Unraveling the Mechanism of Water Oxidation Catalyzed by Nonheme Iron Complexes

Density functional theory (DFT) is employed to: 1) propose a viable catalytic cycle consistent with our experimental results for the mechanism of chemically driven (Ce^IV) O₂ generation from water, mediated by nonheme iron complexes; and 2) to unravel the role of the ligand on the nonheme iron catalyst in the water oxidation reaction activity. To this end, the key features of the water oxidation catalytic cycle for the highly active complexes [Fe(OTf)₂(Pytacn)] (Pytacn: 1‐(2′‐pyridylmethyl)‐4,7‐dimethyl‐1,4,7‐triazacyclononane; OTf: CF₃SO₃^?) ( 1 ) and [Fe(OTf)₂(mep)] (mep: N,N′‐bis(2‐pyridylmethyl)‐N,N′‐dimethyl ethane‐1,2‐diamine) ( 2 ) as well as for the catalytically inactive [Fe(OTf)₂(tmc)] (tmc: N,N′,N′′,N′′′‐tetramethylcyclam) ( 3 ) and [Fe(NCCH₃)(^MePy₂CH‐tacn)](OTf)₂ (^MePy₂CH‐tacn: N‐(dipyridin‐2‐yl)methyl)‐N′,N′′‐dimethyl‐1,4,7‐triazacyclononane) ( 4 ) were analyzed. The DFT computed catalytic cycle establishes that the resting state under catalytic conditions is a [Fe^IV(O)(OH₂)(LN₄)]²⁺ species (in which LN₄=Pytacn or mep) and the rate‐determining step is the O?O bond‐formation event. This is nicely supported by the remarkable agreement between the experimental (ΔG^≠=17.6±1.6 kcal mol^?1) and theoretical (ΔG^≠=18.9 kcal mol^?1) activation parameters obtained for complex 1 . The O?O bond formation is performed by an iron(V) intermediate [Fe^V(O)(OH)(LN₄)]²⁺ containing a cis‐Fe^V(O)(OH) unit. Under catalytic conditions (Ce^IV, pH 0.8) the high oxidation state Fe^V is only thermodynamically accessible through a proton‐coupled electron‐transfer (PCET) process from the cis‐[Fe^IV(O)(OH₂)(LN₄)]²⁺ resting state. Formation of the [Fe^V(O)(LN₄)]³⁺ species is thermodynamically inaccessible for complexes 3 and 4 . Our results also show that the cis‐labile coordinative sites in iron complexes have a beneficial key role in the O?O bond‐formation process. This is due to the cis‐OH ligand in the cis‐Fe^V(O)(OH) intermediate that can act as internal base, accepting a proton concomitant to the O?O bond‐formation reaction. Interplay between redox potentials to achieve the high oxidation state (Fe^V?O) and the activation energy barrier for the following O?O bond formation appears to be feasible through manipulation of the coordination environment of the iron site. This control may have a crucial role in the future development of water oxidation catalysts based on iron.     

Tracking an FeV(O) Intermediate for Water Oxidation in Water

High-valent iron-oxo species are appealing for conducting O−O bond formation for water oxidation reactions. However, their high reactivity poses a great challenge to the dissection of their chemical transformations. Herein, we introduce an electron-rich and oxidation-resistant ligand, 2-[(2,2′-bipyridin)-6-yl]propan-2-ol to stabilize such fleeting intermediates. Advanced spectroscopies and electrochemical studies demonstrate a high-valent Fe^V(O) species formation in water. Combining kinetic and oxygen isotope labelling experiments and organic reactions indicates that the Fe^V(O) species is responsible for O−O bond formation via water nucleophilic attack under the real catalytic water oxidation conditions.     

