A New Highly Versatile Handle for Chemistry on a Solid Support: The Pipecolic Linker

The design, synthesis, and potential application of the pipecolic linker is presented. This new versatile handle can immobilize primary, secondary, and aromatic amines, as well as alcohols, phenols, and hydrazides, on a solid support. Compared with other linkers, the anchoring step is easy and efficient. The release of final products from the resin proceeds upon acidic treatment with high purities. The pipecolic linker offers the promise of being using in peptide chemistry to produce peptides modified at the N and C terminus, peptidomimetics, as well as small organic molecules.     

Thiophene backbone amide linkers, a new class of easily prepared and highly acid-labile linkers for solid-phase synthesis

Solid-phase synthesis is of tremendous importance for small-molecule and biopolymer synthesis. Linkers (handles) that release amide-containing products after completion of solid-phase synthesis are widely used. Here we present a new class of highly acid-labile backbone amide linkers (BAL handles) based on 3,4-ethylenedioxythiophene (EDOT), which we have termed T-BAL. These thiophene linkers are synthesized in three convenient steps from commercially available EDOT. In the linker design, the spacer was introduced to the EDOT core either via a carbon-carbon bond or via a thioether linkage. Introduction of the spacer via a C-C bond was performed by a chemoselective Negishi coupling without transient protection of the aldehyde group to provide the T-BAL1 handle. Introduction via a thioether linkage was performed by a facile nucleophilic aromatic substitution between the brominated EDOT aldehyde and unprotected mercapto acids to provide T-BAL2 and T-BAL3 handles. The minimal use of protecting groups gave the corresponding linker molecules in few synthetic steps and in good yields. After anchoring of the linker to a polymeric support, introduction of the first amino acid was achieved by reductive amination, giving a secondary amine. A following acylation of the secondary amine with a symmetrical amino acid anhydride resulted in a backbone amide linkage between the handle and the growing substrate (e.g., peptide chain). After solid-phase synthesis, the substrates could be released from the resin by either low acid conditions using 1% TFA in CH2Cl2 or high acid conditions such as 50% TFA in CH2Cl2. Peptide thioesters could be released from the T-BAL1 handle under very mild conditions using aqueous acetic acid. Tert-butyl based protecting groups, tert-butyl esters, tert-butyl ethers, and Boc groups, as well as dimethyl acetals were relatively stable to these mild conditions for release of the peptides.     

Chemical cross‐linking with NHS esters: a systematic study on amino acid reactivities

Structure elucidation of tertiary or quaternary protein structures by chemical cross‐linking and mass spectrometry (MS) has recently gained importance. To locate the cross‐linker modification, dedicated software is applied to analyze the mass or tandem mass spectra (MS/MS). Such software requires information on target amino acids to limit the data analysis time. The most commonly used homobifunctional N‐hydroxy succinimide (NHS) esters are often described as reactive exclusively towards primary amines, although side reactions with tyrosine and serine have been reported. Our goal was to systematically study the reactivity of NHS esters and derive some general rules for their attack of nucleophilic amino acid side chains in peptides. We therefore studied the cross‐linking reactions of synthesized and commercial model peptides with disuccinimidyl suberate (DSS). The first reaction site in all cases was expectedly the α‐NH₂‐group of the N‐terminus or the ε‐NH₂‐group of lysine. As soon as additional cross‐linkers were attached or loops were formed, other amino acids were also involved in the reaction. In addition to the primary amino groups, serine, threonine and tyrosine showed significant reactivity due to the effect of neighboring amino acids by intermediate or permanent Type‐1 cross‐link formation. The reactivity is highly dependent on the pH and on adjacent amino acids. Copyright © 2009 John Wiley & Sons, Ltd.     

A biuret‐derived,MS‐cleavable cross‐linking reagent for protein structural analysis: A proof‐of‐principle study

Chemical cross‐linking combined with mass spectrometry (XL‐MS) and computational modeling has evolved as an alternative method to derive protein 3D structures and to map protein interaction networks. Special focus has been laid recently on the development and application of cross‐linkers that are cleavable by collisional activation as they yield distinct signatures in tandem mass spectra. Building on our experiences with cross‐linkers containing an MS‐labile urea group, we now present the biuret‐based, CID‐MS/MS‐cleavable cross‐linker imidodicarbonyl diimidazole (IDDI) and demonstrate its applicability for protein cross‐linking studies based on the four model peptides angiotensin II, MRFA, substance P, and thymopentin.     

