Enzyme‐Inspired Room‐Temperature Lithium–Oxygen Chemistry via Reversible Cleavage and Formation of Dioxygen Bonds

Li‐O₂ batteries are promising energy storage systems due to their ultra‐high theoretical capacity. However, most Li‐O₂ batteries are based on the reduction/oxidation of Li₂O₂ and involve highly reactive superoxide and peroxide species that would cause serious degradation of cathodes, especially carbon‐based materials. It is important to explore lithium‐oxygen reactions and find new Li‐O₂ chemistry which can restrict or even avoid the negative influence of superoxide/peroxide species. Here, inspired by enzyme‐catalyzed oxygen reduction/oxidation reactions, we introduce a copper(I) complex 3 N‐Cu^I (3 N=1,4,7‐trimethyl‐1,4,7‐triazacyclononane) to Li‐O₂ batteries and successfully modulate the reaction pathway to a moderate one on reversible cleavage/formation of O?O bonds. This work demonstrates that the reaction pathways of Li‐O₂ batteries could be modulated by introducing an appropriate soluble catalyst, which is another powerful choice to construct better Li‐O₂ batteries.     

Visible‐Light‐Mediated 1,2‐Acyl Migration: The Reaction of Secondary Enamino Ketones with Singlet Oxygen

Secondary enaminones were oxidized by photochemically generated singlet oxygen, followed by nucleophilic addition of alcohol and an unexpected 1,2‐acyl migration to afford quaternary amino acid derivatives. An ene‐type reaction pathway is proposed. It is distinctively different from the typical [2+2] addition of singlet oxygen to a C?C bond pathway.     

The Proportion of Fe‐NX,N Doping Species and Fe3C to Oxygen Catalytic Activity in Core‐Shell Fe‐N/C Electrocatalyst

A bifunctional oxygen electrocatalyst composed of iron carbide (Fe₃C) nanoparticles encapsulated by nitrogen doped carbon sheets is reported. X‐ray photoelectron spectroscopy and X‐ray absorption near edge structure revealed the presence of several kinds of active sites (Fe?N_x sites, N doping sites) and the modulated electron structure of nitrogen doped carbon sheets. Fe₃C@N‐CSs shows excellent oxygen evolution and oxygen reduction catalytic activity owing to the modulated electron structure by encapsulated Fe₃C core via biphasic interfaces electron interaction, which can lower the free energy of intermediate, strengthen the bonding strength and enhance conductivity. Meanwhile, the contribution of the Fe?N_x sites, N doping sites and the effect of Fe₃C core for the electrocatalytic oxygen reaction is originally revealed. The Fe₃C@N‐CSs air electrode‐based zinc‐air battery demonstrates a high open circuit potential of 1.47 V, superior charge‐discharge performance and long lifetime, which outperforms the noble metal‐based zinc‐air battery.     

Surface Reorganization on Electrochemically‐Induced Zn–Ni–Co Spinel Oxides for Enhanced Oxygen Electrocatalysis

Herein, we highlight redox‐inert Zn²⁺ in spinel‐type oxide (Zn_XNi_1?XCo₂O₄) to synergistically optimize physical pore structure and increase the formation of active species on the catalyst surface. The presence of Zn²⁺ segregation has been identified experimentally and theoretically under oxygen‐evolving condition, the newly formed V_Zn?O?Co allows more suitable binding interaction between the active center Co and the oxygenated species, resulting in superior ORR performance. Moreover, a liquid flow Zn–air battery is constituted employing the structurally optimized Zn_0.4Ni_0.6Co₂O₄ nanoparticles supported on N‐doped carbon nanotube (ZNCO/NCNTs) as an efficient air cathode, which presents remarkable power density (109.1 mW cm^?2), high open circuit potential (1.48 V vs. Zn), excellent durability, and high‐rate performance. This finding could elucidate the experimentally observed enhancement in the ORR activity of Zn_XNi_1?XCo₂O₄ oxides after the OER test.     

