Engineering Platinum–Oxygen Dual Catalytic Sites via Charge Transfer towards Highly Efficient Hydrogen Evolution

A dual-site catalyst allows for a synergetic reaction in the close proximity to enhance catalysis. It is highly desirable to create dual-site interfaces in single-atom system to maximize the effect. Herein, we report a cation-deficient electrostatic anchorage route to fabricate an atomically dispersed platinum–titania catalyst (Pt₁^O1/Ti_1−xO₂), which shows greatly enhanced hydrogen evolution activity, surpassing that of the commercial Pt/C catalyst in mass by a factor of 53.2. Operando techniques and density functional calculations reveal that Pt₁^O1/Ti_1−xO₂ experiences a Pt−O dual-site catalytic pathway, where the inherent charge transfer within the dual sites encourages the jointly coupling protons and plays the key role during the Volmer–Tafel process. There is almost no decay in the activity of Pt₁^O1/Ti_1−xO₂ over 300 000 cycles, meaning 30 times of enhancement in stability compared to the commercial Pt/C catalysts (10 000 cycles).     

Engineering the Atomic Interface with Single Platinum Atoms for Enhanced Photocatalytic Hydrogen Production

It is highly desirable but challenging to optimize the structure of photocatalysts at the atomic scale to facilitate the separation of electron–hole pairs for enhanced performance. Now, a highly efficient photocatalyst is formed by assembling single Pt atoms on a defective TiO₂ support (Pt₁/def‐TiO₂). Apart from being proton reduction sites, single Pt atoms promote the neighboring TiO₂ units to generate surface oxygen vacancies and form a Pt‐O‐Ti³⁺ atomic interface. Experimental results and density functional theory calculations demonstrate that the Pt‐O‐Ti³⁺ atomic interface effectively facilitates photogenerated electrons to transfer from Ti³⁺ defective sites to single Pt atoms, thereby enhancing the separation of electron–hole pairs. This unique structure makes Pt₁/def‐TiO₂ exhibit a record‐level photocatalytic hydrogen production performance with an unexpectedly high turnover frequency of 51423 h^?1, exceeding the Pt nanoparticle supported TiO₂ catalyst by a factor of 591.     

Structural and Electronic Effects of Carbon‐Supported PtxPd1−x Nanoparticles on the Electrocatalytic Activity of the Oxygen‐Reduction Reaction and on Methanol Tolerance

We report a systematic investigation on the structural and electronic effects of carbon‐supported Pt_xPd_1?x bimetallic nanoparticles on the oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) in acid electrolyte. Pt_xPd_1?x/C nanocatalysts with various Pt/Pd atomic ratios (x=0.25, 0.5, and 0.75) were synthesized by using a borohydride‐reduction method. Rotating‐disk electrode measurements revealed that the Pt₃Pd₁/C nanocatalyst has a synergistic effect on the ORR, showing 50 % enhancement, and an antagonistic effect on the MOR, showing 90 % reduction, relative to JM 20 Pt/C on a mass basis. The extent of alloying and Pt d‐band vacancies of the Pt_xPd_1?x/C nanocatalysts were explored by extended X‐ray absorption fine‐structure spectroscopy (EXAFS) and X‐ray absorption near‐edge structure spectroscopy (XANES). The structure–activity relationship indicates that ORR activity and methanol tolerance of the nanocatalysts strongly depend on their extent of alloying and d‐band vacancies. The optimal composition for enhanced ORR activity is Pt₃Pd₁/C, with high extent of alloying and low Pt d‐band vacancies, owing to favorable O? O scission and inhibited formation of oxygenated intermediates. MOR activity also shows structure dependence. For example, Pt₁Pd₃/C with Pt_rich?corePd_rich?shell structure possesses lower MOR activity than the Pt₃Pd₁/C nanocatalyst with random alloy structure. Herein, extent of alloying and d‐band vacancies reveal new insights into the synergistic and antagonistic effects of the Pt_xPd_1?x/C nanocatalysts on surface reactivity.     