How Photoisomerization Drives Peptide Folding and Unfolding: Insights from QM/MM and MM Dynamics Simulations

Photoswitchable azobenzene cross‐linkers can control the folding and unfolding of peptides by photoisomerization and can thus regulate peptide affinities and enzyme activities. Using quantum mechanics/molecular mechanics (QM/MM) methods and classical MM force fields, we report the first molecular dynamics simulations of the photoinduced folding and unfolding processes in the azobenzene cross‐linked FK‐11 peptide. We find that the interactions between the peptide and the azobenzene cross‐linker are crucial for controlling the evolution of the secondary structure of the peptide and responsible for accelerating the folding and unfolding events. They also modify the photoisomerization mechanism of the azobenzene cross‐linker compared with the situation in vacuo or in solution.     

Synthesis of biotin‐tagged chemical cross‐linkers and their applications for mass spectrometry

Chemical cross‐linking combined with mass spectrometry (MS) has been used to elucidate protein structures and protein‐protein interactions. However, heterogeneity of the samples and the relatively low abundance of cross‐linked peptides make this approach challenging. As an effort to overcome this hurdle, we have synthesized lysine‐reactive homobifunctional cross‐linkers with the biotin in the middle of the linker and used them to enrich cross‐linked peptides. The reaction of biotin‐tagged cross‐linkers with purified HIV‐1 CA resulted in the formation of hanging and intramolecular cross‐links. The peptides modified with biotinylated cross‐linkers were effectively enriched and recovered using a streptavidin‐coated plate and MS‐friendly buffers. The enrichment of modified peptides and removal of the dominantly unmodified peptides simplify mass spectra and their analyses. The combination of the high mass accuracy of Fourier transform ion cyclotron resonance (FT‐ICR) MS and the tandem mass spectrometric (MS/MS) capability of the linear ion trap allows us to unambiguously identify the cross‐linking sites and additional modification, such as oxidation. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and Biological Evaluation of RGD Peptidomimetic–Paclitaxel Conjugates Bearing Lysosomally Cleavable Linkers

Two small‐molecule–drug conjugates (SMDCs, 6 and 7 ) featuring lysosomally cleavable linkers (namely the Val–Ala and Phe–Lys peptide sequences) were synthesized by conjugation of the α_vβ₃‐integrin ligand cyclo[DKP–RGD]‐CH₂NH₂ ( 2 ) to the anticancer drug paclitaxel (PTX). A third cyclo[DKP–RGD]–PTX conjugate with a nonpeptide “uncleavable” linker ( 8 ) was also synthesized to be tested as a negative control. These three SMDCs were able to inhibit biotinylated vitronectin binding to the purified α_Vβ₃‐integrin receptor at nanomolar concentrations and showed good stability at pH 7.4 and pH 5.5. Cleavage of the two peptide linkers was observed in the presence of lysosomal enzymes, whereas conjugate 8 , which possesses a nonpeptide “uncleavable” linker, remained intact under these conditions. The antiproliferative activities of the conjugates were evaluated against two isogenic cell lines expressing the integrin receptor at different levels: the acute lymphoblastic leukemia cell line CCRF‐CEM (α_Vβ₃?) and its subclone CCRF‐CEM α_Vβ₃ (α_Vβ₃+). Fairly effective integrin targeting was displayed by the cyclo[DKP–RGD]–Val–Ala–PTX conjugate ( 6 ), which was found to differentially inhibit proliferation in antigen‐positive CCRF‐CEM α_Vβ₃ versus antigen‐negative isogenic CCRF‐CEM cells. The total lack of activity displayed by the “uncleavable” cyclo[DKP–RGD]–PTX conjugate ( 8 ) clearly demonstrates the importance of the peptide linker for achieving the selective release of the cytotoxic payload.     

