Lanthanide N,N′-piperazine-bis(methylenephosphonates) (Ln=La, Ce, Nd) that display flexible frameworks, reversible hydration and cation exchange

Hydrothermal syntheses of lanthanide bisphosphonate metal organic frameworks comprising the light lanthanides lanthanum, cerium and neodymium and N,N′-piperazine bis(methylenephosphonic acid) (H₂L(1) and its 2-methyl and 2,5-dimethyl derivatives (H₂L(2) and H₂L(3)) gives three new structure types. At elevated starting pH (ca. 5 and above) syntheses give ‘type I’ materials with all metals and acids of the study (MLnLxH₂O, M=Na, K, Cs; Ln=La, Ce, Nd; x≈4: KCeL(1)·4H₂O, C2/c, a=23.5864(2) Å, b=12.1186(2) Å, c=5.6613(2) Å, β=93.040(2)°). The framework of structure type I shows considerable flexibility as the ligand is changed, due mainly to rotation around the -N-CH₂- bond of the linker in response to steric considerations. Type I materials demonstrate cation exchange and dehydration and rehydration behaviour. Upon dehydration of KCeL·4H₂O, the space group changes to P2₁/n, a=21.8361(12) Å, b=9.3519(4) Å, c=5.5629(3) Å, β=96.560(4)°, as a result of a change of the piperazine ring from chair to boat configuration. When syntheses are performed at lower pH, two other structure types crystallise. With the ‘non-methyl’ ligand 1, type II materials result (LnL(1)H₂L(1)·4.5H₂O: Ln=La, P−1, a=5.7630(13) Å, b=10.213(2) Å, c=11.649(2) Å, α=84.242(2)°, β=89.051(2)°, γ=82.876(2)°) in which one half of the ligands coordinate via the piperazine nitrogen atoms. With the 2-methyl ligand, structure type III crystallises (LnHL(2)·4H₂O: Ln=Nd, Ce, P2₁/c, a=5.7540(9) Å, b=14.1259(18) Å, c=21.156(5) Å, β=90.14(2)°) due to unfavourable steric interactions of the methyl group in structure type II.     

Quaternäre Caesium‐Kupfer(I)‐Lanthanoid(III)‐Selenide vom Typ CsCu3M2Se5 (M = Sm,Gd — Lu)

Quaternary Cesium Copper(I) Lanthanoid(III) Selenides of the Type CsCu₃M₂Se₅ (M = Sm, Gd — Lu) By oxidation of mixtures of copper and lanthanoid metal with elemental selenium in molar ratios of 1 : 1 : 2 and in addition of CsCl quaternary cesium copper(I) lanthanoid(III) selenides with the formula CsCu₃M₂Se₅ (M = Sm, Gd — Lu) were obtained at 750 °C within a week from torch‐sealed evacuated silica tubes. An excess of CsCl as flux helps to crystallize golden yellow or red, needle‐shaped, water‐resistant single crystals. The crystal structure of CsCu₃M₂Se₅ (M = Sm, Gd — Lu) (orthorhombic, Cmcm, Z = 4; e. g. CsCu₃Sm₂Se₅: a = 417.84(3), b = 1470.91(8), c = 1764.78(9) pm and CsCu₃Lu₂Se₅: a = 407.63(3), b = 1464.86(8), c = 1707.21(9) pm, respectively) contains [MSe₆]^9— octahedra which share edges to form double chains running along [100]. Those are further connected by vertices to generate a two‐dimensional layer parallel to (010). By edge‐ and vertex‐linking of [CuSe₄]^7— tetrahedra two crystallographically different Cu⁺ cations build up two‐dimensional puckered layers parallel to (010) as well. These sheet‐like structure interconnects the equation/tex2gif-stack-3.gif{[M₂Se₅]^4—} layers to create a three‐dimensional network according to equation/tex2gif-stack-4.gif{[Cu₃M₂Se₅]^—}. Thus empty channels along [100] form, apt to take up the Cs⁺ cations. These are surrounded by eight plus one Se^2— anions in the shape of (2+1)‐fold capped trigonal prisms with Cs—Se distances between 348 and 368 pm (8×) and 437 (for M = Sm) or 440 pm (for M = Lu), respectively, for the ninth ligand.     