Electrocatalysis and redox behavior of Pt2+ ion in CeO2 and Ce0.85Ti0.15O2: XPS evidence of participation of lattice oxygen for high activity

Electronic states of CeO₂, Ce_1????em>x Pt _x O_2????em>δ , and Ce_{1????em>x????em>y} Ti _y Pt _x O_2????em>δ electrodes have been investigated by X-ray photoelectron spectroscopy as a function of applied potential for oxygen evolution and formic acid and methanol oxidation. Ionically dispersed platinum in Ce_1????em>x Pt _x O_2????em>δ and Ce_{1????em>x????em>y} Ti _y Pt _x O_2????em>δ is active toward these reactions compared with CeO₂ alone. Higher electrocatalytic activity of Pt²⁺ ions in CeO₂ and Ce_1????em>x Ti _x O₂ compared with the same amount of Pt⁰ in Pt/C is attributed to Pt²⁺ ion interaction with CeO₂ and Ce_1????em>x Ti _x O₂ to activate the lattice oxygen of the support oxide. Utilization of this activated lattice oxygen has been demonstrated in terms of high oxygen evolution in acid medium with these catalysts. Further, ionic platinum in CeO₂ and Ce_1????em>x Ti _x O₂ does not suffer from CO poisoning effect unlike Pt⁰ in Pt/C due to participation of activated lattice oxygen which oxidizes the intermediate CO to CO₂. Hence, higher activity is observed toward formic acid and methanol oxidation compared with same amount of Pt metal in Pt/C.     

Activation of Elemental Sulfur at a Two‐Coordinate Platinum(0) Center

Platinum dichalcogenides have been known to exhibit two‐dimensional layered structures. Herein, we describe the syntheses, isolation, and characterization of air‐stable crystalline cyclic alkyl(amino) carbene (cAAC)‐supported monomeric platinum disulfide three‐membered ring complex [(cAAC)₂Pt(S₂)] ( 2 ). The highly reactive platinum(0) [(cAAC)₂Pt] complex ( 1 ) with two‐coordinate platinum activates elemental sulfur to give 2 . The brown crystals of bis‐carbene platinum(II)monosulfate [(cAAC)₂Pt(SO₄)_x(S₂)_1?x] ( 4 ) have been isolated when the reaction was performed in air. The dioxygen analogue of 2 was formed upon exposing the THF solution of 1 to aerial oxygen (O₂). The binding of oxygen at the Pt⁰ center was found to be reversible. Additionally, DFT study has been performed to elucidate the electronic structure and bonding scenario of 2 , 3 , and 4 . Quantum chemical calculations showed donor–acceptor‐type interaction for the Pt?S bonds in 2 and Pt?O bonds in 3 and 4 .     

Activated Single-Phase Ti4O7 Nanosheets with Efficient Use of Precious Metal for Inspired Oxygen Reduction Reaction

The oxygen reduction reaction (ORR) is central to modern energy storage and conversion technologies for grids such as fuel cells and electrolyzers, but challenges remain due to the lack of reliable, economic, and durable electrocatalysts. Here, we develop single-crystal conductive black titanium (Ti₄O₇) nanosheets (NSs) as a new precious metal carrier based on sacrificial hard templates and ultrasonic-assisted peeling, and deposit Pt clusters on Ti₄O₇ NSs induced by wetness impregnation under the irradiation of visible light (VI; 650 nm). Pt/Ti₄O₇ NSs provide Ti³⁺, Pt²⁺, and Pt⁰⁺ continuous active sites for the ORR multielectron process, achieving synergy among them. The assistance of visible light not only makes a more uniform and smaller distribution of Pt nanoclusters, but also strengthens the charge transfer, thereby constructing a strong metal-support interaction interface. VI−Pt/Ti₄O₇ NSs show superior initial oxidation potential and a mass activity of 1.61 A mg⁻¹_Pt at a E_1/2=0.91 V, which is nine times higher than that of commercial Pt/C. This work provides an effective strategy for achieving high-value applications of titanium sub-oxides and further explores the enhanced interface in metals Ti_nO_2n-1 by light radiation.     