Synthesis of Bifunctional Azobenzene Glycoconjugates for Cysteine‐Based Photosensitive Cross‐Linking with Bioactive Peptides

Azobenzene linker molecules can be utilized to control peptide/protein function when they are ligated to appropriately spaced amino acid side chains of the peptide. This is because the photochemical E/Z isomerization of the azobenzene N?N double bond allows to switch peptide conformation between folded and unfolded. In this context, we have introduced carbohydrate‐functionalized azobenzene derivatives in order to advance the biocompatible properties of azobenzene peptide linkers. Chloroacetamide‐functionalized and O‐allylated carbohydrate derivatives were synthesized and conjugated with azobenzene to achieve new bifunctional cross‐linkers, in order to allow ligation to cysteine side chains by nucleophilic substitution or thiol‐ene reaction, respectively. The photochromic properties of the new linker glycoconjugates were determined and first ligation reactions performed.     

Heavy‐Atom Labeled Transmembrane β‐Peptides: Synthesis,CD‐Spectroscopy,and X‐ray Diffraction Studies in Model Lipid Multilayer

Transmembrane β‐peptides are promising candidates for the design of well‐controlled membrane anchors in lipid membranes. Here, we present the synthesis of transmembrane β‐peptides with and without tryptophan anchors, as well as a novel iodine‐labeled d ‐β³‐amino acid. By using one or more of the heavy‐atom labeled amino acids as markers, the orientation of the helical peptide was inferred based on the electron‐density profile determined by X‐ray reflectivity. The β‐peptides were synthesized through manual Fmoc‐based solid‐phase peptide synthesis (SPPS) and reconstituted in unilamellar vesicles forming a right‐handed 3₁₄‐helix secondary structure, as shown by circular dichroism spectroscopy. We then integrated the β‐peptide into solid‐supported membrane stacks and carried out X‐ray reflectivity and grazing incidence small‐angle X‐ray scattering to determine the β‐peptide orientation and its effect on the membrane bilayers. These β‐peptides adopt a well‐ordered transmembrane motif in the solid‐supported model membrane, maintaining the basic structure of the original bilayer with some distinct alterations. Notably, the helical tilt angle, which accommodates the positive hydrophobic mismatch, induces a tilt of the acyl chains. The tilted chains, in turn, lead to a membrane thinning effect.     

Easy Production of “Difficult Peptides” Using Cell-Free Protein Synthesis and a New Methionine Analogue as a Latent Peptide Cleavage Site

Aliphatic γ-chloro-α-amino acids incorporated in place of their canonical analogues through cell-free protein synthesis act as heat-labile linkers, offering a useful strategy for the straightforward production of target peptides as fusion proteins, from which the targets are readily released. Until now, the natural abundance of aliphatic amino acids in peptides has limited the scope of the method, as it leads to undesired cleavage sites in synthesized products, but here the authors report the development of a new cleavable chloro amino acid that incorporates in place of the relatively rare amino acid methionine, thus greatly expanding the scope of producible targets. This new strategy is employed for simplified peptide synthesis with a methionine-free fusion partner, allowing single-site incorporation of the cleavable linker for clean release and easy purification of the target peptide. Its utility is demonstrated through the straightforward preparation of two peptides reported to be challenging targets and not accessible through standard solid-phase chemical methodologies, as well as analogues.     

Dissociation behavior of a bifunctional tempo‐active ester reagent for peptide structure analysis by free radical initiated peptide sequencing (FRIPS) mass spectrometry