The Solid‐Phase Synthesis of an Fe‐N‐C Electrocatalyst for High‐Power Proton‐Exchange Membrane Fuel Cells

The environmentally friendly synthesis of highly active Fe‐N‐C electrocatalysts for proton‐exchange membrane fuel cells (PEMFCs) is desirable but remains challenging. A simple and scalable method is presented to fabricate Fe^II‐doped ZIF‐8, which can be further pyrolyzed into Fe‐N‐C with 3 wt % of Fe exclusively in Fe‐N₄ active moieties. Significantly, this Fe‐N‐C derived acidic PEMFC exhibits an unprecedented current density of 1.65 A cm^?2 at 0.6 V and the highest power density of 1.14 W cm^?2 compared with previously reported NPMCs. The excellent PEMFC performance can be attributed to the densely and atomically dispersed Fe‐N₄ active moieties on the small and uniform catalyst nanoparticles.     

Photo‐excited Oxygen Reduction and Oxygen Evolution Reactions Enable a High‐Performance Zn–Air Battery

The storage of solar energy in battery systems is pivotal for a sustainable society, which faces many challenges. Herein, a Zn–air battery is constructed with two cathodes of poly(1,4‐di(2‐thienyl))benzene (PDTB) and TiO₂ grown on carbon papers to sandwich a Zn anode. The PDTB cathode is illuminated in a discharging process, in which photoelectrons are excited into the conduction band of PDTB to promote oxygen reduction reaction (ORR) and raise the output voltage. In a reverse process, holes in the valence band of the illuminated TiO₂ cathode are driven for the oxygen evolution reaction (OER) by an applied voltage. A record‐high discharge voltage of 1.90 V and an unprecedented low charge voltage of 0.59 V are achieved in the photo‐involved Zn–air battery, regardless of the equilibrium voltage. This work offers an innovative pathway for photo‐energy utilization in rechargeable batteries.     

Efficient Fe‐Co‐N‐C Electrocatalyst Towards Oxygen Reduction Derived from a Cationic CoII‐based Metal–Organic Framework Modified by Anion‐Exchange with Potassium Ferricyanide

Fe‐Co‐N‐C electrocatalysts have proven superior to their counterparts (e.g. Fe‐N‐C or Co‐N‐C) for the oxygen reduction reaction (ORR). Herein, we report on a unique strategy to prepare Fe‐Co‐N‐C?x (x refers to the pyrolysis temperature) electrocatalysts which involves anion‐exchange of [Fe(CN)₆]^3? into a cationic Co^II‐based metal‐organic framework precursor prior to heat treatment. Fe‐Co‐N‐C‐900 exhibits an optimal ORR catalytic performance in an alkaline electrolyte with an onset potential (E_onset: 0.97 V) and half‐wave potential (E_1/2: 0.86 V) comparable to that of commercial Pt/C (E_onset=1.02 V; E_1/2=0.88 V), which outperforms the corresponding Co‐N‐C‐900 sample (E_onset=0.92 V; E_1/2=0.84 V) derived from the same MOF precursor without anion‐exchange modification. This is the first example of Fe‐Co‐N‐C electrocatalysts fabricated from a cationic Co^II‐based MOF precursor that dopes the Fe element via anion‐exchange, and our current work provides a new entrance towards MOF‐derived transition‐metal (e.g. Fe or Co) and nitrogen‐codoped carbon electrocatalysts with excellent ORR activity.     

A review of transition metal‐based bifunctional oxygen electrocatalysts

Electrochemical energy storage and conversion devices play a key role in the development of clean, sustainable, and efficient energy systems to meet the sustainable growth of our society. However, challenging issues including the sluggish kinetics of oxygen electrode reactions involving the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are present, limiting the implementation of devices such as metal‐air batteries, water electrolyzers, and regenerative fuel cells. In this review, various monometallic and bimetallic transition metal oxides (TMOs) and hydroxides are summarized in terms of their application for ORR/OER, in which the merits and demerits of various precious metal and carbon‐based metal oxide materials are discussed, with requirements for better electrocatalysts and catalyst support being introduced as well. Following this, different approaches to improve catalytic activity such as the introduction of doping and defects, the manipulation of crystal facets, and the engineering of supports, compositions, and morphologies are summarized in which TMOs with improved ORR/OER catalytic activities can be synthesized, further improving the speed, stability, and polarization of electrochemical energy storage and conversion devices. Finally, perspectives into the improvement of performance and the better understanding of ORR/OER mechanisms for bifunctional electrocatalysts using in situ spectroscopic techniques and density functional theory calculations are also discussed.     