Platinum‐Containing Polyoxometalates: syn‐ and anti‐[PtII2(α‐PW11O39)2]10− and Formation of the Metal–Metal‐Bonded di‐PtIII Derivatives

The first examples of dimeric, di‐Pt^II‐containing heteropolytungstates are reported. The two isomeric di‐platinum(II)‐containing 22‐tungsto‐2‐phosphates [anti‐Pt^II₂(α‐PW₁₁O₃₉)₂]^10? ( 1 a ) and [syn‐Pt^II₂(α‐PW₁₁O₃₉)₂]^10? ( 2 a ) were synthesized in aqueous pH 3.5 medium using one‐pot procedures. Polyanions 1 a and 2 a contain a core comprising two face‐on PtO₄ units, with a Pt???Pt distance of 2.9–3 Å. Both polyanions were investigated by single‐crystal XRD, IR, TGA, UV/Vis, ³¹P NMR, ESI‐MS, CID‐MS/MS, electrochemistry, and DFT. On the basis of DFT and electrochemistry, we demonstrated that the {Pt₂^II} moiety in 1 a and 2 a can undergo fully reversible two‐electron oxidation to {Pt₂^III}, accompanied by formation of a single Pt?Pt bond. Hence we have discovered the novel subclass of Pt^III‐containing heteropolytungstates.     

Relating the Composition of PtxRu100−x/C Nanoparticles to Their Structural Aspects and Electrocatalytic Activities in the Methanol Oxidation Reaction

A controlled composition‐based method—that is, the microwave‐assisted ethylene glycol (MEG) method—was successfully developed to prepare bimetallic Pt_xRu_100?x/C nanoparticles (NPs) with different alloy compositions. This study highlights the impact of the variation in alloy composition of Pt_xRu_100?x/C NPs on their alloying extent (structure) and subsequently their catalytic activity towards the methanol oxidation reaction (MOR). The alloying extent of these Pt_xRu_100?x/C NPs has a strong influence on their Pt d‐band vacancy and Pt electroactive surface area (Pt ECSA); this relationship was systematically evaluated by using X‐ray absorption (XAS), scanning electron microscopy (SEM) coupled with energy dispersive X‐ray spectroscopy (EDX), transmission electron microscopy (TEM), density functional theory (DFT) calculations, and electrochemical analyses. The MOR activity depends on two effects that act in cooperation, namely, the number of active Pt sites and their activity. Here the number of active Pt sites is associated with the Pt ECSA value, whereas the Pt‐site activity is associated with the alloying extent and Pt d‐band vacancy (electronic) effects. Among the Pt_xRu_100?x/C NPs with various Pt:Ru atomic ratios (x=25, 50, and 75), the Pt₇₅Ru₂₅/C NPs were shown to be superior in MOR activity on account of their favorable alloying extent, Pt d‐band vacancy, and Pt ECSA. This short study brings new insight into probing the synergistic effect on the surface reactivity of the Pt_xRu_100?x/C NPs, and possibly other bimetallic Pt‐based alloy NPs.     

Structural and Electrochemical Study of Vanadium‐Doped TiO2 Ramsdellite with Superior Lithium Storage Properties for Lithium‐Ion Batteries

Titanium‐oxide‐based materials are considered attractive and safe alternatives to carbonaceous anodes in Li‐ion batteries. In particular, the ramsdellite form TiO₂(R) is known for its superior lithium‐storage ability as the bulk material when compared with other titanates. In this work, we prepared V‐doped lithium titanate ramsdellites with the formula Li_0.5Ti_1?xV_xO₂ (0≤x≤0.5) by a conventional solid‐state reaction. The lithium‐free Ti_1?xV_xO₂ compounds, in which the ramsdellite framework remains virtually unaltered, are easily obtained by a simple aqueous oxidation/ion‐extraction process. Neutron powder diffraction is used to locate the Li channel site in Li_0.5Ti_1?xV_xO₂ compounds and to follow the lithium extraction by difference‐Fourier maps. Previously delithiated Ti_1?xV_xO₂ ramsdellites are able to insert up to 0.8 Li⁺ per transition‐metal atom. The initial gravimetric capacities of 270 mAh g^?1 with good cycle stability under constant current discharge conditions are among the highest reported for bulk TiO₂‐related intercalation compounds for the threshold of one e^? per formula unit.     