N,N′‐Bis(Salicylidene)‐1,2‐Cyclohexanediamine Lanthanide(III) Coordination Polymers: Syntheses,Crystal Structures,and Luminescence Properties

The salen‐type ligand H₂L [H₂L = N,N′‐bis(salicylidene)‐1,2‐cyclohexanediamine] was utilized for the synthesis of two lanthanide(III) coordination polymers [LnH₂L(NO₃)₃MeOH]_n [Ln = Eu ( 1 ) and Ln = Lu ( 2 )]. The single‐crystal X‐ray diffraction analyses of 1 and 2 revealed that they are isomorphous and exhibit one‐dimension neutral structure, in which H₂L effectively functions as a bridging ligand and give rise to a chain‐like polymer. The luminescent properties of polymers in solid state and in solution were investigated and 1 exhibits typical red luminescence of Eu^III ions in solid state and dichloromethane solution and 2 emits the ligand‐centered blue luminescence. The energy transfer mechanisms in these luminescent lanthanide polymers were described through calculation of the lowest triplet level of ligand H₂L.     

Unusual Transformation from a Solvent‐Stabilized 1D Coordination Polymer to a Metal–Organic Framework (MOF)‐Like Cross‐Linked 3D Coordination Polymer

An unusual 1D‐to‐3D transformation of a coordination polymer based on organic linkers containing highly polar push–pull π‐conjugated side chains is reported. The coordination polymers are synthesized from zinc nitrate and an organic linker, namely, 2,5‐bis{4‐[1‐(4‐nitrophenyl)pyrrolidin‐2‐yl]butoxy}terephthalic acid, which possesses highly polar (4‐nitrophenyl)pyrrolidine groups, with high dipole moments of about 7 D. The coordination polymers exhibit an unusual transformation from a soluble, solvent‐stabilized 1D coordination polymer into an insoluble, metal–organic framework (MOF)‐like 3D coordination polymer. The coordination polymer exhibits good film‐forming ability, and the MOF‐like films are insoluble in conventional organic solvents.     

Similarities of Coordination Polymer and Dimeric Complex of Europium(III) with Joint and Separate Terpyridine and Benzoate

A dimeric complex of trivalent europium [Eu₂Cl₄(bc)₂(ptpy)₂] ( 1 ), containing the separate ligands 4'-phenyl-2,2':6',2''-terpyridine (ptpy) and benzoate (bc^–) and a one-dimensional double strand coordination polymer of the composition ¹_∞[EuCl₂(cptpy)] ( 2 ) with 4-[2,2':6',2''-terpyridin]-4'-yl-benzoate (cptpy^–) were obtained. The products exhibit structural similarities despite the character of joint and separate functionality of the ligands. The dimer 1 shows photoluminescence with high quantum yield [61(2) %]. Eu³⁺ emission lifetime is 1.493(1) ms at room temperature and rises to 1.649(1) ms upon cooling to 77 K.     

Synthesis,Crystal Structure,Fluorescent and Antioxidation Properties of Cerium(III) and Europium(III) Complexes with Bis(3‐methoxysalicylidene)‐3‐oxapentane‐1,5‐diamine

Two aliphatic ether Schiff base lanthanide complexes (Ln = Eu, Ce) with bis(3‐methoxysalicylidene)‐3‐oxapentane‐1,5‐diamine (Bod), were synthesized and characterized by physicochemical and spectroscopic methods. [Eu(Bod)(NO₃)₃] ( 1 ) is a discrete mononuclear species and [Ce(Bod)(NO₃)₃DMF]_∞ ( 2 ) exhibits an inorganic coordination polymer. In the two complexes, the metal ions both are ten‐coordinated and the geometric structure around the Ln^III atom can be described as distorted hexadecahedron. Under excitation at room temperature, the red shift in the fluorescence band of the ligand in the complexes compared with that of the free ligand can be attributed to coordination of the rare earth ions to the ligand. Moreover, the antioxidant activities of the two complexes were investigated. The results demonstrated that the complexes have better scavenging activity than both the ligand and the usual antioxidants on the hydroxyl and superoxide radicals.     

