A Single-Atom Manipulation Approach for Synthesis of Atomically Mixed Nanoalloys as Efficient Catalysts

Synthesis of well-defined atomically mixed alloy nanoparticles on desired substrates is an ultimate goal for their practical application. Herein we report a general approach for preparing atomically mixed AuPt, AuPd, PtPd, AuPtPd NAs(nanoalloys) through single-atom level manipulation. By utilizing the ubiquitous tendency of aggregation of single atoms into nanoparticles at elevated temperatures, we have synthesized nanoalloys on a solid solvent with CeO₂ as a carrier and transition-metal single atoms as an intermediate state. The supported nanoalloys/CeO₂ with ultra-low noble metal content (containing 0.2 wt % Au and 0.2 wt % Pt) exhibit enhanced catalytic performance towards complete CO oxidation at room temperature and remarkable thermostability. This work provides a general strategy for facile and rapid synthesis of well-defined atomically mixed nanoalloys that can be applied for a range of emerging techniques.     

Revealing the Active Species for Aerobic Alcohol Oxidation by Using Uniform Supported Palladium Catalysts

The active species in supported metal catalysts are elusive to identify, and large quantities of inert species can cause significant waste. Herein, using a stoichiometrically precise synthetic method, we prepare atomically dispersed palladium–cerium oxide (Pd₁/CeO₂) and hexapalladium cluster–cerium oxide (Pd₆/CeO₂), as confirmed by spherical‐aberration‐corrected transmission electron microscopy and X‐ray absorption fine structure spectroscopy. For aerobic alcohol oxidation, Pd₁/CeO₂ shows extremely high catalytic activity with a TOF of 6739 h^?1 and satisfactory selectivity (almost 100 % for benzaldehyde), while Pd₆/CeO₂ is inactive, indicating that the true active species are single Pd atoms. Theoretical simulations reveal that the bulkier Pd₆ clusters hinder the interactions between hydroxy groups and the CeO₂ surface, thus suppressing synergy of Pd‐Ce perimeter.     

Maximum Noble‐Metal Efficiency in Catalytic Materials: Atomically Dispersed Surface Platinum

Platinum is the most versatile element in catalysis, but it is rare and its high price limits large‐scale applications, for example in fuel‐cell technology. Still, conventional catalysts use only a small fraction of the Pt content, that is, those atoms located at the catalyst’s surface. To maximize the noble‐metal efficiency, the precious metal should be atomically dispersed and exclusively located within the outermost surface layer of the material. Such atomically dispersed Pt surface species can indeed be prepared with exceptionally high stability. Using DFT calculations we identify a specific structural element, a ceria “nanopocket”, which binds Pt²⁺ so strongly that it withstands sintering and bulk diffusion. On model catalysts we experimentally confirm the theoretically predicted stability, and on real Pt‐CeO₂ nanocomposites showing high Pt efficiency in fuel‐cell catalysis we also identify these anchoring sites.     

From Metal–Organic Frameworks to Single‐Atom Fe Implanted N‐doped Porous Carbons: Efficient Oxygen Reduction in Both Alkaline and Acidic Media

It remains highly desired but a great challenge to achieve atomically dispersed metals in high loadings for efficient catalysis. Now porphyrinic metal–organic frameworks (MOFs) have been synthesized based on a novel mixed‐ligand strategy to afford high‐content (1.76 wt %) single‐atom (SA) iron‐implanted N‐doped porous carbon (Fe_SA‐N‐C) via pyrolysis. Thanks to the single‐atom Fe sites, hierarchical pores, oriented mesochannels and high conductivity, the optimized Fe_SA‐N‐C exhibits excellent oxygen reduction activity and stability, surpassing almost all non‐noble‐metal catalysts and state‐of‐the‐art Pt/C, in both alkaline and more challenging acidic media. More far‐reaching, this MOF‐based mixed‐ligand strategy opens a novel avenue to the precise fabrication of efficient single‐atom catalysts.     