Catalytic Water Splitting with an Iridium Carbene Complex: A Theoretical Study

Catalytic water oxidation at Ir (OH)⁺ ( Ir =IrCp*(Me₂NHC), where Cp*=pentamethylcyclopentadienyl and Me₂NHC=N,N′‐dimethylimidazolin‐2‐ylidene) can occur through various competing channels. A potential‐energy surface showing these various multichannel reaction pathways provides a picture of how their importance can be influenced by changes in the oxidant potential. In the most favourable calculated mechanism, water oxidation occurs via a pathway that includes four sequential oxidation steps, prior to formation of the O?O bond. The first three oxidation steps are exothermic upon treatment with cerium ammonium nitrate and lead to formation of Ir ^V(?O)(O ^. )⁺, which is calculated to be the most stabile species under these conditions, whereas the fourth oxidation step is the potential‐energy‐determining step. O?O bond formation takes place by coupling of the two oxo ligands along a direct pathway in the rate‐limiting step. Dissociation of dioxygen occurs in two sequential steps, regenerating the starting material Ir (OH)⁺. The calculated mechanism fits well with the experimentally observed rate law: v=k_obs[ Ir ][oxidant]. The calculated effective barrier of 24.6 kcal mol^?1 fits well with the observed turnover frequency of 0.88 s^?1. Under strongly oxidative conditions, O?O bond formation after four sequential oxidation steps is the preferred pathway, whereas under milder conditions O?O bond formation after three sequential oxidation steps becomes competitive.     

A Highly Oxidizing and Isolable Oxoruthenium(V) Complex [RuV(N4O)(O)]2+: Electronic Structure,Redox Properties,and Oxidation Reactions Investigated by DFT Calculations

The electronic structure and redox properties of the highly oxidizing, isolable Ru^V?O complex [Ru^V(N₄O)(O)]²⁺, its oxidation reactions with saturated alkanes (cyclohexane and methane) and inorganic substrates (hydrochloric acid and water), and its intermolecular coupling reaction have been examined by DFT calculations. The oxidation reactions with cyclohexane and methane proceed through hydrogen atom transfer in a transition state with a calculated free energy barrier of 10.8 and 23.8 kcal mol^?1, respectively. The overall free energy activation barrier (ΔG^≠=25.5 kcal mol^?1) of oxidation of hydrochloric acid can be decomposed into two parts: the formation of [Ru^III(N₄O)(HOCl)]²⁺ (ΔG=15.0 kcal mol^?1) and the substitution of HOCl by a water molecule (ΔG^≠=10.5 kcal mol^?1). For water oxidation, nucleophilic attack on Ru^V?O by water, leading to O? O bond formation, has a free energy barrier of 24.0 kcal mol^?1, the major component of which comes from the cleavage of the H? OH bond of water. Intermolecular self‐coupling of two molecules of [Ru^V(N₄O)(O)]²⁺ leads to the [(N₄O)Ru^IV? O₂? Ru^III(N₄O)]⁴⁺ complex with a calculated free energy barrier of 12.0 kcal mol^?1.     

Formation of the iron-oxo hydroxylating species in the catalytic cycle of aromatic amino acid hydroxylases

The first part of the catalytic cycle of the pterin‐dependent, dioxygen‐using nonheme‐iron aromatic amino acid hydroxylases, leading to the Fe^IV?O hydroxylating intermediate, has been investigated by means of density functional theory. The starting structure in the present investigation is the water‐free Fe? O₂ complex cluster model that represents the catalytically competent form of the enzymes. A model for this structure was obtained in a previous study of water‐ligand dissociation from the hexacoordinate model complex of the X‐ray crystal structure of the catalytic domain of phenylalanine hydroxylase in complex with the cofactor (6R)‐L ‐erythro‐5,6,7,8‐tetrahydrobiopterin (BH₄) (PAH‐Fe^II‐BH₄). The O? O bond rupture and two‐electron oxidation of the cofactor are found to take place via a Fe‐O‐O‐BH₄ bridge structure that is formed in consecutive radical reactions involving a superoxide ion, O₂^?. The overall effective free‐energy barrier to formation of the Fe^IV?O species is calculated to be 13.9 kcal mol^?1, less than 2 kcal mol^?1 lower than that derived from experiment. The rate‐limiting step is associated with a one‐electron transfer from the cofactor to dioxygen, whereas the spin inversion needed to arrive at the quintet state in which the O? O bond cleavage is finalized, essentially proceeds without activation.     