One‐dimensional Europium(III) Coordination Polymer Based on 3‐Pyridylacrylic Acid

Under hydrothermal conditions, the reaction of racemic 3‐pyridyl‐3‐aminopropionic acid (rac‐HPAPA) with Eu(ClO₄)₃· 6H₂O affords a 1‐D chain complex, [Eu(3‐PYA)₃(H₂O)]_n ( 1 ) (3‐PYA=3‐pyridylacrylate), which represents an example of neutral 1‐D coordination polymeric material based on 3‐HPYA (HPYA= pyridylacrylic acid) ligand with strong red fluorescent emission in the solid state.     

Photoluminescence Properties of Lanthanide‐Organic Frameworks (LnOFs) with Thiophene‐2,5‐Dicarboxylate and Acetate

S‐heterocyclic dicarboxylic acid, thiophene‐2,5‐dicarboxylic acid (H₂TDC), was employed to construct a series of lanthanide‐organic frameworks (LnOFs) with coligand acetate, formulated as [Ln(TDC)(OAc)(H₂O)]_n [Ln = Eu ( 1 ), Tb ( 2 ), Gd ( 3 ), Dy ( 4 ), Sm ( 5 )] under hydrothermal conditions. Structure analysis reveals that 1 – 5 have dinuclear 3D metal organic frameworks (MOFs), in which TDC^2– and OAc^– display (κ¹‐κ¹)‐(κ¹–κ¹)‐μ₄ and (κ²‐κ¹)‐μ₂ coordination fashions, respectively. The dehydrated products of all compounds show high thermal stability above 410 °C. As for 1 , 2 , 4 , and 5 , the photoluminescence analyses exhibit characteristic luminescence emission bands of the corresponding lanthanide ions in the visible region. In particular, compound 2 displays bright green luminescence in the solid state with ⁵D₄ lifetime of 0.510 ms and relative high overall quantum yield of 16 %, based on an ideal energy gap between the lowest triplet state energy level of H₂TDC ligand and the ⁵D₄ state energy level of Tb³⁺. The energy transfer mechanisms in compounds 1 and 2 were also discussed.     

Two New Benzoate‐di(methylcyclopentadienyl)ytterbium(III) Complexes: [Yb(MeCp)2(O2CC6F5)]2 and [Yb(MeCp)2(O2C‐o‐HC6F4)]2

Transparent orange crystals of [Yb(MeCp)₂(O₂CC₆F₅)]₂ and [Yb(MeCp)₂(O₂C‐o‐HC₆F₄)]₂ were obtained by oxidation of Yb(MeCp)₂ with M(O₂CR) (M = ¹/₂ Hg, Tl; R = C₆F₅, o‐HC₆F₄) in tetrahydrofuran. They have a dimeric structure with bridging bidentate (O, O')‐benzoate groups and eight coordinated ytterbium. Both crystallise isotypic in the orthorhombic space group Pbca. Room temperature as well as low temperature single crystal X‐ray investigations show the o‐H/F positions in [Yb(MeCp)₂(O₂C‐o‐HC₆F₄)]₂ not to be ordered.     

meso‐(2‐Pyridyl)‐boron(III)‐subporphyrin: Perimeter Iridium(III) Coordination

Peripherally metalated porphyrinoids are promising functional π‐systems displaying characteristic optical, electronic, and catalytic properties. In this work, 5‐(2‐pyridyl)‐ and 5,10,15‐tri(2‐pyridyl)‐B^III‐subporphyrins were prepared and used to produce cyclometalated subporphyrins by reactions with [Cp*IrCl₂]₂, which proceeded through an efficient C?H activation to give the corresponding mono‐ and tri‐Ir^III complexes, respectively. While the mono‐Ir^III complex was obtained as a diastereomeric mixture, a C₃‐symmetric tri‐Ir^III complex with the three Cp*‐units all at the concave side was predominantly obtained in a high yield of 90 %, which displays weak NIR phosphorescence even at room temperature in degassed CH₂Cl₂, differently from the mono‐Ir^III complexes.     