Sol-gel Synthesis and Electrochemical Performance of Li4-xMgxTi5-xZrxO12 Anode Material for Lithium-ion Batteries

The anode materials Li_4?xMg_xTi_5?xZr_xO₁₂ (x=0, 0.05, 0.1) were successfully synthesized by sol‐gel method using Ti(OC₄H₉)₄, CH₃COOLi·2H₂O, MgCl₂·6H₂O and Zr(NO₃)₃·6H₂O as raw materials. The crystalline structure, morphology and electrochemical properties of the as‐prepared materials were characterized by XRD, SEM, cyclic voltammograms (CV), electrochemical impedance spectroscopy (EIS) and charge‐discharge cycling tests. The results show that the lattice parameters of the Mg‐Zr doped samples are slightly larger than that of the pure Li₄Ti₅O₁₂, and Mg‐Zr doping does not change the basic Li₄Ti₅O₁₂ structure. The rate capability of Li_4?xMg_xTi_5?xZr_xO₁₂ (x=0.05, 0.1) electrodes is significantly improved due to the expansile Li⁺ diffusion channel and reduced charge transfer resistance. In this study, Li_3.95Mg_0.05Ti_4.95Zr_0.05O₁₂ represented a relatively good rate capability and cycling stability, after 400 cycles at 10 C, the discharge capacity retained as 134.74 mAh·g^?1 with capacity retention close to 100%. The excellent rate capability and good cycling performance make Li_3.95Mg_0.05Ti_4.95Zr_0.05O₁₂ a promising anode material in lithium‐ion batteries.     

An Alkyne‐Appended,Click‐Ready PtII Complex with an Unusual Arrangement in the Solid State

To better understand the range of cellular interactions of Pt^II‐based chemotherapeutics, robust and efficient methods to track and analyze Pt targets are needed. A powerful approach is to functionalize Pt^II compounds with alkyne or azide moieties for post‐treatment conjugation through the azide–alkyne cycloaddition (click) reaction. Herein, we report an alkyne‐appended cis‐diamine Pt^II compound, cis‐[Pt(2‐(5‐hexynyl)amido‐1,3‐propanediamine)Cl₂] ( 1 ), the X‐ray crystal structure of which exhibits a combination of unusual radially distributed CH/π(C?C) interactions, Pt? Pt bonding, and NH:O/NH:Cl hydrogen bonds. In solution, 1 exhibits no Pt? alkyne interactions and binds readily to DNA. Subsequent click reactivity with nonfluorescent dansyl azide results in a 70‐fold fluorescence increase. This result demonstrates the potential for this new class of alkyne‐modified Pt compound for the comprehensive detection and isolation of Pt‐bound biomolecules.     

Chemically dealloyed Pt–Au–Cu ternary electrocatalysts with enhanced stability in electrochemical oxygen reduction

We report simple synthesis of ternary Pt–Au–Cu catalysts consisting of active Pt-rich shell and Pt transition-metal alloy core for use as highly active and durable electrocatalysts in oxygen reduction reactions. The ternary Pt–Au–Cu catalysts were synthesized by chemical coreduction followed by thermal treatment and chemical dealloying. During synthesis, thermal treatment formed metal particles into high-degree alloys, and chemical dealloying led to selective dissolution of soluble Cu species from the outer surface layer of the thermally treated alloy particles, resulting in Pt-based alloys@Pt-rich surface core–shell configuration. Compared with a commercial Pt/C catalyst, our Pt_1?xAu _x Cu₃/C-AT catalysts exhibited approximately 2.4-fold enhanced performance in oxygen reduction reactions. Among the catalysts employed in this work, Pt_0.97Au_0.3Cu₃/C-AT showed the highest performance in terms of mass activity, specific activity, and electrochemically active surface area loss with negligible change during 10,000 potential cycles. The synthesis details, electrochemical characteristics, oxygen reduction reaction performance, and durability of the chemically dealloyed ternary Pt–Au–Cu catalysts are presented and discussed.     

