Sensing System Integrating Lanthanum Hydroxide Nanowires with Copper(II) Ion for Uracil and its Application

Abstract

A sensing system for uracil was constituted by using lanthanum hydroxide nanowires (LNW) as a modifier to obtain LNW modified carbon paste electrode (LNW/CPE) and by introducing copper(II) ion into supporting electrolyte to transform electroinactive uracil to electroactive uracil‐Cu(II) complex. The voltammetric behaviors of uracil in the presence of Cu(II) ion at LNW/CPE were investigated. A reduction peak of the uracil‐Cu(II) complex at ?0.18 V was the two‐electron reduction of Cu(II) ion in the uracil‐Cu(II) complex; while a new oxidation peak at 0.22 V was the one‐electron oxidation of the uracil‐Cu(I) complex. Additionally, the voltammetric responses of all the complexes at LNW/CPE were more sensitive than that at carbon and multiwall carbon nanotube paste electrodes, which resulted from both the large surface effect of LNW and the chemical coordination of uracil with La(III) ion in LNW. With the sensitive oxidation peak of the uracil‐Cu(I) complex at LNW/CPE, a linear range of 4.0×10^?9?3.0×10^?8 mol/l for uracil was obtained along with a detection limit of 2.0×10^?10 mol/l. The proposed system was evaluated by the determination of uracil derivatives, anticancer drug 5‐flurouracil, in pharmaceutical preparations.     

Complexation of N-tris[(1,2-dicarboxyethoxy)ethyl]amine with Ca(II), Mn(II), Cu(II) and Zn(II) in aqueous solution

In a search for environmentally friendly metal chelating ligands for industrial applications, the protonation and complex formation equilibria of N-tris[(1,2-dicarboxyethoxy)ethyl]amine (TCA6) with Ca(II), Mn(II), Cu(II) and Zn(II) ions in aqueous 0.1?M NaCl solution were studied at 25°C by potentiometric titration. A model for complexation and stability constants of the complexes were determined. With all of the metals, complex formation was dominated by ML^4?. Comparison of TCA6 and six other chelating agents showed TCA6 to be suitable for applications where strong calcium binding is essential.     

Application of Multivariate Calibration Methods for the Simultaneous Multiwavelength Spectrophotometric Determination of Fe(II), Cu(II), Zn(II), and Mn(II) in Mixtures

Abstract

A sensitive method for the simultaneous spectrophotometric determination of Fe(II), Cu(II), Zn(II), and Mn(II) in mixtures has been developed with the aid of multivariate calibration methods, such as classical least squares (CLS), principal component regression (PCR) and partial least squares (PLS). The method is based on the spectral differences of the analytes in their complexation reaction with 4‐(2‐pyridylazo)‐resorcinol (PAR) and the use of full spectra with wavelengths in the range of 300–600 nm. It was found that both the spectral positive and negative bands obtained against the PAR blank, are proportional to the concentration for each metal complex. The obtained linear calibration concentration ranges are 0.025–0.6, 0.05–0.8, 0.025–0.8, and 0.05–0.8 µg ml^?1 for Fe(II), Cu(II), Zn(II), and Mn(II), respectively, and the LODs for the four metal ions were found to be approximately 1–3×10^?2 µg ml^?1. The proposed method was applied to a verification set of synthetic mixtures of these four metal ions, with models built in three different wavelength ranges, i.e., 300–450, 450–600, and 300–600 nm, corresponding to the positive, negative bands and their combinations, respectively. It was shown that the PLS model for the 300–600 nm range gave the best results (RPE_T=6.9% and average recovery ～100%; cf. PCR: RPE_T=9.5% and average Recovery ～110%). This method was also successfully applied for the determination of the four metal ions in pharmaceutical preparations, chicken feedstuff, and water samples.     