Superconductivity in a Copper(II)‐Based Coordination Polymer with Perfect Kagome Structure

A highly crystalline copper(II) benzenehexathiolate coordination polymer (Cu‐BHT) has been prepared. The two‐dimensional kagome structure has been confirmed by powder X‐ray diffraction, high‐resolution transmission electron microscopy, and high‐resolution scanning transmission electron microscopy. The as‐prepared sample exhibits bulk superconductivity at about 0.25 K, which is confirmed by the zero resistivity, AC magnetic susceptibility, and specific heat measurements. Another diamagnetic transition at about 3 K suggests that there is a second superconducting phase that may be associated with a single layer or few layers of Cu‐BHT. It is the first time that superconductivity has been observed in a coordination polymer.     

Preparation of a Yb(III)‐Incorporated porous polymer by post‐Coordination: Enhancement of gas adsorption and catalytic activity

We synthesized a Yb(III)‐incorporated microporous polymer (Yb‐ADA) and studied its gas adsorption property and catalytic activity. The adamantane‐based porous polymer (ADA) was obtained from an ethynyl‐functionalized adamantane derivative and 2,5‐dibromoterephthalic acid through Sonogashira–Hagihara cross‐coupling. ADA had two carboxyl groups which were used for Yb(III) coordination under basic conditions. The Brunauer‐Emmett‐Teller (BET) surface area of ADA was 970 m² g^?1. As Yb(III) ions were incorporated into ADA, the surface area of the polymer (Yb‐ADA) was reduced to 885 m² g^?1. However, Yb‐ADA exhibited a significantly enhanced CO₂ adsorption capacity despite the reduction of surface area. The CO₂ uptakes of ADA and Yb‐ADA were 1.56 and 2.36 mmol g^?1 at 298 K, respectively. The H₂ uptake of ADA also increased after coordination with Yb(III) from 1.15 to 1.40 wt % at 77 K. Yb‐ADA showed high catalytic activity in the acetalization of 4‐bromobenzaldehyde and furfural with trimethyl orthoformate and could be reused after recovery without severe loss of activity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5291–5297     

Potentiometric Anion Selectivity and Analytical Applications of Polymer Membrane Electrodes Based on Novel Mn(III)‐ and Mn(IV)‐Salophen Complexes

New Mn(III)‐L and Mn(IV)‐L complexes were prepared from the highly lipophilic salophen ligand (L): phenol 2,2′‐[(4,5‐dimethyl‐1,2‐phenylene)bis[(E)‐nitrilomethylidyne]]bis[4,6‐bis(1,1‐dimethylethyl). The prepared complexes were fully characterized and used for the construction of thiocyanate membrane electrodes. Optimized membrane electrodes contained 33.0 mg PVC, 66.0 mg o‐nitrophenyloctylether, 50 or 5 (mole %) tetrakis(trifluoromethyl)phenyl borate and 1 mg Mn(III)‐L (sensor 2) or Mn‐(IV)‐L (sensor 12), respectively. Such electrodes exhibited linear responses toward thiocynate in a concentration range of 10^?1–10^?5 M and detection limits of 8.3×10^?6, 8.9×10^?6 M for sensor 2 and 12, respectively. Optimized membrane electrodes exhbited high selectivty toward thiocayante compared to more lipophilic anions. The observed thiocyanate selectivity of the optimized membranes was confirmed by formation constant calculations for Mn(III)‐L and Mn(IV)‐L with SCN^?, β=10^14.1 and 10^12.5, which was measured potentiometrically using the sandwich membrane method. Furthermore, computational study using DFT calculations was performed to at DFT/B3LYP level of theory to confirm the observed selectivity data. The response times were 3 and 0.5 min for low and high concentrations. The lifetimes of the optimized electrodes were ～4–6 weeks. The analytical utility of the optimized membrane electrodes was demonstrated by the analysis of thiocyanate level in different saliva samples.     