Spontaneous Synthesis of Silver‐Nanoparticle‐Decorated Transition‐Metal Hydroxides for Enhanced Oxygen Evolution Reaction

The fabrication of metal‐supported hybrid structures with enhanced properties typically requires external energy input, such as pyrolysis, photolysis, and electrodeposition. In this study, silver‐nanoparticle‐decorated transition‐metal hydroxide (TMH) composites were synthesized by an approach based on a spontaneous redox reaction (SRR) at room temperature. The SRR between silver ions and TMH provides a simple and facile route to establish effective and stable heterostructures that can enhance the oxygen evolution reaction (OER) activity. Ag@Co(OH)_x grown on carbon cloth exhibits outstanding OER activity and durability, even superior to IrO₂ and many previously reported OER electrocatalysts. Experimental and theoretical analysis demonstrates that the strong electronic interaction between Ag and Co(OH)₂ activates the silver clusters as catalytically OER active sites, effectively optimizing the binding energies with reacted intermediates and facilitating the OER kinetics.     

Gold‐Nanoparticle‐Loaded Carbonate‐Modified Titanium(IV) Oxide Surface: Visible‐Light‐Driven Formation of Hydrogen Peroxide from Oxygen

Gold nanoparticle‐loaded rutile TiO₂ with a bimodal size distribution around 10.6 nm and 2.3 nm (BM‐Au/TiO₂) was prepared by the deposition precipitation and chemical reduction (DP‐CR) technique. Visible‐light irradiation (λ>430 nm) of the BM‐Au/TiO₂ plasmonic photocatalyst yields 35 μm H₂O₂ in aerated pure water at irradiation time (t_p)=1 h, and the H₂O₂ concentration increases to 640±60 μm by the addition of 4 % HCOOH as a sacrificing electron donor. Further, a carbonate‐modified surface BM‐Au/TiO₂ (BM‐Au/TiO₂‐CO₃^2?) generates a millimolar level of H₂O₂ at t_p=1 h with a quantum efficiency (Φ) of 5.4 % at λ=530 nm under the same conditions. The recycle experiments confirmed the stable performance of BM‐Au/TiO₂.     

Ion‐Exchange‐Assisted Synthesis of Pt‐VC Nanoparticles Loaded on Graphitized Carbon: A High‐Performance Nanocomposite Electrocatalyst for Oxygen‐Reduction Reactions

Carbide‐based electrocatalysts are superior to traditional carbon‐based electrocatalysts, such as the commercial Pt/C electrocatalysts, in terms of their mass activity and stability. Herein, we report a general approach for the preparation of a nanocomposite electrocatalyst of platinum and vanadium carbide nanoparticles that are loaded onto graphitized carbon. The nanocomposite, which was prepared in a localized and controlled fashion by using an ion‐exchange process, was an effective electrocatalyst for the oxygen‐reduction reaction (ORR). Both the stability and the durability of the Pt‐VC/GC nanocomposite catalyst could be enhanced compared with the state‐of‐the‐art Pt/C. This approach can be extended to the synthesis of other metal‐carbide‐based nanocatalysts. Moreover, this straightforward synthesis of high‐performance composite nanocatalysts can be scaled up to meet the requirements for mass production.     