Synthesis,characterization and anticancer studies of bis-(N-methyl-1-phenyldithiocarbamato) Cu(II), Zn(II), and Pt(II) complexes: single crystal X-ray structure of the copper complex

Abstract

Cu(II), Pt(II), and Zn(II) complexes of N-methyl-1-phenyldithiocarbamate were synthesized and characterized by FTIR, NMR, UV-visible spectroscopy and elemental analysis. The complexes were formulated as [Cu(L)₂], [Zn(L)₂] and [Pt(L)₂] (where L?=?N-methyl-1-phenyldithio­carbamate) in which two molecules of the ligands coordinate to the metal ions in a bidentate chelating fashion. This is confirmed by elemental analysis and the presence of strong single bands at 952, 951, and 955?cm^?1 for Cu(II), Pt(II), and Zn(II) complexes, respectively, in the FTIR spectra. The electronic spectra of Pt(II) and Cu(II) complexes are consistent with four-coordinate square planar geometry. Single crystal X-ray of [Cu(N-mpDTC)₂] confirmed square planar structural arrangement (CuS₄) in which the ligands are asymmetrically bonded to the Cu(II) ion building a centrosymmetric monomer entity. The S-Cu-S bite angle is 77.95° (3) whereas the intramolecular N–C bond length is 1.318 Å and trans S1¹-Cu-S1?=?S2¹-Cu-S2 is 180°, which are consistent with reported copper thiolates in square planar environment. In vitro antiproliferative activity of the complexes against three human cancer cell lines showed that the zinc complex has better activity compared to Cu and Pt complexes, with IC₅₀ values of 14.28, 22.74 and 20.10?μM against TK10, UACC62, and MC7 cell lines, respectively.     

Determination of L-cysteine base on the reversion of fluorescence quenching of calcein by copper(II) ion

We report on a simple and sensitive method for the determination of L-cysteine (Cys). It is based on a redox reaction between the non-fluorescent Cu(II)-calcein complex and Cys which results in fluorescence recovery of calcein. When Cys is added to a solution of the Cu(II)-calcein complex, Cu(II) is reduced to Cu(I), and calcein is released to form a strongly fluorescent complex with Zn(II). The effect was used to develop a fluorescence enhancement method for the determination of Cys. Under the optimum conditions, the increase in signal intensity is linear in the range from 3.0?×?10^?7 to 1.2?×?10^?5?mol?L^?1, with a correlation coefficient (R) of 0.9978. The limit of detection (3σ) is 4.0?×?10^?8?mol?L^?1. The relative standard deviation (RSD) in the determination of 11 samples containing 5.0?×?10^?6?mol?L^?1 of Cys was 3.5%. There is little interference by common ions and other amino acids. The method, which is simple, rapid, and sensitive, was successfully applied to the determination of Cys in human serum samples.

A Novel Fluorescent Aminoacid Designed for Fluorometric Detection of Cu （Ⅱ）

A fluorescent aminoacid was designed for selective and sensitive detection of Cu(II) in aqueous solution. The designing of this Cu(II) fluorescent chemosensing molecule, N ± (1‐naphthyl). aminoacetic acid (NAA), was based on the binding of Cu(II) to aminoacetic acid and the novel charge transfer photophysics of 1‐aminonaphthalenes. The fluorescence of NAA was found quenched by Cu (II) and several other metal ions of similar electronic structure such as Co(II), Ni(II) and Zn(II). The quenching was shown to occur via electron transfer within the metal‐NAA complex, which required an optimal combination of high binding affinity and favorable redox properties of the components in the metal‐NAA complex and hence afforded selective fluorometric detection of Cu(II). The calibration graph obeyed Stern‐Volmer theory and was shown for Cu(II) over the range of 0–2.75 ± 10–⁴ mol/L. The quenching constant of Cu(II) was measured as 8.0 ± 10³ mol/L that was two orders of magnitude higher than those of Co(II), Ni(II) and Zn(II). The 3SD limit of detection for Cu(II) was 8.00 ± 10^?6 mol/L with a coefficient of variation of 1.65%. Linear range for quantitative detection of Cu(II) was 2.67 ± 10^?5‐2.75 ± 10^?4 mol/L. The method was applied to synthetic sample measurements which gave recoveries of 105%‐112%.     

