Enhancing Multicomponent Metal–Organic Frameworks for Low Pressure Liquid Organic Hydrogen Carrier Separations

The resurgence of interest in the hydrogen economy could hinge on the distribution of hydrogen in a safe and efficient manner. Whilst great progress has been made with cryogenic hydrogen storage or liquefied ammonia, liquid organic hydrogen carriers (LOHCs) remain attractive due to their lack of need for cryogenic temperatures or high pressures, most commonly a cycle between methylcyclohexane and toluene. Oxidation of methylcyclohexane to release hydrogen will be more efficient if the equilibrium limitations can be removed by separating the mixture. This report describes a family of six ternary and quaternary multicomponent metal–organic frameworks (MOFs) that contain the three-dimensional cubane-1,4-dicarboxylate (cdc) ligand. Of these MOFs, the most promising is a quaternary MOF (CUB-30), comprising cdc, 4,4′-biphenyldicarboxylate (bpdc) and tritopic truxene linkers. Contrary to conventional wisdom that adsorptive interactions with larger, hydrocarbon guests are dominated by π–π interactions, here we report that contoured aliphatic pore environments can exhibit high selectivity and capacity for LOHC separations at low pressures. This is the first time, to the best of our knowledge, where selective adsorption for cyclohexane over benzene is witnessed, underlining the unique adsorptive behavior afforded by the unconventional cubane moiety.     

Ionic Liquids Supported on Metal‐Organic Frameworks: Remarkable Adsorbents for Adsorptive Desulfurization

Acidic ionic‐liquids (IL) supported on metal–organic frameworks (MOFs) have been shown to be beneficial for adsorptive desulfurization. A remarkable improvement in the adsorption capacity (ca. 71%) was observed in for ILs supported on MIL‐101 compared with virgin MIL‐101. The improved adsorptive performance might be explained by the acid–base interactions between the acidic ionic liquid and basic benzothiophene (BT). Moreover, from this study, it can be suggested that porous MOFs, supported with ionic liquids, may introduce a new class of highly porous adsorbents for the efficient adsorption of various compounds.     

Unusual Regenerable Porous Metal–Organic Framework Based on a New Triple Helical Molecular Necklace for Separating Organosulfur Compounds

Desulfurization of fuels is receiving more and more attention all over the world due to the increase of stringent environmental regulations and fuel specifications. The metal–organic framework (MOF) is a new class of crystalline materials, and high porosity, one of the most important properties of MOFs, plays a central role in the functional properties. However, the investigation of MOFs, being employed as sorbents for adsorptive desulfurization, is still scarce. In this regard, we have constructed a new 3D porous compound 1 by using rigidly designed carboxylate ligands, which, for the first time, exhibit an unusual triple molecular necklace‐like helix. The N₂ sorption isotherms of 1 show that it has a large Brunauer–Emmett–Teller (BET) surface area and pore volume. With the stable pore structure and appropriate pore sizes, compound 1 has been used as a sorbent for adsorptive desulfurization. The results indicate that compound 1 shows an excellent adsorption property and, more importantly, displays excellent stability, repeatability, and regenerability. Thus, the design and synthesis of targeted MOFs with appropriate pore size and increased interactions between organosulfur compounds and ligands/metals from MOFs is crucial for adsorptive desulfurization, which might be an effective guide to find an efficient and green adsorbent for desulfurization.     

Tritopic Triazatruxene Ligands for Multicomponent Metal‐Organic Frameworks

Multicomponent metal‐organic frameworks (MOFs) are built up from multiple ligands that are geometrically distinct. These ligands occupy specific positions in the MOF lattice. Installing different functionalities at precise locations in the framework is an important step in making MOFs for specific applications. This can be achieved by designing functionalized ligands for multicomponent MOFs. Here, we report a simple synthetic procedure for a new tritopic triazatruxene based tricarboxylic acid, H₃tat. We show that this ligand can be symmetrically derivatized with various substituents on its nitrogen centres. We report a new isoreticular series of well‐ordered quaternary MOFs based on these new triazatruxene ligands together with two linear carboxylate ligands and Zn₄O clusters. These MOFs are isostructural to the previously reported MUF‐77 series and show similar high surface areas and large pore volumes. Furthermore, H‐bonding between the NH sites of the incorporated triazatruxene ligands and guest molecules is employed to modify their fluorescence behavior.     