We have synthesized a homobifunctional active ester cross‐linking reagent containing a TEMPO (2,2,6,6‐tetramethylpiperidine‐1‐oxy) moiety connected to a benzyl group (Bz), termed TEMPO‐Bz‐linker. The aim for designing this novel cross‐linker was to facilitate MS analysis of cross‐linked products by free radical initiated peptide sequencing (FRIPS). The TEMPO‐Bz‐linker was reacted with all 20 proteinogenic amino acids as well as with model peptides to gain detailed insights into its fragmentation mechanism upon collision activation. The final goal of this proof‐of‐principle study was to evaluate the potential of the TEMPO‐Bz‐linker for chemical cross‐linking studies to derive 3D‐structure information of proteins. Our studies were motivated by the well documented instability of the central NO―C bond of TEMPO‐Bz reagents upon collision activation. The fragmentation of this specific bond was investigated in respect to charge states and amino acid composition of a large set of precursor ions resulting in the identification of two distinct fragmentation pathways. Molecular ions with highly basic residues are able to keep the charge carriers located, i.e. protons or sodium cations, and consequently decompose via a homolytic cleavage of the NO―C bond of the TEMPO‐Bz‐linker. This leads to the formation of complementary open‐shell peptide radical cations, while precursor ions that are protonated at the TEMPO‐Bz‐linker itself exhibit a charge‐driven formation of even‐electron product ions upon collision activation. MS³ product ion experiments provided amino acid sequence information and allowed determining the cross‐linking site. Our study fully characterizes the CID behavior of the TEMPO‐Bz‐linker and demonstrates its potential, but also its limitations for chemical cross‐linking applications utilizing the special features of open‐shell peptide ions on the basis of selective tandem MS analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

A dimethyl ketal-protected benzoin-based linker suitable for photolytic release of unprotected peptides

Photolabile 3',5'-dimethoxybenzoin-based linkers are advantageous for a variety of solid-phase synthetic procedures and manipulations of biomolecules because UV irradiation in aqueous media provides fast and essentially quantitative release of tethered molecules, while generating unreactive side products. Practical applications of previously reported linkers are compromised to some extent by the 1,3-dithiane protection of the benzoin carbonyl group and the lengthy synthesis. We have extended the group of photocleavable 3',5'-dimethoxybenzoin-based linkers by designing and synthesizing a linker in which the carbonyl group is protected as a dimethyl ketal. This protection is compatible with commonly used esterification and amide bond formation techniques, including the Fmoc/tBu strategy for solid phase peptide synthesis, is stable under mild acidic conditions, and can be quantitatively removed in <5 min by 3% TFA in dichloromethane. Irradiation of beads carrying peptides attached to the linker at 350 nm in aqueous or partially aqueous media affords >90% release after 30 min. The linker was synthesized from commercially available starting materials in five steps with an overall yield of 40% and without any column chromatography purification. Additionally, we developed a route to a dithiane-protected linker that requires only two steps and proceeds in 65% yield, a significant improvement over previous synthetic routes.     

Effects of peptide acetylation and dimethylation on electrospray ionization efficiency

Peptide acetylation and dimethylation have been widely used to derivatize primary amino groups (peptide N‐termini and the ε‐amino group of lysines) for chemical isotope labeling of quantitative proteomics or for affinity tag labeling for selection and enrichment of labeled peptides. However, peptide acetylation results in signal suppression during electrospray ionization (ESI) due to charge neutralization. In contrast, dimethylated peptides show increased ionization efficiency after derivatization, since dimethylation increases hydrophobicity and maintains a positive charge on the peptide under common LC conditions. In this study, we quantitatively compared the ESI efficiencies of acetylated and dimethylated model peptides and tryptic peptides of BSA. Dimethylated peptides showed higher ionization efficiency than acetylated peptides for both model peptides and tryptic BSA peptides. At the proteome level, peptide dimethylation led to better protein identification than peptide acetylation when tryptic peptides of mouse brain lysate were analyzed with LC‐ESI‐MS/MS. These results demonstrate that dimethylation of tryptic peptides enhanced ESI efficiency and provided up to two‐fold improved protein identification sensitivity in comparison with acetylation. Copyright © 2016 John Wiley & Sons, Ltd.     

Olefinic reagents tested for peptide derivatization with switchable properties: Stable upon collision induced dissociation and cleavable by in‐source Paternò‐Büchi reactions