Cold Deposition as a Novel Procedure for the Preparation of Titania Sol‐Gel: A Development of a High Sensitive Electrochemical Method for Determination of Cu(II) in the Presence of Arsenic(III)

Titania sol‐gel modified gold electrode (TSGMGE) was prepared with the usage of a new proposed cold deposition method at ?10 °C. Scanning electron microscope (SEM) operating at 30 kV was used to obtain micrographs of unmodified and modified electrodes. The obtained results showed that this procedure yields a sol‐gel with high porosity in comparison to conventional methods. The modified Au electrode was fabricated by trapping the L‐glutamine in titania sol‐gel at low temperatures to preparation of a new titania sol‐gel glutamine modified gold electrode (TSGGMGE). The possibility determination of traces of Cu(II) in the presence of As(III) was investigated using proposed electrode. Under the optimized conditions, copper was accumulated at ?0.35 V (vs. Ag/AgCl) for 40 s in 0.1 M acetate buffer (pH 4.0) in the presence of different amounts of arsenic. Two dynamic linear responses with good reproducibility were observed for copper ions in the concentration range of 1 × 10^?6 ?4 × 10^?4 M and 4 × 10^?8 ?6 × 10^?7 M.     

Heteronuclear complexes of oxorhenium(V) with Fe(III), Co(II), Ni(II), Cu(II), Cd(II) and UO2(VI) and their biological activities

Heteronuclear complexes containing oxorhenium(V), with Fe(III), Co(II), Ni(II), Cu(II), Cd(II) and UO₂(VI) ions were prepared by the reaction of the complex ligands [ReO(HL¹)(PPh₃)(OH₂)Cl]Cl (a) and/or [ReO(H₂L²)(PPh₃)(OH₂)Cl]Cl (b), where H₂L¹?=?1-(2-hydroxyphenyl)butane-1,3-dione-3-(5,6-diphenyl-1,2,4-triazine-3-ylhydrazone) and H₃L²?=?1-(2-hydroxyphenyl)butane-1,3-dione-3-(1H-benzimidazol-2-ylhydrazone), with transition and actinide salts. Heterodinuclear complexes of ReO(V) with Fe(III), Co(II), Ni(II), Cu(II) and Cd(II) were obtained using a 1?:?1 mole ratio of the complex ligand and the metal salt. Heterotrinuclear complexes were obtained containing ReO(V) with UO₂(VI) and Cu(II) using 2?:?1 mole ratios of the complex ligand and the metal salts. The complex ligands a and b coordinate with the heterometal ion via a nitrogen of the heterocyclic ring and the nitrogen atom of the C=N⁷ group. All transition metal cations in the heteronuclear complexes have octahedral configurations, while UO₂(VI)?complexes have distorted dodecahedral geometry. The structures of the complexes were elucidated by IR, ESR, electronic and ¹H NMR spectra, magnetic moments, conductance and TG-DSC measurements. The antifungal activities of the complex ligands and their heteronuclear complexes towards Alternaria alternata and Aspergillus niger showed comparable behavior with some well-known antibiotics.     