Thermolysis of Noble Metal Nanoparticles into Electron‐Rich Phosphorus‐Coordinated Noble Metal Single Atoms at Low Temperature

Noble metal single atoms coordinated with highly electronegative atoms, especially N and O, often suffer from an electron‐deficient state or poor stability, greatly limiting their wide application in the field of catalysis. Herein we demonstrate a new PH₃‐promoted strategy for the effective transformation of noble metal nanoparticles (MNPs, M=Ru, Rh, Pd) at a low temperature (400 °C) into a class of thermally stabilized phosphorus‐coordinated metal single atoms (MPSAs) on g‐C₃N₄ nanosheets via the strong Lewis acid–base interaction between PH₃ and the noble metal. Experimental work along with theoretical simulations confirm that the obtained Pd single atoms supported on g‐C₃N₄ nanosheets exist in the form of PdP₂ with a novel electron‐rich feature, conceptionally different from the well‐known single atoms with an electron‐deficient state. As a result of this new electronic property, PdP₂‐loaded g‐C₃N₄ nanosheets exhibit 4 times higher photocatalytic H₂ production activity than the state‐of‐art N‐coordinated PdSAs supported on g‐C₃N₄ nanosheets. This enhanced photocatalytic activity of phosphorus‐coordinated metal single atoms with an electron‐rich state was quite general, and also observed for other active noble metal single atom catalysts, such as Ru and Rh.     

Thermally Stable and Regenerable Platinum–Tin Clusters for Propane Dehydrogenation Prepared by Atom Trapping on Ceria

Ceria (CeO₂) supports are unique in their ability to trap ionic platinum (Pt), providing exceptional stability for isolated single atoms of Pt. The reactivity and stability of single‐atom Pt species was explored for the industrially important light alkane dehydrogenation reaction. The single‐atom Pt/CeO₂ catalysts are stable during propane dehydrogenation, but are not selective for propylene. DFT calculations show strong adsorption of the olefin produced, leading to further unwanted reactions. In contrast, when tin (Sn) is added to CeO₂, the single‐atom Pt catalyst undergoes an activation phase where it transforms into Pt–Sn clusters under reaction conditions. Formation of small Pt–Sn clusters allows the catalyst to achieve high selectivity towards propylene because of facile desorption of the product. The CeO₂‐supported Pt–Sn clusters are very stable, even during extended reaction at 680 °C. Coke formation is almost completely suppressed by adding water vapor to the feed. Furthermore, upon oxidation the Pt–Sn clusters readily revert to the atomically dispersed species on CeO₂, making Pt–Sn/CeO₂ a fully regenerable catalyst.     

Metal–Organic‐Framework‐Derived Hollow N‐Doped Porous Carbon with Ultrahigh Concentrations of Single Zn Atoms for Efficient Carbon Dioxide Conversion

The development of efficient and low energy‐consumption catalysts for CO₂ conversion is desired, yet remains a great challenge. Herein, a class of novel hollow porous carbons (HPC), featuring well dispersed dopants of nitrogen and single Zn atoms, have been fabricated, based on the templated growth of a hollow metal–organic framework precursor, followed by pyrolysis. The optimized HPC‐800 achieves efficient catalytic CO₂ cycloaddition with epoxides, under light irradiation, at ambient temperature, by taking advantage of an ultrahigh loading of (11.3 wt %) single‐atom Zn and uniform N active sites, high‐efficiency photothermal conversion as well as the hierarchical pores in the carbon shell. As far as we know, this is the first report on the integration of the photothermal effect of carbon‐based materials with single metal atoms for catalytic CO₂ fixation.     

Controllable Synthesis of Nearly Monodisperse Spherical Aggregates of CeO2 Nanocrystals and Their Catalytic Activity for HCHO Oxidation

Herein, we report a facile surfactant‐assisted solvothermal synthetic method to prepare nearly monodisperse spherical CeO₂ nanocrystals. A good control of the size of CeO₂ nanocrystals in the range of 100–500 nm was achieved by simply varying the synthetic parameters such as reaction time, volume ratio of ethanol to water (R), molar ratio of PVP, and concentration of Ce(NO₃)₃?6 H₂O in solution. A possible mechanism for the growth of spherical CeO₂ nanocrystals is proposed. The obtained CeO₂ nanocrystals with a surface area of up to 47 m²g^?1 were then employed as a catalyst support. By loading Au‐Pd nanoparticles (about 3 wt. %) onto the CeO₂ support, an Au‐Pd/CeO₂ catalyst was prepared that exhibited high catalytic activity for HCHO oxidation. At the low temperature of 50 °C, the percentage of HCHO conversion was 100 %, suggesting potential applications in preferential oxidation and other catalytic reactions. These Au‐Pd/CeO₂ catalysts may also find applications in indoor formaldehyde decontamination and industrial catalysis. The facile solvothermal method can be extended to the preparation of other metal oxide nanocrystals and provides guidance for size‐ and morphology‐controlled synthesis.     