Expanded Organic Building Units for the Construction of Highly Porous Metal–Organic Frameworks

Two new organic building units that contain dicarboxylate sites for their self‐assembly with paddlewheel [Cu₂(CO₂)₄] units have been successfully developed to construct two isoreticular porous metal–organic frameworks (MOFs), ZJU‐35 and ZJU‐36, which have the same tbo topologies (Reticular Chemistry Structure Resource (RCSR) symbol) as HKUST‐1. Because the organic linkers in ZJU‐35 and ZJU‐36 are systematically enlarged, the pores in these two new porous MOFs vary from 10.8 Å in HKUST‐1 to 14.4 Å in ZJU‐35 and 16.5 Å in ZJU‐36, thus leading to their higher porosities with Brunauer–Emmett–Teller (BET) surface areas of 2899 and 4014 m² g^?1 for ZJU‐35 and ZJU‐36, respectively. High‐pressure gas‐sorption isotherms indicate that both ZJU‐35 and ZJU‐36 can take up large amounts of CH₄ and CO₂, and are among the few porous MOFs with the highest volumetric storage of CH₄ under 60 bar and CO₂ under 30 bar at room temperature. Their potential for high‐pressure swing adsorption (PSA) hydrogen purification was also preliminarily examined and compared with several reported MOFs, thus indicating the potential of ZJU‐35 and ZJU‐36 for this important application. Studies show that most of the highly porous MOFs that can volumetrically take up the greatest amount of CH₄ under 60 bar and CO₂ under 30 bar at room temperature are those self‐assembled from organic tetra‐ and hexacarboxylates that contain m‐benzenedicarboxylate units with the [Cu₂(CO₂)₄] units, because this series of MOFs can have balanced porosities, suitable pores, and framework densities to optimize their volumetric gas storage. The realization of the two new organic building units for their construction of highly porous MOFs through their self‐assembly with [Cu₂(CO₂)₄] units has provided great promise for the exploration of a large number of new tetra‐ and hexacarboxylate organic linkers based on these new organic building units in which different aromatic backbones can be readily incorporated into the frameworks to tune their porosities, pore structures, and framework densities, thus targeting some even better performing MOFs for very high gas storage and efficient gas separation under high pressure and at room temperature in the near future.     

Impact of Higher‐Order Structuralization on the Adsorptive Properties of Metal–Organic Frameworks

The structural processing of metal–organic frameworks (MOFs) over multiple length scales is critical for their successful use as adsorbents in a variety of emerging applications. Although significant advances in molecular‐scale design have provided strategies to boost the adsorptive capacities of MOFs, relatively little attention has been directed toward understanding the influence of higher‐order structuralization on the material performance. Herein, we present the main strategies that are currently available for the structural processing of MOFs and discuss the influence these processes can impart on the adsorptive properties of the materials. In all, this intriguing area of research is expected to provide significant opportunities to enhance the properties of MOFs further, which will ultimately aid in their optimization in the context of specific real‐world applications.     

Adsorption on Mesoporous Metal–Organic Frameworks in Solution: Aromatic and Heterocyclic Compounds