The Controlled Formation and Cleavage of an Intramolecular d8–d8 Pt–Pt Interaction in a Dinuclear Cycloplatinated Molecular “Pivot‐Hinge”

The bis(diphenylphosphino)methane (dppm)‐bridged dinuclear cycloplatinated complex {[Pt(L)]₂(μ‐dppm)}²⁺ (Pt₂ ? dppm; HL: 2‐phenyl‐6‐(1H‐pyrazol‐3‐yl)‐pyridine) demonstrates interesting reversible “pivot‐hinge”‐like intramolecular motions in response to the protonation/deprotonation of L. In its protonated “closed” configuration, the two platinum(II) centers are held in position by intramolecular d⁸–d⁸ Pt–Pt interaction. In its deprotonated “open” configuration, such Pt–Pt interaction is cleaved. To further understand the mechanism behind this hingelike motion, an analogous dinuclear cycloplatinated complex, {[Pt(L)]₂(μ‐dchpm)}²⁺ (Pt₂ ? dchpm) with bis(dicyclohexylphosphino)methane (dchpm) as the bridging ligand, was synthesized. From its protonation/deprotonation responses, it was revealed that aromatic π–π interactions between the phenyl moieties of the μ‐dppm and the deprotonated pyrazolyl rings of L was essential to the reversible cleavage of the intramolecular Pt–Pt interaction in Pt₂ ? dppm. In the case of Pt₂ ? dchpm, spectroscopic and spectrofluorometric titrations as well as X‐ray crystallography indicated that the distance between the two platinum(II) centers shrank upon deprotonation, thus causing a redshift in its room‐temperature triplet metal–metal‐to‐ligand charge‐transfer emission from 614 to 625 nm. Ab initio calculations revealed the presence of intramolecular hydrogen bonding between the deprotonated and negatively charged 1‐pyrazolyl‐N moiety and the methylene CH and phenyl C–H of the μ‐dppm. The “open” configuration of the deprotonated Pt₂ ? dppm was estimated to be 19 kcal mol^?1 more stable than its alternative “closed” configuration. On the other hand, the open configuration of the deprotonated Pt₂ ? dchpm was 6 kcal mol^?1 less stable than its alternative closed configuration.     

Ternary CoPtAu Nanoparticles as a General Catalyst for Highly Efficient Electro‐oxidation of Liquid Fuels

Efficient electro‐oxidation of formic acid, methanol, and ethanol is challenging owing to the multiple chemical reaction steps required to accomplish full oxidation to CO₂. Herein, a ternary CoPtAu nanoparticle catalyst system is reported in which Co and Pt form an intermetallic L1₀‐structure and Au segregates on the surface to alloy with Pt. The L1₀‐structure stabilizes Co and significantly enhances the catalysis of the PtAu surface towards electro‐oxidation of ethanol, methanol, and formic acid, with mass activities of 1.55 A/mg_Pt, 1.49 A/mg_Pt, and 11.97 A/mg_Pt, respectively in 0.1 m HClO₄. The L1₀‐CoPtAu catalyst is also stable, with negligible degradation in mass activities and no obvious Co/Pt/Au composition changes after 10 000 potential cycles. The in situ surface‐enhanced infrared absorption spectroscopy study indicates that the ternary catalyst activates the C?C bond more efficiently for ethanol oxidation.     