A Crystalline Copper(II) Coordination Polymer for the Efficient Visible‐Light‐Driven Generation of Hydrogen

A crystalline coordination polymer (CP) photocatalyst (Cu‐RSH) which combines redox‐active copper centers with photoactive rhodamine‐derived ligands remains stable in acid and basic solutions from pH 2 to 14, and efficiently catalyzes dihydrogen evolution at a maximum rate of 7.88 mmol g^?1 h^?1 in the absence of a mediator and a co‐catalyst. Cyclic voltammetry, control experiments, and DFT calculations established that copper nodes with open coordination sites and favorable redox potentials, aided by spatially ordered stacking of rhodamine‐based linkers, account for the high catalytic performance of Cu‐RSH. Emission quenching, time‐resolved fluorescence decay, and transient photocurrent experiments disclosed the charge separation and transfer process in the catalytic system. The present study demonstrates the potential of crystalline copper CPs for the practical utilization of light.     

One‐dimensional Salen‐type Chain‐like Lanthanide(III) Coordination Polymers: Syntheses,Crystal Structures,and Fluorescence Properties

Four salen‐type lanthanide(III) coordination polymers [LnH₂L(NO₃)₃(MeOH)_x]_n [Ln = La ( 1 ), Ce ( 2 ), Sm ( 3 ), Gd ( 4 )] were prepared by reaction of Ln(NO₃)₃ · 6H₂O with H₂L [H₂L = N,N′‐bis(salicylidene)‐1,2‐cyclohexanediamine]. Single‐crystal X‐ray diffraction analysis revealed that H₂L effectively functions as a bridging ligand forming a series of 1D chain‐like polymers. The solid‐state fluorescence spectra of polymers 1 and 2 emit single ligand‐centered green fluorescence, whereas 3 exhibits typical red fluorescence of Sm^III ions. The lowest triplet level of ligand H₂L was calculated on the basis of the phosphorescence spectrum of Gd^III complex 4 . The energy transfer mechanisms in the lanthanide polymers were described and discussed.     

Photochemical Reduction of Low Concentrations of CO2 in a Porous Coordination Polymer with a Ruthenium(II)–CO Complex

Direct use of low pressures of CO₂ as a C1 source without concentration from gas mixtures is of great interest from an energy‐saving viewpoint. Porous heterogeneous catalysts containing both adsorption and catalytically active sites are promising candidates for such applications. Here, we report a porous coordination polymer (PCP)‐based catalyst, PCP‐Ru^II composite, bearing a Ru^II‐CO complex active for CO₂ reduction. The PCP‐Ru^II composite showed improved CO₂ adsorption behavior at ambient temperature. In the photochemical reduction of CO₂ the PCP‐Ru^II composite produced CO, HCOOH, and H₂. Catalytic activity was comparable with the corresponding homogeneous Ru^II catalyst and ranks among the highest of known PCP‐based catalysts. Furthermore, catalytic activity was maintained even under a 5 % CO₂/Ar gas mixture, revealing a synergistic effect between the adsorption and catalytically active sites within the PCP‐Ru^II composite.     

Syntheses,Crystal Structures,and Photophysical Properties of Heteronuclear Zinc(II)/Cadmium(II)‐Lanthanide(III) Coordination Complexes based on Benzoic Acid

