Engineering Active Sites of Polyaniline for AlCl2+ Storage in an Aluminum-Ion Battery

The reversible capacity of AlCl₄⁻ intercalation/de-intercalation in conventional cathodes of aluminum-ion batteries (AIBs) is difficult to improve due to the large size of AlCl₄⁻ anions. Therefore, it is highly desirable to realize the intercalation/de-intercalation of smaller Al-based ions. Here, we fabricated polyaniline/single-walled carbon nanotubes (PANI/SWCNTs) composite films and protonated the PANI nanorods. The protonation endows PANI with more active sites and enhanced conductivity. Hyper self-protonated PANI (PANI(H⁺)) exhibits reversible AlCl₂⁺ intercalation/de-intercalation during the discharge/charge process. As a result, the discharge capacity of the Al/PANI(H⁺) battery is twice as high as that of the initial composite films. PANI(H⁺)@SWCNT electrodes also have a stable cycling life with only 0.003 % capacity decay per cycle over 8000 cycles. Owing to the excellent mechanical properties, PANI(H⁺)@SWCNT composite films can act as the electrodes of flexible AIBs.     

A Self‐Healing Aqueous Lithium‐Ion Battery

Flexible lithium‐ion batteries are critical for the next‐generation electronics. However, during the practical application, they may break under deformations such as twisting and cutting, causing their failure to work or even serious safety problems. A new family of all‐solid‐state and flexible aqueous lithium ion batteries that can self‐heal after breaking has been created by designing aligned carbon nanotube sheets loaded with LiMn₂O₄ and LiTi₂(PO₄)₃ nanoparticles on a self‐healing polymer substrate as electrodes, and a new kind of lithium sulfate/sodium carboxymethylcellulose serves as both gel electrolyte and separator. The specific capacity, rate capability, and cycling performance can be well maintained after repeated cutting and self‐healing. These self‐healing batteries are demonstrated to be promising for wearable devices.     

An All‐Solid‐State Fiber‐Shaped Aluminum–Air Battery with Flexibility,Stretchability, and High Electrochemical Performance

Owing to the high theoretical energy density of metal–air batteries, the aluminum–air battery has been proposed as a promising long‐term power supply for electronics. However, the available energy density from the aluminum–air battery is far from that anticipated and is limited by current electrode materials. Herein we described the creation of a new family of all‐solid‐state fiber‐shaped aluminum–air batteries with a specific capacity of 935 mAh g^?1 and an energy density of 1168 Wh kg^?1. The synthesis of an electrode composed of cross‐stacked aligned carbon‐nanotube/silver‐nanoparticle sheets contributes to the remarkable electrochemical performance. The fiber shape also provides the aluminum–air batteries with unique advantages; for example, they are flexible and stretchable and can be woven into a variety of textiles for large‐scale applications.     

Flexible and Stretchable Lithium‐Ion Batteries and Supercapacitors Based on Electrically Conducting Carbon Nanotube Fiber Springs

The construction of lightweight, flexible and stretchable power systems for modern electronic devices without using elastic polymer substrates is critical but remains challenging. We have developed a new and general strategy to produce both freestanding, stretchable, and flexible supercapacitors and lithium‐ion batteries with remarkable electrochemical properties by designing novel carbon nanotube fiber springs as electrodes. These springlike electrodes can be stretched by over 300 %. In addition, the supercapacitors and lithium‐ion batteries have a flexible fiber shape that enables promising applications in electronic textiles.     

Porous Nitrogen‐Doped Carbon Nanotubes Derived from Tubular Polypyrrole for Energy‐Storage Applications

Porous nitrogen‐doped carbon nanotubes (PNCNTs) with a high specific surface area (1765 m² g^?1) and a large pore volume (1.28 cm³ g^?1) have been synthesized from a tubular polypyrrole (T‐PPY). The inner diameter and wall thickness of the PNCNTs are about 55 nm and 22 nm, respectively. This material shows extremely promising properties for both supercapacitors and for encapsulating sulfur as a superior cathode material for high‐performance lithium–sulfur (Li‐S) batteries. At a current density of 0.5 A g^?1, PNCNT presents a high specific capacitance of 210 F g^?1, as well as excellent cycling stability at a current density of 2 A g^?1. When the S/PNCNT composite was tested as the cathode material for Li‐S batteries, the initial discharge capacity was 1341 mAh g^?1 at a current rate of 1 C and, even after 50 cycles at the same rate, the high reversible capacity was retained at 933 mAh g^?1. The promising electrochemical energy‐storage performance of the PNCNTs can be attributed to their excellent conductivity, large surface area, nitrogen doping, and unique pore‐size distribution.     