Mechanistic Insight into Peroxo‐Shunt Formation of Biomimetic Models for Compound II,Their Reactivity toward Organic Substrates,and the Influence of N‐Methylimidazole Axial Ligation

High‐valent iron‐oxo species have been invoked as reactive intermediates in catalytic cycles of heme and nonheme enzymes. The studies presented herein are devoted to the formation of compound II model complexes, with the application of a water soluble (TMPS)Fe^III(OH) porphyrin ([meso‐tetrakis(2,4,6‐trimethyl‐3‐sulfonatophenyl)porphinato]iron(III) hydroxide) and hydrogen peroxide as oxidant, and their reactivity toward selected organic substrates. The kinetics of the reaction of H₂O₂ with (TMPS)Fe^III(OH) was studied as a function of temperature and pressure. The negative values of the activation entropy and activation volume for the formation of (TMPS)Fe^IV?O(OH) point to the overall associative nature of the process. A pH‐dependence study on the formation of (TMPS)Fe^IV?O(OH) revealed a very high reactivity of OOH^? toward (TMPS)Fe^III(OH) in comparison to H₂O₂. The influence of N‐methylimidazole (N‐MeIm) ligation on both the formation of iron(IV)‐oxo species and their oxidising properties in the reactions with 4‐methoxybenzyl alcohol or 4‐methoxybenzaldehyde, was investigated in detail. Combined experimental and theoretical studies revealed that among the studied complexes, (TMPS)Fe^III(H₂O)(N‐MeIm) is highly reactive toward H₂O₂ to form the iron(IV)‐oxo species, (TMPS)Fe^IV?O(N‐MeIm). The latter species can also be formed in the reaction of (TMPS)Fe^III(N‐MeIm)₂ with H₂O₂ or in the direct reaction of (TMPS)Fe^IV?O(OH) with N‐MeIm. Interestingly, the kinetic studies involving substrate oxidation by (TMPS)Fe^IV?O(OH) and (TMPS)Fe^IV?O(N‐MeIm) do not display a pronounced effect of the N‐MeIm axial ligand on the reactivity of the compound II mimic in comparison to the OH^? substituted analogue. Similarly, DFT computations revealed that the presence of an axial ligand (OH^? or N‐MeIm) in the trans position to the oxo group in the iron(IV)‐oxo species does not significantly affect the activation barriers calculated for C?H dehydrogenation of the selected organic substrates.     

Axial Ligand and Spin‐State Influence on the Formation and Reactivity of Hydroperoxo–Iron(III) Porphyrin Complexes

The present study focuses on the formation and reactivity of hydroperoxo–iron(III) porphyrin complexes formed in the [Fe^III(tpfpp)X]/H₂O₂/HOO^? system (TPFPP=5,10,15,20‐tetrakis(pentafluorophenyl)‐21H,23H‐porphyrin; X=Cl^? or CF₃SO₃^?) in acetonitrile under basic conditions at ?15 °C. Depending on the selected reaction conditions and the active form of the catalyst, the formation of high‐spin [Fe^III(tpfpp)(OOH)] and low‐spin [Fe^III(tpfpp)(OH)(OOH)] could be observed with the application of a low‐temperature rapid‐scan UV/Vis spectroscopic technique. Axial ligation and the spin state of the iron(III) center control the mode of O? O bond cleavage in the corresponding hydroperoxo porphyrin species. A mechanistic changeover from homo‐ to heterolytic O? O bond cleavage is observed for high‐ [Fe^III(tpfpp)(OOH)] and low‐spin [Fe^III(tpfpp)(OH)(OOH)] complexes, respectively. In contrast to other iron(III) hydroperoxo complexes with electron‐rich porphyrin ligands, electron‐deficient [Fe^III(tpfpp)(OH)(OOH)] was stable under relatively mild conditions and could therefore be investigated directly in the oxygenation reactions of selected organic substrates. The very low reactivity of [Fe^III(tpfpp)(OH)(OOH)] towards organic substrates implied that the ferric hydroperoxo intermediate must be a very sluggish oxidant compared with the iron(IV)–oxo porphyrin π‐cation radical intermediate in the catalytic oxygenation reactions of cytochrome P450.     

Aromatic Hydroxylation at a Non‐Heme Iron Center: Observed Intermediates and Insights into the Nature of the Active Species