Non‐metal Single‐Iodine‐Atom Electrocatalysts for the Hydrogen Evolution Reaction

Common‐metal‐based single‐atom catalysts (SACs) are quite difficult to design due to the complex synthesis processes required. Herein, we report a single‐atom nickel iodide (SANi‐I) electrocatalyst with atomically dispersed non‐metal iodine atoms. The SANi‐I is prepared via a simple calcination step in a vacuum‐sealed ampoule and subsequent cyclic voltammetry activation. Aberration‐corrected high‐angle annular dark‐field scanning transmission electron microscopy and synchrotron‐based X‐ray absorption spectroscopy are applied to confirm the atomic‐level dispersion of iodine atoms and detailed structure of SANi‐I. Single iodine atoms are found to be isolated by oxygen atoms. The SANi‐I is structural stable and shows exceptional electrocatalytic activity for the hydrogen evolution reaction (HER). In situ Raman spectroscopy reveals that the hydrogen adatom (H_ads) is adsorbed by a single iodine atom, forming the I‐H_ads intermediate, which promotes the HER process.     

Electroreduction of CO2 on Single‐Site Copper‐Nitrogen‐Doped Carbon Material: Selective Formation of Ethanol and Reversible Restructuration of the Metal Sites

It is generally believed that CO₂ electroreduction to multi‐carbon products such as ethanol or ethylene may be catalyzed with significant yield only on metallic copper surfaces, implying large ensembles of copper atoms. Here, we report on an inexpensive Cu‐N‐C material prepared via a simple pyrolytic route that exclusively feature single copper atoms with a CuN₄ coordination environment, atomically dispersed in a nitrogen‐doped conductive carbon matrix. This material achieves aqueous CO₂ electroreduction to ethanol at a Faradaic yield of 55 % under optimized conditions (electrolyte: 0.1 m CsHCO₃, potential: ?1.2 V vs. RHE and gas‐phase recycling set up), as well as CO electroreduction to C₂‐products (ethanol and ethylene) with a Faradaic yield of 80 %. During electrolysis the isolated sites transiently convert into metallic copper nanoparticles, as shown by operando XAS analysis, which are likely to be the catalytically active species. Remarkably, this process is reversible and the initial material is recovered intact after electrolysis.     

Analysis of Dopant Atom Distribution and Quantification of Oxygen Vacancies on Individual Gd‐Doped CeO2 Nanocrystals

This work reports the analysis of the distribution of Gd atoms and the quantification of O vacancies applied to individual CeO₂ and Gd‐doped CeO₂ nanocrystals by electron energy‐loss spectroscopy. The concentration of O vacancies measured on the undoped system (6.3±2.6 %) matches the expected value given the typical Ce³⁺ content previously reported for CeO₂ nanoparticles. The doped nanoparticles have an uneven distribution of dopant atoms and an atypical amount of O vacant sites (37.7±4.1 %). The measured decrease of the O content induced by Gd doping cannot be explained solely by the charge balance including Ce³⁺ and Gd³⁺ ions.     

Atomically Dispersed Ruthenium Species Inside Metal–Organic Frameworks: Combining the High Activity of Atomic Sites and the Molecular Sieving Effect of MOFs

Incorporating atomically dispersed metal species into functionalized metal–organic frameworks (MOFs) can integrate their respective merits for catalysis. A cage‐controlled encapsulation and reduction strategy is used to fabricate single Ru atoms and triatomic Ru₃ clusters anchored on ZIF‐8 (Ru₁@ZIF‐8, Ru₃@ZIF‐8). The highly efficient and selective catalysis for semi‐hydrogenation of alkyne is observed. The excellent activity derives from high atom‐efficiency of atomically dispersed Ru active sites and hydrogen enrichment by the ZIF‐8 shell. Meanwhile, ZIF‐8 shell serves as a novel molecular sieve for olefins to achieve absolute regioselectivity of catalyzing terminal alkynes but not internal alkynes. Moreover, the size‐dependent performance between Ru₃@ZIF‐8 and Ru₁@ZIF‐8 is detected in experiment and understood by quantum‐chemical calculations, demonstrating a new and promising approach to optimize catalysts by controlling the number of atoms.     