Controlled Anisotropic Growth of Co‐Fe‐P from Co‐Fe‐O Nanoparticles

A facile approach to bimetallic phosphides, Co‐Fe‐P, by a high‐temperature (300 °C) reaction between Co‐Fe‐O nanoparticles and trioctylphosphine is presented. The growth of Co‐Fe‐P from the Co‐Fe‐O is anisotropic. As a result, Co‐Fe‐P nanorods (from the polyhedral Co‐Fe‐O nanoparticles) and sea‐urchin‐like Co‐Fe‐P (from the cubic Co‐Fe‐O nanoparticles) are synthesized with both the nanorod and the sea‐urchin‐arm dimensions controlled by Co/Fe ratios. The Co‐Fe‐P structure, especially the sea‐urchin‐like (Co_0.54Fe_0.46)₂P, shows enhanced catalysis for the oxygen evolution reaction in KOH with its catalytic efficiency surpassing the commercial Ir catalyst. Our synthesis is simple and may be readily extended to the preparation of other multimetallic phosphides for important catalysis and energy storage applications.     

ZIF‐8 Derived Graphene‐Based Nitrogen‐Doped Porous Carbon Sheets as Highly Efficient and Durable Oxygen Reduction Electrocatalysts

Nitrogen‐doped carbon (NC) materials have been proposed as next‐generation oxygen reduction reaction (ORR) catalysts to significantly improve scalability and reduce costs, but these alternatives usually exhibit low activity and/or gradual deactivation during use. Here, we develop new 2D sandwich‐like zeolitic imidazolate framework (ZIF) derived graphene‐based nitrogen‐doped porous carbon sheets (GNPCSs) obtained by in situ growing ZIF on graphene oxide (GO). Compared to commercial Pt/C catalyst, the GNPCSs show comparable onset potential, higher current density, and especially an excellent tolerance to methanol and superior durability in the ORR. Those properties might be attributed to a synergistic effect between NC and graphene with regard to structure and composition. Furthermore, higher open‐circuit voltage and power density are obtained in direct methanol fuel cells.     

Hyperporous‐Carbon‐Supported Nonprecious Metal Electrocatalysts for the Oxygen Reduction Reaction

Highly porous carbonaceous nonprecious metal catalysts for the oxygen reduction reaction are prepared by carbonization of low‐cost metalloporphyrin‐based hyper‐crosslinked polymers (MPH‐X). With high surface area (2768 m² g⁻¹), hierarchical porous structure, and high metal loading (9.97 wt %), the obtained hyperporous carbon MPH‐Fe/C catalyst exhibits high oxygen reduction reaction (ORR) activity with a half‐wave potential (0.816 V) that is comparable to the 0.819 V of commercial Pt/C. Stability tests reveal that MPH‐Fe/C also exhibits outstanding long‐term durability and methanol tolerance. Our findings may offer an alternative approach to produce nonprecious metal ORR catalysts on a large scale owing to the low‐cost MPH‐X precursors with diverse metal types.     

Solvent‐Mediated Control of the Electrochemical Discharge Products of Non‐Aqueous Sodium–Oxygen Electrochemistry

The reduction of dioxygen in the presence of sodium cations can be tuned to give either sodium superoxide or sodium peroxide discharge products at the electrode surface. Control of the mechanistic direction of these processes may enhance the ability to tailor the energy density of sodium–oxygen batteries (NaO₂: 1071 Wh kg^?1 and Na₂O₂: 1505 Wh kg^?1). Through spectroelectrochemical analysis of a range of non‐aqueous solvents, we describe the dependence of these processes on the electrolyte solvent and subsequent interactions formed between Na⁺ and O₂^?. The solvents ability to form and remove [Na⁺‐O₂^?]_ads based on Gutmann donor number influences the final discharge product and mechanism of the cell. Utilizing surface‐enhanced Raman spectroscopy and electrochemical techniques, we demonstrate an analysis of the response of Na‐O₂ cell chemistry with sulfoxide, amide, ether, and nitrile electrolyte solvents.     