Multiple Active Sites: Lithium Storage Mechanism of Cu‐TCNQ as an Anode Material for Lithium‐Ion Batteries

Recently, carboxylate metal‐organic framework (MOF) materials were reported to perform well as anode materials for lithium‐ion batteries (LIBs); however, the presumed lithium storage mechanism of MOFs is controversial. To gain insight into the mechanism of MOFs as anode materials for LIBs, a self‐supported Cu‐TCNQ (TCNQ: 7,7,8,8‐tetracyanoquinodimethane) film was fabricated via an in situ redox routine, and directly used as electrode for LIBs. The first discharge and charge specific capacities of the self‐supported Cu‐TCNQ electrode are 373.4 and 219.4 mAh g^?1, respectively. After 500 cycles, the reversible specific capacity of Cu‐TCNQ reaches 280.9 mAh g^?1 at a current density of 100 mA g^?1. Mutually validated data reveal that the high capacity is ascribed to the multiple‐electron redox conversion of both metal ions and ligands, as well as the reversible insertion and desertion of Li⁺ ions into the benzene rings of ligands. This work raises the expectation for MOFs as electrode materials of LIBs by utilizing multiple active sites and provides new clues for designing improved electrode materials for LIBs.     

Elastic and Wearable Wire‐Shaped Lithium‐Ion Battery with High Electrochemical Performance

A stretchable wire‐shaped lithium‐ion battery is produced from two aligned multi‐walled carbon nanotube/lithium oxide composite yarns as the anode and cathode without extra current collectors and binders. The two composite yarns can be well paired to obtain a safe battery with superior electrochemical properties, such as energy densities of 27 Wh kg^?1 or 17.7 mWh cm^?3 and power densities of 880 W kg^?1 or 0.56 W cm^?3, which are an order of magnitude higher than the densities reported for lithium thin‐film batteries. These wire‐shaped batteries are flexible and light, and 97 % of their capacity was maintained after 1000 bending cycles. They are also very elastic as they are based on a modified spring structure, and 84 % of the capacity was maintained after stretching for 200 cycles at a strain of 100 %. Furthermore, these novel wire‐shaped batteries have been woven into lightweight, flexible, and stretchable battery textiles, which reveals possible large‐scale applications.     

A Full Flexible NH4+ Ion Battery Based on the Concentrated Hydrogel Electrolyte for Enhanced Performance

Non-metal ammonium ( ) ions have recently been explored as effective charge carriers in battery systems due to their abundancy, light weight, small hydration shells in water. The research concerning the use of redox chemistry in batteries, particularly in flexible batteries, is still in its infancy. For the first time, we report a flexible full ion battery (AIB) composed of a concentrated hydrogel electrolyte sandwiched between NH₄V₃O₈ ⋅ 2.9H₂O nanobelts cathode and polyaniline (PANI) anode, for enhanced performance. The hydrogel electrolyte is simply synthesized by using ammonium sulfate, xanthan gum and water. As a reference, the AIB based on the liquid aqueous electrolyte is prepared first, which exhibits a capacity of 121 mAh g⁻¹ and a capacity retention of 95 % after 400 cycles at a specific current of 0.1 A g⁻¹. On the other hand, the simple synthesis of the hydrogel electrolyte allows us to facilely tune and optimize the salt contents in the electrolyte, to maximize the ionic conductivity, transport kinetics, mechanical characteristics, and consequently the battery performance. It is found that the flexible battery based on the hydrogel electrolyte prepared from 3 M ammonium sulfate solution shows the best electrochemical performance, i. e., a capacity of 60 mAh g⁻¹ while maintaining a capacity retention of 88 % after 250 cycles at a specific current of 0.1 A g⁻¹. Moreover, the flexible AIB retains excellent electrochemical performance when bent at different angles, demonstrating remarkable mechanical strength and flexibility. Therefore, this study sheds new light on the utilization of concentrated hydrogel electrolyte in the AIB chemistry, for developments of novel electrochemical energy storage technology with high safety and low cost.     

A Deep‐Cycle Aqueous Zinc‐Ion Battery Containing an Oxygen‐Deficient Vanadium Oxide Cathode

Rechargeable aqueous zinc‐ion batteries are attractive because of their inherent safety, low cost, and high energy density. However, viable cathode materials (such as vanadium oxides) suffer from strong Coulombic ion–lattice interactions with divalent Zn²⁺, thereby limiting stability when cycled at a high charge/discharge depth with high capacity. A synthetic strategy is reported for an oxygen‐deficient vanadium oxide cathode in which facilitated Zn²⁺ reaction kinetic enhance capacity and Zn²⁺ pathways for high reversibility. The benefits for the robust cathode are evident in its performance metrics; the aqueous Zn battery shows an unprecedented stability over 200 cycles with a high specific capacity of approximately 400 mAh g^?1, achieving 95 % utilization of its theoretical capacity, and a long cycle life up to 2 000 cycles at a high cathode utilization efficiency of 67 %. This work opens up a new avenue for synthesis of novel cathode materials with an oxygen‐deficient structure for use in advanced batteries.     