Reversible Electrocatalytic Activity of Carbon‐Supported PtxNi1−x in Hydrogen Reactions

Hydrogen oxidation and evolution reactions (HOR and HER) are studied on Pt_xNi_1?x/C materials synthesized by the bromide anion exchange method. Physicochemical characterization shows that this surfactant‐free method enables the preparation of well‐dispersed and effective catalysts for the processes involved in the anode of H₂/O₂ fuel cells (HOR) and the cathode of water electrolyzers (HER). The Pt‐based materials are modified with different Ni contents to decrease the amount of costly precious metal in the electrode materials. These modified Pt‐based materials are found to be electroactive for both reactions without additional overpotential. Kinetic parameters such as the Tafel slope, exchange (j₀) and kinetic current densities, and the rate‐determining steps of the reaction mechanisms are determined for each Pt–Ni catalyst and compared to those obtained at the Pt/C surface in alkaline medium. The high j₀ values that are obtained indicate a probable contribution of the surface structure of the catalysts due to their roughness and the presence of oxygenated Ni species even at low potentials.     

Magneli phase Ti n O2n − 1 as corrosion-resistant PEM fuel cell catalyst support

Magneli phase titanium suboxide, Ti _n O_{2n ? 1}, with Brunauer–Emmett–Teller surface area up to 25 m² g^?1 was prepared using the heat treatment of titanium oxide (rutile) mixed with polyvinyl alcohol in ratios from 1:3 to 3:1. XRD patterns showed Ti₄O₇ as the major phase formed during the heat treatment process. The Ti _n O_{2n ? 1} showed excellent electrochemical stability in the potential range of ?0.25 to 2.75 V vs. standard hydrogen electrode. The Ti _n O_{2n ? 1} was employed as a polymer electrolyte membrane fuel cell catalyst support to prepare 20 wt% platinum (Pt)/Ti _n O_{2n ? 1} catalyst. A fuel cell membrane electrode assembly was fabricated using the 20 wt% Pt/Ti _n O_{2n ? 1} catalyst, and its performance was evaluated using H₂/O₂ at 80 °C. A current density of 0.125 A?cm^?2 at 0.6 V was obtained at 80 °C.     

Pt/MOx(M=Ni,Fe,Co,Ce)催化剂上CO氧化反应中抗H2O与CO2的性能研究

我们研究了4种负载型Pt催化剂（1Pt/NiO、1Pt/FeO_x、1Pt/Co₃O₄和Pt/CeO₂）上不同反应条件下CO氧化活性及抗H₂O和CO₂性能.发现反应气氛中CO₂的加入与CO形成了竞争吸附,并在催化剂表面形成了碳酸盐物种堵塞了活性位,从而导致催化剂失活.反应气氛中H₂O的加入对1Pt/CeO₂催化剂的活性有所抑制,但对1Pt/FeO_x、1Pt/NiO和1Pt/Co₃O₄催化剂的活性却有促进作用.在1Pt/FeO_x和1Pt/CeO₂催化剂上的分步反应实验和动力学研究表明,尽管H₂O的加入在两种催化剂上均与CO形成了竞争吸附,但在1Pt/FeO_x催化剂上H₂O在载体表面解离形成的羟基更易与CO反应,开辟了新的反应途径,从而提高了反应性能.此外,H₂O的加入能有效分解该催化剂上的碳酸盐物种,从而保持了其稳定性.     

Diffraction and DAFS Studies of a Ba4(BaxPt1−x)Pt2O9Twinned Crystal, a Member of the Bap(BaxPt1−x)Ptp−2O3p−3Series