Automated Determination of Cu(II), Pb(II), Cd(II) and Zn(II) in Environmental Samples by Square Wave Voltammetry Exploiting Sequential Injection Analysis and Screen Printed Electrodes

This paper describes the development of a methodology for quantification of Cu(II), Pb(II), Cd(II) and Zn(II) in waters and sediments by anodic stripping voltammetry (ASV) automated by Sequential Injection Analysis (SIA) using a graphite screen printed sensor modified with mercury. Determinations were made by standard addition automated by the SIA system. The limits of detection and quantification were, respectively, 1.3 and 4.3 µg L^?1 for Cu(II), 1.4 and 4.6 µg L^?1 for Pb(II), 0.6 and 1.8 µg L^?1 for Cd(II) and 4.2 and 14 µg L^?1 for Zn(II). These limits were obtained for a sample volume of 1000 µL, flow rate of 10 µL s^?1 (during the deposition step), and utilizing 3 flow reversals (volume of reversion=950 µL), totalizing a deposition time of 315 s. The potentiostat worked synchronically with the SIA system applying the conditioning potential of ?0.1 V vs. pseudo reference of Ag (100 s), deposition potential of ?1.0 V for Cu(II), Pb(II) and Cd(II) or ?1,3 V for Zn(II), square wave frequency of 100 Hz, potential step of 6 mV and pulse height of 40 mV. For quantification of Zn(II) in sediment extracts, deposition of Ga⁰ on the working electrode was necessary to avoid the formation of intermetallic between Zn⁰ and Cu⁰. The accuracy of the method was assessed by spike and recovery experiments in water samples which resulted recovery rates near 100 % of the spiked concentrations. Recoveries of concentrations in the certified sediment sample CRM‐701 undergoing the three steps sequential extraction procedure of BCR varied from 71.7 % for Zn(II) in the acetic acid extract to 112.4 % for Cu(II) in the oxidisable fraction, confirming that the standard addition approach corrected the matrix effects in the complex samples of sediment extracts.     

Determination of copper(II) in a complex matrix after prereduction to copper(I) in a flow-injection system with an amperometric detector

A flow-injection system with a carbon paste detector is proposed for the determination of copper in complex media at +0.050 V vs. Ag/AgCl. Both the reduction current peak of Cu(II) and the oxidation peak of Cu(I) (obtained in the presence of hydroxylamine in the reagent stream) were proportional to the Cu(II) concentration in the original sample. The stabilization of Cu(I) in the hydroxylamine system provides a novel approach; the inherent repeatability of operation of flow-injection systems (timing, etc.) proved ideal for this utilization. Acidified Cu(II) samples containing additional metal ions [Fe(lI), Zn(II), Pb(II)] and relatively high concentrations of serum albumin were analysed. A chelating column retained heavy metal ions while allowing albumin to run to waste. The retained metals were subsequently eluted with nitric acid into a stream of sodium acetate or sodium acetate-hydroxyl- amine. Before reaching the detector, the pH of the sample plug was adjusted. With the hydroxylamine system, Fe(III) interference was minimized and the sensitivity and reproducibility were improved. The sample throughput was 25 h^?1. National Bureau of Standards Standard Reference Material 909 Human Serum was used to test the method.     

Synthesis,characterization and in vitro biological activity of cobalt(II), copper(II) and zinc(II) Schiff base complexes derived from salicylaldehyde and D,L‐selenomethionine

New cobalt(II), copper(II) and zinc(II) complexes of Schiff base derived from D,L ‐selenomethionine and salicylaldehyde were synthesized and characterized by elemental analysis, IR, electronic spectra, conductance measurements, magnetic measurements and biological activity. The analytical data showed that the Schiff base ligand acts as tridentate towards divalent metal ions (cobalt, copper, zinc) via the azomethine‐N, carboxylate oxygen and phenolato oxygen by a stoichiometric reaction of M:L (1:1) to form metal complexes [ML(H₂O)], where L is the Schiff base ligand derived from D,L ‐selenomethionine and salicylaldehyde and M = Co(II), Cu(II) and Zn(II). ¹H NMR spectral data of the ligand and Zn(II) complex agree with proposed structures. The conductivity values between 12.87 and 15.63 S cm² mol^?1 in DMF imply the presence of non‐electrolyte species. Antibacterial and antifungal results indicate that the metal complexes are more active than the ligand. Copyright © 2010 John Wiley & Sons, Ltd.     