Robust SnO2−x Nanoparticle‐Impregnated Carbon Nanofibers with Outstanding Electrochemical Performance for Advanced Sodium‐Ion Batteries

The sluggish sodium reaction kinetics, unstable Sn/Na₂O interface, and large volume expansion are major obstacles that impede practical applications of SnO₂‐based electrodes for sodium‐ion batteries (SIBs). Herein, we report the crafting of homogeneously confined oxygen‐vacancy‐containing SnO_2?x nanoparticles with well‐defined void space in porous carbon nanofibers (denoted SnO_2?x/C composites) that address the issues noted above for advanced SIBs. Notably, SnO_2?x/C composites can be readily exploited as the working electrode, without need for binders and conductive additives. In contrast to past work, SnO_2?x/C composites‐based SIBs show remarkable electrochemical performance, offering high reversible capacity, ultralong cyclic stability, and excellent rate capability. A discharge capacity of 565 mAh g^?1 at 1 A g^?1 is retained after 2000 cycles.     

Flexible Aqueous Lithium‐Ion Battery with High Safety and Large Volumetric Energy Density

A flexible and wearable aqueous lithium‐ion battery is introduced based on spinel Li_1.1Mn₂O₄ cathode and a carbon‐coated NASICON‐type LiTi₂(PO₄)₃ anode (NASICON=sodium‐ion super ionic conductor). Energy densities of 63 Wh kg^?1 or 124 mWh cm^?3 and power densities of 3 275 W kg^?1 or 11.1 W cm^?3 can be obtained, which are seven times larger than the largest reported till now. The full cell can keep its capacity without significant loss under different bending states, which shows excellent flexibility. Furthermore, two such flexible cells in series with an operation voltage of 4 V can be compatible with current nonaqueous Li‐ion batteries. Therefore, such a flexible cell can potentially be put into practical applications for wearable electronics. In addition, a self‐chargeable unit is realized by integrating a single flexible aqueous Li‐ion battery with a commercial flexible solar cell, which may facilitate the long‐time outdoor operation of flexible and wearable electronic devices.     

High‐Capacity Anode Materials for Sodium‐Ion Batteries

Na‐ion batteries are an attractive alternative to Li‐ion batteries for large‐scale energy storage systems because of their low cost and the abundant Na resources. This Review provides a comprehensive overview of selected anode materials with high reversible capacities that can increase the energy density of Na‐ion batteries. Moreover, we discuss the reaction and failure mechanisms of those anode materials with a view to suggesting promising strategies for improving their electrochemical performance.     

Evaluating the Free Energies of Solvation and Electronic Structures of Lithium‐Ion Battery Electrolytes

Adaptive biasing force molecular dynamics simulations and density functional theory calculations were performed to understand the interaction of Li⁺ with pure carbonates and ethylene carbonate (EC)‐based binary mixtures. The most favorable Li carbonate cluster configurations obtained from molecular dynamics simulations were subjected to detailed structural and thermochemistry calculations on the basis of the M06‐2X/6‐311++G(d,p) level of theory. We report the ranking of these electrolytes on the basis of the free energies of Li‐ion solvation in carbonates and EC‐based mixtures. A strong local tetrahedral order involving four carbonates around the Li⁺ was seen in the first solvation shell. Thermochemistry calculations revealed that the enthalpy of solvation and the Gibbs free energy of solvation of the Li⁺ ion with carbonates are negative and suggested the ion–carbonate complexation process to be exothermic and spontaneous. Natural bond orbital analysis indicated that Li⁺ interacts with the lone pairs of electrons on the carbonyl oxygen atom in the primary solvation sphere. These interactions lead to an increase in the carbonyl (C=O) bond lengths, as evidenced by a redshift in the vibrational frequencies [ν(C=O)] and a decrease in the electron density values at the C=O bond critical points in the primary solvation sphere. Quantum theory of atoms in molecules, localized molecular orbital energy decomposition analysis (LMO‐EDA), and noncovalent interaction plots revealed the electrostatic nature of the Li⁺ ion interactions with the carbonyl oxygen atoms in these complexes. On the basis of LMO‐EDA, the strongest attractive interaction in these complexes was found to be the electrostatic interaction followed by polarization, dispersion, and exchange interactions. Overall, our calculations predicted EC and a binary mixture of EC/dimethyl carbonate to be appropriate electrolytes for Li‐ion batteries, which complies with experiments and other theoretical results.     