Single-Atom Rh on High-Index CeO2 Facet for Highly Enhanced Catalytic CO Oxidation

Reducible oxide-supported noble metal nanoparticles exhibit high activity in catalyzing many important oxidation reactions. However, atom migration under harsh reaction conditions leads to deactivation of the catalyst. Meanwhile, single-atom catalysts demonstrate enhanced stability, but often suffer from poor catalytic activity owing to the ionized surface states. In this work, we simultaneously address the poor activity and stability issues by synthesizing highly active and durable rhodium (Rh) single-atom catalysts through a “wrap-bake-peel” process. The pre-coated SiO₂ layer during synthesis of catalyst plays a crucial role in not only protecting CeO₂ support against sintering, but also donating electron to weaken the Ce−O bond, producing highly loaded Rh single atoms on the CeO₂ support exposed with high-index {210} facets. Benefiting from the unique electronic structure of CeO₂ {210} facets, more oxygen vacancies are generated along with the deposition of more electropositive Rh single atoms, leading to remarkably improved catalytic performance in CO oxidation.     

Isolated Platinum Atoms Stabilized by Amorphous Tungstenic Acid: Metal–Support Interaction for Synergistic Oxygen Activation

Oxygen activation plays a crucial role in many important chemical reactions such as oxidation of organic compounds and oxygen reduction. For developing highly active materials for oxygen activation, herein, we report an atomically dispersed Pt on WO₃ nanoplates stabilized by in situ formed amorphous H₂WO₄ out‐layer and the mechanism for activating molecular oxygen. Experimental and theoretical studies demonstrate that the isolated Pt atoms coordinated with oxygen atoms from [WO₆] and water of H₂WO₄, consequently leading to optimized surface electronic configuration and strong metal–support interaction (SMSI). In exemplified reactions of butanone oxidation sensing and oxygen reduction, the atomic Pt/WO₃ hybrid exhibits superior activity than those of Pt nanoclusters/WO₃ and bare WO₃ as well as enhanced long‐term durability. This work will provide insight into the origin of activity and stability for atomically dispersed materials, thus promoting the development of highly efficient and durable single atom‐based catalysts.     

Identification of Catalytic Sites for Oxygen Reduction in Metal/Nitrogen‐Doped Carbons with Encapsulated Metal Nanoparticles

The development of metal‐N‐C materials as efficient non‐precious metal (NPM) catalysts for catalysing the oxygen reduction reaction (ORR) as alternatives to platinum is important for the practical use of proton exchange membrane fuel cells (PEMFCs). However, metal‐N‐C materials have high structural heterogeneity. As a result of their high‐temperature synthesis they often consist of metal‐N_x sites and graphene‐encapsulated metal nanoparticles. Thus it is hard to identify the active structure of metal‐N‐C catalysts. Herein, we report a low‐temperature NH₄Cl‐treatment to etch out graphene‐encapsulated nanoparticles from metal‐N‐C catalysts without destruction of co‐existing atomically dispersed metal‐N_x sites. Catalytic activity is much enhanced by this selective removal of metallic nanoparticles. Accordingly, we can confirm the spectator role of graphene‐encapsulated nanoparticles and the pivotal role of metal‐N_x sites in the metal‐N‐C materials for ORR in the acidic medium.     

Single Cobalt Atoms with Precise N‐Coordination as Superior Oxygen Reduction Reaction Catalysts

A new strategy for achieving stable Co single atoms (SAs) on nitrogen‐doped porous carbon with high metal loading over 4 wt % is reported. The strategy is based on a pyrolysis process of predesigned bimetallic Zn/Co metal–organic frameworks, during which Co can be reduced by carbonization of the organic linker and Zn is selectively evaporated away at high temperatures above 800 °C. The spherical aberration correction electron microscopy and extended X‐ray absorption fine structure measurements both confirm the atomic dispersion of Co atoms stabilized by as‐generated N‐doped porous carbon. Surprisingly, the obtained Co‐N_x single sites exhibit superior ORR performance with a half‐wave potential (0.881 V) that is more positive than commercial Pt/C (0.811 V) and most reported non‐precious metal catalysts. Durability tests revealed that the Co single atoms exhibit outstanding chemical stability during electrocatalysis and thermal stability that resists sintering at 900 °C. Our findings open up a new routine for general and practical synthesis of a variety of materials bearing single atoms, which could facilitate new discoveries at the atomic scale in condensed materials.     