Spectral and Thermal Studies of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) Complexes with 3-methylglutaric Acid

Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) 3-methylglutarates were prepared as solids with general formula MC₆ H₈ O₄ ×n H₂ O, where n =0–8. Their solubilities in water at 293 K were determined (7.0×10⁻² −4.2×10⁻³ mol dm⁻³ ). The IR spectra were recorded and thermal decomposition in air was investigated. The IR spectra suggest that the carboxylate groups are mono- or bidentate. During heating the hydrated complexes lose some water molecules in one (Mn, Co, Ni, Cu) or two steps (Cd) and then mono- (Cu) or dihydrates (Mn, Co, Ni) decompose to oxides directly (Mn, Cu, Co) or with intermediate formation of free metals (Co, Ni). Anhydrous Zn(II) complex decomposes directly to the oxide ZnO. This revised version was published online in July 2006 with corrections to the Cover Date.     

Preparation,Properties and Thermal Decompositions of Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) Complexes of 2,5-dichlorobenzoic Acid

Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) 2,5-dichlorobenzoates were prepared and their compositions and solubilities in water at 295 K were determined. The IR spectra and X-ray diffractograms of the obtained complexes were recorded. The complexes of Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) were obtained as solids with a 1:2 molar ratio of metal to organic ligand and different degrees of hydration. When heated at a heating rate of 10 K min^-1, the hydrated complexes lose some (Co, Zn) or all (Ni, Cu, Cd) of the crystallization water molecules and then decompose to oxide MO (Co, Ni) or gaseous products (Cu, Zn, Cd). When heated at a heating rate of 5 K min^-1, the complexes of Ni(II) and Cu(II) lose some (Ni) or all (Cu) of the crystallization water molecules and then decompose directly to MO. This revised version was published online in July 2006 with corrections to the Cover Date.     

Pt‐Nanoparticle Incorporated Carbon Paste Electrode for the Determination of Cu(II) Ion by Anodic Stripping Voltammetry

Pt‐nanoparticles were synthesized and introduced into a carbon paste electrode (CPE), and the resulting modified electrode was applied to the anodic stripping voltammetry of copper(II) ions. The synthesized Pt‐nanoparticles were characterized by cyclic voltammetry, scanning electron microscopy and X‐ray photoelectron spectroscopy techniques to confirm the purity and the size of the prepared Pt‐nanoparticles (ca. 20 nm). This incorporated material seems to act as catalysts with preconcentration sites for copper(II) species that enhances the sensitivity of Cu(II) ions to Cu(I) species at a deposition potential of ?0.6 V in an aqueous solution. The experimental conditions, such as, the electrode composition, pH of the solution, pre‐concentration time, were optimized for the determination of Cu(II) ion using as‐prepared electrode. The sensitivity changes on the different binder materials and the presence of surfactants in the test solution. The interference effect of the coexisted metals were also investigated. In the presence of surfactants, especially TritonX‐100, the Cu(II) detection limit was lowered to 3.9×10^?9 M. However, the Pt‐nanoparticle modified CPE begins to degrade when the period of deposition exceeds to 10 min. Linear response for copper(II) was found in the concentration range between 3.9×10^?8 M and 1.6×10^?6 M, with an estimated detection limit of 1.6×10^?8 M (1.0 ppb) and relative standard deviation was 4.2% (n=5).     