钠离子储能电池关键材料

钠离子电池是一种新型电化学电源,具有原材料资源丰富、成本较低、比容量和效率较高等优点,较为符合规模化储能应用要求,在提升大规模可再生能源并网接入能力、提高电能使用效率和电能质量方面具有应用潜力。在这一背景下,钠离子电池近年来引起全世界范围内的广泛关注,关键材料和相关技术研究进展迅速。本文从钠离子电池的负极材料和正极材料两方面对近年来的主要研究工作进行综述,同时简略介绍了与之匹配的电解质体系的研究进展,讨论了当前面临的主要技术关键点和难点,并尝试对我国科研和产业工作者在该领域的研究工作提出一些建议。     

Microwave Synthesized In2S3@CNTs with Excellent Properties inLithium‐Ion Battery and Electromagnetic Wave Absorption

The three‐dimensional nanoflower‐like β‐In₂S₃ composited with carbon nanotubes (CNTs) has been synthesized by a single mode microwave‐assisted hydrothermal technique. The In₂S₃ and CNTs nanocomposites (In₂S₃@CNTs) were investigated as the anode materials of lithium batteries (LIBs) and the electromagnetic wave absorption materials. For LIBs applications, the In₂S₃@CNTs nanocomposite exhibited excellent cycling stability with a high reversible charge capacity of 575 mA⋅h⋅g^–1 after 300 cycles at 0.5 A⋅g^–1. In addition, the In₂S₃@CNTs used as electromagnetic wave absorber displayed a maximum reflection loss of –42.75 dB at 11.96 GHz with a thickness of 1.55 mm.     

A Site‐Selective Doping Strategy of Carbon Anodes with Remarkable K‐Ion Storage Capacity

The limited potassium‐ion intercalation capacity of graphite hampers development of potassium‐ion batteries (PIB). Edge‐nitrogen doping is an effective approach to enhance K‐ion storage in carbonaceous materials. One shortcoming is the lack of precise control over producing the edge‐nitrogen configuration. Here, a molecular‐scale copolymer pyrolysis strategy is used to precisely control edge‐nitrogen doping in carbonaceous materials. This process results in defect‐rich, edge‐nitrogen doped carbons (ENDC) with a high nitrogen‐doping level (up to 10.5 at %) and a high edge‐nitrogen ratio (87.6 %). The optimized ENDC exhibits a high reversible capacity of 423 mAh g^?1, a high initial Coulombic efficiency of 65 %, superior rate capability, and long cycle life (93.8 % retention after three months). This strategy can be extended to design other edge‐heteroatom‐rich carbons through pyrolysis of copolymers for efficient storage of various mobile ions.     

Thermal‐Gated Polymer Electrolytes for Smart Zinc‐Ion Batteries

Smart self‐protection is essential for addressing safety issues of energy‐storage devices. However, conventional strategies based on sol‐gel transition electrolytes often suffer from unstable self‐recovery performance. Herein, smart separators based on thermal‐gated poly(N‐isopropylacrylamide) (PNIPAM) hydrogel electrolytes were developed for rechargeable zinc‐ion batteries (ZIBs). Such PNIPAM‐based separators not only display a pore structure evolution from opened to closed states, but also exhibit a surface wettability transition from hydrophilic to hydrophobic behaviors when the temperature rises. This behavior can suppress the migration of electrolyte ions across the separators, realizing the self‐protection of ZIBs at high temperatures. Furthermore, the thermal‐gated behavior is highly reversible, even after multiple heating/cooling cycles, because of the reversibility of temperature‐dependent structural evolution and hydrophilic/hydrophobic transition. This work will pave the way for designing thermal‐responsive energy‐storage devices with safe and controlled energy delivery.     

One‐Step Solvothermal Synthesis of Single‐Crystalline TiOF2 Nanotubes with High Lithium‐Ion Battery Performance

Single‐crystalline TiOF₂ nanotubes were prepared by a one‐step solvothermal method. The nanotubes are rectangular in shape with a length of 2–3 μm, width of 200–300 nm, and wall thickness of 40–60 nm. The formation of TiOF₂ nanotubes is directly driven by the interaction between TiF₄ and oleic acid in octadecane to form the 1D nanorods, and this is followed by a mass diffusion process to form the hollow structures. The synthesis approach can be extended to grow TiOF₂ nanoparticles and nanorods. Compared with TiO₂, which is the more commonly considered anode material in lithium‐ion batteries, TiOF₂ has the advantages of a lower Li‐intercalation voltage (e.g., to help increase the total voltage of the battery cell) and higher specific capacities. The TiOF₂ nanotubes showed good Li‐storage properties with high specific capacities, stable cyclabilities, and good rate capabilities.