Mechanism of substrate oxidations with hydrogen peroxide in the presence of a highly reactive, biomimetic, iron aminopyridine complex, [Fe^II(bpmen)(CH₃CN)₂][ClO₄]₂ ( 1 ; bpmen=N,N'‐dimethyl‐N,N'‐bis(2‐pyridylmethyl)ethane‐1,2‐diamine), is elucidated. Complex 1 has been shown to be an excellent catalyst for epoxidation and functional‐group‐directed aromatic hydroxylation using H₂O₂, although its mechanism of action remains largely unknown. 1 , 2 Efficient intermolecular hydroxylation of unfunctionalized benzene and substituted benzenes with H₂O₂ in the presence of 1 is found in the present work. Detailed mechanistic studies of the formation of iron(III)–phenolate products are reported. We have identified, generated in high yield, and experimentally characterized the key Fe^III(OOH) intermediate (λ_max=560 nm, rhombic EPR signal with g=2.21, 2.14, 1.96) formed by 1 and H₂O₂. Stopped‐flow kinetic studies showed that Fe^III(OOH) does not directly hydroxylate the aromatic rings, but undergoes rate‐limiting self‐decomposition producing transient reactive oxidant. The formation of the reactive species is facilitated by acid‐assisted cleavage of the O? O bond in the iron–hydroperoxide intermediate. Acid‐assisted benzene hydroxylation with 1 and a mechanistic probe, 2‐Methyl‐1‐phenyl‐2‐propyl hydroperoxide (MPPH), correlates with O? O bond heterolysis. Independently generated Fe^IV?O species, which may originate from O? O bond homolysis in Fe^III(OOH), proved to be inactive toward aromatic substrates. The reactive oxidant derived from 1 exchanges its oxygen atom with water and electrophilically attacks the aromatic ring (giving rise to an inverse H/D kinetic isotope effect of 0.8). These results have revealed a detailed experimental mechanistic picture of the oxidation reactions catalyzed by 1 , based on direct characterization of the intermediates and products, and kinetic analysis of the individual reaction steps. Our detailed understanding of the mechanism of this reaction revealed both similarities and differences between synthetic and enzymatic aromatic hydroxylation reactions.     

Spin State Tunes Oxygen Atom Transfer towards FeIVO Formation in FeII Complexes

Oxoiron(IV) complexes bearing tetradentate ligands have been extensively studied as models for the active oxidants in non-heme iron-dependent enzymes. These species are commonly generated by oxidation of their ferrous precursors. The mechanisms of these reactions have seldom been investigated. In this work, the reaction kinetics of complexes [Fe^II(CH₃CN)₂L](SbF₆)₂ ( [1](SbF₆)₂ and [2](SbF₆)₂ ) and [Fe^II(CF₃SO₃)₂L] ( [1](OTf)₂ and [2](OTf)₂ ( 1 , L=^Me,HPytacn; 2 , L=^nP,HPytacn; ^R,R′Pytacn=1-[(6-R′-2-pyridyl)methyl]-4,7- di-R-1,4,7-triazacyclononane) with Bu₄NIO₄ to form the corresponding [Fe^IV(O)(CH₃CN)L]²⁺ ( 3 , L=^Me,HPytacn; 4 , L=^nP,HPytacn) species was studied in acetonitrile/acetone at low temperatures. The reactions occur in a single kinetic step with activation parameters independent of the nature of the anion and similar to those obtained for the substitution reaction with Cl⁻ as entering ligand, which indicates that formation of [Fe^IV(O)(CH₃CN)L]²⁺ is kinetically controlled by substitution in the starting complex to form [Fe^II(IO₄)(CH₃CN)L]⁺ intermediates that are converted rapidly to oxo complexes 3 and 4 . The kinetics of the reaction is strongly dependent on the spin state of the starting complex. A detailed analysis of the magnetic susceptibility and kinetic data for the triflate complexes reveals that the experimental values of the activation parameters for both complexes are the result of partial compensation of the contributions from the thermodynamic parameters for the spin-crossover equilibrium and the activation parameters for substitution. The observation of these opposite and compensating effects by modifying the steric hindrance at the ligand illustrates so far unconsidered factors governing the mechanism of oxygen atom transfer leading to high-valent iron oxo species.     

Robust and efficient amide-based nonheme manganese(III) hydrocarbon oxidation catalysts: substrate and solvent effects on involvement and partition of multiple active oxidants