Adsorption and desorption play major roles in separations, purification of water, waste streams, liquid fuels, catalysis, biomedicine and chromatography. Mesoporous metal–organic frameworks (MOFs) with pore sizes 2–50 nm are particularly suitable for adsorption of organic compounds in solution. Tens of thousands of aromatic and heterocyclic compounds are major components of liquid fuels, feedstock for industrial synthesis, solvents, dyestuffs, agricultural chemicals, medicinal drugs, food additives, and so forth. This Review provides a systematization and analysis of studies on adsorption/desorption on mesoporous MOFs in solution and their underlying chemical mechanisms. The (in)stability of mesoporous MOFs in water is critically discussed. Adsorption capacity and selectivity are covered for organic dyes, medicinal drugs, major components of liquid fuels, and miscellaneous industrial chemicals. Ionic interactions, Brønsted acid–base interactions, hydrogen bonding, coordination bonding, π–π interactions, and non‐specific interactions are covered amongst adsorption mechanisms. The effects of post‐synthetic modifications of mesoporous MOFs on their stability, adsorption capacity, selectivity, and mechanisms of adsorption and desorption are analyzed. To encourage research in this quickly growing field, we identify “niches” for which no application‐oriented and/or mechanistic studies were reported. Perspectives and limitations of a wide use of mesoporous MOFs as industrial sorbents are discussed.     

Microporous Metal–Organic Frameworks for Gas Separation

Microporous metal–organic frameworks (MOFs) are comparatively new porous materials. Because the pores within such MOFs can be readily tuned through the interplay of both metal‐containing clusters and organic linkers to induce their size‐selective sieving effects, while the pore surfaces can be straightforwardly functionalized to enforce their different interactions with gas molecules, MOF materials are very promising for gas separation. Furthermore, the high porosities of such materials can enable microporous MOFs with optimized gas separation selectivity and capacity to be targeted. This Focus Review highlights recent significant advances in microporous MOFs for gas separation.     

A Hydrophobic Metal–Organic Framework Based on Cubane‐Type [Co4(μ3‐F)3(μ3‐SO4)]3+ Clusters for Gas Storage and Adsorption Selectivity of Benzene over Cyclohexane

Hydrophobic metal‐organic frameworks (MOFs) not only have high water stability, but also exhibit high adsorption capacity towards organic molecules, in particular hydrocarbons. Herein we report a rare metal fluoride organic framework MFOF‐1 with high hydrophobicity, which is constructed from unprecedented fluoride‐ and sulfate‐bridged cubane‐type tetranuclear cobalt clusters. MFOF‐1 consists of three types of polyhedral cages with face‐sharing configurations, and possesses a novel (3,9)‐connected 3D+3D→3D self‐interpenetrating array or the rare pyr topology. MFOF‐1 shows high thermal stability and high stability in water and even acid/base aqueous solutions, and exhibits rather high H₂ and CO₂ storage capacities at ambient pressure. Remarkably, MFOF‐1 shows little adsorption of water but considerably high uptakes of methanol, n‐hexane, cyclohexane, and benzene, and exhibits a certain degree of adsorption selectivity of benzene over cyclohexane.     

Tuning Hydrogen Sorption Properties of Metal–Organic Frameworks by Postsynthetic Covalent Modification

Postsynthetic modification is presented as a means to tune the hydrogen adsorption properties of a series of metal–organic frameworks (MOFs). IRMOF‐3 (isoreticular metal–organic framework), UMCM‐1‐NH₂ (University of Michigan crystalline material), and DMOF‐1‐NH₂ (DABCO metal–organic framework) have been covalently modified with a series of anhydrides or isocyanates and the hydrogen sorption properties have been studied. Both the storage capacities and isosteric heats of adsorption clearly show that covalent postsynthetic modification can significantly enhance the sorption affinity of MOFs with hydrogen and in some cases increase both gravimetric and volumetric uptake of the gas as much as 40 %. The significance of the present study is illustrated by: 1) the nature of the substituents introduced by postsynthetic modification result in different effects on the binding of hydrogen; 2) the covalent postsynthetic modification approach allows for systematic modulation of hydrogen sorption properties; and 3) the ease of postsynthetic modification of MOFs allows a direct evaluation of the interplay between MOF structure, hydrogen uptake, and heat of adsorption. The findings presented herein show that postsynthetic modification is a powerful method to manipulate and better understand the gas sorption properties of MOFs.     