Physicochemical and Redox Characteristics of Fe Ion‐doped CeO2 Nanoparticles

We report the structural, thermal, optical, and redox properties of Fe‐doped cerium oxide (CeO₂) nanoparticles, obtained using the polyol‐co‐precipitation process. X‐ray diffraction data reveal the formation of single‐phase structurally isomorphous CeO₂. The presence of Fe³⁺ may act as electron acceptor and/or hole donor, facilitating longer lived charge carrier separation in Fe‐doped CeO₂ nanoparticles as confirmed by optical band gap energy. The increased content of localized defect states in the ceria gap and corresponding shift of the optical absorption edge towards visible range in Fe‐doped samples can significantly improve the optical activity of nanocrystalline ceria. The better‐quality redox performances of the Fe‐doped CeO₂ nanoparticles, compared with undoped CeO₂ nanoparticles, were ascribed mainly to a decrease in band gap energy and an increase in specific surface area of the material. As observed from TPR studies all Fe ‐doped CeO₂ nanoparticles, particularly the 10 mol % Fe doped CeO₂ nanoproduct, exhibit excellent reduction performance.     

Silver Nanoparticles Supported on CeO2‐SBA‐15 by Microwave Irradiation Possess Metal–Support Interactions and Enhanced Catalytic Activity

Metal–support interactions (MSIs) and particle size play important roles in catalytic reactions. For the first time, silver nanoparticles supported on CeO₂‐SBA‐15 supports are reported that possess tunable particle size and MSIs, as prepared by microwave (MW) irradiation, owing to strong charge polarization of CeO₂ clusters (i.e., MW absorption). Characterizations, including TEM, X‐ray photoelectron spectroscopy, and extended X‐ray absorption fine structure, were carried out to disclose the influence of CeO₂ contents on the Ag particle size, MSI effect between Ag nanoparticles and CeO₂‐SBA‐15 supports, and the strong MW absorption of CeO₂ clusters that contribute to the MSIs during Ag deposition. The Ag particle sizes were controllably tuned from 1.9 to 3.9 nm by changing the loading amounts of CeO₂ from 0.5 to 2.0 wt %. The Ag nanoparticle size was predominantly responsible for the high turnover frequency (TOF) of 0.41 min^?1 in ammonia borane dehydrogenation, whereas both particle size and MSIs contributed to the high TOF of 555 min^?1 in 4‐nitrophenol reduction for Ag/0.5CeO₂‐SBA‐15, which were twice as large as those of Ag/SBA‐15 without CeO₂ and Ag/CeO₂‐SBA‐15 prepared by conventional oil‐bath heating.     

Fabrication and characterization of double‐shelled CeO2‐La2O3/Au/Fe3O4 hollow architecture as a recyclable and highly thermal stability nanocatalyst

A novel magnetic binary‐metal‐oxide‐coated nanocataly composing of a hollow Fe₃O₄ core and CeO₂‐La₂O₃ shells with Au nanoparticles encapsulated has been created in this work. The structural features of catalysts were characterized by several techniques, including SEM, TEM, UV‐vis, FTIR, XRD, XPS and TGA analyses. After the coating of CeO₂‐La₂O₃ layer, CeO₂‐La₂O₃/Au/C/Fe₃O₄ microspheres showed a superior thermal stability and catalytic reactivity compared with a pure CeO₂ or La₂O₃ layer. Accompanied by the burning of carbon layer, the specific surface could be increased by the formation of double‐shelled structure. Besides, the desired samples could be separated by magnet, implying the superior recycle performance. Using the reduction of 4‐nitrophenol by NaBH₄ as a model reaction, the microspheres exhibited highly reusability, superior catalytic activity, thermal stability, which are attributed to the unique double‐shelled structure of the support, uniform distribution of Au nanoparticles, the highly thermal stability of CeO₂‐La₂O₃ layer and mixed oxide synergistic effect. As a consequence, the unique nanocatalyst will open a promising way in the fabrication of the double‐shelled hollow binary‐metal‐oxide materials for future research and has great potential in other applications.