Two new mononuclear nonheme manganese(III) complexes of tetradentate ligands containing two deprotonated amide moieties, [Mn(bpc)Cl(H₂O)] ( 1 ) and [Mn(Me₂bpb)Cl(H₂O)] ? CH₃OH ( 2 ), were prepared and characterized. Complex 2 has also been characterized by X‐ray crystallography. Magnetic measurements revealed that the complexes are high spin (S=5/2) Mn^III species with typical magnetic moments of 4.76 and 4.95 μ_B, respectively. These nonheme Mn^III complexes efficiently catalyzed olefin epoxidation and alcohol oxidation upon treatment with MCPBA under mild experimental conditions. Olefin epoxidation by these catalysts is proposed to involve the multiple active oxidants Mn^V?O, Mn^IV?O, and Mn^III? OO(O)CR. Evidence for this approach was derived from reactivity and Hammett studies, KIE (k_H/k_D) values, H₂¹⁸O‐exchange experiments, and the use of peroxyphenylacetic acid as a mechanistic probe. In addition, it has been proposed that the participation of Mn^V?O, Mn^IV?O, and Mn^III? OOR could be controlled by changing the substrate concentration, and that partitioning between heterolysis and homolysis of the O? O bond of a Mn‐acylperoxo intermediate (Mn? OOC(O)R) might be significantly affected by the nature of solvent, and that the O? O bond of the Mn? OOC(O)R might proceed predominantly by heterolytic cleavage in protic solvent. Therefore, a discrete Mn^V?O intermediate appeared to be the dominant reactive species in protic solvents. Furthermore, we have observed close similarities between these nonheme Mn^III complex systems and Mn(saloph) catalysts previously reported, suggesting that this simultaneous operation of the three active oxidants might prevail in all the manganese‐catalyzed olefin epoxidations, including Mn(salen), Mn(nonheme), and even Mn(porphyrin) complexes. This mechanism provides the greatest congruity with related oxidation reactions by using certain Mn complexes as catalysts.     

Beneficial Effect of Acetic Acid on the Formation of FeIII(OOH) Species and on the Catalytic Activity of Bioinspired Nonheme FeII Complexes.

Three new amine/pyridine Fe^II complexes bearing pentadentate ligand with one, two or three electron enriched 4-methoxy-3,5-dimethylpyridine were used as catalysts for the oxidation of small organic molecules by hydrogen peroxide. The distribution of products formed suggests that these ligands are not enough electron donating to promote the O−O heterolytic cleavage of the oxidant in order to generate selective Fe^V(O) species. Using acetic acid in the reaction mixtures results in a significant increase of the efficiency of these catalytic systems. Our investigations show that the use of AcOH leads to the protonation/dissociation of a pyridyl moiety and the formation of (N₄)Fe^II(OAc)(OH) species. These complexes readily react with excess hydrogen peroxide to yield (N₄)Fe^III(OAc)(OOH) intermediates. These latter intermediates are proposed to evolve into (N₄)Fe^IV(OAc)(O), which are more efficient than the usual (N₄)Fe^IV(O) and (N₅)Fe^IV(O).     

The Mechanism of Stereospecific C?H Oxidation by Fe(Pytacn) Complexes: Bioinspired Non‐Heme Iron Catalysts Containing cis‐Labile Exchangeable Sites

A detailed mechanistic study of the hydroxylation of alkane C? H bonds using H₂O₂ by a family of mononuclear non heme iron catalysts with the formula [Fe^II(CF₃SO₃)₂(L)] is described, in which L is a tetradentate ligand containing a triazacyclononane tripod and a pyridine ring bearing different substituents at the α and γ positions, which tune the electronic or steric properties of the corresponding iron complexes. Two inequivalent cis‐labile exchangeable sites, occupied by triflate ions, complete the octahedral iron coordination sphere. The C? H hydroxylation mediated by this family of complexes takes place with retention of configuration. Oxygen atoms from water are incorporated into hydroxylated products and the extent of this incorporation depends in a systematic manner on the nature of the catalyst, and the substrate. Mechanistic probes and isotopic analyses, in combination with detailed density functional theory (DFT) calculations, provide strong evidence that C? H hydroxylation is performed by highly electrophilic [Fe^V(O)(OH)L] species through a concerted asynchronous mechanism, involving homolytic breakage of the C? H bond, followed by rebound of the hydroxyl ligand. The [Fe^V(O)(OH)L] species can exist in two tautomeric forms, differing in the position of oxo and hydroxide ligands. Isotopic‐labeling analysis shows that the relative reactivities of the two tautomeric forms are sensitively affected by the α substituent of the pyridine, and this reactivity behavior is rationalized by computational methods.     

