convenient and sensitive method for determination of six penicillin antibiotics (amoxicillin, ampicillin, penicillin G, oxacillin, cloxacillin, and dicloxacillin) in milk and honey samples was developed. Milk and honey samples were diluted with water, then directly treated by stir bar sorptive extraction based on poly (vinylimidazole‐divinylbenzene) monolithic material as coating. The analytes were analyzed by LC/ESI‐ MS/MS. Several extraction parameters including extraction and desorption time, pH value, and ionic strength in sample matrix were investigated in detail. Under the optimized extraction conditions, the calculated detection limits for the target compounds were as low as 0.23–2.66 ng/kg in milk and 0.18–1.42 ng/kg in honey, respectively. Good linearity was obtained for analytes with the correlation coefficients (R²) above 0.997. Excellent method reproducibility was achieved in terms of intraday and interday precisions, indicated by the RSDs of <5.0 and <10.0%, respectively. Finally, the proposed method was successfully applied to the determination of penicillin antibiotics residues in different milk and honey samples.     

Quantification of tizanidine in human plasma by liquid chromatography coupled to tandem mass spectrometry

A simple, sensitive and rapid high-performance liquid chromatography/positive ion electrospray tandem mass spectrometry (MS/MS) method was developed and validated for the assay of tizanidine in human plasma. Following liquid-liquid extraction, the analytes were separated using an isocratic mobile phase on a reversed-phase column and analyzed by MS/MS in the selected reaction monitoring mode. The assay exhibited a linear dynamic range of 50-5000 pg/mL for tizanidine in human plasma. The lower limit of quantification was 50 pg/mL with a relative standard deviation of less than 13%. Acceptable precision and accuracy were obtained for concentrations over the standard curve range. A run time of 2.5 min for each sample made it possible to analyze more than 300 human plasma samples per day. The validated method has been successfully used to analyze human plasma samples for application in pharmacokinetic, bioavailability or bioequivalence studies.     

Flow injection chemiluminescence analysis of some penicillins by their sensitizing effect on the potassium permanganate-glyoxal reaction.

A new chemiluminescence method using flow injection is described for the determination of four penicillins, namely: phenoxymethylpenicillin potassium, amoxicillin, ampicillin, and ampicillin sodium. The method is based on sensitizing effect of these drugs on the chemiluminescence reaction of potassium permanganate in sulfuric acid with glyoxal. The different experimental parameters affecting the chemiluminescence intensity were carefully studied and incorporated into the procedure. The method allows the determination of 0.1-1.0 microg/ml phenoxymethylpenicillin potassium, 0.1-1.0 microg/ml amoxicillin, 0.1-1.0 microg/ml ampicillin, and 0.1-1.0 microg/ml ampicillin sodium. The method was successfully applied to the determination of four penicillin antibiotics in pharmaceutical preparations.     

Large-volume sample stacking for the analysis of seven beta-lactam antibiotics in milk samples of different origins by CZE

A method for the simultaneous determination of eight beta-lactam antibiotics (nafcillin, cloxacillin, oxacillin, dicloxacillin, ampicillin, amoxicillin, and penicillin G) in fortified milk samples of different origins has been proposed by using CZE with diode-array detection (CZE-DAD). Optimum separation was obtained on a 64.5 cm x 75 microm bubble cell capillary using 175 mM Tris buffer with 20% ethanol at pH 8.0. Methylparaben has been used as an internal standard (IS). Taking into account the lack of sensitivity of the UV-Vis detection, a solvent extraction/SPE method was applied for off-line preconcentration and sample cleanup, and also an on-line preconcentration methodology, such as large-volume sample stacking (LVSS) with polarity switching, was developed, providing LODs ranging from 2 to 10 microg/L. The method permits the quantification of these residues below the levels established in milk by the EU Regulation. Satisfactory recoveries ranging from 86 to 93% were also obtained in milk samples of different origins.     

A new chemically amplified electrochemical system for the detection of biological affinity reactions: direct and competitive biotin assay

Quantitation of biological affinity reactions by a newly developed chemically amplified electrochemical detection method was demonstrated with the biotin-avidin binding pair. In the method, ruthenium tris(2,2'-bipyridine)(Ru-bipy) was used as an electrochemical signal-generating tag. Its oxidation current on an indium tin oxide (ITO) electrode was amplified with a sacrificial electron donor, oxalate. Because oxalate itself produced negligible current on the electrode, the signal-to-background ratio was greatly enhanced in comparison with other chemical amplification systems. Although the Ru-bipy/oxalate redox couple has been employed previously in electrochemiluminescent and photoelectrochemical detection, its use in a catalytic amperometric detection of biological binding assays has not been reported. To implement the method in the detection of biotin-avidin recognition, avidin was immobilized on an ITO electrode, and was reacted with biotin in solution. Immobilization of avidin by passive adsorption was found to be relatively stable under the condition of the affinity reaction. In the direct assay, biotin labelled with Ru-bipy was recognized by avidin and accumulated on the electrode surface, which was then detected electrochemically in the presence of oxalate. A linear relationship between electrochemical current and biotin concentration was obtained in the range of 1-300 ng mL(-1). In the competitive assay, a mixed solution of unlabelled biotin (the analyte) of various concentrations and 100 ng mL(-1) labelled biotin was reacted with avidin on the surface. As the concentration of the unlabelled biotin increased, less labelled biotin bound to avidin, leading to a reduction in the electro-catalytical response of Ru-bipy. A detection limit of 1 ng mL(-1) biotin was obtained in the competitive assay, which is close to the sensitivity of some enzyme-labelled amperometric assays.