The heteronuclear d‐f coordination complexes [Er₂Zn₂(C₆H₅COO)₁₀(phen)₂] (1), [Ho₂Zn₂(C₆H₅COO)₁₀(phen)₂] ( 2 ), [Pr₃Zn₆(C₆H₅COO)₂₁(phen)₃] ( 3 ), [ErCd(C₆H₅COO)₅(phen)·H₂O] ( 4 ), [Ho₂Cd₃(C₆H₅COO)₁₂(phen)₂] ( 5 ), [EuCd₂(C₆H₅COO)₇(phen)₂] ( 6 ) (C₆H₅COOH = benzoic acid;phen = 1,10‐phenanthroline) were synthesized by hydrothermal methods, and their structures were studied by single‐crystal X‐ray diffraction. Complexes 1 , 2 , 4 , and 5 crystallize in the triclinic space group P$\bar{1}$ and complexes 3 and 6 in the monoclinic space group C2/c. The room temperature IR, UV/Vis/NIR absorption, and emission spectra of the six complexes were determined and assigned. In the visible and NIR regions, the emission spectra of complexes show characteristic bands of corresponding Ln^III ions, which are attributed to the sensitization from the d block (Zn/Cd‐ligand section) and ligands. In comparison with isolated Ln^III ions, the NIR emission bands of complexes 1 – 5 exhibit shifting, broadening and splitting, which are also present in their UV/Vis/NIR absorption spectra. Thus, the two spectra of complexes can evidence each other.     

Crystalline Materials with Large Channels or Cavities – Synthesis and Crystal Structure of an Iron(III) tetra(4‐carboxyphenyl)‐porphine

Tetra(4‐carboxyphenyl)‐porphine iron(III) chloride · 2 CH₃COOH · 4 H₂O ( 1 ) was prepared via a hydrothermal synthesis approach starting from FeCl₂ and 5,10,15,20‐tetrakis‐(4‐carboxyphenyl)‐21 H,23 H‐porphine in glacial acetic acid in the presence of KOH as a base and ytterbium(III) acetate as a template. Compound 1 was characterized by single crystal X‐ray diffraction and elemental analysis. Space group: P 1, Z = 2, unit cell dimensions at 200 K: a = 9.282(2), b = 20.239(5), c = 22.239(5) Å, α = 92.49(3), β = 99.87(3), γ = 90.78(3)°, R₁ (observed) = 0.132, wR₂ (all data) = 0.395. The architecture of the structure is determined by interporphyrin hydrogen bonding. Four iron porphyrin units form a very wide open channel with dimensions of circa 15.7 Å × 15.7 Å. No interpenetrating is observed.     

Synthesis,Structures, Magnetic and Luminescent Properties of a Series of Iron(II) and Zinc(II) Coordination Frameworks with Versatile 4‐Substitued 1, 2,4‐Triazole Ligands

Three multi‐dentate 1, 2,4‐triazole derivative ligands containing different 4‐substituted groups, namely N‐1, 2,4‐triazol‐4‐yl(pyridin‐3‐yl)methylenimine (L₁), N‐1, 2,4‐triazol‐ 4‐yl(pyridin‐4‐yl)methylenimine (L₂), and 4‐(2‐pyridine)‐1, 2,4‐triazole (L₃) were used to isolate five iron(II) and zinc(II) coordination frameworks, [Zn(μ₂‐L₁)Cl₂] ( 1 ), [Zn(μ₂‐L₂)Br₂] ( 2 ), [Fe(L₁)₂(NCS)₂(H₂O)₂] ( 3 ), [Fe(L₃)₂(dca)₂(H₂O)₂] ( 4 ), and [Fe(L₃)₂(μ₂‐dca)] ( 5 ) (dca = dicyanamide anion). When different zinc(II) salts were used to react with L₁ and L₂ under solvothermal conditions, two one‐dimensional (1D) zinc(II) coordination frameworks 1 and 2 containing four‐coordinate central zinc(II) atoms were isolated. 1 is a 3D achiral supra‐molecular framework, whereas 2 is a 3D chiral supra‐molecular framework containing helical chains on a 2₁ axis. 3 is a mono‐nuclear iron(II) coordination framework containing six‐coordinate central Fe^II atoms. When L₃ was employed, mono‐nuclear iron(II) framework 4 and 1D iron(II) chain 5 could be isolated when different amounts of Nadca were introduced into the reaction system. Variable‐temperature magnetic susceptibility data of 3 – 5 were recorded in the 2–300 K temperature range indicating weak anti‐ferromagnetic interactions. The solid‐state luminescent properties of coordination polymers 1 and 2 were also investigated at room temperature.