Recent Approaches to Design Electrocatalysts Based on Metal–Organic Frameworks and Their Derivatives

Rational design and synthesis of efficient electrocatalysts are important constituents in addressing the currently growing provision issues. Typical reactions, which are important to catalyze in this respect, include CO₂ reduction, the hydrogen and oxygen evolution reactions as well as the oxygen reduction reaction. The most efficient catalysts known up‐to‐date for these processes usually contain expensive and scarce elements, substantially impeding implementation of such electrocatalysts at a larger scale. Metal‐organic frameworks (MOFs) and their derivatives containing affordable components and building blocks, as an emerging class of porous functional materials, have been recently attracting a great attention thanks to their tunable structure and composition together with high surface area, just to name a few. Up to now, several MOFs and MOF‐derivatives have been reported as electrode materials for the energy‐related electrocatalytic application. In this review article, we summarize and analyze current approaches to design such materials. The design strategies to improve the Faradaic efficiency and selectivity of these catalysts are discussed. Last but not least, we discuss some novel strategies to enhance the conductivity, chemical stability and efficiency of MOF‐derived electrocatalysts.     

Tailor‐Made Metal–Organic Frameworks from Functionalized Molecular Building Blocks and Length‐Adjustable Organic Linkers by Stepwise Synthesis

In this work, we have demonstrated a family of diamondoid metal–organic frameworks (MOFs) based on functionalized molecular building blocks and length‐adjustable organic linkers by using a stepwise synthesis strategy. We have successfully achieved not only “design” and “control” to synthesize MOFs, but also the functionalization of both secondary building units (SBUs) and organic linkers in the same MOF for the first time. Furthermore, the results of N₂ and H₂ adsorption show that their surface areas and hydrogen uptake capacities are determined by the most optimal combination of functional groups from SBUs and organic linkers, interpenetration, and free volume in this system. A member of this series, DMOF‐6 exhibits the highest surface area and H₂ adsorption capacity among this family of MOFs.     

Design and Synthesis of a Water‐Stable Anionic Uranium‐Based Metal–Organic Framework (MOF) with Ultra Large Pores

Ionic metal–organic frameworks (MOFs) are a subclass of porous materials that have the ability to incorporate different charged species in confined nanospace by ion‐exchange. To date, however, very few examples combining mesoporosity and water stability have been realized in ionic MOF chemistry. Herein, we report the rational design and synthesis of a water‐stable anionic mesoporous MOF based on uranium and featuring tbo‐type topology. The resulting tbo MOF exhibits exceptionally large open cavities (3.9 nm) exceeding those of all known anionic MOFs. By supercritical CO₂ activation, a record‐high Brunauer‐Emmett‐Teller (BET) surface area (2100 m² g^?1) for actinide‐based MOFs has been obtained. Most importantly, however, this new uranium‐based MOF is water‐stable and able to absorb positively charged ions selectively over negatively charged ones, enabling the efficient separation of organic dyes and biomolecules.     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.     

Water Stable Zr–Benzenedicarboxylate Metal–Organic Frameworks as Photocatalysts for Hydrogen Generation

The Zr‐containing metal–organic frameworks (MOFs) formed by terephthalate (UiO‐66) and 2‐aminoterephthalate ligands [UiO‐66(NH₂)] are two notably water‐resistant MOFs that exhibit photocatalytic activity for hydrogen generation in methanol or water/methanol upon irradiation at wavelength longer than 300 nm. The apparent quantum yield for H₂ generation using monochromatic light at 370 nm in water/methanol 3:1 was of 3.5 % for UiO‐66(NH₂). Laser‐flash photolysis has allowed detecting for UiO‐66 and UiO‐66(NH₂) the photochemical generation of a long lived charge separated state whose decay is not complete 300 μs after the laser flash. Our finding and particularly the influence of the amino group producing a bathochromic shift in the optical spectrum without altering the photochemistry shows promises for the development of more efficient MOFs for water splitting.     