Metal‐Nitrogen‐doped Porous Carbons Derived from Metal‐Containing Ionic Liquids for Oxygen Reduction Reaction

This study describes a self‐doping and additive‐free strategy for the synthesis of metal‐nitrogen‐doped porous carbon materials (CMs) via carbonizing well‐tailored precursors, metal‐containing ionic liquids (M‐ILs). The organic skeleton in M‐ILs serves as both carbon and nitrogen sources, while metal ions acts as porogen and metallic dopants. A high nitrogen content, appropriate content of metallic species and hierarchical porosity synergistically endow the resultant CMs (MIBA‐M‐T) as effective electrocatalysts for the oxygen reduction reaction (ORR). MIBA‐Fe‐900 with a high specific surface area of 1567 m² g^?1 exhibits an activity similar to that of Pt/C catalyst, a higher tolerance to methanol than Pt/C, and long‐term durability. This work supplies a simple and convenient route for the preparation of metal‐containing carbon electrocatalysts.     

Coordination Tunes Selectivity: Two‐Electron Oxygen Reduction on High‐Loading Molybdenum Single‐Atom Catalysts

Single‐atom catalysts (SACs) have great potential in electrocatalysis. Their performance can be rationally optimized by tailoring the metal atoms, adjacent coordinative dopants, and metal loading. However, doing so is still a great challenge because of the limited synthesis approach and insufficient understanding of the structure–property relationships. Herein, we report a new kind of Mo SAC with a unique O,S coordination and a high metal loading over 10 wt %. The isolation and local environment was identified by high‐angle annular dark‐field scanning transmission electron microscopy and extended X‐ray absorption fine structure. The SACs catalyze the oxygen reduction reaction (ORR) via a 2 e^? pathway with a high H₂O₂ selectivity of over 95 % in 0.10 m KOH. The critical role of the Mo single atoms and the coordination structure was revealed by both electrochemical tests and theoretical calculations.     

Pyrolytic Carbon‐coated Cu‐Fe Alloy Nanoparticles with High Catalytic Performance for Oxygen Electroreduction

Well‐dispersed carbon‐coated or nitrogen‐doped carbon‐coated copper‐iron alloy nanoparticles (FeCu@C or FeCu@C?N) in carbon‐based supports are obtained using a bimetallic metal‐organic framework (Cu/Fe‐MOF‐74) or a mixture of Cu/Fe‐MOF‐74 and melamine as sacrificial templates and an active‐component precursor by using a pyrolysis method. The investigation results attest formation of Cu?Fe alloy nanoparticles. The obtained FeCu@C catalyst exhibits a catalytic activity with a half‐wave potential of 0.83 V for oxygen reduction reaction (ORR) in alkaline medium, comparable to that on commercial Pt/C catalyst (0.84 V). The catalytic activity of FeCu@C?N for ORR (E_half‐wave=0.87 V) outshines all reported analogues. The excellent performance of FeCu@C?N should be attributed to a change in the energy of the d‐band center of Cu resulting from the formation of the copper–iron alloy, the interaction between alloy nanoparticles and supports and N‐doping in the carbon matrix. Moreover, FeCu@C and FeCu@C?N show better electrochemical stability and methanol tolerance than commercial Pt/C and are expected to be widely used in practical applications.     

Regenerable‐Catalyst‐Aided,Opened to Air and Sunlight‐Driven “CuAAC&ATRP” Concurrent Reaction for Sequence‐Controlled Copolymer

An ideal stimuli‐responsive controlled/living radical polymerization should have the ability to manipulate the reaction through spatiotemporal “on/off” controls, achieving the polymerization under fully open conditions and allowing for precise control over macromolecular architecture with defined molecular weights and monomer sequence. In this contribution, the photo (sunlight)‐induced electron transfer atom transfer radical‐polymerization (PET‐ATRP) can be realized to be reversibly activated and deactivated under fully open conditions utilizing one‐component copper(II) thioxanthone carboxylate as multifunctional photocatalyst and oxygen scavenger. The polymerization behaviors are investigated, presenting controlled features with first‐order kinetics and linear relationships between molecular weights and monomer conversions. More importantly, “CuAAC&ATRP” concurrent reaction combining PET‐ATRP, photodriven deoxygenation, and photoactivated CuAAC click reaction is successfully employed to synthesize the sequence‐defined multiblock functional copolymers, in which the iterative monomer additions can be easily manipulated under fully open conditions.