Nonheme Iron Mediated Oxidation of Light Alkanes with Oxone: Characterization of Reactive Oxoiron(IV) Ligand Cation Radical Intermediates by Spectroscopic Studies and DFT Calculations

The oxidation of light alkanes that is catalyzed by heme and nonheme iron enzymes is widely proposed to involve highly reactive {Fe^V?O} species or {Fe^IV?O} ligand cation radicals. The identification of these high‐valent iron species and the development of an iron‐catalyzed oxidation of light alkanes under mild conditions are of vital importance. Herein, a combination of tridentate and bidentate ligands was used for the generation of highly reactive nonheme {Fe?O} species. A method that employs [Fe^III(Me₃tacn)(Cl‐acac)Cl]⁺ as a catalyst in the presence of oxone was developed for the oxidation of hydrocarbons, including cyclohexane, propane, and ethane (Me₃tacn=1,4,7‐trimethyl‐1,4,7‐triazacyclononane; Cl‐acac=3‐chloro‐acetylacetonate). The complex [Fe^III(Tp)₂]⁺ and oxone enabled stoichiometric oxidation of propane and ethane. ESI‐MS, EPR and UV/Vis spectroscopy, ¹⁸O labeling experiments, and DFT studies point to [Fe^IV(Me₃tacn)({Cl‐acac}^.+)(O)]²⁺ as the catalytically active species.     

In Situ and Theoretical Studies for the Dissociation of Water on an Active Ni/CeO2 Catalyst: Importance of Strong Metal–Support Interactions for the Cleavage of O–H Bonds

Water dissociation is crucial in many catalytic reactions on oxide‐supported transition‐metal catalysts. Supported by experimental and density‐functional theory results, the effect of the support on O? H bond cleavage activity is elucidated for nickel/ceria systems. Ambient‐pressure O 1s photoemission spectra at low Ni loadings on CeO₂(111) reveal a substantially larger amount of OH groups as compared to the bare support. Computed activation energy barriers for water dissociation show an enhanced reactivity of Ni adatoms on CeO₂(111) compared with pyramidal Ni₄ particles with one Ni atom not in contact with the support, and extended Ni(111) surfaces. At the origin of this support effect is the ability of ceria to stabilize oxidized Ni²⁺ species by accommodating electrons in localized f‐states. The fast dissociation of water on Ni/CeO₂ has a dramatic effect on the activity and stability of this system as a catalyst for the water‐gas shift and ethanol steam reforming reactions.     

O−O Bond Formation and Liberation of Dioxygen Mediated by N5‐Coordinate Non‐Heme Iron(IV) Complexes

Formation of the O?O bond is considered the critical step in oxidative water cleavage to produce dioxygen. High‐valent metal complexes with terminal oxo (oxido) ligands are commonly regarded as instrumental for oxygen evolution, but direct experimental evidence is lacking. Herein, we describe the formation of the O?O bond in solution, from non‐heme, N₅‐coordinate oxoiron(IV) species. Oxygen evolution from oxoiron(IV) is instantaneous once meta‐chloroperbenzoic acid is administered in excess. Oxygen‐isotope labeling reveals two sources of dioxygen, pointing to mechanistic branching between HAT (hydrogen atom transfer)‐initiated free‐radical pathways of the peroxides, which are typical of catalase‐like reactivity, and iron‐borne O?O coupling, which is unprecedented for non‐heme/peroxide systems. Interpretation in terms of [Fe^IV(O)] and [Fe^V(O)] being the resting and active principles of the O?O coupling, respectively, concurs with fundamental mechanistic ideas of (electro‐) chemical O?O coupling in water oxidation catalysis (WOC), indicating that central mechanistic motifs of WOC can be mimicked in a catalase/peroxidase setting.     

Osmium(III) and Osmium(V) Complexes Bearing a Macrocyclic Ligand: A Simple and Efficient Catalytic System for cis‐Dihydroxylation of Alkenes with Hydrogen Peroxide

A simple protocol that uses [Os^III(OH)(H₂O)(L ‐N₄Me₂)](PF₆)₂ ( 1 ; L ‐N₄Me₂=N,N′‐dimethyl‐2,11‐diaza[3.3](2,6)pyridinophane) as a catalyst and H₂O₂ as a terminal oxidant for efficient cis‐1,2‐dihydroxylation of alkenes is presented. Unfunctionalized (or aliphatic) alkenes and alkenes/styrenes containing electron‐withdrawing groups are selectively oxidized to the corresponding vicinal diols in good to excellent yields (46–99 %). In the catalytic reactions, the stoichiometry of alkene:H₂O₂ is 1:1, and thus the oxidant efficiency is very high. For the dihydroxylation of cyclohexene, the catalytic amount of 1 can be reduced to 0.01 mol % to achieve a very high turnover number of 5500. The active oxidant is identified as the Os^V(O)(OH) species ( 2 ), which is formed via the hydroperoxide adduct, an Os^III(OOH) species. The active oxidant 2 is successfully isolated and crystallographically characterized.     