Synthesis,Spectral, Thermal Studies of Co(II), Ni(II), Cu(II) and Zn(II)‐arginato Complexes. Crystal Structure of Monoaquabis(arginato‐κO,κN)copper(II). [Cu(arg)2(H2O)].NaNO3

Transition metal complexes of arginine (using Co(II), Ni(II), Cu(II) and Zn(II) cations separately) were synthesized and characterized by FTIR, TG/DTA‐DrTG, UV‐Vis spectroscopy and elemental analysis methods. Cu(II)‐Arg complex crystals was found suitable for x‐ray diffraction studies. It was contained, one mole Cu^II and Na⁺ ions, two arginate ligands, one coordinated aqua ligand and one solvent NO₃^? group in the asymmetric unit. The principle coordination sites of metal atom have been occupied by two N atoms of arginate ligands, two carboxylate O atoms, while the apical site was occupied by one O atom for Cu^II cation and two O atoms for Co^II, Ni^II, Zn^II atoms of aqua ligands. Although Cu^II ion adopts a square pyramidal geometry of the structure. Co^II, Ni^II, Zn^II cations have octahedral due to coordination number of these metals. Neighbouring chains were linked together to form a three‐dimensional network via hydrogen‐bonding between coordinated water molecule, amino atoms and O atoms of the bridging carboxylate groups. Cu^II complex was crystallized in the monoclinic space group P2₁, a = 8.4407(5) Å, b = 12.0976(5) Å, c = 10.2448(6) Å, V = 1041.03(10) ų, Z = 2. Structures of the other metal complexes were similar to CuII complex, because of their spectroscopic studies have in agreement with each other. Copper complex has shown DNA like helix chain structure. Lastly, anti‐bacterial, anti‐microbial and anti‐fungal biological activities of complexes were investigated.     

Silica gel surface modified with sulfanilamide for selective solid-phase extraction of Cu(II), Zn(II) and Ni(II)

A new chelating matrix has been prepared by immobilising sulfanilamide (SA) on silica gel (SG) surface modified with 3-chloropropyltrimethoxysilane as a sorbent for the solid-phase extraction (SPE) Cu(II), Zn(II) and Ni(II). The determination of metal ions in aqueous solutions was carried out by inductively coupled plasma optical emission spectrometry (ICP-OES). Experimental conditions for effective sorption of trace levels of Cu(II), Zn(II) and Ni(II) were optimised with respect to different experimental parameters using the batch and column procedures. The presence of common coexisting ions does not affect the sorption capacities. The maximum sorption capacity of the sorbent at optimum conditions was found to be 34.91, 19.07 and 23.62 mg g^?1 for Cu(II), Zn(II) and Ni(II), respectively. The detection limit of the method defined by IUPAC was found to be 1.60, 0.50 and 0.61 µg L^?1 for Cu(II), Zn(II) and Ni(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was 4.0% (n = 8). The method was applied to the recovery of Cu(II), Zn(II) and Ni(II) from the certified reference material (GBW 08301, river sediment) and to the simultaneous determination of these cations in different water samples with satisfactory results.     

Indirect Determination of Sulfide by Extraction Flotation Spectrophotometry of Copper(II) with Ammonium Sulfate‐Ethanol‐Water System

A new extraction flotation spectrum method for indirect determination of trace amounts of sulfide by ammonium sulfate‐ethanol‐water system was developed. It showed that Cu(II) could combine with S^2? into precipitate (CuS) which was floated in the surface of ethanol and water in the presence of ammonium sulfate. The sulfide can be indirectly determined by determining the flotation yield of Cu(II). The linear range from 2.4 × 10^?8to 3.2 × 10^?6g/mL and the detect limit of 2.0 × 10^?8g/mL was achieved. The results showed the determination of S^2? was not affected by Pb(II), Zn(II), Cd(II), Fe(II), Co(II),Ni(II), Mn(II) and Cl^?, Br^?, I^?, etc. In the paper, the method was successfully applied to the determination of a trace amount of sulfide in polluted water samples with the advantages of simplicity of equipment, rapidity, low cost, etc.     