This contribution is part of our ongoing efforts to develop innovative cross‐linking (XL) reagents and protocols for facilitated peptide mixture analysis and efficient assignment of cross‐linked peptide products. In this report, we combine in‐source Paternò‐Büchi (PB) photo‐chemistry with a tandem mass spectrometry approach to selectively address the fragmentation of a tailor‐made cross‐linking reagent. The PB photochemistry, so far exclusively used for the identification of unsaturation sites in lipids and in lipidomics, is now introduced to the field of chemical cross‐linking. Based on trans‐3‐hexenedioic acid, an olefinic homo bifunctional amine reactive XL reagent was designed and synthesized for this proof‐of‐principle study. Condensation products of the olefinic reagent with a set of exemplary peptides are used to test the feasibility of the concept. Benzophenone is photochemically reacted in the nano‐electrospray ion source and forms oxetane PB reaction products. Subsequent CID‐MS triggered retro‐PB reaction of the respective isobaric oxetane molecular ions and delivers reliably and predictably two sets of characteristic fragment ions of the cross‐linker. Based on these signature ion sets, a straightforward identification of covalently interconnected peptides in complex digests is proposed. Furthermore, CID‐MSⁿ experiments of the retro‐PB reaction products deliver peptide backbone characteristic fragment ions. Additionally, the olefinic XL reagents exhibit a pronounced robustness upon CID‐activation, without previous UV‐excitation. These experiments document that a complete backbone fragmentation is possible, while the linker‐moiety remains intact. This feature renders the new olefinic linkers switchable between a stable, noncleavable cross‐linking mode and an in‐source PB cleavable mode.     

Effect of Linker Length and Flexibility on the <Emphasis Type="Italic">Clostridium thermocellum</Emphasis> Esterase Displayed on <Emphasis Type="Italic">Bacillus subtilis</Emphasis> Spores

In fusion protein design strategies, the flexibility and length of linkers are important parameters affecting the bioactivity of multifunctional proteins. A series of fusion proteins with different linkers were constructed. The effect of temperature, pH, and organic solvents was investigated on the enzymatic activity. Fusion proteins with P1(PTPTPT) and P2((PTPTPT)₂) linkers remained highly active with wide temperature range. At pH 9.6, the relative activity of fusion proteins with (PTPTPT)₂ and S2(EGKSSGSGSESKST) linkers was 70 and 62 % (1.75 and 1.5 times of that of non-linker ones). Fusion proteins with S3((GGGGS)₄) linker retained 55 % activity after 5 h of incubation at 80 °C (1.2-fold of that of non-linker fusion proteins and 1.9-fold of GGGGS-linker fusion proteins). Finally, the relative activity of fusion proteins having different linkers was increased with 20 % dimethyl sulfoxide (DMSO) and methanol; relative activity of fusion proteins with EGKSSGSGSESKST linkers was enhanced 1.5- and 2.2-fold, respectively. These results suggest that longer flexible linker can enhance the activity and stability of displayed esterase than shorter flexible linker. Optimizing peptide linkers with length, flexibility, and amino acid composition could improve the thermostability and activity of the displayed enzyme.     

Quantification of glycated N‐terminal peptide of hemoglobin using derivatization for multiple functional groups of amino acids followed by liquid chromatography/tandem mass spectrometry

A novel method of amino acid analysis using derivatization of multiple functional groups (amino, carboxyl, and phenolic hydroxyl groups) was applied to measure glycated amino acids in order to quantify glycated peptides and evaluate the degree of glycation of peptide. Amino and carboxyl groups of amino acids were derivatized with 1‐bromobutane so that the hydrophobicities and basicities of the amino acids, including glycated amino acids, were improved. These derivatized amino acids could be detected with high sensitivity using LC‐MS/MS. In this study, 1‐deoxyfructosyl‐VHLTPE and VHLTPE, which are N‐terminal peptides of the β‐chains of hemoglobin, were selected as target compounds. After reducing the peptide sample solution with sodium borohydride, the obtained peptides were hydrolyzed with hydrochloric acid. The released amino acids were then derivatized with 1‐bromobutane and analyzed with LC‐MS/MS. The derivatized amino acids, including glycated amino acids, could be separated using an octadecyl silylated silica column and good sharp peaks were detected. We show a confirmatory experiment that the proposed method can be applied to evaluate the degree of glycation of peptides, using mixtures of glycated and non‐glycated peptide. Copyright © 2015 John Wiley & Sons, Ltd.     