Trapping of a Highly Reactive Oxoiron(IV) Complex in the Catalytic Epoxidation of Olefins by Hydrogen Peroxide

The generation of a nonheme oxoiron(IV) intermediate, [(cyclam)Fe^IV(O)(CH₃CN)]²⁺ ( 2 ; cyclam=1,4,8,11‐tetraazacyclotetradecane), is reported in the reactions of [(cyclam)Fe^II]²⁺ with aqueous hydrogen peroxide (H₂O₂) or a soluble iodosylbenzene (sPhIO) as a rare example of an oxoiron(IV) species that shows a preference for epoxidation over allylic oxidation in the oxidation of cyclohexene. Complex 2 is kinetically and catalytically competent to perform the epoxidation of olefins with high stereo‐ and regioselectivity. More importantly, 2 is likely to be the reactive intermediate involved in the catalytic epoxidation of olefins by [(cyclam)Fe^II]²⁺ and H₂O₂. In spite of the predominance of the oxoiron(IV) cores in biology, the present study is a rare example of high‐yield isolation and spectroscopic characterization of a catalytically relevant oxoiron(IV) intermediate in chemical oxidation reactions.     

A Highly Reactive Seven‐Coordinate Osmium(V) Oxo Complex: [OsV(O)(qpy)(pic)Cl]2+

Seven‐coordinate ruthenium oxo species have been proposed as active intermediates in catalytic water oxidation by a number of highly active ruthenium catalysts, however such species have yet to be isolated. Reported herein is the first example of a seven‐coordinate group 8 metal‐oxo species, [Os^V(O)(qpy)(pic)Cl]²⁺ (qpy=2,2′:6′,2′′:6′′,2′′′‐quaterpyridine, pic=4‐picoline). The X‐ray crystal structure of this complex shows that it has a distorted pentagonal bipyramidal geometry with an Os?O distance of 1.7375 Å. This oxo species undergoes facile O‐atom and H‐atom‐transfer reactions with various organic substrates. Notably it can abstract H atoms from alkylaromatics with C? H bond dissociation energy as high as 90 kcal mol^?1. This work suggests that highly active oxidants may be designed based on group 8 seven‐coordinate metal oxo species.     

Heterobimetallic NiFe Cooperative Molecular Water Oxidation Catalyst

We reported herein the development of heterobimetallic NiFe molecular platform to understand NiFe synergistic effect in water oxidation catalysis. Compared to homonuclear bimetallic compounds (NiNi and FeFe), NiFe complex possesses more remarkable catalytic water oxidation performance. Mechanistic studies suggest that this remarkable difference is attributed to the fact that NiFe synergy can effectively promote O−O bond formation. The generated Ni^III(μ-O)Fe^IV=O is the key intermediate and O−O bond was formed via intramolecular oxyl-oxo coupling between bridged O radical and terminal Fe^IV=O moiety.     

Density functional theory study of the oxidation of methanol to formaldehyde on a hydrated vanadia cluster

Density functional theory was used to study the mechanism for the oxidation of methanol to formaldehyde. A vanadium oxide cluster O?V(OH)₃ has been utilized to represent the catalytic system under hydrated conditions, i.e., in the presence of V? OH hydroxyl groups. Two types of methoxy‐intermediates have been considered: a penta‐coordinate methoxy‐intermediate (OH)₄V(OCH₃) and a tetrahedral methoxy‐intermediate (OH)₂VO(OCH₃)(H₂O). The most plausible reaction pathway corresponds to the process involving first the formation of the tetrahedral methoxide, and a subsequent rate‐limiting step where hydrogen is transferred from the methoxy groups toward the oxygen atom of the vanadyl V?O site. The reaction mechanism is a typical two‐state reactivity process due to a change of the multiplicity (reactive singlet → product triplet) along the reaction coordinate accompanied by a reduction of the vanadium center from V^V (d⁰) to V^III (d²). Minimum energy crossing points were localized and possible spin inversion processes are discussed by means of the intrinsic reaction coordinate approach to find the most favorable reaction pathways. The hydration effect is found to be mainly the destabilization of the methoxy intermediates. An alternative reaction pathway with a lower apparent barrier is presented. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010