Transformation of Metal‐Organic Frameworks into Stable Organic Frameworks with Inherited Skeletons and Catalytic Properties

Metal‐organic frameworks (MOFs) are an emerging class of porous materials with attractive properties, however, their practical applications are heavily hindered by their fragile nature. We report herein an effective strategy to transform fragile coordination bonds in MOFs into stable covalent organic bonds under mild annealing decarboxylative coupling reaction conditions, which results in highly stable organic framework materials. This strategy successfully endows intrinsic framework skeletons, porosity and properties of the parent MOFs in the daughter organic framework materials, which exhibit excellent chemical stability under harsh catalytic conditions. Therefore, this work opens a new avenue to synthesize stable organic framework materials derived from MOFs for applications in different fields.     

Chiral Metal–Organic Frameworks Bearing Free Carboxylic Acids for Organocatalyst Encapsulation

Two chiral carboxylic acid functionalized micro‐ and mesoporous metal–organic frameworks (MOFs) are constructed by the stepwise assembly of triple‐stranded heptametallic helicates with six carboxylic acid groups. The mesoporous MOF with permanent porosity functions as a host for encapsulation of an enantiopure organic amine catalyst by combining carboxylic acids and chiral amines in situ through acid–base interactions. The organocatalyst‐loaded framework is shown to be an efficient and recyclable heterogeneous catalyst for the asymmetric direct aldol reactions with significantly enhanced stereoselectivity in relative to the homogeneous organocatalyst.     

Hydrogen‐Bonded Organic Frameworks (HOFs): A New Class of Porous Crystalline Proton‐Conducting Materials

Two porous hydrogen‐bonded organic frameworks (HOFs) based on arene sulfonates and guanidinium ions are reported. As a result of the presence of ionic backbones appended with protonic source, the compounds exhibit ultra‐high proton conduction values (σ) 0.75× 10^?2 S cm^?1 and 1.8×10^?2 S cm^?1 under humidified conditions. Also, they have very low activation energy values and the highest proton conductivity at ambient conditions (low humidity and at moderate temperature) among porous crystalline materials, such as metal–organic frameworks (MOFs) and covalent organic frameworks (COFs). These values are not only comparable to the conventionally used proton exchange membranes, such as Nafion used in fuel cell technologies, but is also the highest value reported in organic‐based porous architectures. Notably, this report inaugurates the usage of crystalline hydrogen‐bonded porous organic frameworks as solid‐state proton conducting materials.     

Two‐Dimensional Metal‐Organic Layers for Electrochemical Acceptorless Dehydrogenation of N‐Heterocycles

The catalytic acceptorless dehydrogenation (CAD) is an attractive synthetic route to unsaturated compounds because of its high atomic efficiency. Here we report electrochemical acceptorless dehydrogenation of N‐heterocycles to obtain quinoline or indole derivatives using metal‐organic layer (MOL) catalyst. MOL is the two‐dimensional version of metal‐organic frameworks (MOF), and it can be constructed on conductive multi‐walled carbon nanotubes via facile solvothermal synthesis to overcome the conductivity constraint for MOFs in electrocatalysis. TEMPO‐OPO₃^2? was incorporated into the system through a ligand exchange with capping formate on the MOL surface to serve as the active catalytic centers. The hybrid catalyst is efficient in the organic conversion and can be readily recycled and reused.     

Separation of Aromatics/Cyclic Aliphatics by Nonporous Adaptive Pillararene Crystals

The separation of cyclic aliphatics of high purity, which are produced from hydrogenation of the corresponding aromatics, is highly desired in the chemical industry. An energy‐efficient and environmentally friendly adsorptive separation method using nonporous adaptive crystals of perethylated pillar[5]arene (EtP5) and pillar[6]arene (EtP6) is described. Adaptive EtP5 crystals separate toluene from methylcyclohexane with 98.8 % purity, while adaptive EtP6 crystals separate methylcyclohexane from toluene with 99.2 % purity. The selectivities come from the stability of new EtP5 and EtP6 crystal structures upon capture of toluene and methylcyclohexane, respectively. The reversible transformations between nonporous guest‐free EtP5 or EtP6 structures and guest‐loaded structures make them highly recyclable.