New Application of Chemically Modified Multiwalled Carbon Nanotubes with Thiosemicarbazide as a Sorbent for Separation and Preconcentration of Trace Amounts of Co(II), Cd(II), Cu(II), and Zn(II) in Environmental and Biological Samples Prior to Determination by Flame Atomic Absorption Spectrometry

The present article reports the application of Thiosemicarbazide‐modified multiwalled carbon nanotubes (MWCNTs‐TSC) as a new, easily prepared selective and stable solid sorbent for the preconcentration of trace Co(II), Cd(II), Cu(II) and Zn(II) ions in aqueous solution prior to the determination by flame atomic absorption spectrometry. The studied metal ions can be adsorbed quantitatively on MMWNTs at pH 5.0 and then eluted completely with HNO₃ (1.5 mol L^?1) prior to their determination by flame atomic absorption spectrometry. The separation/preconcentration conditions of analytes were investigated, including the pH, the sample flow rate and volume, the elution condition and the interfering ions. The maximum adsorption capacity of the adsorbent at optimum conditions were found to be 32.5, 27.3, 44.5 and 34.1 mg g^?1 for Co(II), Cd(II), Cu(II) and Zn(II), and the detection limits of the method were found to be 0.28, 0.13, 0.21 and 0.17 μg L^?1, respectively. The proposed method was successfully applied for extraction and determination of the analytes in well water, sea water, wastewater, soil, and blood samples.     

Water‐Exchange Mechanism for Zinc(II), Cadmium(II), and Mercury(II) Ions in Water as Studied by Umbrella‐Sampling Molecular‐Dynamics Simulations

Umbrella‐sampling molecular‐dynamics simulations were performed to investigate the water‐exchange reactions of zinc(II), cadmium(II), and mercury(II) ions in aqueous solution. The dissociation of a coordinating water molecule to the M? O distance at 3.34, 3.16, and 3.26 Å for Zn^II, Cd^II, and Hg^II, respectively, leads the system to a transition state. For Zn^II, the first hydration shell is occupied by five spectator water molecules in the transition state, indicating that the water‐exchange reaction proceeds via a dissociative mode of activation. In contrast, the number of spectator water molecules of 5.85 and 5.95 for Cd^II and Hg^II, respectively, suggests an associative exchange for these larger metal ions. The average M? O distance of the spectator molecules is shortened by 0.06 Å for the dissociative exchange of Zn^II, while it is elongated by 0.04 and 0.03 Å for Cd^II and Hg^II, respectively. The water‐exchange rate constants of 4.1×10⁸, 6.8×10⁸, and 1.8×10⁹ s^?1 are estimated for Zn^II, Cd^II, and Hg^II, respectively, at 298 K in terms of the transition‐state theory based on the assumption of a transmission coefficient of unity.     

Influence of cyanide and sulphide ions on the reduction and reoxidation of cobalt(II) in thiocyanate solution at mercury electrodes

The process of reduction and reoxidation of cobalt(II) in thiocyanate solution at hanging mercury drop electrode has been investigated by cyclic voltammetric, chronoamperometric and anodic stripping methods. In 0.1 M NaSCN and 0.4 M NaClO₄ solution containing 1×10^?3M cobalt(II), the voltammogram on the first cycle at 0.05 V s^?1 gives a cathodic peak at ?1.06 V with hysteresis on reversal, and an anodic wave with a peak potential of ?0.28 V and with two shoulders near ?0.38 and ?0.45 V, respectively. Multicyclic voltammograms under the same conditions give a cathodic peak at ?0.90 V and an anodic peak at ?0.45 V. The reduction and reoxidation of cobalt(II) in thiocyanate solution is accelerated by the reduction products of thiocyanate ion, cyanide and sulphide ions, which are produced during the electroreduction of cobalt(II).A mechanism of reduction and reoxidation of cobalt(II) which involves a chemical reduction of thiocyanate ion by electroreduced metallic cobalt and takes into account cyanide and sulphide ions is proposed. The hysteresis on the cathodic wave is caused by the difference in reduction potentials of cobalt(II)-thiocyanate and-cyanide complexes. Cyclic voltammetric study of cobalt(II) in perchlorate solution containing trace amounts of cyanide and sulphide ions supports these conclusions.