Mechanochemical Encapsulation of Fullerenes in Peptidic Containers Prepared by Dynamic Chiral Self‐Sorting and Self‐Assembly

Molecular capsules composed of amino acid or peptide derivatives connected to resorcin[4]arene scaffolds through acylhydrazone linkers have been synthesized using dynamic covalent chemistry (DCC) and hydrogen‐bond‐based self‐assembly. The dynamic character of the linkers and the preference of the peptides towards self‐assembly into β‐barrel‐type motifs lead to the spontaneous amplification of formation of homochiral capsules from mixtures of different substrates. The capsules have cavities of around 800 ų and exhibit good kinetic stability. Although they retain their dynamic character, which allows processes such as chiral self‐sorting and chiral self‐assembly to operate with high fidelity, guest complexation is hindered in solution. However, the quantitative complexation of even very large guests, such as fullerene C₆₀ or C₇₀, is possible through the utilization of reversible covalent bonds or the application of mechanochemical methods. The NMR spectra show the influence of the chiral environment on the symmetry of the fullerene molecules, which results in the differentiation of diastereotopic carbon atoms for C₇₀, and the X‐ray structures provide unique information on the modes of peptide–fullerene interactions.     

New stable backbone linker resins for solid-phase peptide synthesis

[reaction: see text] Two new 4-methoxybenzaldehyde backbone linker resins were developed for the solid-phase synthesis of peptides. The linkers are very stable during the cleavage of common protecting groups for amines (Fmoc, Boc) and carboxylic acids (Me, All, tBu) in peptide synthesis. Cleavage from the resin with refluxing TFA is sufficiently mild for peptides containing polar and nonpolar amino acids.     

Synthetic procedure for N-fmoc amino acyl-N-sulfanylethylaniline linker as crypto-Peptide thioester precursor with application to native chemical ligation

N-Sulfanylethylanilide (SEAlide) peptides 1, obtainable using Fmoc-based solid-phase peptide synthesis (Fmoc SPPS), function as crypto-thioesters in native chemical ligation (NCL), yielding a wide variety of peptides/proteins. Their acylating potential with N-terminal cysteinyl peptides 2 can be tuned by the presence or absence of phosphate salts, leading to one-pot/multifragment ligation, operating under kinetically controlled conditions. SEAlide peptides have already been shown to be promising for use in protein synthesis; however, a widely applicable method for the synthesis of N-Fmoc amino acyl-N-sulfanylethylaniline linkers 4, required for the preparation of SEAlide peptides, is unavailable. The present study addresses the development of efficient condensation protocols of 20 naturally occurring amino acid derivatives to the N-sulfanylethylaniline linker 5. N-Fmoc amino acyl aniline linkers 4 of practical use in NCL chemistry, except in the case of the proline- or aspartic acid-containing linker, were successfully synthesized by coupling of POCl(3)- or SOCl(2)-activated Fmoc amino acid derivatives with sodium anilide species 6, without accompanying racemization and loss of side-chain protection. Furthermore, SEAlide peptides 7 possessing various C-terminal amino acids (Gly, His, Phe, Ala, Asn, Ser, Glu, and Val) were shown to be of practical use in NCL chemistry.     

Radical Stability Directs Electron Capture and Transfer Dissociation of β‐Amino Acids in Peptides

We report on the characteristics of the radical‐ion‐driven dissociation of a diverse array of β‐amino acids incorporated into α‐peptides, as probed by tandem electron‐capture and electron‐transfer dissociation (ECD/ETD) mass spectrometry. The reported results demonstrate a stronger ECD/ETD dependence on the nature of the amino acid side chain for β‐amino acids than for their α‐form counterparts. In particular, only aromatic (e.g., β‐Phe), and to a substantially lower extent, carbonyl‐containing (e.g., β‐Glu and β‐Gln) amino acid side chains, lead to N? C_β bond cleavage in the corresponding β‐amino acids. We conclude that radical stabilization must be provided by the side chain to enable the radical‐driven fragmentation from the nearby backbone carbonyl carbon to proceed. In contrast with the cleavage of backbones derived from α‐amino acids, ECD of peptides composed mainly of β‐amino acids reveals a shift in cleavage priority from the N? C_β to the C_α? C bond. The incorporation of CH₂ groups into the peptide backbone may thus drastically influence the backbone charge solvation preference. The characteristics of radical‐driven β‐amino acid dissociation described herein are of particular importance to methods development, applications in peptide sequencing, and peptide and protein modification (e.g., deamidation and isomerization) analysis in life science research.