Crystallographic studies of the Ba–Pt–O system have been undertaken using X-ray and electron diffraction techniques. The system is described by means of a Ba_p(Ba_xPt²⁺_1−x)Pt⁴⁺_p−2O_3p−3formula which corresponds to a BaO₃hexagonal based framework with Pt chains, whereprepresents the oxygen deficiency and the presence of both Pt⁴⁺and Pt²⁺cations in the compounds, andxa possible substitution of Pt²⁺by Ba²⁺in trigonal prismatic sites. The structure of a Ba₄(Ba_0.04Pt²⁺_0.96)Pt⁴⁺₂O₉crystal has been solved by using 5548 X-ray difraction reflections collected on a twinned crystal. Refinements were performed with two distinct models: an “average”P321 space group and an “orthorhombic”C2 space group with cell parametersa=17.460(4) Å,b=10.085(2) Å,c=8.614(3) Å. In this structure, two Pt⁴⁺and one Pt²⁺cations are distributed over four Ba planes and form chains along thecaxis, consisting of two face-sharing Pt⁴⁺O₆octahedra connected with one Pt²⁺O₆trigonal prism. A lattice misfit occurs between the rigid barium lattice and the PtO₃chains, giving rise to a composite structure. Twinning and domain configurations are described and taken into account in the refinement. This twinning is related to the presence of Pt²⁺cations, whose positions break the threefold axis symmetry. A diffraction anomalous fine structure (DAFS) study was also performed on this twinned single crystal. Anomalous scattering factorsf′ andf″ for platinum in this crystal were refined near the L_IIIPt absorption edge. They confirm the weak barium occupancy of the trigonal prismataic site and the Pt⁴⁺valence of the octahedral sites. Reflection overlaps, due to twinning, flatten the DAFS sensitivity to Pt atoms in the prismatic sites and did not allow their clear valence determination, but Pt–O bond lengths agree with the presence of Pt²⁺cations at the center of prismatic faces. Electron diffraction patterns of powders having slightly different composition show a continuous evolution of incommensurate Bragg peaks and a weak correlation between the PtO₃chains. They also confirm the composite nature and the one-dimensionality of the Ba_p(Ba_xPt²⁺_1−x)Pt⁴⁺_p−2O_3p−3series, which can produce highly anisotropic physical properties.     

Activation of Water‐Splitting Photocatalysts by Loading with Ultrafine Rh–Cr Mixed‐Oxide Cocatalyst Nanoparticles

The activity of many water‐splitting photocatalysts could be improved by the use of Rh^III–Cr^III mixed oxide (Rh_2?xCr_xO₃) particles as cocatalysts. Although further improvement of water‐splitting activity could be achieved if the size of the Rh_2?xCr_xO₃ particles was decreased further, it is difficult to load ultrafine (<2 nm) Rh_2?xCr_xO₃ particles onto a photocatalyst by using conventional loading methods. In this study, a new loading method was successfully established and was used to load Rh_2?xCr_xO₃ particles with a size of approximately 1.3 nm and a narrow size distribution onto a BaLa₄Ti₄O₁₅ photocatalyst. The obtained photocatalyst exhibited an apparent quantum yield of 16 %, which is the highest achieved for BaLa₄Ti₄O₁₅ to date. Thus, the developed loading technique of Rh_2?xCr_xO₃ particles is extremely effective at improving the activity of the water‐splitting photocatalyst BaLa₄Ti₄O₁₅. This method is expected to be extended to other advanced water‐splitting photocatalysts to achieve higher quantum yields.     

Synergism of Pt nanoparticles and iron oxide support for chemoselective hydrogenation of nitroarenes under mild conditions

An efficient and low-cost supported Pt catalyst for hydrogenation of niroarenes was prepared with colloid Pt precursors and α-Fe₂O₃ as a support. The catalyst with Pt content as low as 0.2 wt% exhibits high activities, chemoselectivities and stability in the hydrogenation of nitrobenzene and a variety of niroarenes. The conversion of nitrobenzene can reach 3170 mol_conv h^?1 mol_Pt^?1 under mild conditions (30 °C, 5 bar), which is much higher than that of commercial Pt/C catalyst and many reported catalysts under similar reaction conditions. The spatial separation of the active sites for H₂ dissociation and hydrogenation should be responsible for the high chemoselectivity, which decreases the contact possibility between the reducible groups of nitroarenes and Pt nanoparticles. The unique surface properties of α-Fe₂O₃ play an important role in the reaction process. It provides active sites for hydrogen spillover and reactant adsorption, and ultimately completes the hydrogenation of the nitro group on the catalyst surface.